MOH Sources for 2 800 #'s for call manager

Hey all,
How would i go about configuring 2 MOH sources for 2 different 800 numbers coming into call manager?
Im stuck at trying to find the location in call manager where the 800 numbers are configured?
Where abouts would you be able to see what incoming pri configurations are in call manager or am i looking in the wrong place.
Bascially, i want to use a different MOH source file for a second 800 number.
Thank you everyone!

What you translate is dependent on what the telco is sending you and the value configured for Significant Digits in the gateway configuration. If the telco sends you 10 digits and the Significant Digits field is set to All, then you would translate the entire 800 number.
For Unity, you configure MOH using the device pool of the Unity ports. You can configure the device pool under System -> Device Pool and assign the device pool to the Unity ports under Feature -> Voicemail -> Cisco Voice Mail Port. So, to have 2 different MOH sources for your 800 numbers, you would have to have 2 device pools assigned to 2 sets of voicemail ports and ensure that the numbers get translated to a hunt pilot that uses the proper ports.
Brandon

Similar Messages

  • Help needed: Data source for Facilities management (tables VTB_ASGN*)?

    Hi all,
    I am looking for a data source for facilities management in R/3 (PI 2004_1_470)
    The tables are concerning VTB_ASGN* etc.
    every feedback is highly appreciated and rewarded.
    Thanks and regards,
    Sally

    Hello Sally,
    Did you ever find a solution to this issue?
    My client is also looking to do reporting on facilities in BW and integrate this data into liquidity planning in SEM-BPS. However, it looks like this will have to be a custom extractor calling one of the two function modules either FTR_FC_GET_COMMITMENT or FTR_FC_GET_COMM_DRAW_FEE.
    Gregory

  • What are all the Standard Data targets&Data source for Warehouse management

    Hi,
    What are all the Standard Data targets & Data source for Warehouse management.
    Thanks,
    Ahmed.

    HI,
    the master data
    1.equipment data --IE01
    2.All functional locatiions -IL01
    3.Maintainnace work centers - IR01
    4.Task list data - IA05
    4.Schedule maintanence plan
    6.Strategies
    7.Measuring points
    8.Characters for calibration
    9.Equipemnt BOM
    10.Material BOM
    Regards,
    Anddra

  • What are all the Standard Data targets&Data source for Transportation Manag

    Hi,
    What are all the Standard Data targets & Data source for Transportation Management.
    Thanks,
    Ahmed.

    HI,
    the master data
    1.equipment data --IE01
    2.All functional locatiions -IL01
    3.Maintainnace work centers - IR01
    4.Task list data - IA05
    4.Schedule maintanence plan
    6.Strategies
    7.Measuring points
    8.Characters for calibration
    9.Equipemnt BOM
    10.Material BOM
    Regards,
    Anddra

  • Phone License for Call Manager express

    Dears ,
    Is the phone license required for Call manager express or the license on the voice gateway enough for operating the phones ?
    Regards,

    Hi Ian,
    I think I may have given you some bad info here. Sorry about that
    Right to Use Feature Licenses
    The following licenses do not Cisco software activation and you can begin using the features upon receipt of the Right to Use Notification
    Feature License Name
    Prerequisites
    License Types
    CME
    IP Base & UC
    Feature (Counted)
    SRST
    IP Base & UC
    Feature (Counted)
    VXML Gateway
    IP Base & UC
    Feature (Counted)
    CUBE
    IP Base & UC
    Feature (Counted)
    Land Mobile Radio
    IP Base & UC
    Feature
    You should be good to go. But a quick note to
    [email protected]
    would be a fair idea.
    Cheers!
    Rob

  • Need to take MIB File for Call Manager

    Hi,
    Can anyone help me how to take MIB file for Call Manager. We have a cluster of 6 CUCM servers (1 pub + 5 Sub). we need this MIB file for monitoring purpose. If you need anyother information regarding this please let me know.

    Hi
    Below MIBs are supported in CUCM.  Refer the link attached for details. Btw which Version are you running ?
    •CISCO-CCM-MIB
    •CISCO-CCM-CAPABILITY
    •CISCO-CDP-MIB
    •CISCO-SYSLOG-MIB
    http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/managed_services/cisco_mibs.html
    Thanks.

  • Lost Drivers And Applicatio​ns Source For Recovery Manager

    Hello
    I have HP Pavillion DV6 6115tx laptop and accidently i deleted the Drivers And Applications Source For Recovery Manager from C:..
    Now I want to get that source back.
    Please Somebody help me.
    Product HP Pavillion DV6 6115tx 
    OS Windows 7 64Bit
    This question was solved.
    View Solution.

    The only way to get it back is to do a System Recovery either using your Recovery Disks or by tapping F11 key immediately after powering on the laptop.
    Or you can just download drivers and software from your model's page:
    http://h10025.www1.hp.com/ewfrf/wc/product?product​=5113657&cc=us&dlc=en&lc=en&query=DV6%206115tx&too​...=
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • 7975 firmware for call manager express

    i would like to add 7975 phone to call manager express.
    where do I get the firmware for 7975 for cme?
    i tried from software.cisco.com but it's for call manager only.

    Hi pranavluhar,
     check this link cme-153-3Mv2.rar (in 10.0 option).There is a 7975 version for CUCME.
    Hope this helps.

  • Config Archive for Call Manager

    Hello,
    It give me the attahced error fo r config archive for call manager.

    The supported devices page shows each supported device, and what features are supported:
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html

  • Funds Management as a budget source for Grants Management

    Hi:
    I have grant type whose budget source has been set as Funds Management and transfer to FM check box is also on. Now i have a fund center and commitment item which have been assigned to sponsored program and sponsored class master data respectively. I have created a grant with reference to these Sponsored program and sponsored class in initial draft phase. Now i want to post budget in FM and then automatically transfer it to GM as soon grant is awarded. I am following link http://help.sap.com/saphelp_erp60_sp/helpdata/en/3e/1b7e3cda04f678e10000000a11405a/content.htm .
    In FM i have posted a  budget (but did not release it) against an external fund, also against commitment items and fund centers which have been assigned to SC & SP respectively. Grant field is set as non relevant grant.
    Now my question is at what point in time budget will be will be updated in Grants management , How will the transfer from FM to GM happen ? Please guide me
    Regards

    Hi Shyamal:
    Please note that a DUMMY grant has been created in customizing Define "Not-relevant grant". I am following the process e.g
    1..1 have 3 Million Research & education budget for year 2012-13  and for a varying sponsored programs and a sponsored class linked with fund center and commitment items respectively
    2..Of these 3 Million i am expecting that i will receive 1 Million as grant .
    3..In FMBB i ENTER 3 Million budget against DUMMY Grant along with combination of fund,FC & CI.
    4.As soon an MOU is signed with Grantor and he releases amount 0.6 Million  for budget i create a Grant master ans set its status to award ..Grant number generated is XYZ
    5.Now i n FMBB, i try to release budget again this grant number but system is throwing error that budget amount is not sufficient for release for combination XYZ/FC/CI/Fund , system is true in saying so because earlier budget was entered and posted for DUMMY Grant and now i am trying to release it for Grant XYZ. System does not let me directly ENTER budget in FMBB against Grant XYZ and throws error "Grant XYZ can not be used to enter budget in FM".
    Please note that in Grant type budget source has been explicitly defined as "Funds Management"
    Regards

  • API for Call Manager Backup

    Hello All,
    Is there any API available to take the back up from Cisco Call Manager (ranging from the version of 4.0 up to 7.0). My aim is to develop an application either in .NET or Java to take the back up from the call manager and restore the same.
    I could get some information on Cisco Back up utilities. But for the automation purpose I am looking for using API in application so that it can be triggered at the desired time automatically.
    Thanks and regards,
    Ram

    Hi Ram,
    You may want to post this question under "IP Telephony" community. This is where call manager questions are posted.
    thanks,
    Hitesh

  • Open Source for Workflow Management

    Hello All,
    a colleague of mine told me that he heard about an open source tool for Workflow Management.
    Is it right that there is an open source product?
    I don't know any open source products in the world of SAP.
    Thanks a lot for your answers!

    Please check this link. I do not think so
    http://www.sdn.sap.com/irj/sdn/opensource-integration
    Thanks'
    Arghadip

  • Unfied Meetingplace for Call Manager Express??

    Hi! I was told that Meetingplace express is being End Of Life, can you tell me if I can install the recommended Unified MeetingPlace for a new Call Manager Express 8.0install? If so, can use a use a MC7825 server and licenses but what licenses?!?! I'm a little lost here...
    THANKS in advance

    can you tell me if I can install the recommended Unified MeetingPlace for a new Call Manager Express 8.0install?
    Yes with limitations per the SRND: http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/srnd/8x/confernc.html#wp1057454
    If so, can use a use a MC7825 server
    No. You need at least an MCS7835: http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_System_Requirements_for_Cisco_Unified_MeetingPlace_Release_8.0#Table:_Supported_Cisco_MCS_and_Third-Party_Equivalent_Servers_for_the_Application_Server
    licenses but what licenses?
    I hope you have UCSS coverage left on MPE. The problem is that MP8 and beyond are no longer stand-alone systems; they all require WebEx for the web conferencing. MP8 only provides audio/video conferencing. If you have a WebEx Node for MCS you also get an inside-the-firewall WebEx cloud attachment point for clients. A WebEx contract is required though. Remaining UCSS coverage should provide you that for free through the conclusion of the contract.
    Oh, and MP8 starts at 200 ports. Most MPE customers probably are a better fit for straight-up WebEx MC.
    http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Licenses_for_your_Cisco_Unified_MeetingPlace_System

  • Sources for Solaris Management Console, admintool, Process Manager

    Hello again after a long time! I'm interested in this sources (Solaris Management Console, admintool, Process Manager) especially admintool source code. I'm working on a Solaris8_x86. Are this sources delivered with the operating system and where can I find'em? If this sources are not delivered with the OS, the question remains. Where can I find'em and some help (man pages or anything) about these programs and their source code?

    Hi,
    as I know, there aren't any sources available for admintool. If you are interested in Management Console, than check docs.sun.com.
    Management Console is based on Jiro Technology as I remember. You can also check for CIM (Common Information Model) and WBEM (Web Based Enterprise Management).
    Start with the Management Console Manuals.
    Heiko

  • Acceptance Critria for Call Manager

    Dears
         I need a help for a template for acceptance critria for all function can be tested throgh the call manager

    The supported devices page shows each supported device, and what features are supported:
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html

Maybe you are looking for