Module Pool (tabstrip control Error : )

I am trying to activate tabstrip control in module pool but error is coming like no sub screen is assigned to tabstrip pushbutton
tab12.
my main screen is : 0221
flow logic for 0221 is below :
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN SUB1 INCLUDING SY-REPID '0321'.
CALL SUBSCREEN SUB2 INCLUDING SY-REPID '0322'.
PROCESS AFTER INPUT.
CALL SUBSCREEN SUB1.
CALL SUBSCREEN SUB2.
MODULE USER_COMMAND_0221.
and 0321 and 0322 is subscreen and i also gave ref field sub1 and sub2 .
can you plz help me to solve the problem ?

Hi,
yes i created sub screen. i am going to explain what i have done .
step : i created screen 200 (i choose subscreen)and inside 200 i put tabstripcontrol then in tab1 i gave ref field sub1 and tab2 i gave ref field sub2 and fatch code ic1 and ic2.
and then i created screen 221 and 222.
inside 200 flow logic i wrote below code but still its giving me same error.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN SUB1 INCLUDING SY-REPID '0221'.
CALL SUBSCREEN SUB2 INCLUDING SY-REPID '0222'.
PROCESS AFTER INPUT.
CALL SUBSCREEN SUB1.
CALL SUBSCREEN SUB2.
MODULE USER_COMMAND_0221.
i dont know is it required to make any normal screen .
please try to give me ans as soon as possible.

Similar Messages

How can i decleare select-options in module pool table control?

Hi everybody!!
Can anyone tell me how can I decleare select-options in module pool table control screen?. I have declared it in a screen with a table control but a dump is triggered due to an error when generating the selection screen.
Regards...

My suggestion will be try to use fm
call function 'FREE_SELECTIONS_DIALOG'
Please search this forum you can find lot of threads related to this.
a®

Dynamic text in module pool table control

Hi ,
Can we have dynamic header text in module pool table control. Like dynamic header text in ALV report.
Thanks,
Prem.

Hi,
Populate an internal table with the header text that you want.
Replace the headers with I/O fields.
Populate the Headers in the PBO.

Strange Syntax Error in module pool table control........

Hi Techies ,
In module pool am not able to validate the checkbook field that i have included in the table control screen .
i was able to pass the other field defined in the same structure where checkbox field is declared .

Hi MAX and Glen ,
Thanks for ur answers .
i was not the one developing and i didnt had much touch in TBCL.
Anyways issue resolved , it was sitting outside of TBCL hence i deleted and created new and included the CHK .
now its working .
Positive and quick gestures from you both .

Module pool - table control - update ztable

hello , i doing a module pool that will have few screens , now i have one screen with a table control that fetch the data from a ztable when screen is call the table control is showing the data and is in grey and no editable i add a pf-status for change that mode i can delete the row from the table control but i don't figure out how update to the ztable when i press save , i wan't too another button for add a new row ( and remain the already in grey ) for add new entrie in the table and update the ztable
pd: sorry for my bad english
this is my code:
TOP:
PROGRAM z_pp_lote_etiquetas MESSAGE-ID zz.
TABLES:zc2p_lote_etique,
       zc2p_lider_modul.
DATA: ok_code LIKE sy-ucomm.
DATA save_ok LIKE sy-ucomm.
* internal table
DATA: it_zc2p_lote_etique LIKE STANDARD TABLE OF zc2p_lote_etique.
DATA: it_zc2p_lider_modul TYPE STANDARD TABLE OF zc2p_lider_modul WITH HEADER LINE.
DATA: it_zc2p_lider_modul_del TYPE STANDARD TABLE OF zc2p_lider_modul WITH HEADER LINE.
**************Workarea
DATA: wa_c2p_lote_etique TYPE zc2p_lote_etique.
DATA: wa_c2p_lider_modul TYPE zc2p_lider_modul.
DATA: wa_c2p_lider_modul_del TYPE zc2p_lider_modul.
DATA: sel.
DATA: MARK.
DATA: init.
DATA: col TYPE scxtab_column.
DATA: lines TYPE i.
* Variable Declaration
DATA : flg, "Flag to set the change mode
ln TYPE i. "No. of records
* Table Control Declartion.
CONTROLS: zc2p_lider_crtl TYPE TABLEVIEW USING SCREEN '101'.
**PROCESS BEFORE OUTPUT INCLUDE **
*& Include           Z_PP_LOTE_ETIQUETAS_O01
*& Module set_status OUTPUT
* Setting the GUI status
MODULE status_0100 OUTPUT.
SET PF-STATUS 'Z_PP_LOT_ETIQ_MENU'.
SET TITLEBAR 'Z_PP_LOT_ETIQ'.
ENDMODULE. " set_status OUTPUT screen 100
* MODULE status_0101 OUTPUT
* Setting the GUI status
MODULE status_0101 OUTPUT.
SET PF-STATUS 'Z_PP_LOT_ETIQ_ME_101'.
SET TITLEBAR 'Z_PP_LOT_ETIQ'.
* Data retreving
if init is INITIAL.
select * from zc2p_lider_modul into CORRESPONDING FIELDS OF TABLE it_zc2p_lider_modul.
    DESCRIBE TABLE it_zc2p_lider_modul LINES ln.
    zc2p_lider_crtl-lines = ln + 10.
    init = 'X'.
endif.
ENDMODULE.                    "status_0101 OUTPUT
module change_sdyn_conn output.
* you can change the content of current table control line via
* sdyn_conn
READ TABLE it_zc2p_lider_modul INTO zc2p_lider_modul INDEX zc2p_lider_crtl-current_line.
endmodule.                             " FILL_TABLE_CONTROL OUTPUT
MODULE set_screen_fields OUTPUT.
LOOP AT SCREEN.
IF flg IS INITIAL.
screen-input = 0.
ELSE.
screen-input = 1.
ENDIF.
*ENDIF.
* Modifying the screen after making changes
MODIFY SCREEN.
ENDLOOP.
ENDMODULE. " set_screen_fields OUTPUT
PROCESS AFTER INPUT INCLUDE.
* MODULE USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
    WHEN 'LIDM'.
      CALL SCREEN 101.
    WHEN 'CANC'.
      LEAVE PROGRAM.
    WHEN 'BACK'.
      LEAVE PROGRAM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                    "USER_COMMAND_0100 INPUT
* MODULE USER_COMMAND_0101 INPUT
MODULE user_command_0101 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'SORT'.
      DATA: fldname(100),help(100).
      READ TABLE zc2p_lider_crtl-cols INTO col WITH KEY selected = 'X'.
      SPLIT col-screen-name AT '-' INTO help fldname.
      SORT it_zc2p_lider_modul BY (fldname).
    WHEN 'CHANGE'.
* Setting the flag to make the table control in editable mode[excluding
* primary key].
      flg = 'Y'.
    WHEN 'BACK'.
      CALL SCREEN 100.
      LEAVE SCREEN.
    WHEN 'CANCEL'.
      LEAVE PROGRAM.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
    WHEN 'SAVE'.
      MODIFY zc2p_lider_modul FROM it_zc2p_lider_modul.
      COMMIT WORK.
ENDCASE.
ENDMODULE.                    "USER_COMMAND_0101 INPUT
* MODULE read_table_control INPUT
MODULE read_table_control INPUT.
* Check input values
IF mark = 'X' AND save_ok = 'DELETE'.
    DELETE TABLE it_zc2p_lider_modul FROM zc2p_lider_modul.
    DESCRIBE TABLE it_zc2p_lider_modul LINES zc2p_lider_crtl-lines.
ENDIF.
ENDMODULE.                             " READ_TABLE_CONTROL INPUT
Screen Flow Logic 100
PROCESS BEFORE OUTPUT.
MODULE status_0100.
PROCESS AFTER INPUT.
MODULE user_command_0100.
Screen Flow Logic 101.
PROCESS BEFORE OUTPUT.
MODULE status_0101.
LOOP AT it_zc2p_lider_modul INTO zc2p_lider_modul WITH CONTROL
zc2p_lider_crtl.
* Dynamic screen modifications
    MODULE set_screen_fields.
    MODULE change_sdyn_conn.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_0101.
LOOP AT it_zc2p_lider_modul.
    MODULE read_table_control.
ENDLOOP.
i hope somebody can help for what i missing here thanks

>
Sanjeev Kumar wrote:
> Hello Edgar,
>
> Problem seems to be there in the flow logic of 101
>
>
> PROCESS BEFORE OUTPUT.
>   MODULE status_0101.
>   LOOP AT it_zc2p_lider_modul INTO zc2p_lider_modul WITH CONTROL
> zc2p_lider_crtl. " no need to have 'INTO zc2p_lider_modul' above
> * Dynamic screen modifications
>     MODULE set_screen_fields.
>     MODULE change_sdyn_conn.
>   ENDLOOP.
> *
> PROCESS AFTER INPUT.
>   MODULE user_command_0101. "this should be shifted after the following LOOP...ENDLOOP.
>
>   LOOP AT it_zc2p_lider_modul. "need to have 'WITH CONTROL zc2p_lider_crtl' here
>     MODULE read_table_control.
>   ENDLOOP.
>
>
>
> With MODULE user_command_0101 call before the LOOP calls the MODIFY statement (under case save_ok 'SAVE') first and Z-table is updated with the old values as the changes are transferred from screen into the internal table it_zc2p_lider_modul in the LOOP...ENDLOOP later.
>
> Try these changes and I hope it will work.
>
> Thanks
> Sanjeev
i do the firts advice but the second one i get syntax error :
my code :
PROCESS AFTER INPUT.
LOOP at it_zc2p_lider_modul WITH CONTROL zc2p_lider_crtl.
    MODULE read_table_control.
ENDLOOP.
   MODULE user_command_0101.
error :
In the event PROCESS AFTER INPUT, no additions are allowed with "LOOP
AT".

Module Pool - Table Control - Data not getting displayed in Control

Hi,
I have a table contol in my module pool program. In my processing I am filling an internal table & then in my PBO I am linking the internal table to table control. The issue is that even though the internal table is getting filled correctly (found through debugging), the data is not getting populated in table control. Nothing is populated on screen. I am writing part of code below
Declaration:
Types: begin of ty_control,
        SELECTED TYPE C,
        TEXT TYPE DPR_CAUSE_T-TEXT,
      end of ty_control.
CONTROLS : TBL_CONT TYPE TABLEVIEW USING SCREEN '9001'.
DATA:       lt_table_cont type TABLE OF ty_control with header line.
Fields in TBL_CONT:
   TBL_CONT-SELECTED
TBL_CONT-TEXT
PBO Flow Logic:
MODULE STATUS_9001.
MODULE fill_data.
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
ENDLOOP.
PAI Flow Logic:
Loop at lt_table_cont.
   MODULE UPDATE_DATA.
endloop.
MODULE USER_COMMAND_9001.
PLZ let me know what might be the problem. I have been trying to figure out but cant.
Thanks.

Hi Sonali,
           When ever you need to do anything with the table control, i mean if u want to display data in table control or you want to validate the data entered in table control Should be done within Loop and Endloop.(PBO or PAI's which ever is appropriate)
Here the data is not bieng displayed in ur table control because you have not used the MODULE fill_data between
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
ENDLOOP.
so do it like this
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
MODULE fill_data
ENDLOOP.
this will solve your problem.
Regards,
Syed

Module Pool table controle row level prob

Hi Experts,
I am working in a module pool program where in table controle i want a perticular row should become in display mode if a specific field is NE SPACE. is it possible if possible than please sugest me how.
Thanks and Regards,
D Tarun Kumar

In this case all the rows will be in display mode
Exactly My Requirement I am describing with example
Suppose in table control I have three Records and the first field is main field which is if initial than the row should in change mode otherwise is should be in display mode.
Field1          Field2          Field3          Field4          Field5
1abc2          1abc3          1abc4          1abc5          Record 1
2xyz1          2xyz2          2xyz3          2xyz4          2xyz5          Record 2
3pqr2          3pqr3          3pqr4          3pqr5          Record 3
So here the second rowu2019s first field is not initial so I need here in table control the second row should be in display mode and next first and second row should be in change mode.
Now You tell me is it possible or not if possible than please suggest me what I have to do
Thanks & regards,
D Tarun Kumar
Edited by: Devalla T Kumar on Oct 24, 2009 9:17 AM

Module pool-Custom controls

Hi,
Cany any one tell me with example how we will use the customccontrols in module pool program..Why it is used

I got answer, i am using same editor for displaying all the custom controls.
i.e. was the problem.
anyway Thanks for looking into this issue.

Re: Module Pool Type Conversion Error.

Hi,
I have used the screen fields
quantity parameter of type imseg-erfmg
pmeins parameter of type imseg-erfme.
while conversion.. i am passing the value
lbbes-erfmg to quantity
and lbbes-erfme to pmeins
when the conversion is done the lbbes-erfmg has negative value and when fed into the screen
it creates dump.
can anyone help me.
Thanks & Regards
Guhapriyan Subrahmanyam

hi,
We have the specify the reference field for the field in table control. Otherwise, we get a short dump showing an error conv_to_number.
To avoid this, we need to set the reference field in the properties of the field in table control.
Double click on the field of table control, we get the properties window opened, in it specify the reference field there.
There is an other simple way to avoid this dump. Select the field of the table contorl and in the TEXT inputbox which exists on the top right of the window, set last letter as _______V But in this case, we get the values justified to the right.
Regards,
Sailaja.

Module pool - tabstrip

hi frnd,
i have a problem in tabstrips . by filling the tab details , one of mandatory field 'ref-field' is asking.
what should we mention in the ref-fied ?

hi.....
Refrence field is nothing but tha name of your subscreen area.
If you are using a common subscreen ara for all your tabs then mention tha name of tha same subscreen area.
If for Each tab you are using a diffrent subscreen area then mention the name of diffrent subscren areas.
reference field will hepl you to navigate between you tabs.thats important.

Module Pool Nested Screen Error

Hi All,
I have 6 screens in my APP. I have used Set Screen 0 then call screen XXX to set another screen. However after certain usage it gives me an error stating 'You requested two many consecutive nested call screen'.
Can anybody help me on this.
Thankx in Adv.

Hi Sanjay,
As You Set the Screen as 0. The below that just give levae screen So that from the screen from which u r leaving out is closed... so that u can have some restricted number of screens in used. At that time u will not be given any run time error. ok
All the best.
Murthy

Module pool + Tabe control

I have a Table control where i have certain field which is editable.Now i need to check which row i have changed.Where can i get the particular row number.

Hi Pankaj,
It is possible..
If Tab_control is the name of the table control variable, then
Tab_control-current_line will give you the current line which is getting edited.
Regards,
Amit.

What is the use of table control in bdc is it same in module pool table con

Hi,
What is the use of table control in bdc is it same in module pool table control?
regards
eswar

Hi,
Table control means it contains as table and it will scroll in vertical and horizontal.
In module pool by using screen we can create new table control.
But BDC table control means here we can populate the data into the table control.
i.e.if you take VA01 for sales order creation in the belwo of VA01 screen there is table control for the filling of material details so here we will write the code to populate the data into the table control screen.
Thanks and regards,
shyla

Module pool in table control wizared

Hi
I have created in module pool table control wizared created insert and delete rows in output.
insert the data in table control the colume is not save.
can u tell me the save the data in table control.
pls tell me the flow of save button.
after insert the record how to save the data in table control wizard in module pool.
can u tell me the save button functionality.
after save data will add in table.

Hi Venkat,
I think you have already posted this query with the subject line "Table control" with the thread below today.
table control
Try with the online link we have provided you will learn that way on your own.
Nobody here will write the whole logic for you.
Try to put in your efforts.
Regards
Abhii
Edited by: Abhii on Sep 8, 2010 3:13 PM

How to insert tabstrip control in module pool screen painter

Hi all!
plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.

To insert tabstrip just open layout of screen and press on the tabstrip button there .
Use this souce code further to activate it .
CONTROLS tabstrip TYPE TABSTRIP.
DATA: okcode TYPE sy-ucomm,
dynnr TYPE sy-dynnr,
flag type flag,
active like tabstrip-activetab .
call SCREEN 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
data: lv_okcode type syucomm.
lv_okcode = okcode.
clear okcode.
case lv_okcode.
WHEN 'TAB1'.
dynnr = '0110'.
WHEN 'TAB2'.
dynnr = '0120'.
WHEN 'TAB3'.
dynnr = '0130'.
WHEN 'TAB4'.
dynnr = '0140'.
WHEN 'TAB5'.
"check authorization, if authorization fails
flag = 'X'. "set the global flag
active = 'TAB1'. "store active tab in global variable
dynnr = '0110'. "set the screen number
WHEN 'BACK' or 'EXIT'.
leave program.
ENDCASE.
IF lv_okcode(3) = 'TAB'.
tabstrip-activetab = lv_okcode.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
IF tabstrip-activetab IS INITIAL OR
dynnr IS INITIAL.
tabstrip-activetab = 'TAB1'.
dynnr = '0110'.
ENDIF.
"set the activetab explicilty here
if flag eq 'X'. "from authorization failure
tabstrip-activetab = active. "'TAB1'
clear flag.
endif.
ENDMODULE. " STATUS_0100 OUTPUT

Module Pool (tabstrip control Error : )

Similar Messages

Maybe you are looking for