Module pool - tabstrip
hi frnd,
i have a problem in tabstrips . by filling the tab details , one of mandatory field 'ref-field' is asking.
what should we mention in the ref-fied ?
hi.....
Refrence field is nothing but tha name of your subscreen area.
If you are using a common subscreen ara for all your tabs then mention tha name of tha same subscreen area.
If for Each tab you are using a diffrent subscreen area then mention the name of diffrent subscren areas.
reference field will hepl you to navigate between you tabs.thats important.
Similar Messages
-
Module Pool (tabstrip control Error : )
I am trying to activate tabstrip control in module pool but error is coming like no sub screen is assigned to tabstrip pushbutton
tab12.
my main screen is : 0221
flow logic for 0221 is below :
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN SUB1 INCLUDING SY-REPID '0321'.
CALL SUBSCREEN SUB2 INCLUDING SY-REPID '0322'.
PROCESS AFTER INPUT.
CALL SUBSCREEN SUB1.
CALL SUBSCREEN SUB2.
MODULE USER_COMMAND_0221.
and 0321 and 0322 is subscreen and i also gave ref field sub1 and sub2 .
can you plz help me to solve the problem ?Hi,
yes i created sub screen. i am going to explain what i have done .
step : i created screen 200 (i choose subscreen)and inside 200 i put tabstripcontrol then in tab1 i gave ref field sub1 and tab2 i gave ref field sub2 and fatch code ic1 and ic2.
and then i created screen 221 and 222.
inside 200 flow logic i wrote below code but still its giving me same error.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN SUB1 INCLUDING SY-REPID '0221'.
CALL SUBSCREEN SUB2 INCLUDING SY-REPID '0222'.
PROCESS AFTER INPUT.
CALL SUBSCREEN SUB1.
CALL SUBSCREEN SUB2.
MODULE USER_COMMAND_0221.
i dont know is it required to make any normal screen .
please try to give me ans as soon as possible. -
How to insert tabstrip control in module pool screen painter
Hi all!
plz tell e how to use tabstrip control in module pool screen painter.Also plz give me an example program using tabstrip control.To insert tabstrip just open layout of screen and press on the tabstrip button there .
Use this souce code further to activate it .
CONTROLS tabstrip TYPE TABSTRIP.
DATA: okcode TYPE sy-ucomm,
dynnr TYPE sy-dynnr,
flag type flag,
active like tabstrip-activetab .
call SCREEN 100.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
data: lv_okcode type syucomm.
lv_okcode = okcode.
clear okcode.
case lv_okcode.
WHEN 'TAB1'.
dynnr = '0110'.
WHEN 'TAB2'.
dynnr = '0120'.
WHEN 'TAB3'.
dynnr = '0130'.
WHEN 'TAB4'.
dynnr = '0140'.
WHEN 'TAB5'.
"check authorization, if authorization fails
flag = 'X'. "set the global flag
active = 'TAB1'. "store active tab in global variable
dynnr = '0110'. "set the screen number
WHEN 'BACK' or 'EXIT'.
leave program.
ENDCASE.
IF lv_okcode(3) = 'TAB'.
tabstrip-activetab = lv_okcode.
ENDIF.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
IF tabstrip-activetab IS INITIAL OR
dynnr IS INITIAL.
tabstrip-activetab = 'TAB1'.
dynnr = '0110'.
ENDIF.
"set the activetab explicilty here
if flag eq 'X'. "from authorization failure
tabstrip-activetab = active. "'TAB1'
clear flag.
endif.
ENDMODULE. " STATUS_0100 OUTPUT -
My Image Getting Scrolled in Tabstrip Change or Pagedown in Module Pool
Hi All ,
I have designed a module pool with Tabstrip . On the Top i have displayed image . My Tab1 is for Coversion , Tab2 is for Interface . When Click on the Interface Tab and Press page down the image also scrolls down and gets displayed in the Mid of the screen and when i press ESC button iimage goes to its normal position . I have created a Custom Container , I have also tried making a subscreen and display image but still same results . Please help me out in this ..
Thanks & Regards
Shankar
Edited by: Shankar SB on May 24, 2011 12:46 AMSEARCH in SCn before posting you will get so many threads like these.
[Image in module-pool|https://forums.sdn.sap.com/click.jspa?searchID=24201936&messageID=3844659] -
How to create subscreens in tabstrip control using module pool
hai experts,
can u plz give me step by step procedure to create subscreens in tabstrip control using module pool,hi,
You can check this program
<b> DEMO_DYNPRO_TABSTRIP_LOCAL </b>
This will help you in understanding the concept and how to create subscreens.
Regards
Nishant -
Module pool. error while navigating between tabs in tabstrip
Hi all,
in the module pool program, when i navigate from one tab to another it is giving me an error saying "Illegal value when compressing the screen". what might be the reason?
ThanksHi,
Check out the dimensions of the subscreen. May be its bigger than your subscreen area.
Regards,
Naga Sai Swapna -
Getting error while calling a subscreen in module pool program
HI ALL,
ACTUALLY I'M GETTING A SYNTAX ERROR WHILE I'M CALLING A SUBSCREEN
IN A MODULE POOL PROGRAM IN PAI MODULE
THE ERROR IS AS FOLLOW
"." or "ID ... FIELD ..." expected after "SUBSCREEN"
CAN ANYBODY PLS HELP ME.
REGARDS
ANDREWSHI MAX ,
THE CODE IS AS FOLLOWS:
*& Report ZTABSTRIP_PS
REPORT ZTABSTRIP_PS.
type-pools : vrm.
DATA:number1 type I,
number2 type I,
result type I,
ok_code like SY-UCOMM,
employee1 type c,
ABAP(19) type c,
SALES(19) type c,
HR(19) type c,
MM(19) type c,
employee type c.
emp type c.
CONTROLS tabstrip TYPE TABSTRIP.
CALL SCREEN 100.
call screen 110.
call screen 130.
call screen 120.
call screen 140.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
CASE OK_CODE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
when 'TAB1'.
tabstrip-activetab = 'TAB1'.
when 'TAB2'.
tabstrip-activetab = 'TAB2'.
result = number1 + number2.
when 'TAB3'.
tabstrip-activetab = 'TAB3'.
SET TITLEBAR 'TITLE1'.
when 'TAB4'.
tabstrip-activetab = 'TAB4'.
if employee = 'NEERAJ'.
ABAP = 'NEERAJ'.
elseif employee = 'UMESH'.
SALES = 'UMESH'.
ELSEIF employee = 'RAM'.
HR = 'RAM'.
elseif employee = 'ANIL'.
MM = 'ANIL'.
endif.
employee = employee.
WHEN 'BACK'.
leave PROGRAM.
when 'EXIT' or 'DELETE'.
leave to screen 0.
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
ENDCASE.
WHEN 'BACK' or 'EXIT' or 'DELETE'.
leave program .
WHEN 'SAVE'.
MESSAGE 'please choose a valid function' TYPE 'I'.
endcase.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0110 OUTPUT
text
**MODULE STATUS_0110 OUTPUT.
SET PF-STATUS 'STATUS1'.
SET TITLEBAR 'xxx'.
**case ok_code.
**WHEN 'back' or 'exit' or 'delete'.
leave PROGRAM.
WHEN 'save'.
MESSAGE 'please choose a valid function ' TYPE 'W'.
ENDCASE.
**ENDMODULE. " STATUS_0110 OUTPUT
*& Module USER_COMMAND_0110 INPUT
text
MODULE USER_COMMAND_0110 INPUT.
number1 = number1.
number2 = number2.
CLEAR NUMBER1.
CLEAR NUMBER2.
REFRESH NUMBER1.
REFRESH NUMBER2.
ENDMODULE. " USER_COMMAND_0110 INPUT
*& Module STATUS_0130 OUTPUT
text
MODULE STATUS_0130 OUTPUT.
SET PF-STATUS 'STATUS2'.
SET TITLEBAR 'xxx'.
RESULT = number1 + number2.
*CLEAR RESULT.
REFRESH RESULT.
ENDMODULE. " STATUS_0130 OUTPUT
*& Module STATUS_0120 OUTPUT
text
MODULE STATUS_0120 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values,
l_value LIKE LINE OF li_list.
l_value-key = '1'.
l_value-text = 'ANIL'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '2'.
l_value-text = 'RAM'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '3'.
l_value-text = 'NEERAJ'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_value-key = '4'.
l_value-text = 'UMESH'.
APPEND l_value TO li_list.
CLEAR l_value.
CLEAR li_list.
l_name = 'employee'.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
ID = l_name
VALUES = li_list
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR li_list.
ENDMODULE. " STATUS_0120 OUTPUT
*& Module USER_COMMAND_0120 INPUT
text
MODULE USER_COMMAND_0120 INPUT.
INCLUDING sy-repid '140'.
employee1 = employee.
IF employee1 CS 'NEERAJ'.
call SUBSCREEN sub4 .
ABAP = 'NEERAJ'.
CLEAR ABAP.
ELSEIF employee1 CS 'UMESH'.
call SUBSCREEN sub4 .
SALES = 'UMESH'.
CLEAR SALES.
elseif employee1 CS 'RAM'.
call SUBSCREEN sub4 .
HR = 'RAM'.
CLEAR HR.
ELSEIF employee1 CS 'ANIL'.
call SUBSCREEN sub4 .
MM = 'ANIL'.
CLEAR MM.
endif.
ENDMODULE. " USER_COMMAND_0120 INPUT
*& Module STATUS_0140 OUTPUT
text
MODULE STATUS_0140 OUTPUT.
*CASE OK_CODE.
WHEN employee1 'NEERAJ'.
screen-active = 1.
ABAP = 'NEERAJ'.
WHEN employee1 = 'UMESH'.
screen-active = 1.
SALES = 'UMESH'.
WHEN employee1 = 'RAM'.
screen-active = 1.
HR = 'RAM'.
WHEN employee1 = 'ANIL'.
screen-active = 1.
MM = 'ANIL'.
endif.
*ENDCASE.
ENDMODULE. " STATUS_0140 OUTPUT -
Screen Programming(Module Pool ) using Abap Objects
Hi gurus.,
I need to create a module pool program with tabstrips and tablecontrols using Abap objects...plz guide me how i can achieve this... i am very much confused.. i dont know how and where to start .. plz send me documents and sample codes related to this topic..Also hoe i can implement f4 help in screen fields..
Regards.,
S.SivakumarHi Sivakumar,
Go through the following links:
[url]http://www.savefile.com/download/156691?PHPSESSID=c49d6bed6630d830f3270f7eab51e547 [url]
[url]http://www.sapdb.info/category/sap-ebooks[url]
[url]http://sap.niraj.tripod.com/id25.html[url]
[url]http://abaplovers.blogspot.com/2008/03/sap-abap-tutorial-module-pool_17.html[url]
Thank you,
Prasad G.V.K
Edited by: Craig Cmehil on Jul 1, 2008 9:48 PM -
Module Pool Programming using Abap Objects
Hi gurus.,
I need to create a module pool program with tabstrips and tablecontrols using Abap objects...plz guide me how i can achieve this... i am very much confused.. i dont know how and where to start .. plz send me documents and sample codes related to this topic..Also hoe i can implement f4 help in screen fields.. plz help me with Sample Code....
Regards.,
S.SivakumarHi Marcelo Ramos.,
here is my code without using WebLOg ..
PROGRAM ZACR018_BOXKOD .
TABLES DECLARATION
TABLES: ZACT02_BOXKOD, ZACS018_STR, MARA.
CONTROLS TABC TYPE TABLEVIEW USING SCREEN 102.
END OF TABLES DECLARATION
DEFINE DYN_DECLARE_CREATE.
DATA: &1 TYPE REF TO &2.
CREATE OBJECT &1.
END-OF-DEFINITION.
CONSTANTS C_WERKS TYPE WERKS_D VALUE '7600'.
CONSTANTS C_REPID TYPE SY-REPID VALUE SY-REPID.
CONSTANTS C_VERID TYPE VERID VALUE '0001'.
CONSTANTS C_MDV01 TYPE MDV01 VALUE 'F3LB02'.
CLASS CL_TABLE_CONTROL DEFINITION.
PUBLIC SECTION.
CLASS-DATA: IT_C_DISPLAY TYPE STANDARD TABLE OF ZACS018_STR.
CLASS-DATA: WA_DISPLAY TYPE ZACS018_STR.
CLASS-DATA: WA_COLS LIKE LINE OF TABC-COLS.
CLASS-METHODS M1 IMPORTING WA_C_DISPLAY TYPE ZACS018_STR EXPORTING ZACS018_STR_C TYPE ZACS018_STR.
CLASS-METHODS M2 IMPORTING ZACS018_STR_C TYPE ZACS018_STR CHANGING IT_C_DISPLAY LIKE IT_C_DISPLAY.
CLASS-METHODS M3 IMPORTING SAVE_OK TYPE SY-UCOMM CHANGING C_TABC TYPE CX_TABLEVIEW.
CLASS-METHODS M4 IMPORTING MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
SAVE_OK TYPE SY-UCOMM
CHANGING C_TABC TYPE CX_TABLEVIEW.
ENDCLASS.
CLASS CL_TABLE_CONTROL IMPLEMENTATION.
METHOD M1.
ZACS018_STR_C = WA_C_DISPLAY.
ENDMETHOD.
METHOD M2.
DESCRIBE TABLE IT_C_DISPLAY.
IF TABC-CURRENT_LINE > SY-TFILL.
APPEND ZACS018_STR_C TO IT_C_DISPLAY.
ELSE.
MODIFY IT_C_DISPLAY FROM ZACS018_STR_C INDEX TABC-CURRENT_LINE.
ENDIF.
ENDMETHOD.
METHOD M3.
IF SAVE_OK = 'CHECK'.
LOOP AT C_TABC-COLS INTO WA_COLS.
IF WA_COLS-SCREEN-GROUP2 = 'BOT'.
WA_COLS-SCREEN-INPUT = 0.
MODIFY C_TABC-COLS FROM WA_COLS INDEX SY-TABIX.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT C_TABC-COLS INTO WA_COLS.
IF WA_COLS-SCREEN-GROUP2 = 'BOT'.
WA_COLS-SCREEN-INPUT = 1.
MODIFY C_TABC-COLS FROM WA_COLS INDEX SY-TABIX.
ENDIF.
ENDLOOP.
ENDIF.
ENDMETHOD.
METHOD M4.
IF MASTER_PATTERN IS INITIAL OR PATTERNSLNO IS INITIAL.
LOOP AT C_TABC-COLS INTO WA_COLS.
IF WA_COLS-SCREEN-GROUP2 = 'BOT'.
WA_COLS-SCREEN-INPUT = 0.
MODIFY C_TABC-COLS FROM WA_COLS INDEX SY-TABIX.
ENDIF.
ENDLOOP.
ELSE.
IF SAVE_OK NE 'CHECK'.
LOOP AT C_TABC-COLS INTO WA_COLS.
IF WA_COLS-SCREEN-GROUP2 = 'BOT'.
WA_COLS-SCREEN-INPUT = 1.
MODIFY C_TABC-COLS FROM WA_COLS INDEX SY-TABIX.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDMETHOD.
ENDCLASS.
INTERFACE I_DATA.
DATA: WA_MARA TYPE MARA.
DATA: WA_MARC TYPE MARC.
DATA: WA_MAST TYPE MAST.
DATA: WA_STKO TYPE STKO.
DATA: WA_MKAL TYPE MKAL.
DATA: IT_STPOX TYPE STANDARD TABLE OF STPOX.
DATA: WA_STPOX TYPE STPOX.
DATA: WA_ZACT02_BOXKOD TYPE ZACT02_BOXKOD.
DATA: IT_C_DISPLAY TYPE STANDARD TABLE OF ZACS018_STR.
DATA: IT_SORT_DISPLAY TYPE STANDARD TABLE OF ZACS018_STR.
DATA: WA_DISPLAY TYPE ZACS018_STR.
DATA: W_YIELD(5) TYPE P DECIMALS 2.
METHODS PARTNO_VAL IMPORTING PARTCODE TYPE ZACS018_STR-PARTCODE.
METHODS MAINBI_VAL IMPORTING MAINB TYPE ZACS018_STR-MAINB.
METHODS CAVITY_VAL IMPORTING CAVITY TYPE ZACS018_STR-CAVITY.
METHODS GET_COMP_WT IMPORTING PARTCODE TYPE ZACS018_STR-PARTCODE EXPORTING GROSSWT TYPE ZACS018_STR-GROSSWT.
METHODS NETWT_VAL IMPORTING NETWT TYPE ZACS018_STR-NETWT GROSSWT TYPE ZACS018_STR-GROSSWT.
METHODS MASPAT_VAL IMPORTING MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN.
METHODS PATSLNO_VAL IMPORTING PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN .
METHODS MAX_REF EXPORTING VERSNO TYPE ZACT02_BOXKOD-VERSNO.
METHODS NOOFBOX_VAL IMPORTING BMSCH TYPE ZACT02_BOXKOD-BMSCH.
METHODS TOTTIME_VAL IMPORTING VGW01 TYPE ZACT02_BOXKOD-VGW01.
METHODS TOTRUNWT IMPORTING IT_C_DISPLAY LIKE IT_C_DISPLAY
EXPORTING W_SUM_RUNWT LIKE ZACS018_STR-NETWT.
METHODS TOTCOMP_WT IMPORTING IT_C_DISPLAY LIKE IT_C_DISPLAY
EXPORTING W_SUM_COMPWT LIKE ZACS018_STR-NETWT.
METHODS CHECK_OK IMPORTING SAVE_OK TYPE SY-UCOMM.
METHODS SCREEN_DISPLAY IMPORTING MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
SAVE_OK TYPE SY-UCOMM.
METHODS DUP_CHECK IMPORTING IT_C_DISPLAY LIKE IT_C_DISPLAY.
METHODS BOX_YLD IMPORTING W_SUM_COMPWT LIKE ZACS018_STR-NETWT
W_TOT_WT LIKE ZACS018_STR-NETWT
EXPORTING W_YIELD LIKE W_YIELD.
ENDINTERFACE.
CLASS CL_CONTROL_EVENTS DEFINITION.
PUBLIC SECTION.
CLASS-DATA: C_WERKS TYPE WERKS_D VALUE C_WERKS.
INTERFACES I_DATA.
ENDCLASS.
CLASS CL_CONTROL_EVENTS IMPLEMENTATION.
METHOD I_DATA~PARTNO_VAL.
SELECT SINGLE * FROM MARA INTO I_DATA~WA_MARA WHERE MATNR = PARTCODE.
IF SY-SUBRC <> 0.
MESSAGE TEXT-001 TYPE 'E'.
ELSE.
IF I_DATA~WA_MARA-MTART NE 'HALB'.
MESSAGE TEXT-002 TYPE 'E'.
ENDIF.
SELECT SINGLE * FROM MARC INTO I_DATA~WA_MARC WHERE MATNR = PARTCODE AND
WERKS = C_WERKS.
IF SY-SUBRC <> 0.
MESSAGE TEXT-003 TYPE 'E'.
ELSE.
IF I_DATA~WA_MARC-FEVOR NE 'KOD'.
MESSAGE TEXT-004 TYPE 'E'.
ENDIF.
ENDIF.
ENDIF.
SELECT SINGLE * FROM MKAL INTO I_DATA~WA_MKAL WHERE MATNR = PARTCODE AND
WERKS = C_WERKS AND
VERID = C_VERID AND
MDV01 = C_MDV01.
IF SY-SUBRC <> 0.
MESSAGE TEXT-028 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~CAVITY_VAL.
SET CURSOR FIELD 'ZACS018_STR-CAVITY' LINE SY-STEPL.
IF CAVITY IS INITIAL.
MESSAGE TEXT-005 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~MAINBI_VAL.
SET CURSOR FIELD 'ZACS018_STR-MAINB' LINE SY-STEPL.
IF MAINB IS INITIAL.
MESSAGE TEXT-006 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~GET_COMP_WT.
SET CURSOR FIELD 'ZACS018_STR-PARTCODE' LINE SY-STEPL.
*SELECT SINGLE MAST~MATNR
MAST~WERKS
MAST~STLAL
STKO~DATUV
INTO (I_DATAWA_MAST-MATNR,I_DATAWA_MAST-WERKS,I_DATAWA_MAST-STLAL,I_DATAWA_STKO-DATUV)
FROM MAST AS MAST INNER JOIN STKO AS STKO
ON STKOSTLNR = MASTSTLNR AND STKOSTLAL = MASTSTLAL
WHERE MAST~MATNR = PARTCODE AND
STKO~STLST = '1' AND
STKO~STLTY = 'M' AND
STKO~LKENZ = '' AND
STKO~LOEKZ = ''.
SELECT SINGLE * FROM MAST INTO I_DATA~WA_MAST WHERE MATNR = PARTCODE AND
STLAN = '1' AND
STLAL = '01' AND
WERKS = C_WERKS.
IF SY-SUBRC <> 0.
MESSAGE TEXT-009 TYPE 'E'.
ENDIF.
*CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 50
TEXT = TEXT-007.
*WAIT UP TO 2 SECONDS.
REFRESH I_DATA~IT_STPOX.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
FTREL = 'X'
ALEKZ = ' '
ALTVO = ' '
AUFSW = ' '
AUMGB = ' '
AUMNG = 0
AUSKZ = 'X'
AMIND = ' '
BAGRP = ' '
BEIKZ = ' '
BESSL = ' '
BGIXO = 'X'
BREMS = 'X'
CAPID = 'PP01'
CHLST = ' '
COSPR = ' '
CUOBJ = 000000000000000
CUOVS = 0
CUOLS = ' '
DATUV = SY-DATUM
DELNL = SPACE
DRLDT = ' '
EHNDL = '1'
EMENG = 0
ERSKZ = ' '
ERSSL = ' '
FBSTP = ' '
KNFBA = ' '
KSBVO = ' '
MBWLS = ' '
MKTLS = 'X'
MDMPS = ' '
MEHRS = ' '
MKMAT = ' '
MMAPS = ' '
SALWW = ' '
SPLWW = ' '
MMORY = '0'
MTNRV = PARTCODE
NLINK = ' '
POSTP = ' '
RNDKZ = ' '
RVREL = ' '
SANFR = ' '
SANIN = ' '
SANKA = ' '
SANKO = ' '
SANVS = ' '
SCHGT = ' '
STKKZ = ' '
STLAL = '01'
STLAN = '1'
STPST = 0
SVWVO = 'X'
WERKS = C_WERKS
NORVL = ' '
MDNOT = ' '
PANOT = ' '
QVERW = ' '
VERID = ' '
VRSVO = 'X'
IMPORTING
TOPMAT =
DSTST =
TABLES
STB = I_DATA~IT_STPOX
MATCAT =
EXCEPTIONS
ALT_NOT_FOUND = 1
CALL_INVALID = 2
MATERIAL_NOT_FOUND = 3
MISSING_AUTHORIZATION = 4
NO_BOM_FOUND = 5
NO_PLANT_DATA = 6
NO_SUITABLE_BOM_FOUND = 7
CONVERSION_ERROR = 8
OTHERS = 9
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT I_DATA~IT_STPOX INTO I_DATA~WA_STPOX.
SELECT SINGLE FEVOR FROM MARC INTO I_DATA~WA_MARC-FEVOR WHERE MATNR = I_DATA~WA_STPOX-IDNRK AND
WERKS = I_DATA~WA_STPOX-WERKS AND
FEVOR = 'MLT'.
IF SY-SUBRC EQ 0.
GROSSWT = I_DATA~WA_STPOX-MNGLG.
EXIT.
ELSE.
CLEAR GROSSWT.
ENDIF.
ENDLOOP.
IF GROSSWT IS INITIAL.
MESSAGE TEXT-008 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~NETWT_VAL.
SET CURSOR FIELD 'ZACS018_STR-NETWT' LINE SY-STEPL.
IF NETWT IS INITIAL.
MESSAGE TEXT-010 TYPE 'E'.
ELSE.
IF NETWT >= GROSSWT.
MESSAGE TEXT-011 TYPE 'E'.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD I_DATA~MASPAT_VAL.
IF MASTER_PATTERN IS INITIAL.
MESSAGE TEXT-014 TYPE 'E'.
ENDIF.
SELECT SINGLE * FROM MARA INTO I_DATA~WA_MARA WHERE MATNR = MASTER_PATTERN.
IF SY-SUBRC <> 0.
MESSAGE TEXT-001 TYPE 'E'.
ELSE.
IF I_DATA~WA_MARA-MTART NE 'FHMI'.
MESSAGE TEXT-012 TYPE 'E'.
ENDIF.
SELECT SINGLE * FROM MARC INTO I_DATA~WA_MARC WHERE MATNR = MASTER_PATTERN AND
WERKS = C_WERKS.
IF SY-SUBRC <> 0.
MESSAGE TEXT-003 TYPE 'E'.
ELSE.
IF I_DATA~WA_MARC-FEVOR NE 'MLD'.
MESSAGE TEXT-013 TYPE 'E'.
ENDIF.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD I_DATA~PATSLNO_VAL.
IF PATTERNSLNO IS INITIAL.
MESSAGE TEXT-016 TYPE 'E'.
ENDIF.
SELECT SINGLE * FROM ZACT02_BOXKOD INTO I_DATA~WA_ZACT02_BOXKOD WHERE MASTER_PATTERN = MASTER_PATTERN
AND PATTERNSLNO = PATTERNSLNO.
IF SY-SUBRC EQ 0.
MESSAGE TEXT-015 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~MAX_REF.
SELECT SINGLE MAX( VERSNO ) FROM ZACT02_BOXKOD INTO VERSNO.
VERSNO = VERSNO + 1.
ENDMETHOD.
METHOD I_DATA~NOOFBOX_VAL.
IF BMSCH IS INITIAL.
LOOP AT SCREEN.
IF SCREEN-GROUP2 = 'BOT' AND SCREEN-NAME <> 'ZACT02_BOXKOD-PRD_ACT' AND SCREEN-NAME <> 'ZACT02_BOXKOD-SHOTS'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
MESSAGE TEXT-017 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~TOTTIME_VAL.
IF VGW01 IS INITIAL.
MESSAGE TEXT-018 TYPE 'E'.
ENDIF.
IF VGW01 > 480.
MESSAGE TEXT-019 TYPE 'E'.
ENDIF.
ENDMETHOD.
METHOD I_DATA~TOTRUNWT.
CLEAR W_SUM_RUNWT.
LOOP AT IT_C_DISPLAY INTO I_DATA~WA_DISPLAY.
W_SUM_RUNWT = W_SUM_RUNWT + I_DATA~WA_DISPLAY-NETWT * I_DATA~WA_DISPLAY-CAVITY.
ENDLOOP.
ENDMETHOD.
METHOD I_DATA~TOTCOMP_WT.
CLEAR W_SUM_COMPWT.
LOOP AT IT_C_DISPLAY INTO I_DATA~WA_DISPLAY.
W_SUM_COMPWT = W_SUM_COMPWT + I_DATA~WA_DISPLAY-GROSSWT * I_DATA~WA_DISPLAY-CAVITY.
ENDLOOP.
ENDMETHOD.
METHOD I_DATA~CHECK_OK.
IF SAVE_OK = 'CHECK'.
LOOP AT SCREEN.
IF SCREEN-GROUP2 = 'BOT'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF SCREEN-GROUP2 = 'BOT'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMETHOD.
METHOD I_DATA~SCREEN_DISPLAY.
IF MASTER_PATTERN IS INITIAL
OR PATTERNSLNO IS INITIAL.
LOOP AT SCREEN.
IF SCREEN-GROUP2 = 'BOT'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
IF SAVE_OK NE 'CHECK'.
LOOP AT SCREEN.
IF SCREEN-GROUP2 = 'BOT'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD I_DATA~DUP_CHECK. " IMPORTING IT_C_DISPLAY
DATA: W_PARTCODE LIKE I_DATA~WA_DISPLAY-PARTCODE.
I_DATA~IT_SORT_DISPLAY = IT_C_DISPLAY.
SORT I_DATA~IT_SORT_DISPLAY BY PARTCODE.
CLEAR W_PARTCODE.
LOOP AT I_DATA~IT_SORT_DISPLAY INTO I_DATA~WA_DISPLAY.
IF W_PARTCODE = I_DATA~WA_DISPLAY-PARTCODE.
MESSAGE TEXT-027 TYPE 'E'.
ENDIF.
W_PARTCODE = I_DATA~WA_DISPLAY-PARTCODE.
ENDLOOP.
ENDMETHOD.
METHOD I_DATA~BOX_YLD.
W_YIELD = ( W_SUM_COMPWT / W_TOT_WT ) * 100.
ENDMETHOD.
ENDCLASS.
inherited class for edit mode
CLASS CL_CONTROL_EDIT DEFINITION INHERITING FROM CL_CONTROL_EVENTS .
PUBLIC SECTION.
METHODS GET_DATA IMPORTING MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
EXPORTING VERSNO TYPE ZACT02_BOXKOD-VERSNO
CHANGING ZACT02_BOXKOD TYPE ZACT02_BOXKOD
IT_C_DISPLAY LIKE I_DATA~IT_C_DISPLAY
IT_DEL_DISPLAY LIKE I_DATA~IT_C_DISPLAY
TABC TYPE CX_TABLEVIEW.
METHODS PATSLNO_VAL_CHG IMPORTING PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN .
ENDCLASS.
CLASS CL_CONTROL_EDIT IMPLEMENTATION.
METHOD GET_DATA.
IF MASTER_PATTERN IS NOT INITIAL AND PATTERNSLNO IS NOT INITIAL.
IF IT_C_DISPLAY IS INITIAL.
IF IT_DEL_DISPLAY IS INITIAL.
SELECT SINGLE MAX( VERSNO ) FROM ZACT02_BOXKOD INTO VERSNO WHERE
MASTER_PATTERN = MASTER_PATTERN AND
PATTERNSLNO = PATTERNSLNO.
SELECT SINGLE * FROM ZACT02_BOXKOD INTO ZACT02_BOXKOD WHERE
MASTER_PATTERN = MASTER_PATTERN AND
PATTERNSLNO = PATTERNSLNO AND
VERSNO = VERSNO..
SELECT PARTCODE MAINB CAVITY GROSSWT NETWT FROM ZACT02_BOXKOD INTO
CORRESPONDING FIELDS OF TABLE IT_C_DISPLAY WHERE
MASTER_PATTERN = MASTER_PATTERN AND
PATTERNSLNO = PATTERNSLNO AND
VERSNO = VERSNO.
IT_DEL_DISPLAY[] = IT_C_DISPLAY[].
DESCRIBE TABLE IT_C_DISPLAY.
TABC-LINES = SY-TFILL.
ENDIF.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD PATSLNO_VAL_CHG.
SELECT SINGLE * FROM ZACT02_BOXKOD INTO I_DATA~WA_ZACT02_BOXKOD WHERE MASTER_PATTERN = MASTER_PATTERN
AND PATTERNSLNO = PATTERNSLNO.
IF PATTERNSLNO IS INITIAL.
MESSAGE TEXT-016 TYPE 'E'.
ENDIF.
IF SY-SUBRC <> 0.
MESSAGE TEXT-022 TYPE 'E'.
ENDIF.
ENDMETHOD.
ENDCLASS.
inheriting for display
CLASS CL_CONTROL_DISPLAY DEFINITION INHERITING FROM CL_CONTROL_EDIT .
PUBLIC SECTION.
METHODS GET_DISPLAY_DATA IMPORTING MASTER_PATTERN TYPE ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO TYPE ZACT02_BOXKOD-PATTERNSLNO
VERSNO TYPE ZACT02_BOXKOD-VERSNO
CHANGING IT_C_DISPLAY LIKE I_DATA~IT_C_DISPLAY
ZACT02_BOXKOD TYPE ZACT02_BOXKOD
TABC TYPE CX_TABLEVIEW.
ENDCLASS.
CLASS CL_CONTROL_DISPLAY IMPLEMENTATION.
METHOD GET_DISPLAY_DATA.
SELECT SINGLE * FROM ZACT02_BOXKOD INTO ZACT02_BOXKOD WHERE
MASTER_PATTERN = MASTER_PATTERN AND
PATTERNSLNO = PATTERNSLNO AND
VERSNO = VERSNO..
IF SY-SUBRC <> 0.
MESSAGE TEXT-026 TYPE 'E'.
ENDIF.
SELECT PARTCODE MAINB CAVITY GROSSWT NETWT FROM ZACT02_BOXKOD INTO
CORRESPONDING FIELDS OF TABLE IT_C_DISPLAY WHERE
MASTER_PATTERN = MASTER_PATTERN AND
PATTERNSLNO = PATTERNSLNO AND
VERSNO = VERSNO.
DESCRIBE TABLE IT_C_DISPLAY.
TABC-LINES = SY-TFILL.
ENDMETHOD.
ENDCLASS.
DATA: O_CONTROL_EVENTS TYPE REF TO CL_CONTROL_EVENTS.
DATA: O_CONTROL_EVENTS_EDIT TYPE REF TO CL_CONTROL_EDIT.
DATA: O_CONTROL_EVENTS_DISPLAY TYPE REF TO CL_CONTROL_DISPLAY.
SELECTION SCREEN
END OF SELECTION SCREEN
VARIABLE DECLARATION BEGIN WITH W_
DATA: OK_CODE TYPE SY-UCOMM,
SAVE_OK TYPE SY-UCOMM.
DATA: W_TOT_WT LIKE ZACS018_STR-NETWT,
W_SUM_COMPWT LIKE ZACS018_STR-NETWT,
W_SUM_RUNWT LIKE ZACS018_STR-NETWT,
W_YIELD(5) TYPE P DECIMALS 2.
DATA: W_TIMLO TYPE SY-TIMLO,
W_MODE TYPE SY-UCOMM.
DATA: W_SCREEN_NO TYPE SY-DYNNR.
END OF VARIABLE DECLARATION
WORK AREAS DECLARATION BEGIN WITH WA_
DATA: WA_DISPLAY TYPE ZACS018_STR.
END OF WORK AREAS DECLARATION
INTERNAL TABLES BEGIN WITH IT_
DATA: IT_DISPLAY TYPE ZACS018_STR OCCURS 0.
DATA: IT_DISPLAY_PRD TYPE ZACS018_STR OCCURS 0.
DATA: IT_DEL_DISPLAY TYPE ZACS018_STR OCCURS 0.
DATA: IT_ZACT02_BOXKOD TYPE ZACT02_BOXKOD OCCURS 0 WITH HEADER LINE.
DATA: IT_ZACT02_BOXKOD_DEL TYPE ZACT02_BOXKOD OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF IT_F4MASTERPAT OCCURS 0,
MASTER_PATTERN LIKE ZACT02_BOXKOD-MASTER_PATTERN,
END OF IT_F4MASTERPAT.
DATA: BEGIN OF IT_F4PATSLNO OCCURS 0,
MASTER_PATTERN LIKE ZACT02_BOXKOD-MASTER_PATTERN,
PATTERNSLNO LIKE ZACT02_BOXKOD-PATTERNSLNO,
VERSNO LIKE ZACT02_BOXKOD-VERSNO,
END OF IT_F4PATSLNO.
DATA: IT_EXCLUDE TYPE TABLE OF SY-UCOMM..
DATA : IT_DYNPRO LIKE DYNPREAD OCCURS 0 WITH HEADER LINE.
END OF INTERNAL TABLES DECLARATIONS
LOAD-OF-PROGRAM.
CREATE OBJECT O_CONTROL_EVENTS.
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
W_MODE = SAVE_OK.
CASE SAVE_OK.
WHEN 'CREATE'.
CALL SCREEN 101.
WHEN 'CHANGE'.
CREATE OBJECT O_CONTROL_EVENTS_EDIT.
CALL SCREEN 101.
WHEN 'DISPLAY'.
APPEND 'SAVE' TO IT_EXCLUDE.
APPEND 'CHECK' TO IT_EXCLUDE.
APPEND 'ADD' TO IT_EXCLUDE.
CREATE OBJECT O_CONTROL_EVENTS_DISPLAY.
CALL SCREEN 101.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0102 OUTPUT
text
MODULE STATUS_0102 OUTPUT.
CALL METHOD CL_TABLE_CONTROL=>M3 EXPORTING SAVE_OK = SAVE_OK CHANGING C_TABC = TABC.
CALL METHOD O_CONTROL_EVENTS->I_DATA~CHECK_OK EXPORTING SAVE_OK = SAVE_OK.
CALL METHOD O_CONTROL_EVENTS->I_DATA~SCREEN_DISPLAY EXPORTING MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
SAVE_OK = SAVE_OK.
CALL METHOD CL_TABLE_CONTROL=>M4 EXPORTING MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
SAVE_OK = SAVE_OK
CHANGING C_TABC = TABC.
DESCRIBE TABLE IT_DISPLAY.
IF TABC-LINES <= 1.
IF SY-TFILL = 0.
TABC-LINES = 1.
ENDIF.
ENDIF.
IF SAVE_OK NE 'CHECK'.
IF ZACT02_BOXKOD-TOOL_ACT <> 'X'.
CLEAR ZACT02_BOXKOD-PRD_ACT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZACT02_BOXKOD-PRD_ACT'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZACT02_BOXKOD-PRD_ACT'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
CALL METHOD O_CONTROL_EVENTS->I_DATA~TOTRUNWT EXPORTING IT_C_DISPLAY = IT_DISPLAY
IMPORTING W_SUM_RUNWT = W_SUM_RUNWT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~TOTCOMP_WT EXPORTING IT_C_DISPLAY = IT_DISPLAY
IMPORTING W_SUM_COMPWT = W_SUM_COMPWT.
CLEAR W_TOT_WT.
W_TOT_WT = W_SUM_RUNWT + W_SUM_COMPWT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~BOX_YLD EXPORTING W_SUM_COMPWT = W_SUM_COMPWT
W_TOT_WT = W_TOT_WT
IMPORTING W_YIELD = W_YIELD.
IF W_MODE <> 'CREATE'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZACT02_BOXKOD-SHOTS'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF W_MODE = 'DISPLAY'.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ADD' OR SCREEN-NAME = 'ICON_DELETE'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE. " STATUS_0102 OUTPUT
*& Module STATUS_0101 OUTPUT
text
MODULE STATUS_0101 OUTPUT.
SET PF-STATUS 'STANDARD' EXCLUDING 'SAVE'.
IF W_MODE = 'CREATE'.
SET TITLEBAR 'STANDARD'.
ELSEIF W_MODE = 'DISPLAY'.
SET TITLEBAR 'STD_DIS'.
ELSE.
SET TITLEBAR 'STD_EDIT'.
ENDIF.
IF SAVE_OK = 'CHECK'.
DESCRIBE TABLE IT_DISPLAY.
IF SY-TFILL > 0.
SET PF-STATUS 'STANDARD'.
ENDIF.
ENDIF.
IF W_MODE = 'DISPLAY'.
SET PF-STATUS 'STANDARD' EXCLUDING IT_EXCLUDE.
ENDIF.
IF ZACT02_BOXKOD-MASTER_PATTERN IS NOT INITIAL AND
ZACT02_BOXKOD-PATTERNSLNO IS NOT INITIAL.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'TOP'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
IF W_MODE = 'DISPLAY'.
IF ZACT02_BOXKOD-VERSNO IS INITIAL.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZACT02_BOXKOD-VERSNO'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZACT02_BOXKOD-VERSNO'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDMODULE. " STATUS_0101 OUTPUT
*& Module USER_COMMAND_0102 INPUT
text
MODULE USER_COMMAND_0102 INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK.
WHEN 'ADD'.
DESCRIBE TABLE IT_DISPLAY.
IF SY-TFILL >= TABC-LINES.
IF TABC-LINES < 16.
TABC-LINES = SY-TFILL + 1.
ENDIF.
ENDIF.
WHEN 'DEL'.
LOOP AT IT_DISPLAY INTO WA_DISPLAY WHERE MARK = 'X'.
DELETE IT_DISPLAY INDEX SY-TABIX.
ENDLOOP.
DESCRIBE TABLE IT_DISPLAY.
IF SY-TFILL >= 1.
TABC-LINES = SY-TFILL.
ELSE.
TABC-LINES = 1.
ENDIF.
WHEN 'CHECK'.
CALL METHOD O_CONTROL_EVENTS->I_DATA~DUP_CHECK EXPORTING IT_C_DISPLAY = IT_DISPLAY.
WHEN 'SAVE'.
W_TIMLO = SY-TIMLO.
IF W_MODE = 'CREATE'.
PERFORM CREATE_SAVE.
ENDIF.
IF W_MODE = 'CHANGE'.
PERFORM EDIT_SAVE.
ENDIF.
ENDCASE.
IF W_MODE = 'DISPLAY'.
SAVE_OK = 'CHECK'.
ENDIF.
ENDMODULE. " USER_COMMAND_0102 INPUT
*& Module MOD_TABLE INPUT
text
MODULE MOD_TABLE INPUT.
CALL METHOD CL_TABLE_CONTROL=>M2 EXPORTING ZACS018_STR_C = ZACS018_STR CHANGING IT_C_DISPLAY = IT_DISPLAY.
ENDMODULE. " MOD_TABLE INPUT
*& Module ASSIGN OUTPUT
text
MODULE ASSIGN OUTPUT.
CALL METHOD CL_TABLE_CONTROL=>M1 EXPORTING WA_C_DISPLAY = WA_DISPLAY IMPORTING ZACS018_STR_C = ZACS018_STR.
ENDMODULE. " ASSIGN OUTPUT
*& Module CHK_PARTCODE INPUT
text
MODULE CHK_PARTCODE INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~PARTNO_VAL EXPORTING PARTCODE = ZACS018_STR-PARTCODE.
ENDMODULE. " CHK_PARTCODE INPUT
*& Module CHK_CAVITY INPUT
text
MODULE CHK_CAVITY INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~CAVITY_VAL EXPORTING CAVITY = ZACS018_STR-CAVITY.
ENDMODULE. " CHK_CAVITY INPUT
*& Module CHK_MAINB INPUT
text
MODULE CHK_MAINB INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~MAINBI_VAL EXPORTING MAINB = ZACS018_STR-MAINB.
ENDMODULE. " CHK_MAINB INPUT
*& Module GET_COMP_WT INPUT
text
MODULE GET_COMP_WT INPUT.
IF W_MODE <> 'DISPLAY'.
CALL METHOD O_CONTROL_EVENTS->I_DATA~GET_COMP_WT EXPORTING PARTCODE = ZACS018_STR-PARTCODE
IMPORTING GROSSWT = ZACS018_STR-GROSSWT.
ENDIF.
ENDMODULE. " GET_COMP_WT INPUT
*& Module CHK_NETWT INPUT
text
MODULE CHK_NETWT INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~NETWT_VAL EXPORTING NETWT = ZACS018_STR-NETWT
GROSSWT = ZACS018_STR-GROSSWT.
ENDMODULE. " CHK_NETWT INPUT
*& Module CHK_MPAT INPUT
text
MODULE CHK_MPAT INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~MASPAT_VAL EXPORTING MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN.
ENDMODULE. " CHK_MPAT INPUT
*& Module CHK_SLNO INPUT
text
MODULE CHK_SLNO INPUT.
IF W_MODE = 'CREATE'.
CALL METHOD O_CONTROL_EVENTS->I_DATA~PATSLNO_VAL EXPORTING PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN .
ELSEIF W_MODE = 'CHANGE' .
CALL METHOD O_CONTROL_EVENTS_EDIT->PATSLNO_VAL_CHG EXPORTING PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN .
CALL METHOD O_CONTROL_EVENTS_EDIT->GET_DATA EXPORTING MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
IMPORTING VERSNO = ZACT02_BOXKOD-VERSNO
CHANGING ZACT02_BOXKOD = ZACT02_BOXKOD
IT_C_DISPLAY = IT_DISPLAY
IT_DEL_DISPLAY = IT_DEL_DISPLAY
TABC = TABC.
ELSE.
CALL METHOD O_CONTROL_EVENTS_DISPLAY->PATSLNO_VAL_CHG EXPORTING PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN .
ENDIF.
ENDMODULE. " CHK_SLNO INPUT
*& Module MAX_VER INPUT
text
MODULE MAX_VER INPUT.
IF W_MODE = 'CREATE'.
CALL METHOD O_CONTROL_EVENTS->I_DATA~MAX_REF IMPORTING VERSNO = ZACT02_BOXKOD-VERSNO.
ENDIF.
IF W_MODE = 'DISPLAY'.
IF ZACT02_BOXKOD-VERSNO IS INITIAL.
MESSAGE TEXT-023 TYPE 'E'.
ENDIF.
IF ZACT02_BOXKOD-MASTER_PATTERN IS NOT INITIAL AND
ZACT02_BOXKOD-PATTERNSLNO IS NOT INITIAL AND
ZACT02_BOXKOD-VERSNO IS NOT INITIAL.
CALL METHOD O_CONTROL_EVENTS_DISPLAY->GET_DISPLAY_DATA EXPORTING MASTER_PATTERN = ZACT02_BOXKOD-MASTER_PATTERN
PATTERNSLNO = ZACT02_BOXKOD-PATTERNSLNO
VERSNO = ZACT02_BOXKOD-VERSNO
CHANGING ZACT02_BOXKOD = ZACT02_BOXKOD
IT_C_DISPLAY = IT_DISPLAY
TABC = TABC.
ENDIF.
ENDIF.
ENDMODULE. " MAX_VER INPUT
*& Module CHK_NOBOXES INPUT
text
MODULE CHK_NOBOXES INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~NOOFBOX_VAL EXPORTING BMSCH = ZACT02_BOXKOD-BMSCH.
ENDMODULE. " CHK_NOBOXES INPUT
*& Module CHK_TOTTIME INPUT
text
MODULE CHK_TOTTIME INPUT.
CALL METHOD O_CONTROL_EVENTS->I_DATA~TOTTIME_VAL EXPORTING VGW01 = ZACT02_BOXKOD-VGW01.
ENDMODULE. " CHK_TOTTIME INPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'INITIAL'.
SET TITLEBAR 'STANDARD_MAIN'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module EXIT_PROGRAM INPUT
text
MODULE EXIT_PROGRAM INPUT.
LEAVE TO TRANSACTION 'ZAC16'.
ENDMODULE. " EXIT_PROGRAM INPUT -
Dear friends,
I have a problem in handling tabstrips in module pool programming.
the problem is when i go to next screen it gets initiated to the tab number which i have declared in the data part.
but the data in the screen remains intact.
after pressing the option in the status it gets initiated and then i have to click the particular tab to go the tab and to see the changes get affected.
how to solve this problem.
plz do the needful.
regards
samarendraHi,
You just need to create the screen........
PAI
*& Include MZDS_CRTSCREENI01
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'SPFLI' OR 'SBOOK'.
TAB1-ACTIVETAB = OK_CODE.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 100.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
PBO
*& Include MZDS_CRTSCREENO01
*& Module STATUS_0100 OUTPUT
* text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'BASE'.
SET TITLEBAR 'TITLE'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module CLEAR_OKCODE OUTPUT
* text
MODULE CLEAR_OKCODE OUTPUT.
CLEAR OK_CODE.
ENDMODULE. " CLEAR_OKCODE OUTPUT
MODULE DISPLAY_DATA OUTPUT.
CASE 'X' .
WHEN RBT-SPFLI.
SELECT CITYFROM AIRPFROM CITYTO AIRPTO FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE IT_SPFLI
WHERE CARRID = SPFLI-CARRID
AND CONNID = SPFLI-CONNID.
FLDATE = ' '.
BOOKNO = ' '.
CUSTNO = ' '.
LOOP AT IT_SPFLI.
DEP_CITY = IT_SPFLI-CITYFROM.
DEP_AIR = IT_SPFLI-AIRPFROM.
DES_CITY = IT_SPFLI-CITYTO.
DES_AIR = IT_SPFLI-AIRPTO.
ENDLOOP.
WHEN RBT-SBOOK.
SELECT SINGLE FLDATE BOOKID CUSTOMID FROM SBOOK
INTO CORRESPONDING FIELDS OF IT_SBOOK
WHERE CARRID = SPFLI-CARRID
AND CONNID = SPFLI-CONNID.
FLDATE = IT_SBOOK-FLDATE.
BOOKNO = IT_SBOOK-BOOKID.
CUSTNO = IT_SBOOK-CUSTOMID.
DEP_CITY = ' '.
DEP_AIR = ' '.
DES_CITY = ' '.
DES_AIR = ' '.
ENDCASE.
ENDMODULE.
*& Module CALL_DYNNR OUTPUT
* text
MODULE CALL_DYNNR OUTPUT.
CASE TAB1-ACTIVETAB.
WHEN 'SPFLI'.
DYNNR = 102.
WHEN 'SBOOK'.
DYNNR = 103.
WHEN OTHERS.
TAB1-ACTIVETAB = 'SPFLI'.
DYNNR = 102.
ENDCASE.
ENDMODULE. " CALL_DYNNR OUTPUT
*& Module DISPLAY_SFLIGHT OUTPUT
* text
MODULE DISPLAY_SFLIGHT OUTPUT.
SELECT CITYFROM AIRPFROM CITYTO AIRPTO FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE IT_SPFLI
WHERE CARRID = SPFLI-CARRID
AND CONNID = SPFLI-CONNID.
CITY_FROM = IT_SPFLI-CITYFROM.
AIRP_FROM = IT_SPFLI-AIRPFROM.
CITY_TO = IT_SPFLI-CITYTO.
AIRP_TO = IT_SPFLI-AIRPTO.
ENDMODULE. " DISPLAY_SFLIGHT OUTPUT
*& Module DISPLAY_SBOOK OUTPUT
* text
MODULE DISPLAY_SBOOK OUTPUT.
SELECT SINGLE FLDATE BOOKID CUSTOMID FROM SBOOK
INTO CORRESPONDING FIELDS OF IT_SBOOK
WHERE CARRID = SPFLI-CARRID
AND CONNID = SPFLI-CONNID.
FL_DATE = IT_SBOOK-FLDATE.
BOOKID = IT_SBOOK-BOOKID.
CUSTOMID = IT_SBOOK-CUSTOMID.
ENDMODULE. " DISPLAY_SBOOK OUTPUT
TOP INCLUDE
*& Include MZDS_CRTSCREENTOP Module Pool SAPMZDS_CRTSCREEN
PROGRAM SAPMZDS_CRTSCREEN.
TABLES: SPFLI,SBOOK.
DATA: OK_CODE TYPE SYUCOMM.
CONTROLS TAB1 TYPE TABSTRIP.
DATA: BEGIN OF IT_SPFLI OCCURS 0,
CITYFROM TYPE SPFLI-CITYFROM,
AIRPFROM TYPE SPFLI-AIRPFROM,
CITYTO TYPE SPFLI-CITYTO,
AIRPTO TYPE SPFLI-AIRPTO,
END OF IT_SPFLI.
DATA: IT_SBOOK TYPE SBOOK.
DATA: DYNNR TYPE SY-DYNNR.
DATA: DEP_CITY(20) TYPE C,
DEP_AIR(20) TYPE C,
DES_CITY(20) TYPE C,
DES_AIR(20) TYPE C.
DATA: FLDATE(20) TYPE C,
BOOKNO(20) TYPE C,
CUSTNO(20) TYPE C.
DATA:CITY_FROM(20) TYPE C,
AIRP_FROM(20) TYPE C,
CITY_TO(20) TYPE C,
AIRP_TO(20) TYPE C.
DATA: FL_DATE(20) TYPE C,
BOOKID(20) TYPE C,
CUSTOMID(20) TYPE C.
DATA: BEGIN OF RBT,
SPFLI VALUE 'X',
SBOOK,
END OF RBT.
HTH
Regards,
Dhruv Shah -
Module Pool Programming in ECC 5.0
Hi Experts,
Can any one explain the unique features of Module pool programming in ECC 5.0.
Even if you find any documentation please pass it on.
Regards,
ShankarThe screen painter is basically the same in 4.7 and ECC6.
The difference you see might be because you are using the alphanumerical screen painter in 4.7 where the default in ECC is the graphical screen painter. Both are available in 4.7 and ECC.
To switch back to the alphanumerical in ECC6, just do:
- SE80
- menu Utilities
- Settings
- tabstrip Screen Painter
- remove the flag for graphical layout editor
This will start the alphanumerical instead of the graphical one
However the graphical one is much easier to use so you might want to look into using that one instead of the (old) alphanumerical one.
Hope that helps,
Michael -
How to set user command in module pool program
hello expert,
like in report: PARAMETERS: RB_SING RADIOBUTTON GROUP RAD3 DEFAULT 'X' USER-COMMAND C1.
in module pool program, hw to set user-command in screen.
srinivasPBO.
Call subscreen <SUBSCREEN NAME> Including sy-repid(PROGRAM NAME) G_DYNNR(SCREEN NUMBER'.
PAI
module user_command.
Call subscreen <subscreen name>
Module user_command.
case sy-ucomm.
when 'BUT1'.
g_dynnr = 200.
when 'BUT2'.
g_dynnr = 300.
Endcase.
end module
REPORT demo_dynpro_tabstrip_server.
CONTROLS mytabstrip TYPE TABSTRIP.
DATA: ok_code TYPE sy-ucomm,
save_ok TYPE sy-ucomm.
DATA number TYPE sy-dynnr.
mytabstrip-activetab = 'PUSH2'.
number = '0120'.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE user_command INPUT.
save_ok = ok_code.
CLEAR ok_code.
IF save_ok = 'OK'.
MESSAGE i888(sabapdocu) WITH 'MYTABSTRIP-ACTIVETAB ='
mytabstrip-activetab.
ELSE.
mytabstrip-activetab = save_ok.
CASE save_ok.
WHEN 'PUSH1'.
number = '0110'.
WHEN 'PUSH2'.
number = '0120'.
WHEN 'PUSH3'.
number = '0130'.
ENDCASE.
ENDIF.
ENDMODULE.
flow logic of the screen 100
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN SUB INCLUDING SY-REPID NUMBER.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
CALL SUBSCREEN SUB.
MODULE USER_COMMAND.
flow logic of the screen 110
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
flow logic of the screen 120
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
flow logic of the screen 130
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
REGARDS
VASU -
How to write a module pool (M) program for the DEMO_DYNPRO_TABSTRIP_server
Hi,
How does someone write a module pool program (type m ) like the one which is given as an example for tabstrip control (paging through the app.server which is a report program). Please check the code given in the abap tutorial by sap below.
REPORT DEMO_DYNPRO_TABSTRIP_server.
CONTROLS MYTABSTRIP TYPE TABSTRIP.
DATA: OK_CODE TYPE SY-UCOMM,
SAVE_OK TYPE SY-UCOMM.
DATA NUMBER TYPE SY-DYNNR.
MYTABSTRIP-ACTIVETAB = 'PUSH2'.
NUMBER = '0120'.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE USER_COMMAND INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'OK'.
MESSAGE I888(SABAPDOCU) WITH 'MYTABSTRIP-ACTIVETAB ='
MYTABSTRIP-ACTIVETAB.
ELSE.
MYTABSTRIP-ACTIVETAB = SAVE_OK.
CASE SAVE_OK.
WHEN 'PUSH1'.
NUMBER = '0110'.
WHEN 'PUSH2'.
NUMBER = '0120'.
WHEN 'PUSH3'.
NUMBER = '0130'.
ENDCASE.
ENDIF.
ENDMODULE.
I am finding the problem with the below statements .
MYTABSTRIP-ACTIVETAB = 'PUSH2'.
NUMBER = '0120'.
CALL SCREEN 100.
how do I write them in a module and how I can ensure that the functionality is not changed?
Thanks in advance,
Ajith cHi
All Tabstribs use the same subarea SUB (see the dynpro 100), in PBO it needs to indicate the program and subscreen number have to be loaded in that subarea.
In PBO of screen 100 you can see the line:
CALL SUBSCREEN SUB INCLUDING SY-REPID NUMBER.
The variable NUMBER is managed in the USER_COMMAND:
save_ok = ok_code.
CLEAR ok_code.
IF save_ok = 'OK'.
MESSAGE i888(sabapdocu) WITH 'MYTABSTRIP-ACTIVETAB ='
mytabstrip-activetab.
ELSE.
mytabstrip-activetab = save_ok.
CASE save_ok.
WHEN 'PUSH1'.
number = '0110'.
WHEN 'PUSH2'.
number = '0120'.
WHEN 'PUSH3'.
number = '0130'.
ENDCASE.
ENDIF.
But this module is triggered as soon as you press a button on screen 100 (you have to considere the label of tabstrip is a pushbutton),
so it needs to initialize the variable NUMBER for the first time screen 100 is called, that mean it needs to indicate which is the first tab has to be shown at the beginning, so you have the code:
mytabstrip-activetab = 'PUSH2'.
number = '0120'.
CALL SCREEN 100.
The same code can be included in the PBO in the following way:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
MODULE INIT_TABSTRIP. "<--- New Module
CALL SUBSCREEN SUB INCLUDING SY-REPID NUMBER.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
CALL SUBSCREEN SUB.
MODULE USER_COMMAND.
MODULE INIT_TABSTRIP.
IF NUMBER IS INITIAL.
mytabstrip-activetab = 'PUSH2'.
number = '0120'.
ENDIF.
ENDMODULE.
The line:
mytabstrip-activetab = 'PUSH2'.
is to indicate which tabstrip has to be placed in foreground (remember every tabstrip is a pushbutton, so every tabstrip has an own ok_code)
Max -
Hiiiiiiiii
friends i wanna discuss that
i had created a module pool with tabstrip and calling 7 subscreens in that
i had save button for that
lets suppose 0001 is main screen
0002,0003,00034,0005,0006,0007,0008,0009 are subscreens that r called in module pool main screen 0001.
Now i want that for updating that module pool i shuld run a different transaction
so friends i had to make a different screen in which update code is to be written and rest same
means subscreens should also be called up in different main screen
or their is some other way out else creating screen
reply
me waiting
With Best Regards
RubyHi
go to the following link:
http://sapmaterial.com/dialog_programming.html
Reward points if helpful.
Srikanta gope -
Hi all plz any one send me the doc for Module pool programmiing to learn on my own
thanks & regards
vamsinHi,
This is the material find the attachment.
hi,
Pool table
A database table defined in the ABAP Dictionary whose database instance is assigned to more than one table defined in the ABAP Dictionary. Multiple pool tables are assigned to a table pool in the database. The key fields of a pool table have to be character-type fields. The table pool's primary key consists of two fields: TABNAME for the name of a pool table, and VARKEY for the interdependent contents of the key fields in the corresponding pool table. The non-key fields of the pool table are stored in compressed format in their own column, called VARDATA, of the table pool. The only way to access pool tables is by using Open SQL. Joins are not allowed.
Table Pool
Database table in the database that contains the data of several pool tables.
Cluster Table
Database table defined in the ABAP Dictionary, whose version on the database is not only assigned to one table defined in the ABAP Dictionary. Several cluster tables are assigned to a table cluster in the database. The intersection of the key fields of the cluster tables forms the primary key of the table cluster. The other columns of the cluster tables are stored in compressed form in a single column VARDATA of the table cluster. You can access cluster tables only via Open SQL, and only without using joins.
Table Cluster
Database table in the database that contains the data of several cluster tables.
Note: Never mix up with a database table that has the necessary structure for storing data clusters in database tables and in the shared memory. Those are called INDX-type, with reference to the database table INDX supplied by SAP. Data clusters are groupings of data objects for transient and persistent storage in a selectable storage medium. A data cluster can be processed using the statements IMPORT, EXPORT, and DELETE FROM
P.Naganjana ReddyDAY-4 CONTENTS
SCREEN PAINTER
��
Introduction to Dialog Programming
��
Transactions
Screens (dynpros)
ABAP/4 module pool
Transferring Field Data
Field Attributes
Error Dialogs
Data Consistency
Dynpro
Layout
��
Exercise
TABLE CONTROL
��
Functional scope
��
Programming
��
Attributes
��
EXERCISE
TABSTRIP CONTROLS
��
Defining the Tabstrip Control Area and Tab Titles
��
Assigning a Subscreen Area to a Tab Title
��
Paging in the SAPgui
��
Programming the Flow Logic
��
EXERCISE
P.Naganjana Reddy
SCREEN WITH FIELDS
Introduction to Dialog Programming
Transactions
A transaction is a program that conducts a dialog with the user. In a typical dialog, the
system displays a screen on which the user can enter or request information. As a reaction on
the the user input or request, the program executes the appropriate actions: it branches to the
next screen, displays an output, or changes the database.
Example
A travel agent wants to book a flight. The agent enters the corresponding data on the
screen. The system either confirms the desired request, that is, the agent can book the flight
and the customer travels on the desired day on the reserved seat to the chosen destination,
or the system displays the information that the flight is already booked up.
To fulfil such requirements, a dialog program must offer:
_a user-friendly user interface
_format and consistency checks for the data entered by the user
_easy correction of input errors
_access to data by storing it in the database.
ABAP/4 offers a variety of tools and language elements to meet the requirements stated
above in the dialog programs.
Structure of a Dialog Program
A dialog program consists of the following basic components:
P.Naganjana Reddy
Screens (dynpros)
Each dialog in an SAP system is controlled by dynpros. A dynpro (Dynamic PROgram) consists of a screen and its flow logic and controls exactly one dialog step. The flow logic determines which processing takes place before displaying the screen (PBO-Process Before Output) and after receiving the entries the user made on the screen (PAI-Process After Input).
The screen layout fixed in the Screen Painter determines the positions of input/output
fields, text fields, and graphical elements such as radio buttons and checkboxes. In addition, the Menu Painter allows to store menus, icons, pushbuttons, and function keys in one or more GUI statuses. Dynpros and GUI statuses refer to the ABAP/4 program that control the sequence of the dynpros and GUI statuses at runtime.
ABAP/4 module pool
Each dynpro refers to exactly one ABAP/4 dialog program. Such a dialog program is also called a module pool, since it consists of interactive modules. The flow logic of a dynpro contains calls of modules from the corresponding module pool. Interactive modules called at the PBO event are used to prepare the screen template in accordance to the context, for example by setting field contents or by suppressing fields from the display that are not needed. Interactive modules called at the PAI event are used to check the user input and to trigger appropriate dialog steps, such as the update task.
All dynpros to be called from within one transaction refer to a common module pool. The dynpros of a module pool are numbered. By default, the system stores for each dynpro the dynpro to be displayed next. This dynpro sequence or chain can be linear as well as cyclic. From within a dynpro chain, you can even call another dynpro chain and, after processing it, return to the original chain.
Transferring Field Data
How do I display fields known in an ABAP/4 module on the screen? How do I transfer
user entries on the screen to the module? In contrast to report programming, you cannot write field data to the screen using the WRITE statement. The system instead transfers data by comparing screen field names with ABAP/4 variable names. If both names are the same, it transfers screen field values to ABAP/4 program fields and vice versa. This happens immediately before and immediately after displaying the screen.
Field Attributes
For all screen fields of a dynpro, field attributes are defined in the Screen Painter. If a
field name in the screen corresponds to the name of an ABAP/4 Dictionary field, the system automatically establishes a reference between these two fields. Thus, a large number of field attributes in the dynpro is automatically copied from the ABAP/4 Dictionary. The field attributes together with data element and domain of the assigned Dictionary field form the basis for the standard functions the dynpro executes in a dialog (automatic format check for screen fields, automatic value range check, online help, and so on).
Error Dialogs
Another task of the dynpro processor is to conduct error dialogs. Checking the input data is carried out either automatically using check tables of the ABAP/4 Dictionary or by the ABAP/4 program itself. The dynpro processor includes the error message into the received screen and returns the screen to the user. The message may be context-sensitive, that is, the system replaces placeholders in the message text with current field contents. In addition, only fields whose contents is related to the error and for which a correction may solve the error can accept input.
P.Naganjana Reddy
Data Consistency
To keep data consistent within complex applications, ABAP/4 offers techniques for
optimizing database updates that operate independent of the underlying database and correspond to the special requests of dialog programming. For more information on database updates, see Programming Database Updates.
Dynpro
Each screen contains fields used to display or request information. Fields can be text strings, input or output fields, radio buttons, checkboxes, or pushbuttons. The screen of Transaction TZ10 contains only texts and input/output fields.
An SAP dynpro consists of several components:
Flow logic: Calls of the ABAP/4 modules for a screen.
Screen layout: Positions of the texts, fields, pushbuttons, and so on for a screen.
Screen attributes: Number of the screen, number of the subsequent screen, and others.
Field attributes: Definition of the attributes of the individual fields on a screen.
SCREEN PAINTER
You create and edit all components of a dynpro in the Screen Painter. To call the Screen
Painter, create a dynpro in the Object Browser or double-click on an existing dynpro. The Object Browser then calls the Screen Painter. There, you can enter the flow logic of the new dynpro. By pressing the corresponding pushbutton you can maintain the Screen attributes, branch to the Full Screen-Editor or you choose the pushbutton Field list and change the attributes of fields.
Screen Attributes
From the users point of view, a transaction is a sequence of screens, displayed one after
another. How do I determine this sequence? The transactionss attributes determine the first screen to be displayed. The attributes of the individual dynpros determine which screen to display
P.Naganjana Reddy
after the current screen. You can also set the number of the subsequent screen dynamically from within the ABAP/4 program.
Layout
Choose Fullscreen to go to the screen editor. Here you can determine the layout of the
screen. For Transaction TZ10, the desired fields can be copied from Table SPFLI of the
ABAP/4 Dictionary.
Field Attributes
To display and modify the attributes of the individual fields (input/output fields, input
required, possible entries button, invisible, and so on), use the Field list.The fields Company (SPFLI-CARRID) and Flight number (SPFLI-CONNID) are defined as input/output fields. All other fields are used only for outputting the flight data.
Flow Logic
The flow control code of a dynpro consists of a few statements that syntactically ressemble ABAP/4 statements. However, you cannot use flow contol keywords in ABAP/4 and vice versa. You enter the flow control code in the Screen Painter as one component of the dynpro.
The flow control for the dynpro of Transaction TZ10 looks like this:
PROCESS BEFORE OUTPUT.
MODULE SET_STATUS_0100.
PROCESS AFTER INPUT
MODULE USER_COMMAND_0100.
The PROCESS statement names the event type for the dynpro and the MODULE statement tells the system which ABAP/4 routine to call for this event. In this example, there is only one MODULE for each event PBO and PAI. However, an event can contain several statements with several keywords. (The flow control language contains only few statement types. The most important are MODULE, FIELD, CHAIN, LOOP, CALL SUBSCREEN.) To display information on the statement syntax in the flow logic, choose Utilities Help on... in the flow logic editor. In the subsequent dialog window, mark Flow logickeyword, enter the name of the desired keyword, and press ENTER.
ABAP/4 Module Pool
In the Object Browser, the module pool code belongs to one of the following categories:
Global fields: data declarations that can be used by all modules in the module pool
PBO modules: modules that are called before displaying the screen
PAI modules: modules that are called in response to the user input
Subroutines: subroutines that can be called from any position within the module pool.
You use the ABAP/4 Dictionary to store frequently used data declarations centrally. Objects defined in the Dictionary are known throughout the system. Active Dictionary definitions can be accessed by any application. Data defined in the Dictionary can be included in a screen or used by an ABAP/4 program. You declare global data in the TOP module of the transaction, using the TABLES, STRUCTURE, LIKE statements and others. Transaction TZ10 accesses the Dictionary definition of Table SPFLI to provide the desired flight data display. If the TOP include contains the TABLES: SPFLI declaration, all modules in the module pool can access the table fields of
P.Naganjana Reddy
Table SPFLI. The PAI module USER_COMMAND_0100 checks which pushbutton the user activated (CASE OK_CODE). The Display pushbutton in Transaction TZ10 has the function code
SHOW. (For more information on handling function codes, see Processing User Requests). The program then tries to select those records in the SPFLI database that correspond to the data the user entered. The WHERE condition determines matching records by comparing the fields SPFLI-CARRID and SPFLI-CONNID with the database key fields CARRID and CONNID. As soon as a matching record is found, the database transfers all accompanying SPFLI fields to the program table.
When the screen is displayed again, the complete information appears in the output fields
of the screen. The system automatically displays these fields, since the ABAP/4 field names SPFLI-CARRID and SPFLI-CONNID are the same as the screen field names.
In the PBO module STATUS_0100 of Transaction TZ10, the screen 100 receives a GUI status (using SET PF-STATUS) and a GUI title (using SET TITLEBAR):
SET PF-STATUS TZ0100.
SET TITLEBAR 100.
A GUI status is a subset of the interface elements used for a certain screen. The status
Comprise those elements that are currently needed by the transaction. The GUI status for a transaction may be composed of the following elements:
The GUI title is the screen title displayed in the title bar of the window. In contrast to the
GUI status that can be used for several screens, a GUI title belongs to one screen.To create and edit GUI status and GUI title, you use the Menu Painter. To start the Menu Painter, create a GUI status or GUI title in an object list in the Object Browser (or double-click on an existing status or title).
Interaction between Dynpro and ABAP/4 Module Pool
In its most simple form, a transaction is a collection of screens and ABAP/4 routines, controlled and executed by a dialog processor. The dialog processor processes screen after screen, thereby triggering the appropriate ABAP/4 processing for each screen. For each screen, the system executes the flow logic that contains the corresponding ABAP/4 processing. The control passes from screen flow logic to ABAP/4 code and back.
The sequence of events for Transaction TZ10, for example, looks like this:
P.Naganjana Reddy
1.
In the PBO event, the statement MODULE STATUS_0100 passes control to the corresponding ABAP/4 module.In the ABAP/4 module pool, the screen to be displayed receives a menu interface.
2.
After processing the module STATUS_0100, control returns to the flow logic.For the PBO event, no further processing is required. The system display the screen and receives entries from the user. The entries are:
the values for the fields Company and Flight number.
the four-character function code that tells which pushbutton the user activated.
3.
The user input triggers the PAI event. The first PAI statement passes control to the ABAP/4 module USER_COMMAND_0100.Module USER_COMMAND_0100 processes the requests of the user.
4. After processing MODULE USER_COMMAND_0100, control returns to PAI. This terminates the dialog.
P.Naganjana Reddy
EXERCISE
Goto to ABAP editor, and enter the program name ZKA_SCREEN.
Declare the tables and call the screen.
In order to create the object, double click on the screen no, you will automatically guided to the screen painter SE51.
P.Naganjana Reddy
Enter the short description and click on the FLOW LOGIC tab.
Uncomment the flow logic, both PAI and PBO.
P.Naganjana Reddy
Now click on the LAYOUT button.
Click on the DICTIONARY/PROGRAM FIELDS WINDOW F6 button. Type in the table name and click on GET FROM DIC button and select the fields required for the screen and click on the COPY button.
P.Naganjana Reddy
Now drag and place the INPUT/OUTPUT fields box on the screen.
Now click on the TEXT FIELD button and place in the screen and stretch the box for the size required. Now double click on the box, U will get the attributes screen. Enter the name and Text for the field.
P.Naganjana Reddy
Now we need to place the bush buttons. So Click on the push button on the left side and place it on the screen. Double click on it, u will get the attributes screen. Enter the name, text and the icon required and mainly the FCTCODE. It is the one which links the screen painter with the code.
Once everything is set up, SAVE, CHECK and ACTIVATE the screen.
P.Naganjana Reddy
Click on the BACK button. U will be guided to the FLOW LOGIC screen.
Double click on PAI, Because for the screen painter with the fields, Process After the Input is done and so u will guided to the Editor screen.
P.Naganjana Reddy
Now we need to set the System-Uses commands which links the code to the Editor.
So the conditions would be:
IF SY-UCOMM = 'DISPLAY'.
SELECT SINGLE * FROM ZKA_CENTER WHERE CENTERNO = ZKA_CENTER-CENTERNO.
ELSEIF SY-UCOMM ='SAVE'.
INSERT ZKA_CENTER.
ELSEIF SY-UCOMM = 'REFRESH'.
CLEAR ZKA_CENTER.
ELSEIF SY-UCOMM = 'GOTO'.
LEAVE TO SCREEN '0002'.
ELSEIF SY-UCOMM = 'EXIT'.
LEAVE PROGRAM.
ENDIF.
If u create many screens and need links between the screens then u can use GOTO to guide to the other screen.
SAVE, CHECK and ACTIVATE and click on TEST.
P.Naganjana Reddy
Now click on the DISPLAY button.
Also verify with SAVE, REFRESH and EXIT buttons. Thus the screen painter.
P.Naganjana Reddy
TABLE CONTROL
Basic form
CONTROLS ctrl TYPE TABLEVIEW USING SCREEN scr.
Effect
Creates a table control ctrl of the type TABLEVIEW . The reference screen for the initialization is the screen scr . Area of use The table control (referred to here as TC ) facilitates the display and entry of one-line, tabular data in dialog transactions. The functional scope has been defined so that you can implement many typical set operations usually handled by an elementary STEP-LOOP with the standard methods of a TC . Functional scope
Resizeable table grid for displaying and editing data.
Column width and column position modifiable by user and by program.
Storing and loading of user-specific column layout.
Selection column for line selection with color selection display.
Variable column headers as pushbuttons for column selection.
Simple selection, multiple selection, Select/deselect all.
Scrolling functions (horizontal and vertical) via scroll bar.
Fixing of any number of key columns.
Setting attributes for each cell at runtime.
Programming The data exchange between the application and the SAPgui is achieved with a STEP-LOOP , i.e. an ABAP/4 module is called to transfer data for each page.
Example
Processing without an internal table
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL ctrl.
MODULE ctrl_pbo.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL ctrl.
MODULE ctrl_pai.
ENDLOOP.
In this case, the module ctrl_pbo OUTPUT is called once for each output line before the screen is displayed, in order to fill the output fields. After the user has entered data on the screen, the module ctrl_pai INPUT is executed to check the input and copy the new contents.
Example
Processing with an internal table
P.Naganjana Reddy
PROCESS BEFORE OUTPUT.
LOOP AT itab WITH CONTROL ctrl CURSOR ctrl-CURRENT_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT itab WITH CONTROL ctrl.
MODULE ctrl_pai.
ENDLOOP.
Here, the system fills the output fields before displaying the screen by reading the internal table itab. When the user has entered data, the module ctrl_pai INPUT must be executed to check the input and to refresh the contents of the internal table. Vertical scrolling with the scroll bar is followed by the event PAI for the displayed page. Then, cntl-TOP_LINE is increased and PBO is processed for the next page. Program-driven scrolling and the most of the functionality described above is achieved by manipulating the control attributes.
Attributes The CONTROLS statement creates a complex data object of the type CXTAB_CONTROL with the name of the control. You maintain the initial values in the Screen Painter and assign the screen with the initial values for a control using the addition USING SCREEN . Initialization is achieved automatically in the "1st access to the control" (setting or reading values). You can use the customizing button (in the top right corner) to save the current setting (column widths and column positions) and use it as the initial value for the next call. All the initial values can be overwritten by the program using the MOVE ... TO TC attributes statement.
EXERCISE
Enter the Editor with SE38.
Declare the Tables and an internal table.
Then use the CONTROLS statement to have the controls for the Table control.
P.Naganjana Reddy
CONTROLS: <var> TYPE TABLEVIEW USING SCREEN '<screenno>'.
Now call the screen with the CALL SCREEN statement. Click on the screen to draw the table.
Fill in the attributes screen with the short description and click on the LAYOUT button.
Now click on the TABLE CONTROL button and draw the table to the size required. Double click on the table and enter the Attributes giving the Table-control name.
And select the check boxes for the vertical & horizontal resizing and separators.
Click on the DICTIONARY/PROGRAM FIELDS WINDOW F6 button. Type in the table name and click on GET FROM PROGRAM button and select the fields required for the screen and click on the COPY button.
P.Naganjana Reddy
Enter the header with the TEXT FIELDS button by double clicking on the TEXT FIELD and fill in the ATTRIBUTES button with the name and text.
P.Naganjana Reddy
SAVE, CHECK & ACTIVATE.
Click the BACK button and go the FLOW LOGIC screen.
P.Naganjana Reddy
REPORT ZKA_TC .
TABLES: ZKA_EMP.
DATA: ITAB LIKE ZKA_EMP OCCURS 0 WITH HEADER LINE.
CONTROLS: TC TYPE TABLEVIEW USING SCREEN '0001'.
CALL SCREEN '0001'.
*& Module STATUS_0001 OUTPUT
text
MODULE STATUS_0001 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
SELECT * FROM ZKA_EMP INTO TABLE ITAB.
ENDMODULE. " STATUS_0001 OUTPUT
*& Module USER_COMMAND_0001 INPUT
P.Naganjana Reddy
text
MODULE USER_COMMAND_0001 INPUT.
IF SY-UCOMM = 'EXIT'.
LEAVE PROGRAM.
ENDIF.
ENDMODULE. " USER_COMMAND_0001 INPUT
P.Naganjana Reddy
TABSTRIP CONTROLS
A tabstrip control is a screen object consisting of two or more pages. Each tab page consists of a tab title and a page area. If the area occupied by the tabstrip control is too narrow to display all of the tab titles, a scrollbar appears, allowing you to reach the titles that are not displayed. There is also a pushbutton that allows you to display a list of all tab titles.
Tabstrip controls allow you to place a series of screens belonging to an application on a single screen, and to navigate between them easily. The recommended uses and ergonomic considerations for tabstrip controls are described in the Tabstrip Control section of the SAP Style Guide.
From a technical point of view, a tab page is a subscreen with a pushbutton assigned to it, which is displayed as the tab title.
The tabstrip control is the set of all the tab pages. Tabstrip controls are therefore subject to the same restrictions as subscreens. In particular, you cannot change the GUI status
P.Naganjana Reddy
when you switch between pages in the tabstrip control. However, they are fully integrated into the screen environment, so present no problems with batch input.
To use a tabstrip control on a screen, you must be using a SAPgui with Release 4.0 or higher, and its operating system must be Motif, Windows 95, MacOS, or Windows NT with version 3.51 or higher.
When you create a tabstrip control, you must:
Define the tab area on a screen and the tab titles.
Assign a subscreen area to each tab title.
Program the screen flow logic.
Program the ABAP processing logic.
You must then decide whether you want to page through the tabstrip control at the SAPgui or on the application server. In the first case, each tab page has its own subscreen. In the second, there is a single subscreen area that is shared by all tab pages.
Defining the Tabstrip Control Area and Tab Titles
You define both the tabstrip area and the tab titles in the screen layout. The tabstrip area has a unique name and a position, length, and height. You can also specify whether the tabstrip area can be resized vertically or horizontally when the user resizes the window. If the area supports resizing, you can specify a minimum size for it.
When you define a tabstrip area, it already has two tab titles. Tab titles are technically exactly the same as pushbuttons. To create additional tab titles, simple create pushbuttons in the row containing the tab titles. Tab titles have the same attributes as pushbuttons, that is, each has a name, a text, and a function code. You can also use icons and dynamic texts with tab titles.
Assigning a Subscreen Area to a Tab Title
You must assign a subscreen area to each tab title. There are two ways of doing this:
Paging in the SAPgui
You need to assign a separate subscreen area to each tab title, and define the function codes of the tab titles with type P (local GUI function). In the screen flow logic, you call all the subscreens in the PBO event. This means that all of the tab pages reside locally on the SAPgui.
When the user chooses a tab title, paging takes place within the SAPgui. In this respect, the tabstrip control behaves like a single screen. In particular, the PAI event is not triggered when the user chooses a tab title, and no data is transported. While this improves the performance of your tabstrip control, it also has the negative effect that when the user does trigger the PAI event, all of the input checks for all of the subscreens are performed. This means that when the user is working on one tab page, the input checks may jump to an unfilled mandatory field on another page.
P.Naganjana Reddy
Local paging at the SAPgui is therefore most appropriate for screens that display data rather than for input screens.
Paging on the Application Server
One subscreen area is shared by all tab titles and called in the PBO event. You define the function codes of the individual tab titles without a special function type. When the user chooses a tab page, the PAI event is triggered, and you must include a module in your flow logic that activates the appropriate tab page and assigns the correct subscreen to the subscreen area.
Since the PAI event is triggered each time the user chooses a tab title, this method is less economical for the application server, but the input checks that are performed only affect the current tab page.
Procedure in Either Case
You create the subscreen areas within the tabstrip area. You assign the subscreen areas to one or more tab titles in the Screen Painter by selecting one or more titles. You can also assign a subscreen area to a tab title in the tab title attributes by entering the name of the subscreen area in the Reference field attribute.
The procedure for the alphanumeric Screen Painter is described under Creating Tabstrip Controls.
If you are paging at the SAPgui, create a subscreen area for each tab title. If you are paging at the application server, select all tab titles and create a single subscreen area. The subscreen areas may not cover the top line of the tab area. However, within a tab area, more than one subscreen area can overlap.
Programming the Flow Logic
In the flow logic, all you have to do by hand is include the correct subscreens. The screen flow and data transport to the ABAP program is the same as for normal subscreens. There are two ways of programming the screen flow logic, depending on how you have decided to page through the tabstrip control.
Paging in the SAPgui
When you page in the SAPgui, you must include a subscreen for each subscreen area:
PROCESS BEFORE OUTPUT. ... CALL SUBSCREEN: <area1> INCLUDING [<prog 1>] <dynp 1>, <area2> INCLUDING [<prog 2>] <dynp 2>, <area3> INCLUDING [<prog 3>] <dynp 3>, ... ...
P.Naganjana Reddy
PROCESS AFTER INPUT. ... CALL SUBSCREEN: <area1>, <area2>, <area3>, ... ...
Paging on the Application Server
When you page on the application server, you only have to include a subscreen for the one subscreen area:
PROCESS BEFORE OUTPUT. ... CALL SUBSCREEN <area> INCLUDING [<prog>] <dynp>. ...
PROCESS AFTER INPUT. ... CALL SUBSCREEN <area>. ...
Handling in the ABAP Program
Before you can use a tabstrip control in your ABAP program, you must create a control for each control in the declaration part of your program using the following statement:
CONTROLS <ctrl> TYPE TABSTRIP.
where <ctrl> is the name of the tabstrip area on a screen in the ABAP program. The control allows the ABAP program to work with the tabstrip control. The statement declares a structure with the name <ctrl> . The only component of this structure that you need in your program is called ACTIVETAB.
Use in the PBO event
Before the screen is displayed, you use the control to set the tab page that is currently active. To do this, assign the function code of the corresponding tab title to the component ACTIVETAB:
<ctrl>-ACTIVETAB = <fcode>.
When you page at the SAPgui, you only need to do this once before the screen is displayed. This initializes the tabstrip control. The default active tab page is the first page. After this, the page activated when the user chooses a tab title is set within SAPgui.
When you page on the application server, you must assign the active page both before the screen is displayed for the first time, and each time the user pages. At the same time, you must set the required subscreen screen.
P.Naganjana Reddy
You can suppress a tab page dynamically by setting the ACTIVE field of table SCREEN to 0 for the corresponding tab title.
Use in the PAI event
In the PAI event, ACTIVETAB contains the function code of the last active tab title on the screen. When you page in the SAPgui, this allows you to find out the page that the user can currently see. When you page at the application server, the active tab page is controlled by the ABAP program anyway. The OK_CODE field behaves differently according to the paging method:
Paging in the SAPgui
When you page in the SAPgui, the PAI event is not triggered when the user chooses a tab title, and the OK_CODE field is not filled. The OK_CODE field is only filled by user actions in the GUI status or when the user chooses a pushbutton either outside the tabstrip control or on one of the subscreens.
Paging on the application server
If you are paging at the application server, the PAI event is triggered when the user chooses a tab title, and the OK_CODE field is filled with the corresponding function code. To page through the tabstrip control, you must assign the function code to the ACTIVETAB component of the control:
<ctrl>-ACTIVETAB = <ok_code>.
This statement overwrites the function code of the last active tab page with that of the new tab title. At the same time, you must ensure that the correct subscreen is inserted in the subscreen area. Otherwise, tabstrip controls are handled like normal subscrens in ABAP programs, that is, the ABAP program of a subscreen screen must contain the dialog modules called from the flow logic of the subscreen.
P.Naganjana Reddy
EXERCISE
Goto SE38. Enter the tabstrip program name Eg: ZKA_TABSTRIP and click on the create button.
First we need to declare the tables.
Then use the controls for the tabstrip.
Syntax: <ctrl-name> TYPE TASTRIP.
Now call the screen. Using CALL SCREEN statement.
Double click on the screen no to draw the screen for tabstrip control.
Now uncomment the FLOW LOGIC and click on the LAYOUT.
P.Naganjana Reddy
The flow logic for the tabstrip would be as follows.
PBO:
The PBO is initiated so that the subscreen for the corresponding tab can be maintained.
Syntax:
CALL SUBSCREEEN <sub-screen name> INCLUDING SY-REPID <screen-var>.
PAI:
When the tab is clicked, the corresponding subscren should open
Syntax:
CALL SUBSCREEN <subscreen>.
P.Naganjana Reddy
DRAWING THE TABSTRIP CONTROL:
Click on the TABSTRIP button and place it on the screen for the required size.
Double click on the control and give the name for the tabstrip control in the ATTRIBUTES screen.
Now double click on the tab and fill in the attributes screen for the name and the text.
Also draw the subscreen in one of the tab and refer the same subscreen in the rest of the tabs.
P.Naganjana Reddy
Now in the sub-screens, we need to get the screen for the tabs.
So call an other screen and draw with fields and pushbuttons to perform actions very similar like SCREEN WITH FIELDS (refer screen painter).
Enter the short description and click on the FLOW LOGIC tab.
P.Naganjana Reddy
Uncomment the flow logic, both PAI and PBO.
Now click on the LAYOUT button.
Naganjana Reddy.P
Click on the DICTIONARY/PROGRAM FIELDS WINDOW F6 button. Type in the table name and click on GET FROM DIC button and select the fields required for the screen and click on the COPY button.
Now drag and place the INPUT/OUTPUT fields box on the screen.
P.Naganjana Reddy
Now click on the TEXT FIELD button and place in the screen and stretch the box for the size required. Now double click on the box, U will get the attributes screen. Enter the name and Text for the field.
Now we need to place the bush buttons. So Click on the push button on the left side and place it on the screen. Double click on it, u will get the attributes screen. Enter the name, text and the icon required and mainly the FCTCODE. It is the one which links the screen painter with the code.
P.Naganjana Reddy
Once everything is set up, SAVE, CHECK and ACTIVATE the screen.
P.Naganjana Reddy
Click on the BACK button. U will be guided to the FLOW LOGIC screen.
Double click on PAI, Because for the screen painter with the fields, Process After the Input is done and so u will guided to the Editor screen.
P.Naganjana Reddy
Now we need to set the System-Uses commands which links the code to the Editor.
So the conditions would be:
IF SY-UCOMM = 'DISPLAY'.
SELECT SINGLE * FROM ZKA_CENTER WHERE CENTERNO = ZKA_CENTER-CENTERNO.
ELSEIF SY-UCOMM ='SAVE'.
INSERT ZKA_CENTER.
ELSEIF SY-UCOMM = 'REFRESH'.
CLEAR ZKA_CENTER.
ELSEIF SY-UCOMM = 'GOTO'.
LEAVE TO SCREEN '0002'.
ELSEIF SY-UCOMM = 'EXIT'.
LEAVE PROGRAM.
ENDIF.
The same procedure for the company table as well will lead the screen in the below manner.
P.Naganjana Reddy
Summary:
REPORT ZKA_TABSTRIP .
TABLES: ZKA_EMP,ZKA_COM.
CONTROLS: TS TYPE TABSTRIP..
DATA: SCREENNO(4) TYPE N.
CALL SCREEN '0003'.
*& Module STATUS_0001 OUTPUT
text
MODULE STATUS_0001 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
IF SCREENNO IS INITIAL.
TS-ACTIVETAB = 'EMP'.
SCREENNO = '0002'.
ENDIF.
ENDMODULE. " STATUS_0001 OUTPUT
*& Module USER_COMMAND_0001 INPUT
text
MODULE USER_COMMAND_0001 INPUT.
IF SY-UCOMM = 'EMP'.
TS-ACTIVETAB = 'EMP'.
SCREENNO = '0002'.
ELSEIF SY-UCOMM = 'COM'.
TS-ACTIVETAB = 'COM'.
SCREENNO = '0003'.
ENDIF.
ENDMODULE. " USER_COMMAND_0001 INPUT
*& Module USER_COMMAND_0002 INPUT
text
MODULE USER_COMMAND_0002 INPUT.
IF SY-UCOMM = 'DISPLAY'.
SELECT SINGLE * FROM ZKA_EMP WHERE EMPNO = ZKA_EMP-EMPNO.
ELSEIF SY-UCOMM = 'SAVE'.
INSERT ZKA_EMP.
ELSEIF SY-UCOMM = 'REFRESH'.
CLEAR ZKA_EMP.
ELSEIF SY-UCOMM = 'EXIT'.
LEAVE PROGRAM.
ENDIF.
P.Naganjana Reddy
Maybe you are looking for
-
How do I transfer photoshop from one computer to another? I have CS5. Since CS5 was an upgrade I installed CS4 first, but now I cannot figure out how to install the CS5 upgrade. Any advice?
-
Faster Importing From Mini Dv Tape...?
In Adobe Premiere Pro, is there a way to import from a mini dv tape faster than real-time?
-
Currently I'm not using Aperture 1.1, or 1.0 or at all. I don't want to spend an extra £350GBP to receive £130 Apple Credits/Vouchers to purchase V1.0 to upgrade through the web to 1.1 or now 1.1.1. As I don't need to bank with Apple. This means that
-
HT1454 Is it possible to use my ipod touch to use Facetime on my HDMI ported TV?
Is it possible to use my ipod touch with a HDMI adapter, to talk and use FACETIME on my TV, that has a HDMI connection?
-
Can you embed video/audio in a captivate file?
i was wondering if it's possible to somehow embed video/audio files in a captivate slideshow so that no sidecar files are required? or will i always need to keep seperate linked mp3 and flv files along side the captivate file? thanks!