MoH live feed via E&M card

CUCM 10.5, 2911 router with E&M card
I understand the basics of making this work with multcast.  Blocking the source from the CUCM so the phones listen to the router instead.
Does this work on MGCP?  Will my E&M card work not being programmed into the CUCM?  Does my voip dial-peer even work in MGCP?  I did this years and years ago with an H323 srst GW but a little different setup and want to make sure before I get to far.

Yes
Appendix B: Integrating Cisco Unified Communications Manager and Cisco Unified SRST to Use Cisco Unified SRST as a Multicast MOH Resource
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/SCCP_and_SIP_SRST_Admin_Guide/srst_appendix_b.html 

Similar Messages

  • MoH Live-Feed

    Per the .pdf titled "Integrating Cisco CallManager and Cisco SRST to Use Cisco SRST as a Multicast MOH Resource" an FXO port can be used to attach a "live" MoH stream via a Cisco gateway.
    One of the listed restrictions is:
    "An FXO port can be used for a live feed if the port is supplied with an external third-party adapter to provide a battery feed."
    Does anyone know of an adapter that will provide the battery feed? I have searched the Valcom, Bogen, Anixter and Greybar websites without any luck. Google has no idea what I'm looking for.
    Thanks in advance.

    I got this working today on CME 4.0 IOS ver 12.4.9T, 2811 Router...here is how:
    I used an VIC2-2E&M card
    ** Configuration **
    voice-port 0/0/0
    auto-cut-through
    operation 4-wire
    signal immediate
    no vad
    dial-peer voice 100 pots
    description ** LIVE MOH FEED **
    destination-pattern 5555
    port 0/0/0
    ephone-dn 100
    number 6666
    description ** LIVE MOH FEED **
    moh out-call 5555
    telephony-service
    multicast moh 239.10.16.8 port 2000
    ** TO BUILD CABLE **
    purchase a #274-286 1/8" phone plug at Radio Shack. Solder one solid phone wire to the tip and one wire to the base of Phone Plug. Crimp other end of Tip wire to pin #3 and base wire to pin #6 in a RJ45 connector. Plug into live MOH source (radio or MP3 player with 1/8" headphone jack). Make sure you do 'no shut' on voice-port 0/0/0.

  • Live Feed MOH on CME using FxO Port - Distortion

    We are implementing MOH on CME using a Live Source via an FxO port on a 3825 Router running 12.4(3b) - CME v3.3 The Live Source is clean, however, when it plays through the router, the quality is terrible (clipping, distortion, etc). The quality does not improve by adjusting the volume of the source and we have tried another FxO port on another WIC. We are using a Radio Design Labs Model ST-TC1 Telephone System Coupler as recommended.
    We have also adjusted the impedence on the FxO port with no improvement.
    Any help is greatly appreciated.

    is QoS configured on the 3825? once the stream comes from the FXO it should be prioritized throughout the rest of the network that supports the IP phones. ie: routers & switches.
    also you might want to make sure MOH is using multicast vs unicast; can help reduce network resource consumption
    see the link below for more info:
    http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800bd9ec.html

  • Shop purchases not showing up in admin live feed

    Hi I have set up a test shop, and succesfully can make payments via paypal standard yet these purchases and activity not showing up in admin live feed, am I fogetting to do something?
    Hope someone can help, determined to get this solved.

    Make sure that the payments are marked as PayPal Succeeded and not Pending
    or something like that, because then they won't show up in the live feed.
       shop purchases not showing up in admin live feed  created by VickiTuch<http://forums.adobe.com/people/VickiTuch>in
    eCommerce - View the full discussion<http://forums.adobe.com/message/5096415#5096415

  • How to have a live feed from application server log file (realtime viewr )

    how to have a live feed from application server log file (realtime viewr for apps log files)
    hi , thank you for reading my post.
    is there any way to have a live feed of Application server log ?
    for example is there any application that can watch the log file and show the changes as new log items come in ?
    can some one with more experience help ?

    Your question would be more suited to the Developer Forums
    http://devforums.apple.com
    but anyway...
    My goal is to develop a web application that is able to run on iPhone too, to capture the audio and video content from its camera and mic.
    Web Apps running in Safari don't have access to the camera or mic hardware.
    Or I should built a native application distributed through Apple store?
    That is your only option, although such a system already exists:
    http://itunes.apple.com/us/app/ustream-live-broadcaster/id319362690?mt=8

  • How do I put all my live feeds into one channel? I don't want to have to cick on each feed source separately.

    How do I put all my live feeds into one channel? I don't want to have to click on each feed source separately. Instead of one feed per website I want just ONE feed for all my sources together.

    Hi there old45,
    You may find the information in the article below helpful.
    iTunes 11 for Windows: Change where your iTunes files are stored
    http://support.apple.com/kb/PH12365
    Consolidate your files in the iTunes folder
    You can consolidate all the files in your library in the iTunes folder—for example, to make it easier to move your library to a new computer.
    Choose File > Library > Organize Library.
    Select “Consolidate files.”Files remain in their original locations, and copies are placed in the iTunes folder.
    To create folders (Music, Movies, TV Shows, Podcasts, Audiobooks, and so on) inside your iTunes folder, and place all your imported media files in the appropriate folders, select “Reorganize files in the folder ‘iTunes Media.’”
    Locate your iTunes files
    Do either of the following:
    Find out where a file is stored: Select the item in iTunes, and choose File > Get Info. The path to the file is shown at the bottom of the Summary pane (next to Where).
    Show the file in Windows Explorer: Select the song, and choose File > Show in Explorer.
    -Griff W.

  • I just bought something via my debit card but since i set my payment menthod to none and now i cant set my payment information back ...Its declined my card how i can solve this problem thankyou

    I just bought something via my debit card but since i set my payment menthod to none and now i cant set my payment information back ...Its declined my card how i can solve this problem thankyou

    I think the problem lays with Last.fm. I had the same exact problem as you. In your processes screen, end the task "lastfmhelper.exe" Last.fm still scrobbles. The tracks don't skip, although I notice there is still a bit of a lag in the first part of the song - but if you can deal with that, no skipping. I think you will have to end that task everytime you boot up your computer, or uninstall last.fm completely until they fix it; it is a bug in their software, as opposed to iTunes.

  • Video Camera Live Feed

    Hey all!
    I'm planning to use a video camera to show a "live feed" of an audience during an award ceremony. I have a slight problem as I was planning to create animations in flash and put them into a Keynote presentation. I cannot pre-record these "live feeds" as I was also going to show the winners of awards on the stage through the camera. Is there an application that allows you to show live feeds through either a Keynote presentation or even just full screen, as I will be showing the Keynote through a projector.
    Thanks a lot,
    James

    You can have live video inside a keynote slide if that's what you are looking for. I just did it with a network camera. The problem is that it has about a three second delay... but if you want to show your local audience a remote "live" video within the presentation (without switching out and back), you can.
    If you can open the stream with quicktime, save it as a quicktime movie and then import the movie in the slide. When played, it will connect and show the video, live minus a couple of seconds (in my case).
    Playing a different source, such as a firewire DV stream would be great but I have not found out how. For now.
    If you want to switch from a keynote presentation to video without a switcher, you can command-tab to a software that displays a full-screen video. For that I use EyeTV in full-screen mode at the same time as I play my presentation... need to show the video? click option-tab to switch back and forth between the two apps.
    Hope this gives a few ideas.

  • Can I capture and record live feed on "Final Cut Pro X"?

    I am an intern at my church and we are wanting to finish upgrading everything to mac at the church but we are needing a program that can capture live feed and later edit it so that I can create TV programs; hence, why I am needing to know can Final Cut Pro X capture live feed and record it? Along with that I need to know can I import avi. video files into Final Cut Pro X and it still allow me to edit them for our TV program? Thank you ahead of time for all of your help. Right now we are capturing in SD and I need to make sure it will also not be a problem capturing in SD and will make a smooth transition when we go to HD.

    See here:
    Re: import live video hvr v1e
    The above discusses HDV over firewire which is high def,  DV will be the same  deal.
    So it depends on what type of camera you are going to use.
    If you jump to an AVCHD USB cam the game changes.
    So far I'm not aware of a direct import method.
    There are workarounds with additional equipment at present.
    Al

  • Blog subscibe live feed won't load

    I created a blog on iWeb and published it to .mac. I subscribed to my blog using Live Feed. As long as Firefox was open the subscription worked. I could see the blog entries in the bookmark toolbar. However after closing and reopening Firefox when I pull down the same Live Feed link in the bookmark toolbar it gives me an error message saying that the Live Feed failed to load. I also tried subscription using applications other than Live feed and those didn't work either. Any ideas?
    power book   Mac OS X (10.4.9)  

    ANYONE???

  • Can you enable subtitles on Sky News live feed

    So Sky News is one of the new apps on the latest update. I am wondering if it is possible to enable subtitles on the live feed? This way it could be a cost effective route for the sky news feed you see in control rooms.

    Not sure.
    Ensure subtitles/closed captioing is enabled in Settings.
    When you use Sky News on AppleTV try holding the select button while playing - it may give an option to enable subtitles - if not it's probably not supported.
    AC

  • I have downloaded some videos to my ipad via my SD card now my storage is full, how can I transfer the videos off my ipad to clear the storage but keep the videos on another media device (external hard drive)?

    I have downloaded some videos to my ipad via my SD card now my storage is full, how can I transfer the videos off my ipad to clear the storage but keep the videos on another media device (external hard drive)?

    There are some wireless external hard drives that can be used with the iPad.
    Best iPad External Hard Drive Storage Options
    http://www.unlocktips.com/2012/11/best-ipad-mini-external-hard-drive-memory-stor age-options/
    iPad Storage Solutions
    http://www.ipadstoragesolutions.com/iPadWirelessStorage.php
     Cheers, Tom

  • Audition 1.0 - Problem beim aufnehmen von Live-Streams via RealPlayer

    Ich hoffe, das mir jemand weiterhelfen kann. Es geht um folgendes:
    Ich nehme mit Adobe Audition 1.0 einen Radio-Live Stream via RealOne Player 10 übers Internet auf.
    Die reale Zeit der Aufnahme entsprach genau 60 Minuten, aber die aufgenommene Zeit der Audiodatei nur 55 min. Was heißt das nun ?
    Innerhalb der Aufnahme wurde in regelmäßigen Zeitabständen für mehrere Sekunden nichts aufgezeichnet, d.h. ich habe Aussetzer im Audiomaterial über die gesamte Datei hinweg !
    Hört sich echt scheiße an !
    Ich habe das Problem durch verschidene Testläufe schon soweit eingegrenzt, daß ich genau sagen kann, es liegt definitiv am Programm RealPlayer 10 - also weder an der Hardware (incl. Soundkarte) noch an Adobe Audition selbst. Da bin ich relativ sicher, da es in diesen Fällen geklappt hat !(keine Aussetzer).
    Ich habe die Verbindungs-Einstellungen im RealPlayer (RTSP/PNA)so belassen, wie sie waren, also nur die Standardwerte genommen !
    Ach ja, mit dem Windows-Media Player habe ich es auch mal versucht. Da ich aber nur eine ISDN-Verbindung habe, war die Qualität dieser Streams noch schlechter als beim RealPlayer, sodass diese Möglichkeit für mich nicht in Betracht kommt ! Ich benutze übrigens das Betriebssystem Windows 98 SE.
    Kann mir jemand sagen, wie ich dieses Problem beheben kann ?
    Vielleicht durch irgendwelche Änderungen der Verbindungs-einstellungen (RTSP/PNA)?
    Bin mit meinem Latein am Ende !

    Hi,
    ich denke mal das es daran liegt das zu viele Anwendungen (oder auch nur eine) im Hintergrund liegen die zu viel Systemresourcen benötigen. Virenscanner sind da so ein Schlagwort. Einfach mal STRG+ALT+ENTF drücken (fals das bei WinSE so geht) und mal schauen wiviele Programme denn so laufen. Dann unter "Prozesse" nach denen Ausschau halten die ständig viel CPU-Auslastung benötigen und eventuell abschalten. Des weiteren könnte es natürlich auch am Rechner liegen. CPU und RAM wären da zu nennen. Möglicherweise ist der Rechner einfach nur überlastet.
    Gruß, Marc

  • Problems watching BP live feed on Safari

    *+Is there a system setting somewhere where I could choose to open these kind of links in Quicktime player, (open url), instead of in my web browser, or to disable that Safari as the default application to open this kind of file/command so I could attempt opening them in another browser?+*
    I have been trying to watch the live feed from the gulf oil spill.
    When I do it causes Safari to freeze up. And it leaves windows open that require some skill to close.
    Here is the address with a list of feeds available, depending on whether they are up and running.
    http://www.bp.com/genericarticle.do?categoryId=9033572&contentId=7062605
    When I click on one of the links it immediately opens up two pages, one with a BP page, (clearly that could have a live feed window on it, but doesn't), and another with a grey page with a quicktime window attempting to load, and an unresponsive Safari in the meantime with the spinning beach ball. (Summer fun!)
    When the live feed is up, after Safari is unresponsive while it loads, it will eventually play, although I will get erratic behavior like an occasionally spinning beach ball, with Safari temporarily frozen. The individual tabs cannot be closed. The only way to get out is to close both tabs by clicking the red button on the window, and immediately pressing ok to close all tabs before the beach ball starts spinning again.
    I have tried opening these pages and links in Firefox and Chrome, and strangely when I click the live feed links, it automatically opens them in Safari anyway. ??? Is there a system setting somewhere where I could choose to open these kind of links in Quicktime player, (open url), instead of in my web browser, or to disable Safari as the default application to open this kind of file/command so i could try them in another browser?
    FYI, I do have a couple of plugins installed, one is Perian, and another is flip4mac.

    HI,
    If you right or control click a clear space anywhere on the page that link opens, the press Command + F on your keyboard, type in QuickTime. You won't get a response. They aren't using QT as their video format. In fact, I cant' figure out which one they are using.
    I tried the same thing you did... no luck. You might try their web index page here: http://www.bp.com/siteindex.do?categoryId=9009861
    I can't find anything on their site or the HTML what video format they require for this. I have Silverlight / Fliip4Mac / QT / and Flash so it's not one of those and my Java is turned on in Safari/Preferences - Security.
    If it's just the video you are looking for, you can watch BP trying to seal the cap at the CNN site.
    http://www.cnn.com/
    When you click on the CNN / BP video you will be asked if you want to install a video enhancement plugin.. just click yes. The video will work after that.
    Carolyn

  • While viewing some video or watching live feeds iPad is kicking back to iPad home page.

    Recently, I have begun experiencing some glitches while viewing videos from Facebook and while watching Big Brother Canada live feeds.  While watching the iPad will kick back to the iPad home page.  When it does this it can take several seconds (an eternity compared to normal) to load the home page icons.  It sticks on the blurred background without any icons for as stated several seconds.  When I attempt to return to the live feeds I get the message "there was a problem with the page and it had to be reloaded.  Can anyone help?  Could this be a lack of memory because I haven't purchased additional storage space from iCloud?

    IIt has nothing to do with ICloud storage. ICloud storage is for backups only and not for actual cloud staorage. Your problem could have something to do with the iPad 2's lack or RAM while running iOS 8. Try closing all other apps when you want to watch videos and see if that makes a difference. ResER your iPad as well after you close the apps.
    In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    In order to reset your iPad, hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears on the screen after which time you can release the buttons and let the iPad start up.

Maybe you are looking for