MOH not working in cucm only beep sound

HI,
I have an IP Telephony set up running on CUCM 9.1.Publisher and subscriber in a single site deployment model.
Customized MOH were configured and running fine before.Now users are complaining that MOH is not working(both internal and external calls) and only beep sound is hearing  when putting on hold .
I have checked the MOH server is registered and I have restart  the Cisco IP Voice Media Streaming App service for both pub and sub
But when i am selecting the Sample Audio source its working fine and I can hear the cisco sound on MOH.
I have added another audio source for testing and assigned to the phones but result is same.
Multi cast allowed on the Audio source and its enabled in the MOH server.
Attached the screen shot for MOH audio source and MOH server.
Please advice how to fix this issue.

Beep sound indicates configuration issues, few things to check:
Make sure the DP assigned to the MOH server is set to use G711 between other regions, unless you enabled other codecs in service parameters
Make sure the MOH file is uploaded to all servers
Make sure the MOH server is assigned to MRG/MRGL of the devices needing to connect to it (phones, GWs, etc).
Can you try using unicast vs. multicast to see if that fixes it?
Chris

Similar Messages

  • The side scroll bar is locked and I don't know what to do.  Also video does not work.  I only get sound.

    The side scroll bar is locked so I can't read anything on the web.  Also, I cannot get any video on YouTube, etc.  It is a black screen.

    See the troubleshooting for a white-screen included here:
    iPod touch: Hardware troubleshooting

  • Party Entrance Tone not working on CUCM 10.5(1.10000.7)

    Party Entrance Tone not working on CUCM 10.5(1.10000.7) . This is an intermitent issue for Meet Me conference.
    ++On the CUCM Service Parameter Party Entrance Tone has is TRUE .
    ++On Directory number Party Entrance Tone is ON . However the Party entrance tone (Beep tone) not coming when Meet Me conference going on .
    Gateway 3945 with IOS Version 15.3(3)M5, RELEASE SOFTWARE (fc3).
    The conference Configureation as below.
    sccp local GigabitEthernet0/0
    sccp ccm 172.20.0.152 identifier 1 priority 1 version 7.0
    sccp ccm 172.20.0.153 identifier 2 priority 2 version 7.0
    sccp ccm 172.22.0.110 identifier 3 priority 3 version 7.0
    sccp ccm 172.22.0.111 identifier 4 priority 4 version 7.0
    sccp
    sccp ccm group 1
     bind interface GigabitEthernet0/0
     associate ccm 1 priority 1
     associate ccm 2 priority 2
     associate ccm 3 priority 3
     associate ccm 4 priority 4
     associate profile 2 register ASB-DR-GW04CFB
     associate profile 1 register ASB-DR-GW04XCO
    dspfarm profile 1 transcode 
     codec g711ulaw
     codec g711alaw
     codec g729ar8
     codec g729abr8
     codec g729br8
     codec g729r8
     maximum sessions 60
     associate application SCCP
    dspfarm profile 2 conference 
     codec g729br8
     codec g729r8
     codec g729abr8
     codec g729ar8
     codec g711alaw
     codec g711ulaw
     maximum conference-participants 32
     maximum sessions 12
     associate application SCCP
    Can any one tell me how the party entrance tone happening when a confernce session open.Is it generated from the hardware Confernce resource which configured on the gateway while mixing the RTP streams ? Is there anything to do with CUCM or any service in CUCM to generate the Party entrance tone ?

    Hi,
    It looks like the following bug
    https://tools.cisco.com/bugsearch/bug/CSCup27560/?referring_site=bugquickviewredir
    MeetMe Party Entrance Tones stop working
    CSCup27560
    Description
    Symptom:
    - MeetMe party entrance tones stop getting played to participants when they join/leave
    - The issue will go away for a few weeks if the CCM service is restarted, but then will come back.
    - When the issue comes back, it fails 100% of the time.
    Conditions:
    This problem would occur when we have user having a call from user in different node initiate transfer and also initiate MeetMe and dial user in different node. When transfer completes, we will have a leak in current node MeetMe. This issue should have been there in all CCM versions.
    Workaround:
    Restarting the CCM service will correct the problem temporarily.
    You can either try the workaround or upgrade to one of the fixed versions.
    HTH
    Manish

  • My youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome

    my youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome. At times it also say QuickTime Player can't open "video.3gp". and
    The file may be damaged or may not be a movie file that is compatible with QuickTime Player. when i try to open a video on youtube on safari

    I too am having the same issue as the OP.
    Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
    Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

  • My podcasts do not show the pictures only the sound when I import them to iTunes from Garage Band.  How do I get the pictures to show up in iTunes?

    My podcasts do not show the pictures only the sound when I import them to iTunes from Garage Band.  How do I get the pictures to show up in iTunes?

    Well, all I can tell you is that if your file is an m4a with chapter markers, those markers having suitably sized images attached, and you drag it into the Music area of iTunes (so that it appears as a song) in List view, when you play it and then command-click on the small image in the header (next to the progress bar) you should see your embedded images.
    If this isn't happening the best place to ask would be in the GarageBand forum: my own experience of GB is rather out of date and in any case I've never used it for podcasting.

  • What should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

    what should i do my sleep/wake button on iphone 5 does not work properly it only works if i press on the left side of it and my iphone still on warranty i heard its a common problem

    If there's a hardware defect and your phone is under warranty, bring it to Apple for replacement.

  • I bought a new IPHONE from apple reseller and the earpiece is not working . There is no sound .Speaker and headfone are working but earpiece is not working . How can i get it replaced.

    I bought a new IPHONE from apple reseller and the earpiece is not working.
    There is no sound .Speaker and headfone are working but earpiece is not working.
    How can i get it replaced.

    You can get service information on this web page.
    Regards.

  • Iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

    iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

    First, try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
    If this does not help, connect in recovery mode and restore, explained in this article: iOS: Unable to update or restore

  • In google chrome my keyboard does not work, but seemingly only on a particular website....any suggestions?

    my keyboard does not work, but seemingly only on a particular website while using Chrome....any suggestions?
    Using a MacBook  OSX 10.9.2   

    does it work in other browsers?  Also, what website?   When did this start happening?

  • I just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear

    i just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear. Please advice how to downgrade to the previous OS

    Please try going to your settings area of your display. Click on General and go to 'reset all settings'
    Good luck!

  • HT6154 My volume button is not working and I have no sound from my iphone4s

    My volume button does not work and I have no sounds on my iphone4s ever since I downloaded ios8....maybe coincidence...

    Maybe.....

  • My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

    My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested.  How can there be audio issue for all these devices at the same time?
    As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

    Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
    I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
    What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
    Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
    Peace,
    P. Dreadie

  • Sound not working in iTunes only

    For awhile after downloading the newest iTunes 7 version everything was going well, until one day I restarted my computer and now I don't have sound. Everything runs and plays correctly, but there's no sound. I know there's nothing wrong with my speakers because everything besides iTunes is working normally. Any suggestions as to what may be wrong?

    Same issue here. The sound no longer works in itunes only. The sound works fine in all other applications, passes the quicktime hardware tests. I have uninstalled and installed itunes for windows. All music appears to play, but no sound. Black diamond runs across as normal, videos appear to play - you can see the video, but there is no sound.
    The last change to my system was the installation of the video game "Need for Speed" which has since been removed.
    Itunes 7.2.0.2.16   Windows XP  

  • MOH not working in Directed call park

    Hello All,
    After upgrading the voice gateway from 15.1(2)T2 to15.1(3)T4 im facing this issue.
    MOH is not working in Directed call park. We have 10 Directed call park numbers 100-109, users are parking the calls by pressing trasfer key (transfer key-->dial 100-->transfer key). The Music is stopped playing after the user presses the transfer key for the 2nd time. MOH is working fine in hold and call  park. I can see the MOH session in Show ccm-manager music-on-hold and the same MOH session is continuing after pressing the transfer for the 2nd time, only the music is stopping. There are some sites in the same cluster which MOH working in all conditons but the router is rnning with
    Using: 2900 series voice gateway with H.323, Centralized cluster.
    Assistace will be musch appricidated
    Thanks,
    Murali

    This issue has been identified as new BUG. Cisco is working on this.
    -M

  • Wintv 7 930 c not working with FME 3.2 Sound problems :

    Hi Guys my first post here, after 3 days with struggling i gave up,and come here for your expert tips.
    I bought a wintv 7 930 c hd tv card,working fine on my computer,but when i enter FMLE 3.2 and click start i get :
    "Unknown Error Occurred.  Device may be already in use or not working."
    I disabled stereo mix in my sound setting in recording and have only a option to use my hauppauge tv card as line in for sound, but thats impossible for me, and now FMLE 3.2 also freezes a lot and not responding, same is happening when i try using normal stream with manycams and a videofile,no sound ,but good stream, so its the sound problem i cant fix at all here .
    Any good tips would be very appreciate, heck i would even paypal you 20 bucks if you can help me with this .
    Thanks.

    Hello,thanks for your help, yes i understand that by now, i called support.
    So what do you suggest i do,so i can stream from my computer true my tv card and out,is there a 3 part i can use who handle this then use FMLE ?

Maybe you are looking for

  • I have apple tv, but I can not figure how to connect my macbook to airplay

    I want to learn how to use my macbook pro with apple tv.  I am not sure if there is something else I need to purchase to do this.  I would like to play a Powerpoint presentation on my television but can not do that. 

  • Module Chart component Error #1009: Cannot access a property or method of a null object reference

    Is there a known bug when displaying a chart component that is defined in a module. When attempting to display a chart component defined in a module it crashes indicating Error #1009: Cannot access a property or method of a null object reference. It

  • From 1.1.3 to 2.2...

    I have an original iphone with 1.1.3 version of the operating system. Can I go directly to 2.2???? Must I pass through all the other versions until reach 2.2 step by step??? Does the original iphone works good with this new opsys?? Thank you

  • [SOLVED] Lost mimetypes

    After last update (today), KDE has lost most of the file associations, and all files are displayed in the environment as text files. Searching through the forums do not just find out what the problem is. Does anyone ever thought something like this?

  • Error while logging in with user DB2 SID

    Hello, We have SAP ECC 6.0 EHP 5 on AIX and DB2. Every time we try to login with user db2<SID>,with the command "su - db2<SID>, It gives the following error. Setenv : Syntax error I have checked the environment variables for DB2 user as well. I do no