Module Processor not getting executed

Hi All,
I hav created a module processor in the same way as it is mentioned in the pdf
https://websmp201.sap-ag.de/nw-howtoguides
-> exchange infrastructure -> how to Create Modules for the J2EE Adapter Engine.
But to my surprise, it is not working.I hav even enclosed the code that is displayed in the work bench showing whether the Module Processor is called or not.But while executing, nothing is displayed.Please help me out in this regard.
Thnx in Advance
Anil.

Hi Anil,
Just check the following ,
1.The JNDI name that you have given.
2.The order in which u have written the modules...that matters a lot.
3. The server in which you have deployed the bean
Regards
Divya

Similar Messages

"Local Module is not an executable or is a link" when starting Messaging Server

"Local Module is not an executable or is a link" when starting Messaging Server
<P>
If you see error messages like this one when you try to start Netscape
Messaging Server:<P>
19971009095543:Dispatch:Notification:Local Module (Account-Handler) is
not an executable or is a link.
Module not loaded.
Startup Problem:
Module Error-Handler is required for proper operation.
Netscape Messaging Server Exiting!
You may have a file permissions problem. This can happen if you change
the Unix account that Messaging Server runs as. Try changing the
permissions on the "bin" directory in your Netscape server root to make
sure that the current Messaging Server user account has access to it
(try granting public read and execute permissions to that directory);
this should solve the problem.<P>

BombingParadise wrote:
Found out I need the latest version. I try downloading the latest version before and it keeps giving me this error saying I need to retry later. I restart my computer and try it again but I'm still getting the error >:\No you don't, Minecraft is built for Java 6.
Amazing how you can do something as difficult as mod a game not yet built to be modded and yet not even know the basics of the basics of the command prompt, nor have the capacity to research it apparently.

Process chain infopackage not getting executed.

Hi,
We have a process chain in which one of the element for infopackage is yellow for more than last 5 hrs. On checking batch jobs i can see that job is ready but not getting executed.
I had gone into infopackage and pressed start but still it is showing old status.
I need to understand what is the problem and how it can be resolved ?
Please reply fast.

Hi Babu,
If the data has arrived into BW sysstem and the process chain has stuck. Then you can push the chain ahead of that step. Run the function module RSPC_PROCESS_FINISH in transaction SE38 The field entries required to run this function module can be collected in the table RSPCPROCESSLOG in traction SE16. Just provide the entries "Process Variants" and "Instance ID" and run execute the table and you will get all the required field entries to run the function module. usually give Log id, type, varient, instance id and status in function module and run. this will push ur chain ahead. The entries "Process Variants" and "Instance ID" in the process chain can be collected by right clicking the failed load and click on Chain tab.
Note; The status you have to set to G.
Hope this will help
Regards
Koushik

Queries are not getting executed in the EJB

Hi,
I am using Stateless EJB for database transactions. I have one getConnection() method in it which I am calling in every method for connection. I have created one more method in that I am executing one simple query for count(*) from one table and returning the count in the Web dynpro application. But I am not getting the count. It seems the query is not getting executed. I have added classes12 jar externally to the EJB and also to the WebDynpro application. Is there anything I am missing????
Thanks,
Swati Gaur

Hi Swati Gaur,
Did you print any logs in the your code to print the count after executing the query?
For debugging purpose you can try
System.err.println("Count after executing the query "+count);
count is the variable which contains the count after executing the sql query.
Check for the above statement in default trace. If count is printing in default trace then the problem is in your webdynpro code.
Hope this helps!
Regards,
Jaya.

Deadline branch not getting executed

Hi
In my BPM i have an infinite loop and also the deadline branch with inerval as 1 minute (for testing purpose) but when i send the message my deadline branch does not get executed after 1 minute and it keeps on waiting.
in the bpm monitoring it shows wait step created.
i have verified my design with the standard pattern available, and it is almost similar.
i am not able to find out the reason behind this strange behavior.
Regards
Dheeraj

Hi Saravana
i did exactly the same, i have my deadline branch, in it i have my control step which trows exception, which is catched by my exception branch and does nothing, so ideally it should continue the processing after that.
but the problem is the exception is never thrown.
my deadline has been configured as
Reference Date/Time: Creating the step
Duration: 1
Unit: Minutes
control step in deadline branch
Action: Throw Exception
Exception: Time_out
Exception branch
Exception Handler: Time_Out
and outside this block i have transformation and other steps... which shoul get excuted after 1 minute deadline.
Regards
Dheeraj

In PO Release "PO release effected" is not getting executed

Hi All,
           I am working on PO Release WorkFlow.
when I execute the WF of PO release, its executing the first task "please release PO" but when I relase the PO from my work place the second step "PO release effected" is not getting executed. I could not found why this is happening.
Please help me in this issue.
Thanks.
Ranganadh.

Thank You Adithya,
                                 I have copied the standard one i.e. WS20000075. I am executing the workflow directly from the Workflow builde by giving the PO number and release code.
with this in my business workplace I can able to find the workitem.
         I am releaseing the PO from the Workplace. After releasing the PO also I am getting the status of the workitem as "Inprocess".
         In workflow log I found that only first task (PO Released) has been executed the subsequent steps are not getting executed.
         Would be there any settings are missed out??
Thanks.
Ranganadh.

Tasks not getting executed as per schedule

Hello Gurus,
my query is with respect to tuxedo 7.1 / singleview 4.02.17.01.
I am facing some new issues these days with singleview.
Whenever we submit any task in singleview, it is not getting executed on its scheduled time.
this has been happening from past few days.
worstly,nothing has been found in logs.
Interestingly, twice it happened that i took down the application & after the app was brought up,these "NOT" executed tasks started automatically.
Why this could be happening?
unix file " stdout" <standard output> is getting written heavily & reaching its MAX size ( 2 GB) in less than 24 hrs.
i have changed its schedule as of now,but has it got anything with above problem?
Finally,i have generated a new "ubbconfig" for tuxedo which will help in maximising billing performance.
reason for this is in recent times i have observed that memory usage has increased .so this "ubb" contains maximum billing servers & rest minimum.if you have any idea on this,pls let me know.
your suggestions & corrections are welcome.
Thanks & Regards
Abhijeet K

Some follow up questions:
- How did you migrate (dsmig ldif or binary import)
- Did the accounts in .x have any custom password policies set?
For a "new" and a migrated entry, can you check if a passwordpolicysubentry is configured?
(search as directory manager and fetch the attribute)

Scheduled job not getting executed on a logical standby

Hello,
We have created a job(through dbms_scheduler API). The job is enabled and shows up in the SCHEDULERJOBS view also.
However the job does not get executed. I looked into the following tables there was no relevant entry found for the aforesaid job:
select * from all_scheduler_job_log
select * from dba_scheduler_running_jobs
select * from DBA_SCHEDULER_JOB_RUN_DETAILS order by log_date desc
Is there any limitation that we cannot execute scheduled jobs on a logical standby database. If i execute the relevant program (that is configured to be run as job in this scenario) as an individual procedure from SQL plus, it gets executed successfully implying there is no errors/problem in the subprogram that the job is going to invoke.
Appreciate your thoughts in this regard.
Thanks.

Hi Justin,
Thanks for your response.
As per the app design, the job invokes a stored program(that maps to a stored procedure present in standby db itself) that reads the data from standby and populates the relevant tables/entities in another database(third db, not primary or standby) which acts as a repository. No write operations are to be performed on standby.
So, i have two doubts:
-- Can scheduled jobs execute on logical standby db[Oracle release 10g(R2)]
I was going through few of the oracle docs and it is mentioned that this is a known limitation in 10g
R2 release and has been corrected in 11g. Now we have something called database_role
attribute that needs to be set to 'LOGICAL STANDBY' if you need to execute a job on
standby. However it is available in 11g onwards.
-- If there is no workaround for the above mentioned problem in 10g-R2 release.
Then we may have to schedule a job from third db instance that shall invoke the program(residing on the standby db). Can we have a scheduled job which executes a program that maps to a remote stored procedure instead of local stored procedure?
Appreciate your thoughts.
Thanks

Fault policies not getting executed for called BPEL process

Hi,
I am facing one issue in execution of fault policy for a called BPEL Process.
I have two BPEL Processes - BPELProcess1 and BPELProcess2.
We have fault-policies and fault-bindings file.
Case1 - BPELProcess2 is synchronous :-
BPELProcess2 throws a fault of selectionFailure.
Now this fault is defined in fault-policies and fault policy is bound to BPELProcess2 component in fault-bindings.xml file.
But this fault policy is NOT getting executed.
This selectionFailure fault from BPELProcess2 goes unhandled and in BPELProcess1, invoke activity gets this unhandled fault and raises a fault "remoteFault".
This remotefault is also defined in fault-bindings and bound to BPELProcess1 component. Here fault policy bound to BPELProcess1 is working fine.
So problem is that for called process, fault policies are not getting executed while for calling process, they are getting executed.
Case1 - BPELProcess2 is Asynchronous
BPELProcess2 is asynchronous. So same situation happening here. Fault policy for BPELProcess2 is not getting executed on throwing selectionFailure.
But now here, since BPELProcess2 is async in nature, BPELProcess1 is not getting response and it is always waiting for response which is wrong.
So how can we use fault policies in this case?
Please suggest.
Thanks & Regards,
Parshant

So that means - only fault originating from invoke activity in BPEL can be associated with a fault policy. No other fault can be associated. Even if I throw a selectionFault from throw activity, that will not be captured. Only fault from invoke activity can be associated with a fault policy.
Please confirm.
Thanks,
Edited by: 833944 on Feb 24, 2011 9:36 PM

BADI is not getting executed in Portal (Front end)

Hello Portal Gurus
We have developed a new enhancement recently and it is not getting executed in Portal...what will be reason...?
Can someone please help me out in this...

Hi Vijay,
It'll be a bit easier to point out some probable solutions if you can give some details regarding the error that you are getting... Also if you can mention the EP version it'll be great..
Thanks,
Pinac

Workflow not getting executed

Hello friends.
I am new to workflows. i have created a sample workflow to cteate a material and then to display it. i have created all the std tasks successfully, and also in the workflow builder all is fine. but when i try to test it by executing the workflow, it is not getting executed, it gives a status message saying "Current status in process". please tell me the solution for this.
Thanks and Regards.
Vishal VH.

Go and check what is happening in the workflow log.
After executing the workflow, run transaction SWIA and check the log. You can also check the containers there along with the graphical runtime display
Cheers
Anirban

Infopackage not getting executed through Process Chain

Hi All,
I am facing a strange issue in BW Process Chain. Sometimes 3 Infopakages in my Process Chain is not getting executed and the variants get stucked in Yellow state. I checked the status of variants in RSPCPROCESSLOG table and they went in Undefined State.
Can anyone tell why this happening and how to resolve that issue permanently.
Thanks,
Javed

Hi Javed,
When you trigger the process manually, it might work.
But, as Raman told - some times due to huge number of loads running at the same time, the Back ground processes will be heavily occupied and loads will stuck. By the time, you trigger them manually; they will be successful due to some of the back ground processes which becomes free by that time.
Though this will not happen all the time. But this can also be the reason. Try checking, if the loads are getting stuck in yellow with "Target event" "with parameter" getting generated in display messages --> chain tab or not.
Thanks,
Vikranth.

SQL not getting executed

Hi,
My sql below is not getting executed.There are no errors but even after long time it is not producing any thing (error or result).
I am getting results till the statement SELECT D.budeptmap_v88_dept_id ,
but when I right the last statement on top of this nothing is coming.
select u.dw_code_skey,u.dw_code from dw.agg_inscope_top_nodes t, dw.dw_codes u
where
t.TOP_NODE_TR_HDR_SKEY = u.DW_CODE_TR_HDR_SKEY
and u.DW_CODE_SUPERTYPE_CODE = 'DEPT'
and u.DW_CODE_DW_CUR_IND = 'Y'
and u.DW_CODE_DW_DEL_IND = 'N'
and u.DW_CODE in(
SELECT D.budeptmap_v88_dept_id
from DW.CLIENT_ACCOUNTS C,DW.AON_V75_V88_BU_DEPT_MAP_SDO D
WHERE D.budeptmap_v75_dept_id = '-1'
AND D.budeptmap_v75_bu_id IN(C.cli_acct_producing_offICE_code)
AND C.CLI_ACCT_DW_CUR_IND='Y'
AND CLI_ACCT_SKEY IN (
SELECT A.CLI_SUM_CLI_ACCT_SKEY
FROM PROFIT.FACT_CLIENT_SUMMARIES A
WHERE A.CLI_SUM_PERIOD_SKEY = 3
AND A.DM1_TOT_ADJUSTED_REV_AMT =
(SELECT MAX(DM1_TOT_ADJUSTED_REV_AMT)
FROM PROFIT.FACT_CLIENT_SUMMARIES B
WHERE B.CLI_SUM_ENTITY_SKEY =A.CLI_SUM_ENTITY_SKEY
AND B.CLI_SUM_PERIOD_SKEY =3)))
any help in tunning is highly appreciated.
Thanks in advance

how long does this query takes to complete?
        SELECT D.budeptmap_v88_dept_id
          from DW.CLIENT_ACCOUNTS C,
               DW.AON_V75_V88_BU_DEPT_MAP_SDO D
         WHERE D.budeptmap_v75_dept_id = '-1'
           AND D.budeptmap_v75_bu_id IN (C.cli_acct_producing_offICE_code)
           AND C.CLI_ACCT_DW_CUR_IND = 'Y'
           AND CLI_ACCT_SKEY IN (SELECT A.CLI_SUM_CLI_ACCT_SKEY
                                   FROM PROFIT.FACT_CLIENT_SUMMARIES A
                                  WHERE A.CLI_SUM_PERIOD_SKEY = 3
                                    AND A.DM1_TOT_ADJUSTED_REV_AMT =
                                        (SELECT MAX(DM1_TOT_ADJUSTED_REV_AMT)
                                           FROM PROFIT.FACT_CLIENT_SUMMARIES B
                                          WHERE B.CLI_SUM_ENTITY_SKEY =A.CLI_SUM_ENTITY_SKEY
                                            AND B.CLI_SUM_PERIOD_SKEY =3))

AOP JoinPoint not getting executed

The spring configuration that I have is
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:aop="http://www.springframework.org/schema/aop"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-3.1.xsd
http://www.springframework.org/schema/aop
http://www.springframework.org/schema/aop/spring-aop-3.1.xsd ">
<aop:aspectj-autoproxy />
<bean id="addCarrierService" class="com.service.AddCarrierService" />

<bean id="authorizeBeforeAspect" class="com.custom.AuthorizeBeforeAspect" />
<aop:config>
<aop:aspect id="aspectLoggging" ref="authorizeBeforeAspect">

<aop:pointcut id="pointCutBefore" expression="execution(* com.service.*.*(..))" />
<aop:before method="secureBefore" pointcut-ref="pointCutBefore" />
</aop:aspect>
</aop:config>
</beans>
And the join point class is
package com.custom;
import org.aspectj.lang.JoinPoint;
import org.aspectj.lang.annotation.Aspect;
import org.springframework.security.core.context.SecurityContextHolder;
import org.springframework.stereotype.Component;
@Component
@Aspect
public class AuthorizeBeforeAspect {
public void secureBefore(JoinPoint joinPoint) {
System.out.println("Inside AuthorizeBeforeAspect.secureBefore() method");
if (SecurityContextHolder.getContext().getAuthentication().getPrincipal() != null)
DEPUser user = (DEPUser) SecurityContextHolder.getContext().getAuthentication().getPrincipal();
AuthorizeBeforeAspect .java class does not get executed at all. Not sure where am I going wrong?

Hi,
Was the chain created and activated properly, try activating the chain once again, if there is an issue with any of the variants the process chian will not get activated and throw and error.
If this is not the case and if you are able to activate the process chain successfully, open the start variant and change the settings.
Right click on the start variant -> Select direct scheduling option.-> press Change selection button
Select immediate button and press enter. Now come back save the start variant and activate the chain once again.
Schedule the chain and it should run right away. Monitor the logs.
Regards,
Sudheer

Dead line block is not getting executed

Hi,
I configured BPM scenario to collect messages from one interface and create IDOCs in ECC.i configured with following steps
Start
Block(start of Block)
Loop(While 1=1)
receive
container step(to create multiline container)
endloop
Exception branch
Deadline branch(time 1 minute with control step)
End block
Transformation
send.
But deadline branch is not getting executed.its going to endless loop.
anybody got idea about the problem?

Make sure that:
1. your deadline branch has a control step raising the exception (and this exception branch could be empty, since it will only end the block; you can create another exception handler for specific application exceptions);
2. all the exception handlers are defined in Block step;
3. your correlation container is properly started and used by receive step (with the right fields being used for each correlation string).
And as best practices, make sure that:
1. your correlation is defined as local correlation in the Block step;
2. your loop step contains only the receive step (which starts process) and a container operation of type append, which appends the received message into a multiline container (do all mappings after the loop is complete).
Finally, save and activate your changes, go into SXI_CACHE transaction and check the returncode your BPM; it should be zero. Otherwise, there is something wrong with it.
Regards,
Henrique.

Module Processor not getting executed

Similar Messages

Maybe you are looking for