Module signing when keys are lost

Hello.
I built the nvidia driver for my custom kernel, but forgot to sign the nvidia and nvidia-uvm kernel module. Since i was building the kernel in tmpfs, the files needed for signing (signing_key.priv and signing_key.x509) are lost after a reboot.
Do i have to rebuild (and maybe re-install) the custom kernel, to re-create the files needed for sign-file or is there any other way?
Regards and thanks.

This is exactly what should happen. When you edit the original file, it will edit the unchanged original file. Then when you save the file from Photoshop, Lightroom will still apply its changes on top of what you did in Photoshop. The Lightroom changes are not lost but will be reapplied as soon as you save the file. At least that is what always happens when I do this.

Similar Messages

IPhone letters don't pop up when keys are pressed

You know how the letters pop up from under your finger when keys a pressed on the keyboard to let you know which key you press, well sometimes certain letters on my keyboard stop popping up. A restart fixes the key but a few minutes or hours (intermittent) later a different letter stops working. Anybody else have this problem?

The problem seems to be related to the Auto-correct and Auto-capitalization feature. If I turn either one off (Settings->General->Keyboard), I don't have the problem but when both are on, it comes back. It also seems to affect the first character that I type in the input field.
With both Auto features on, if I go to the login page of Twitter and type, say, a 'v' as the first character of the Username, a capital V is entered and the "V" pops up, but if I backspace, tap shift to go to lowercase and tap v again, the v does not pop up from the keyboard but it does show up in the username input field. I can reset things if I tap the Done button on the keyboard then tap in the username field to bring the keyboard back up. The problem is still there, but I can see it happen with a new letter if I want.
Try it and post what you find. You don't have to have a Twitter account to see it happen and I'd be interested to know if it's consistent.

PERFORMING FULL RECOVERY WHEN THE RECOVERY CATALOG AND CONTROLFILE ARE LOST

제품 : RMAN
작성날짜 : 2002-05-30
PERFORMING FULL RECOVERY WHEN THE RECOVERY CATALOG AND CONTROLFILE ARE LOST
===========================================================================
PURPOSE
Recovery Catalog와 Controlfile이 손상되었을 때 Oracle9i의 new feature인
Controlfile Autobackup을 이용하여 full recovery를 수행하는 방법을 알아본다
EXPLANATION
Catalog와 Controlfile이 모두 손상되었을 경우 full recovery를 수행할 수 있도록
하기 위해 oracle9i부터 Controlfile Autobackup이라는 New feature를 제공한다.
이 Feature가 활성화되면 RMAN은 자동으로 특정 형식(specific format)으로
controlfile을 backup한다 나중에 RMAN은 Recovery catalog를 access하지 않고도
이 backup을 인식할 수 있다. 이 형식은 "%F"라는 variable을 포함하는데
이 variable은 중요한 정보인 DATABASE ID를 포함하고 있다.
이것은 다음과 같은 CONFIGURE 명령을 사용하여 Turn-on 될 수 있다.
RMAN> configure controlfile autobackup on;
활성화시킨 후에 controlfile autobackup의 format을 변경할 수 있다. 그러나
이것은 반드시 variable "%F"를 포함해야만 한다. 그렇지 않으면 다음과 같은 Error
를 만나게 된다.
RMAN> configure controlfile autobackup format for
2> device type disk to 'c:\backups\%U';
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00579: the following error occurred at 01/31/2002 11:57:21
RMAN-03002: failure during compilation of command
RMAN-03013: command type: configure
RMAN-06492: controlfile autobackup format "c:\backups\%U" must specify a "%F"
format specifier
%F 는 RMAN이 recovery catalog 없이 backup piece를 인식하도록 Key이다.
이 Feature가 활성화 된 후에 RMAN은 BACKUP 명령을 수행할 때마다 controlfile에
대해서 별도의 backup을 수행한다. 이전에는, controlfile 은 오직 system
tablespace가 backup되는 경우에만 자동으로 backup되었다.
Database Backup은 아래와 같은 log를 출력한다.
RMAN> backup database;
Starting backup at 31-JAN-02
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=12 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=C:\ORACLE\ORADATA\PROD\SYSTEM01.DBF
input datafile fno=00002 name=C:\ORACLE\ORADATA\PROD\UNDOTBS01.DBF
input datafile fno=00005 name=C:\ORACLE\ORADATA\PROD\EXAMPLE01.DBF
input datafile fno=00006 name=C:\ORACLE\ORADATA\PROD\INDX01.DBF
input datafile fno=00008 name=C:\ORACLE\ORADATA\PROD\USERS01.DBF
input datafile fno=00003 name=C:\ORACLE\ORADATA\PROD\CWMLITE01.DBF
input datafile fno=00004 name=C:\ORACLE\ORADATA\PROD\DRSYS01.DBF
input datafile fno=00007 name=C:\ORACLE\ORADATA\PROD\TOOLS01.DBF
channel ORA_DISK_1: starting piece 1 at 31-JAN-02
channel ORA_DISK_1: finished piece 1 at 31-JAN-02
piece handle=C:\BACKUPS\01DFKAIH_1_1 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:01:56
Finished backup at 31-JAN-02
Starting Control File Autobackup at 31-JAN-02
piece handle=C:\BACKUPS\C-4159396170-20020131-00 comment=NONE
Finished Control File Autobackup at 31-JAN-02
Note:
Controlfile backup은 backup의 끝에서 수행된다.
그리고 이 backup piece name의 두번째 string은 dbid이다(4159396170)
Current controlfile이 database와 함께 손실되고 Recovery catalog도 손상되어
사용할 수 없게 되었을 때 controlfile autobackup이 controlfile을 restore하기
위해 사용될 수 있다. restore된 controlfile은 db를 mount하고 datafile들을
restore하기 위해 사용될 수 있다.
Controlfile autobackup을 이용하여 full recovery를 수행하기 위해서는 아래와
같은 과정을 수행하면 된다.
1. Target instance를 위한 new init.ora를 생성한다. backup이 있다면 이것을
사용할 수 있다.
2. Startup nomount your new instance.
3. RMAN은 시작하나 어떤 connect statement도 수행하지 않는다.
4. RMAN prompt상에서 DBID를 설정한다. 만약 DBID를 모르면 controlfile autobackup
의 이름으로부터 이것을 알 수 있다.
RMAN> set dbid=4159396170;
5. Dbid를 설정한 후에 nomount로 startup한 target instance에 connect한다.
RMAN> connect target /
6. 만약에 backup이 disk상에 있고 controlfile autobackup을 non-default location
으로 지정하였다면 파일을 다음과 같은 위치로 옮겨 놓는다
ON UNIX : ORACLE_HOME/dbs
ON WINDOWS: ORACLE_HOME/database
RMAN은 controlfile autobackup을 찾기 위해 위 directory를 검색한다.
만약 controlfile autobackup location을 바꾸지 않으면 위 directory안에
backup이 생성되게 된다.
만약에 backup이 tape에 있다면 restore시 channel과 device를 기술하기 위해서
run block을 사용해야 한다. database가 mount되어 있지 않기 때문에
default device와 channel을 설정할 수 없다.
RMAN> run { allocate channel c_1 type 'sbt_tape'
parms "ENV=(NB_ORA_SERV=rm-wgt)";
restore controlfile from autobackup;}
7. Restore the controlfile:
RMAN> restore controlfile from autobackup;
8. Mount the database from the restored controlfile:
RMAN> alter database mount;
9. Restore datafiles:
RMAN> restore database;
10. file들을 restore한 후에 recovery를 수행할 수 있다.
이때 current online redo log가 없고 또한 backup controlfile을 사용하기
때문에 incomplete recovery를 수행해야 한다. 이를 수행하기 위해서는
"UNTIL TIME"을 설정해야 하고 open시에는 resetlogs를 사용해야 한다.
RMAN> set until time=<time stamp>;
RMAN> recover database;
RMAN> alter database open resetlogs;
REFERENCE DOCUMENT
NOTE:174623.1

BACKUP Command Behavior
ON
If the backup includes datafile 1, then RMAN does not automatically include the current control file in the datafile backup set. Instead, RMAN writes the control file and server parameter file to a separate autobackup piece.
Note: The autobackup occurs regardless of whether the BACKUP or COPY command explicitly includes the current control file, for example, BACKUP DATABASE INCLUDE CURRENT CONTROLFILE.
OFF
If the backup includes datafile 1, then RMAN automatically includes the current control file and server parameter file in the datafile backup set. RMAN does not create a separate autobackup piece containing the control file and server parameter file.
BUT Dear Mohammed,
It is not working accordingly. what I did is :-
1. I switched off the AUTOBACKUP
2. Then I took whole database backup, that means it included File # 1
3. But according to above it is going to include autobackup of controlfile and spfile in the same backupset .
4. But when I asked it to restore controlfile from autobackup it said NO AUTOBACKUP FOUND.
COULD YOU PLEASE HELP ME ONCE AGAIN DEAR.
If it works accroding to above then it should have my Autobackup.
Regards
Harpreet Singh

Why two remote keys are genrated in data manager when i'm syndicating the same records twice

Hi Experts,
Please guide me that will there be any problem if two remot keys are getting generated for the same system thougt we are expecting to update the same Business Partner Number in ECC.
Also We are able to see two different business partner number(in ECC this is KUNNR in KNA1)
Please guide me how to proceed so that when we syndicate the same set of records we want to get update the records in ECC for the same KUNNR.
We don't want to get another KUNNR for the same records.
Thanks!
Pankaj

"barbara" wrote in message
news:506500000008000000FAC20000-1077587809000@exchange.ni.com...
> I'm using the simulation interface toolkit V2.0 but it works only the
> first time after the installation. When I restart again my computer it
> doesn't work any more. Why??????????
>
---snip
I am not familiar with the different software that you mentioned but as a
first step I would check compatibility which is done as below:
Get original operating system CD that was used to install Windows XP on the
machine in your post. When Windows XP is inserted into CD ROM drive it
normally will ask you to conduct compatibility check for the current
installation. See what it says.
HTH
Mohan Pawar
----snip

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. Now the cursor moves but cannot select anything. Suggestions?

I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. When opening up a browser or application, the cursor moves but cannot select anything. Suggestions?

Maybe something in these Apple support articles will help.
Keyboard Doesn’t Work
Keyboard Keys Do Not Respond
Keyboard/Mouse – Troubleshooting Wireless

I'm having a ipod nano which vl b in rectangular shape of 2" and when i connect my iphone's earpods d control keys are not workin. may i know d reason y its nt supporting?

i'm having a ipod nano which vl b in rectangular shape of 2" and when i connect my iphone's earpods d control keys are not workin. may i know d reason y its nt supporting?

I can't tell which iPod nano model you are describing. The EarPods listing at the Apple Store
http://store.apple.com/us/product/MD827LL/A/apple-earpods-with-remote-and-mic
Says (under Compatibility) that iPod nano 4th gen and later are supported ["Requires software version 1.0.3 for iPod nano (4th generation)"]. If your nano is 3rd gen or earlier, it will still work for audio, but some control buttons may not work.

Acrobat bookmarks are lost when resaving the file

Hi,
I am converting a docx to pdf using Save as --> PDF --> clicking on options and selecting create bookmarks using headings and publish.
The conversion is done perfectly. However after encrypting, or changing a name of a bookmark and saving after that, the bookmark links are lost. When I right click on any bookmark and checking there link, there is nothing.
I noticed that if I use Microsoft Word 2007 with SP2 this problem is resolved. However, I have various pdfs already converted (and don't have the original doc) which I need to encrypt. However this is not possible to do so as they lose their bookmarks.
Is there a solution for this?

I am seeing a similar bug in Acrobat, and I am seeing it in both Acrobat 7 and Acrobat 9.
If I have an open PDF, and I choose File > Save As, then rename the PDF, all bookmarks are lost.
Gone. Poof. Bye-bye.
If I rename the file in Windows Explorer, the bookmarks are retained just fine.
This happens without exception. Every PDF file.
I simply cannot use the File > Save As command at all. Ever.
First detected it in Acrobat 7, and I am still seeing this behavior in Acrobat 9.

MODULE POOL WHEN WE PRESS ENTER KEY IN A TBL CONTROL THEN CURSOR GO TO FIRS

DEAR ALL,
IN MODULE POOL WHEN WE PRESS ENTER KEY IN A TBL CONTROL THEN CURSOR GO TO FIRST INPUT/OUTPUT BOX I WANT THE CURSOR WILL STAY ON THAT TBL CONTROL COLUMN.
PLZ TELL ME HOW I CAN DO THIS.
THANKS
SHASHI
Moderator message: no upper case please, search for available information before posting.
Edited by: Thomas Zloch on Mar 11, 2011 11:50 AM

Hi,
This is possible only for check boxes and radio buttons.
for others you atleast need to double click.
please note double click is possible.
regards
Ramchander Rao.Krishnamraju

The headers are lost when poped up in Chrome

I set the authorization header and other self-defined header in URLRequest. It works work well in Chrome when I use URLLoader to load this request. However,when I use navigateToURL(request, "_parent"); to pop up a window, the headers are lost. And I don't know who is responsible for it.Anyone can give me an idea to work around.Thanks in advance

See http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

When i want to install itunes 10.5 there is an error (some keys are not found). Can someone help me, please???

When i want to install itunes 10.5 there is an error (some keys are not found). Can someone help me, please???

I have solved the Problem

On my keyboard, a few of my keys are using incorrect letters or symbols, but when I replaced the keyboard that did;t fix it.

On my keyboard, a few of my keys are using incorrect letters or symbols, but when I replaced the keyboard that did;t fix it. Help.

The the box check in System Preferences - Keyboard - Use F1, F2 ......... if so uncheck the box.

How detect shift key release when both shift keys are pressed

Why is no event fired when a shift key is released if both shift keys were pressed?
1. Press left shift - keydown event
2. Press right shift - keydown event
3. Release left shift - no event
4. Release right shift - keyup event
So, we have two keydown events and just one keyup event.

I think that the two shift keys are logically the same key and both provide VK_SHIFT. Since they are the same key, it's still down when the left key goes up and so no up fires. This behavour is inherited from the underlying keyboard input system and is the
same as you'll see if you handle WM_KEYDOWN and WM_KEYUP in a Win32 app.
You can differentiate the VirtualKey.LShift and RShift keys with CoreWindow.GetKeyState() or GetAsyncKeyState(), but there isn't a direct way to catch your state #3 in action.

When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get

When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get the right profile available?

First, the required profile needs to be present. LR 5.4 supports the X-T1 in terms of understanding its Raw format, but will not come with a profile for every lens which can be mounted onto that.
A profile is made for each specific lens, as mounted on a certain camera. It can also be used with pictures taken on a different (reasonably similar) camera body than the one originally used during profiling. This is subject to the sensor format: you can employ a given lens profile made for full frame, on an image from a crop sensor behind the same lens - but not vice versa.
Next, the image type needs to correspond to the image type which has been built into the profile: Raw, or non-Raw.
Lightroom offers only profiles of the right type for the image(s) concerned. There are many more provided for correcting camera Raw, than for correcting camera JPG. That is also the case with additional profiles, e.g. those accessed via the Adobe lens profile downloader utility.
Finally, in the event that there simply is no profile out there for a given lens, it is not particularly difficult (though a little tedious) for the end user to generate one, using a further Adobe utility which is downloadable as a package, including a range of checkerboard calibration targets, each of which needs to be printed at a stated physical size.

HT4710 When copy my IPhoto 7.1.5 Library on my desk computer and open it on my laptop w/IPhoto'09, many albums/slideshows are lost because of compulsory "upgrade." Help!

When copy my IPhoto 7.1.5 Library from my IMac and open it on my MacBookPro, which has IPhoto'09, many albums/slideshows are lost because IPhoto '09 insists that I click on 'upgrade' before it will open the 7.1.5 Library. Help!

The library is damaged in some way.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Module signing when keys are lost

Similar Messages

Maybe you are looking for