Modules not found after upgrade to 0.7.1

My last upgrade prior to 1/05/06 was 10/30/05 and that boot was labeled 0.7.1.
I switched to udev some time ago.
The upgrade today seemed to run perfectly (I'm impressed by the obviously skilled work in this process) and I monitored the questions and executed the instructions, including the addition of initrd to grub menu.
System boots properly and I can log in as user.
The command 'startx' produces too many screens to read (I know-use script) but the final display is "no drivers, no modules found, one of which is 'ati'". Please let me know if you need the full error output of startx.
Did I miss something in the upgrade messages which, of course, are gone now?
Thanks,
Bill Barnes

install the drivers:
look here for migration
http://www.archlinux.org/blog/2006/01/0 … rade-xorg/

Similar Messages

[SOLVED] Modules not loaded after upgrade linux (3.9.5-1 - 3.11.6)

Hi. After upgrading the package linux from 3.9.5-1 to 3.11.6,
many modules such as wifi or psmouse are not loaded.
My PC is Asus Zenbook UX31E.
If I do by hand like
# modprobe ath9k
# modprobe psmouse
wifi and psmouse are OK,
but I want to set all necessary modules auto loaded.
* Output of lsmod of linux 3.9.5-1 was 87 rows
but lsmod of 3.11.6 (I attache below) is only 39 rows.
* Both
/etc/modprobe.d/
/etc/modules-load.d/
are empty on 3.9.5-1 and 3.11.6.
Please give me advice, thx.
Last edited by taro (2014-01-08 11:20:46)

Thx. The version numbers seem to be identical.
% uname -a [~]
Linux tenryu 3.11.6-1-ARCH #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013 x86_64 GNU/Linux
% pacman -Qi linux [~]
Name : linux
Version : 3.11.6-1
Description : The Linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.11.6
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 64493.00 KiB
Packager : Thomas Bächler <[email protected]>
Build Date : Sat 19 Oct 2013 06:25:12 AM JST
Install Date : Fri 08 Nov 2013 12:06:17 PM JST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : None
best regards.

IPhoto Library Not Found after Upgrade to Leopard

I was running the newest iPhoto under Tiger and I just upgraded to Leopard. I tried to open iPhoto and a message said, "iPhoto library not found." It was there before I upgraded from Tiger. I mostly use Adobe Bridge so I didn't have much in iPhoto but I'm curious to see why the library disappeared and whether it can be restored. I looked all around on the hard disk and didn't see the iPhoto library anywhere. Thanks.

Yes, it must have been upgrade and install because I followed the defaults. The iPhoto library was in the Pictures folder in Tiger and I never moved it. After the upgrade to Leopard, it was gone--it is no longer in my Pictures folder, nor does it seem to be anywhere else. I didn't touch it--the upgrade made it disappear. Why did that happen? What can be done about it? Thanks very much.

Bluetooth was not found after upgrade to 10.4.2

Does anyone know how to bring back Bluetooth device after upgrade from 10.3.9 to 10.4.2? I've already check my system profiler, and it shows, "No information found" on the bluetooth hardware. On the Apple task, the bluetooth icon shows, "the bluetooth: not avilable", and it color is gray. Thanks.

Wittaya,
You have an Aluminum Powerbook and you've posted in the Titanium Powerbook forum area. You would want to post your problem here:
http://discussions.info.apple.com/webx?14@@.59999943

Library not found after upgrading to iTunes 7, old libraries don't work

For the second time since iTunes 7 was released, I've been asked to upgrade and did so without issue on the first day of upgrading. When I shut my computer down and came back the next day, however, the library is not found when I attempt to launch iTunes. Before, I simply reverted to iTunes 6 and copy/pasted a "previous library" as the current library. Now, though, I have a new iPod and it needs iTunes 7 to run. I've tried copy/pasting a previous library to the iTunes Library folder with no luck.
90% of my music is in the .m4a format so I need iTunes to listen! Not to mention, I need it to update my brand new iPod. I really need help on this, can someone give any advice? Thanks in advance.

johnc86,
Are you following the instructions from this article in the Apple Knowledge Base, in particular the renaming of the .itl file from the Previous Libraries folder?

Express Card Driver Not found after upgrade to 10.6.7

I upgraded my macbook pro to version 10.6.7 recently and later found out that the express card 34 slot drive was missing and could not access my Sony SxS cards. After some extensive search I found the site where I could retrieve the driver from. It is listed below. Worked for me! It should work for you also.
http://support.sonybiz.ca/esupport/Navigation.do?filetype=Drivers
SxS Device driver Ver. 1.0.52020 forMAc (Oct 2010)

Hi,
I need to configure a copier konica minolta 7145 with IP-432 on Mac OS X 10.6.7.
the copier has never been used before on this computer, can you tell me how to print with the Konica on mac, which drivers to install, what kind of cables and which procedure.
Thanks a lot!

Kde4-config: command not found (after upgrade of kde4 to version 4.6)

When I upgraded my KDE desktop to latest version, it seems that it has removed the kde4-config command.
Unfortunately I don't know which package it belongs to?
I get the error when I execute startkde script from ~/.xinitrc
I have tested to re-install KDE but it doesn't resolve my problem.
Anyone know which package it is?

Ok, very weird, I re-installed latest version of kdelibs again and now I have the kde4-config command.
Problem solved.
Thanks!

Camera not found after upgrade to snow leopard

when i try to open the iphoto, photobooth it says "camera cannot be found". I am very upset now, what happened? I just update to ios 10.6.. Please help!
Thanks!

Try troubleshooting the iSight built in camera > How to Troubleshoot iSight

20" Apple Cinema Display not recognised after upgrading to OS 10.8.2 (Mountain Lion)

20" Apple Cinema Display not recognised after upgrading to OS 10.8.2 (Mountain Lion).
Hello Apple! Anybody there? How long does your community have to wait for a solution?
The same problem has been unsolved for months now. No statements from Apple either.
I was told today to wait for 10.8.3. This might solve the issue. I can not belive my ears.
My MacBookPro 4,1, Intel Core 2 Duo with 2.5 GHz Processor and Graphics chip: NVIDIA GeForce 8600M GT, will not talk to the exter. 20" Cinema Display ( Model Number A1081 ). The screen stays black. Resetting the PRAM did not help. I removed the 'com.apple.windowserver.plist' and the 'com.apple.windowserver.OE35739etc,etcxxxxxxxxxxx.plist', but that did not help either.
Any other solutions, or do I have to downgrade or give up on Apple Computers alltogether after using them for over 25 years?

I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

My built in camera is not working after upgrading to a new Skype version

my built in camera is not working after upgrading to a new Skype version

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
Help please

Hi asalamk,
The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

"Module not found" in Apple Mail

Hi all,
Many times when I edit a new message in Apple Mail, images do not appear after I drag them to the new email. Instead, a sentence appears. My System is in Spanish language and I haven't had the chance to see it in English but it is something like "Module not found".
This message, instead of attached images, appears randomly so it's very difficult for me to say why is this happening. It happens in some emails I receive so I have to ask them to send them over again. In some emails received with this problem, the images appear time after if I check them back again.
I deleted and added again my email accounts, but this didn't help. I use MobileMe and Gmail.
If someone in this forum can help me or has got a clue about this, is very frustrating as I'm a graphic designer and there are attached images in almost every email I send or receive.
Thanks a lot!

Hola Carola!
That's what I'm talking about! I work as a Graphic Designer and it's quite absurd how I can not appreciate the images my clients send me to show changes or reviews inside the email's body.. it's not just sending but reading the images the issue remains.
You like me (as many) don´t have enought time to reset or re-install the entire operative system (where the Apple mail is packaged) to fix such a basic problem.
Apple had closed other discussions like this one with no response.
-La verdad no entiendo que exista este detalle tan básico para un ordenador hecho para el sector creativo-
Estoy creando un hashtag en twitter #modulenotfound a ver si consigo algo por ahi.. Saludos desde Madrid

ISCSI initiator not connecting after upgradation

HI,
iSCSI initiator not connecting after upgradation from windows 2003 STD to windows 2008 STD R2 server, upgradation was successfully completed, except Microsoft iSCSI initiator connectivity, the initiaor interface show it as 'reconnecting'....!!!!!
Kindly guide on this.
Thanks in Advance

HI Shaon Shan,
Thanks for the info.
While searching for the file names start with iscsi in c:\windows\system32 folder the file version is 5.2.3790.3825 in working windows 2003 server.
Recently I've downloaded (Not yet installed) iSCSI initiator for Windows 2008 from Microsoft website in that iSCSI initiator file version shown as 6.3.4.1, instead of using inbuilt Microsoft iSCSI initiator in W2K8, shall I try installing the downloaded
version,
because when I checked in Windows 2008 (Upgraded version) the iSCSI file version remains the same as 5.2.3790.3825 which was found in windows 2003.
Post to our previous discussion
While I'm trying to install the new iSCSI initiator for Windows 2008 downloaded from Microsoft website, it shows some error "Setupcould not find the update.inf file needed to update your system" then I've updated my server, but no luck still showing the
same....!!!!

Function Module not found in SRM 7.0 -CRM_ORDERADM_H_SELECT_BUF_M_DB

Hi Masa/Muthu/Viru ,
We have upgraded from SRM 3.0 to SRM 7.0.
we have copied the ZUS2000113 from Business object BUS2000113 for Contract workflow.
In SRM 7.0 the above Function Module not found in SRM 7.0 -CRM_ORDERADM_H_SELECT_BUF_M_DB.
Can you telll which is the replacement of this FM
Regards
G.Ganesh Kumar

Hello,
What is the aim of FM name you gave us ?
What is its function group ?
With those data, it could be easier to find an existing one with same goal in SRM 7.0 release .
Regards.
Laurent.

Iphone 4 Home button not working after upgrade to OS 4.3.5

Iphone 4 Home button not working after upgrade to OS 4.3.5.Please help!!!!!!!!

It seems that settings of mail accounts have something to do with it. I've delete my gmail account and am now using Microsoft Exchange. It seems better, yet not perfect. The issue is definitely due to OS 4.3.1
Apple answer is - no answer. It is a shame that the quality of their products, in terms of design and concept, is not match by a care for customers. It is not normal that I, as a customer, have to spend hours reading Apple Discussions forum to try to understand what the problem is. A little more respect for a customer that spend big $$$ buying their products wouldn't hurt.

Modules not found after upgrade to 0.7.1

Similar Messages

Maybe you are looking for