MOH and Media Bypass no longer working after Skype Business updates

Not using the Skype Business skin but still using the Lync Enterprise 2013 skin
1 - MOH still works ok with call park but not for basic Lync to Lync calls or Lync to PSTN calls. Basically I noticed that CsClientPolicy EnableClientMusicOnHold was now set to false instead of true and so I set it back to True and set the music file path
as per below. Now when I place a call on hold I hear the new soft swoosh sound for going on hold but I don't not hear any music. Under Options>Ringtones and Sounds I have the following file selected: C:\Program Files\Microsoft Lync Server 2013\Application
Host\Applications\Conferencing Attendant\Media\Music\DefaultHold.wma which seems to work fine for call park but not basic call HOLD. Note: the Hold/Resume functionality/sip signalling works ok - any ideas?
2 - My current setup is with a Mitel MiVB PBX connected via a sip trunk (does not support TLS/SRTP and so it is disabled and using TCP/RTP) to Lync Enterprise 2013 with redundant mediation servers Ms-1 and Ms-2. I have Network Configuration > Global
> Enable media bypass and Always bypass selected and enabled, as well, under Voice Routing > Trunk Configuration > [Encryption support level = Not Supported / Refer = 3rd party / Enable media bypass = enabled / Centralized media processing =
enabled] ... after the update the media is not bypassing mediation servers anymore ... any ideas as to why?

MOH issue: Thx but i have tried many times without success, I even added and pointed to a new file magicHold.wma (BTW DefaultHold is a .wma file and not .wav) which I have set for both Call Park hold and basic call hold (i can see the file is selected
under the lync client options > Ringtones and Sounds > Play MOH + <.wma file path>. The magicHold.wma file is played ok during call park but for basic call there is still still NO MOH regardless of which file I select for basic call MOH
- I have restarted my VM-Front End server box without any chnage - is there anything else that could possibly be affecting this? Also when I capture the RTP on the mediation server I don't see any MOH RTP being sent from Lync to PSTN when on hold. Please advise
if anyone has any other insight.
Set-CSClientPolicy –Identity Global –EnableClientMusicOnHold $true –MusicOnHoldAudioFile “\\lyncservername\LyncMOH\DefaultHold.wav”

Similar Messages

I used to move an e-mail from my account to a local folder by click and drag which nio longer works after recent system updates but the move to does work.

I'm using Thunderbird (a very good product) on an 8.1 system. I recently performed Microsoft updates and disk maintenance. I no longer can move an e-mail from my Thunderbird account to a local folder using "click and drag". I can't find a solution. The "move to" works just fine.
Thanks for any help. Jim.

hold shift while Thunderbird starts.
In safe mode does it work?

HT6114 My double clicks no longer work after doing this update. What happened?

Double clicks in iPhoto no longer work after doing the update. Trying to troubleshoot, but feeling dense in that I can't get this thing to work. Any suggestions, please?

Try this thread > https://discussions.apple.com/message/23317566#23317566

HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
Go figure? Logical, No!

Numbers 09 and Pages 09 no longer work after 10.6.5 update

I have the last version of iWork 09. After the 10.6.5. update Numbers 09 and Pages 09 no longer work.
Keynote 09 is fine.
Both Numbers 09 and Pages 09 open, the window for choosing a template also opens.
I am not able to choose a template. Waited for several minutes ... no chance.
Removed the software, re-installed from DVD, updated to the latest version ... this did not solve the problem. Contacted Apple support , went through many steps with no success.
Were you able to use Numbers 09 and Pages 09 after recent Mac OS X update ?
Any ideas what I could do ?
Thank you for help!

May you try to run the applications from an other user account ?
If they behave flawlessly, the culprit is in your original user account.
In such case, it's often one or several preferences files which are corrupted.
Try to
quit the applications,
move the preferences files :
<startupVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Numbers. plist
<startupVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Pages.pl ist
to the desktop
restart the apps.
If they behave flawlessly, you know the culprits. Trash them.
Yvan KOENIG (VALLAURIS, France) dimanche 14 novembre 2010 19:34:52

Apogee Jam No longer working after 1.1 update?

My apogee jam is no longer working after updating to Garageband 1.1. I have an Ipad 2 with firmware 4.3.3.
Specifically what happens is:
1. I open the garageband app
2. I select the guitar amp
3. I plug the Jam chord into Ipad (guitar is already connected to cord)
4. Jam light goes green, blue, bright green then green
When Jam light goes bright green, the monitor button in garageband goes dim and doesn't work.
I've tried plugging my guitar in first, then starting garageband, no difference in results.
I have tried turning the monitor "on" prior to pluging in the jam, when I do this the monitor/sound gate window stays open until the Jam bright green goes on, then it disappears and the monitor button goes dim.
Outside the garageband app, the ipad does recognize the Jam in settings, general.
What's worse (for me...) is that I backed up the Ipad in itunes thinking that app data would also be backed up (as I read that in a description of backup). I then deleted garageband from the ipad and then restored it from itunes. Guess what, lost all my songs... Bummed out... Why wouldn't my songs be backed up???
Anyway, any ideas on the Jam issue would be greatly appreciated. I'm hoping I am just overlooking a setting?

Unfortunately, I don't believe that Apple keeps prior versions of Apps available at the store. GB was the first app I purchased there day one of my Ipad, incredibly worth the $, and I did actually look to see if you could go back legitimately.This is just one of the many reasons to JBreak your devices, so that you can go backward if you need to. This is a perfect example of why Apple should make prior versions available, but they think they know it all and never make mistakes, so that will never happen. Again, this is why folks take things into their own hands and why the scene exists. There are plenty of abuses, more than not IMO, but here is a perfect example of how people are screwed and can't use their Jams any longer without a JBroken device. They obviously know that this issue exists, they have employees on these forums. It will be months if ever they fix this issue, because the number of owners of Jam, although in the thousands, is small potatoes compared to the Apple owner universe. I believe it will only be fixed if Apogee is able to put enough pressure on Apple. If you see the Jam removed from the Apple store and GB site you know that Apple is choosing not to fix it, because they won't sell or promote it directly and then have to deal with complaints and returns. But even this will happen slowly...
Actually it occurs to me that Apogee may have to redesign the Jam AGAIN in order to get it working with 1.1 on Ipad 2 and Iphone 4s (devices with the newer processor). I wonder if they will recall or replace the Jams for people who now have Jams not compatible with Garageband. Again, Apple should be posting a warning for Jam owners on the Garageband download page, but that will never happen because Apple doesn't care about small potatoes.
Message was edited by: Rickd3333
Message was edited by: Rickd3333

Apps no longer work after installing ipad2 update 4.3.5

Apps no longer work after installing IPad 2 update 4.3.5

i am having the same issue as well. whats worst is that i bought that app. you guys can try "Office to PDF" thats is the one that is currently not working for me.

Autofill no longer works after recent Firefox update

The Auto-fill function on google toolbar no longer works ever since I updated to newest Firefox

See this for support information about the Google Toolbar.
[http://www.google.com/support/toolbar/?hl=en]
Or visit the Google Toolbar forum.
[http://www.google.com/support/forum/p/Toolbar?hl=en]

CP60-615DX Touchpad and external mouse no longer work after WIndows 7 SP1 update

Let me start by saying I am in the IT field, though clearly far from being great at it. I was updating a CP60-615DX at work with Win 7 x64 SP1. It installed with no errors or anything I'd consider abnormal. Once it was finished, the touchpad no long worked, as well as any mouse I'd hook up via Usb. So I checked Device manager, and the Touchpad is listed with the yellow exclamation mark, as well as mice I hook up. So I did what any respectable IT guy would do, I went to HP and downloaded x64 drivers for the Touchpad port and installed them. But they didn't fix the issue, literally nothing happened. So I installed the latest chipset drivers. Still nothing changed. So I uninstalled the device and manually added it by doing the advanced driver install for a new device, pointing it to the directory where the .exe file had placed the drivers. ...Nothing. So I uninstalled SP1,.... nothing. After uninstalling SP1, redid every aforementioned step, nothing. So my question is, **bleep**? Anyone know another way to fix an issue where the scrolling devices stop working and the drivers won't fix the issue?
Btw, the user had never set up windows restore, and my only other thought is pulling personal documents off and restoring to factory defaults. One more bit of info before I forget, when I went into Windows Recovery (which loads a pre-environment mini OS for you to restore and fix issues), the mouse worked, telling me it's not a hardware issue, it's a Windows vs devices issue.

Hi,
According to your description, since system reinstallation is not helpful, it's probably a hardware problem, it would be better to check if it is the device itself problem.
Roger Lu
TechNet Community Support

Volume and Eject Keys No Longer Work After Boot Camp 2.1 Update

Earlier this evening I allowed the Apple Software Update app in Windows to update Boot Camp to version 2.1. I allowed the computer to restart following a successful installation of the update. I've restarted two more times since then. Ever since the update (including before the computer restarted for the first time following the update), the volume and eject keys on my keyboard don't work. I also have an Apple Wireless Keyboard (one of the 2003-2007 era white/clear ones) and it exhibits the same problem. Both keyboards otherwise work fine. The computer also otherwise works fine, and there's no evidence of any driver problems.
Some other potentially relevant information:
1- The Boot Camp icon is no longer present in the Windows System Tray.
2- The Boot Camp Control Panel is still present in the Windows Control Panel and it works fine.
3- All settings in the Boot Camp Control panel are unchanged from their defaults. In particular, I have confirmed that "Use all F1, F2, etc. keys as standard function keys" is still unchecked.
4- The Windows Device Manager properly recognizes both keyboards as Apple Keyboards.
I'm using Windows Vista Ultimate on an early 2008 MacBook; system specs are in my signature. Any ideas?
Thanks for taking the time to read this, and double-thanks if you can respond with any suggestions!

Ah, the joy of working with computers...:( Apparently, from my woes with the same problem, the Apple Keyboard Manager is rightfully entered into the Run directory in the Windows registry at HKLM/Microsoft/Windows/Current Version/Run.
Why it doesn't start I still have to find out, but this may be because I have Parallels Workstatio installed as well and switch back between a virtualized Windows and a Bootcamp Windows. However, after installing Bootcamp 2.1 first and then SP3 IN THE BOOTCAMP ENVIRONMENT everything seems to work, except the Energy Options taskbar icon and Apple Keyboard Manager.
Will keep you posted on any progress I make.
Apple Support, BTW, was absolutely abysmal, with them even refusing to accept the ticket at all, on the grounds that they have no knowledge about Windows. Apple, get your support fixed!

This Nightly feedback, Steganos password Manager drop and drag functionality no longer works after last update.

Cut and paste still works but the drop and drag so longer works.
This for Nightly Beta 64 bit.

I too have the problem: W7 64 bit. Drag and drop worked until yesterday when I "upgraded" to FF v 26.0 - I can no longer drag passwords etc from my password manager to website fields - a barred circle appears when I try to drag.
I tried pressing ESC (one profferred solution) and also reset FF to no avail.
This is more than annoying: some of my passwords are dozens of characters long and there's no way I can access sites by typing them in! I need a solution, even if it's reverting to a previous version.

Onboard Mac Lan no longer works after 1.9 update!!!

I was using bios v1.8 and both my Mac Lan and my Giga Lan were working perfectly fine. Now that i updated to v1.9 my Mac Lan no longer works but my Giga is fine!!!
My Mac Lan still gets an ip address from my router, but i cannot ping the router nor anyone else on the network and my internet does not work!! So right now im using my Giga lan but i want my other one working like it was.
I tried going BACK to v1.8 but it did not fix the problem, so i went back yet again to v1.9 and im still left with the same problem. Ive tired disabling it and re-enabling it in both the bios and in windows and still nothing. Ive also tried re-installing the drivers and that did not work either. I even ran a Winsock Fix but that didn't fix the problem either.
Is anyone else having this problem besides me? what can i do to fix it???

Download new bios and extract it to a directory where you can find it (root of c:\ if you are lazy like me). Run wminfo if you are paranoid about losing your mac address and copy it down for your nvidia adapter.
Restart windows in safe mode. Close every application down in task manager.
Run winflash as described below and CHECK ALL THE RIGHT BOXES TO UPDATE BOOTBLOCK AND TO CLEAR THY CMOS. Read Syar's description below as that is what I used:
Quote from: syar2003 on 30-July-05, 00:24:48
No , floppy flash is not neccesary !
Can use
C:\Program Files\MSI\Live Update 3\FlashUty\Award
winflash.exe
Place checkmarks on bootblock/dmi area/update all/clear cmos
During flashing you see it will verify the programming of the bios chip .
And the good thing is unlike dos flash you can redo it if it fails , just by starting taskmanager and kill winflash.exe
and start over (as long as the machine isn't powered down or restarted).
I always say no after the flashing when asked to restart , exit the winflash utility , make a normal shutdown , turn off PSU for 10 seconds , then turn back
on , enter bios and load optimized default , followed by a boot to build/update dmi pool .
Kill all unwanted apps in the systemtray before running winflash and dont have any other applications running .
Best way is to boot to windows safemode .

SCIM no longer works after last package update

I just did the usual
sudo pacman -Syu
and now SCIM Pinyin chinese input no longer works:
When I press the hot key to enable chinese input, it only shows "English/European" in the notification bar that pops up, and I cannot enter chinese characters. Also after activating the hotkey, the backspace key suddenly no longer works anymore, until I disable SCIM again by pressing the hot key once more.

Thank you, actually it worked again after a reboot. (No idea why.)
I reboot this PC very very rarely, it's not supposed to be rebooted.
Last edited by mir91 (2014-07-10 02:00:07)

Synchronize By Audio No Longer Works After 7.2 Update

After installing the Premiere Pro CC 7.2 update, the synchronize by audio no longer works correctly. When you highlight the clips and sync by audio it acts like it's doing something but then puts the clips nowhere near close being a match (usually one clip on one side of the timeline and the one on the other).
Is anyone else having this issue? I've run into it on two seperate computers bothe running Premiere Pro CC 7.2 on Windows 8.1 machines.
- Dennis

Bumping this. I'm a brand new CC subscriber and the sync function was a big part of why I moved to CC. 50% of the time it works, but the rest of the time, it pushes the video clip much farther down the timeline.
Update 1: To clarify, I am doing this from the sequence itself. So tracks A1/V1 are the original audio/video from camera, then A2 is my sound I want to sync.
It does not seem to have a problem syncing the same "problem" clips when I use the "Merge" by Audio from the Bin.
Update 2: I found that, if I unlink the original A1/V1 clip, then select all three (A1/V1/A2) and Synchronize, it works.
Obviously, this is an unacceptable workflow, but I hope that helps Adobe figure out what's going on here.

Speakers no longer work after Mountain Lion update.

After my update of Mountain Lion my speakers in my macbook pro no longer work. The speaker symbol is grey and the volume can't be moved. Anyone else have this issue?

Seems there is no real solution to this problem. If you have a time machine backup you can go back to 10.7.2.
Since I did the clean install of 10.7.2, I don't have any audio problems. My MacBook Pro now runs smoothly. I guess I stick with 10.7.2 until 10.7.4 is released.
You can also try some of these suggstions: https://discussions.apple.com/thread/3705456?start=15&tstart=0
Hope you get your audio working.
AJ

MOH and Media Bypass no longer working after Skype Business updates

Similar Messages

Maybe you are looking for