MOH not working in Directed call park

Hello All,
After upgrading the voice gateway from 15.1(2)T2 to15.1(3)T4 im facing this issue.
MOH is not working in Directed call park. We have 10 Directed call park numbers 100-109, users are parking the calls by pressing trasfer key (transfer key-->dial 100-->transfer key). The Music is stopped playing after the user presses the transfer key for the 2nd time. MOH is working fine in hold and call park. I can see the MOH session in Show ccm-manager music-on-hold and the same MOH session is continuing after pressing the transfer for the 2nd time, only the music is stopping. There are some sites in the same cluster which MOH working in all conditons but the router is rnning with
Using: 2900 series voice gateway with H.323, Centralized cluster.
Assistace will be musch appricidated
Thanks,
Murali

This issue has been identified as new BUG. Cisco is working on this.
-M

Similar Messages

Directed call park MOH

We have installed a multi-tenant solution. Two of the tenants use their own separate MOH audio sources for their devices. Both tenants would like directed call park numbers that need to be separate from each other. They would like their directed call parks to play their own music on hold audio source.
1. I can't seem to find a way to change the directed call park MOH without changing the default MOH settings in the service parameters. Is there another way to do this?
2. Is there a way to specify different MOH audio sources for different directed call park DNs?
3. The callmanagers are version 6.1.3. If there is no way to have different MOH for directed call parks in callmanager version 6 is there a way to do it in callmanager version 7?
Any help on this would be greatly appreciated.

This issue has been identified as new BUG. Cisco is working on this.
-M

Directed call park number recommendations

Hi,
This is more of a design question about numbering plans, but here it goes. I have configured our sites to use 4 digit internal numbers, and I have matched the call park numbers to the prefix of the internal numbers for each location. eg.
location A: 30xx
location B: 32xx
location C: 40xx
location D: 44xx
etc...
Directed call park numbers:
location A: 301, 302
location B: 321
location C: 401,402
location D: 441,442
This has worked fine up until people wanted to start parking calls on phones that do not have the blf directed call park button. The interdigit timeout now conflicts with my numbering plan, because 441, could be 4410 in location D. So people are trying to park calls by just transfering the call to 441, but they have to wait for the 10 second timout to occur before they can complete the transfer. I was thinking of just changing the call park numbers, but I would have to use a 4 digit number instead of a 3 digit number.
Dan.

I am having the same issue. The media resource group that is assigned to the gateway DOES include the Media Resource Group that includes the MoH server.
Anyone have any idea why else the external callers would here ringing?
Thanks.

IBM cognos TM1 Executive viewer is not working on direct Access

Hi,
We are implementing DirectAccess in our environment and testing applications in test lab. It has been observed that executive viewer is not working on Direct Access but working fine over VPN mobile checkpoint. When DA client click on open view button it
gives error
" Additional information:
Unable to connect to server XYZ.com using TCP-IP port 7112. Please make sure that IBM cognos TM1 executive viewer server is started and the port is not blocked by any proxy server or firewall"
but from client telnet is working on port 7112. All ports between DA server and application server are open 3389,7112 and 80.
Also select database option is grayed out and user is unable to select the database. When switching to VPN its working fine.
We are using Executive viewer 9.4.
Any help would be appreciated.

It sounds like this program may not be capable of talking over IPv6, which DirectAccess uses. First make sure that when you connect it is trying to talk to a hostname and not an IPv4 address. If your program is calling for "192.168.1.100" - this is never
going to work over DirectAccess. It must call for a name that DirectAccess can resolve to an IPv6 address for communication over DA.
If you confirm it is talking to a name, and then if you confirm that you can do other things to that same name (can you RDP into the server for example?), then that confirms that DirectAccess traffic flow is working to that name/server.
If RDP works but the application still doesn't work, then the application is probably incapable of IPv6. You can either ask IBM if they have a newer version that does talk IPv6, otherwise I have a utility available that can intercept packets from these kinds
of problematic applications and flip the packets into IPv6 on the DA client. Let me know if you need any further information on that: http://www.ivonetworks.com/news/2013/05/ivo-networks-announces-app46-for-directaccess/

Submit is not working in direct execution

Hi All,
I want to pass multiple values to the order number(select-options) in the selection screen,
and skip this first screen and should change these order values in the screen.
for this i am using submit statement,it is working in debug mode but not working in direct execution.
Could please any one tell me why it's happening like this.
Below is the code for submit if there is any wrong correct me.
          SUBMIT riaufk20 USING SELECTION-SCREEN '1000'
                                WITH SELECTION-TABLE lt_rsparams
                                WITH dy_tcode = lc_tcode
                                AND RETURN.
Thanks,
Suresh.

Hi Suresh,
Your question has been asked many times but there is no direct solution found till now.
Your one option is Copy the code from RIAUFK20 after event START-OF-SELECTION. and call it in your own program
Note that you will have to also declare the data(selection criteria and other tables) as well fill them in your program
Example.
RANGES: gr_date FOR sy-datum.
DATA: datuv TYPE i_termab,
      datub TYPE i_termbi.
PERFORM create_date_range_f67(riaufk20) TABLES gr_date
                                USING datuv datub.
Regards,
Jovito

FBVB error msg "Transaction not defined for direct call-up"

Dear Gurus,
Pls help me on issues below:-
1.)What is the diff between FBV0 and FBVB?
2.)When i try to initialize FBVB. I received an error "Transaction FBVB not defined for direct call-up. Can u teach me how to fix it up coz one of my end-user requested this T-code.
Thanks.

Nothing needs to be fixed - the transaction is called behind the scenes when the user uses FBV0 to post a parked document. Users should never call FBVB directly.
Andrew

ADS does not work.(Service call exception)

Hi All,
According to SAP note 937697 "Usage of SAP NetWeaver BI Diagnostics & Support Desk Tools", when running the tool, it gives following error:
ADS does not work.(Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://sapbwd.ni.ad.newsint:50000/AdobeDocumentServices/Config?style=document")
I have been looking into system to find out how to solve the issue, but could not, is there anyone who can help me with exact instructions what I do need to do.
Thanks in advance
sahmad

Dear Sahmad,
I would suggest you to check notes 1004321 and 944221. The first one says that mostly of this kind of issues (and I have already seen several ones) is caused for bad passwords for user ADSUSER or this account expired. The second note is a troubleshoot note you can also do.
You can also follow this procedure to check that:
Please open the Visual Administrator and browse to Server -> Services -> Security Provider -> Policy Configurations
In the Components tab you will see the service.destinations policy. Click on this and then click on the AccessDestinations security Role. Modify this and add the J2EE_ADMIN/Administrator user to this role and save.
Maybe the password is not set correctly as well. I think it worths to be set it again. First you have to identify where your ADSUSER maintained.
Go to http(s)://<SERVER>:<PORT>/useradmin search for ADSUSER If Datasource:
- LDAP -> check psw of ADSUSER in LDAP and enter it in SM59
- UME data -> check psw of ADSUSER in Visual Admin and enter it in SM59
- ABAP -> check psw of ADSUSER the ABAP system in the following client:
Visual Admin->UME Provider->Properties->ume.r3.connection.master.client
If you want, also, you can change the ADS by the SAP Export Library, as per SAP Note 1112132. It is very simple to activate and will bypass ADS, doing every function ADS does.
I hope it helps.
Kind Regards,
Marcio

Microphone of my iphone is not working when i call anyone nobody can listen but me, its working with headphone but its also working with videocam recording, please help me to solve this probelm.

microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.

Try this:
1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
3. If the issue persists, Your iPhone need repair.

FBVB not defined for direct call-up error

Hi All,
user are getting the message 'Transaction FBVB not defined for direct call-up' while running transaction FBVB .What does this mean.Even i am also getting the same error while running FBVB . Can somebody tell what does this error mean .
Thanks.
Chitta

Hey,
I hope you have got a reason for the message from sapfans & ittoolbox aswell.
Br,
sri

Microphone not working on a call when cellular data is on...any help..ty..

microphone not working on a call when cellular data is on...The person at the other end of the call cant hear me and when i turn it off it works fine..

Hi there ravitejanvr,
You may find the troubleshooting steps in the article below helpful.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
-Griff W.

I have a macbook air 13 inch, facetime is not working. i receive calls but its dosent connect. can someone please help?

i have a macbook air 13 inch, facetime is not working. i receive calls but its dosen't connect. i have already tried resetting it.i am running on 10.7.5.can someone please help?

I've checked this page over and over - I'm completely updated and I can answer the call on my ipad and iphone, just not my macbook air - any other suggestions? thanks in advance

Voicemail not working for incoming call

Incoming calls are sent to 6 phones simultaneously via a hunt group. One phone has voicemail set up but it only activates when called internally. The system is 9000/400 with spa941 phones.
The hunt group was set up using the wizard so it is my understanding that I need to set a call forward to activate after say, 12 seconds to that voicemail but I do not know the correct code/notation/language to invoke this outcome.
HELP!

If you transfer call directly to IPCC extension then agent state will be not ready . So ACW will not work in this senario .
Agent can go in ACW state only after talking state .

MOH not working in cucm only beep sound

HI,
I have an IP Telephony set up running on CUCM 9.1.Publisher and subscriber in a single site deployment model.
Customized MOH were configured and running fine before.Now users are complaining that MOH is not working(both internal and external calls) and only beep sound is hearing when putting on hold .
I have checked the MOH server is registered and I have restart the Cisco IP Voice Media Streaming App service for both pub and sub
But when i am selecting the Sample Audio source its working fine and I can hear the cisco sound on MOH.
I have added another audio source for testing and assigned to the phones but result is same.
Multi cast allowed on the Audio source and its enabled in the MOH server.
Attached the screen shot for MOH audio source and MOH server.
Please advice how to fix this issue.

Beep sound indicates configuration issues, few things to check:
Make sure the DP assigned to the MOH server is set to use G711 between other regions, unless you enabled other codecs in service parameters
Make sure the MOH file is uploaded to all servers
Make sure the MOH server is assigned to MRG/MRGL of the devices needing to connect to it (phones, GWs, etc).
Can you try using unicast vs. multicast to see if that fixes it?
Chris

Subvi does not work properly when called inside a vi

Hello Every body
thanks for your help. i am using a sub vi for sine signal generation. as a vi it works fine. but when i called this subvi inside another VI it gives some problems. for example timer indicator works properly.it reinitializes as well in the sub vi, but in the main VI it does not work properly. means does not count the time.in the sub vi on the fly i can change the values of frequency and amplitude in real time, but when i use as sub vi, it does not reponse as i change the values in the control arrays.similarly pause and continue works properly in the sub vi, but once again in the main VI, it does not work properly.graph indicator also work properly in the sub vi. but here once again it does not work properly in the main VI.the pause resume indicator also does not blink, when it is continue. in the subvi it blinks very well.generally why the sub vi does not work properly inside the VI?i am sending my VI and sub vis.
any tips would be highly appreciated.
thanks
Regards
Attachments:
vi.zip ‏87 KB

I just want to add some more details to Dan's answer. The subVI is acting exactly like you've coded it. The mistake is in understanding how subVIs work. When you call a subVI (or a function in any other language), you pass some parameters to it, the subVI does it's thing and returns values. the subVI does not accept new parameters from the calling VI until it returns to the caller and the caller runs the subVI again. In your case, you have a subVI with a while loop. You have some front panel control wired to the subVI's stop terminal. When first called, the value is false. So the subVI will keep running until the subVI's stop button becomes true but you cannot change it from main until the subVI finishes and returns so the subVI will never stop. As Dan says, the solution is pass references of front panel controls to the subVI and have the subVI monitor those references for changes and to update references to indicators on Main. You subVI does not need any front panel controls or indicators of it's own.

Action link not working in Direct db request(OBIEE 11g)

Hi all ,
My Requirement.. is...
From direct db request .. i need to navigate to detail report and it should be display the results(detail report results) based on the value,which user click's on the summary report.
For the above requirement ..
I have done below steps..
Summary report(Direct db request) columns:
   Diet no,diet name
   a.I have created a action link on diet no column.
Detail report columns:
   Diet No ,Diet Name,Material Name
   a. I have set diet no as is prompted
when i click on the diet no value in summary report ,we are able to navigate to detail report but it's not filtered based upon diet no value , which i have clicked in summary report.
It is displaying all results(detail report).
Note: if both are normal reports(not direct db request) it's working fine.
If one of the report is direct db request..Action link is not working properly.
Is it action link working in direct db request.........or not
If any one having any ideas pls share me ..
Regards,
Bharath

Hi,
It's known bug. this issue fixed in 11.1.1.7.0 (coming soon).
bug 13852263 - ACTION LINKS - NAVIGATION TO BI REPORTS DOESN'T WORK ( OPEN IN NEW WINDOW)
for now : to uncheck the "Open in New Window" checkbox and go to the detail report in the same Window.
Note: this bug has been fixed by applying the patch 14003822 (u need to get the latest patch)
Thanks
Deva
Edited by: Devarasu R on Feb 14, 2013 4:05 PM

MOH not working in Directed call park

Similar Messages

Maybe you are looking for