MOM Setup key could not be opened

I'm having problems deploying SCOM 2012 SP1 Agents to a 2008 R2 Server. below ports are open. I pushed the agent install to the target server and the momagentservice installed and is running as well as the files for the install are pushed but
the Agent does not automaticlly install. The only error message I see is MOM is unable to open Key in the momagentmangemnt.log
Any help would be appricated. Thank you
12:18:59 PM : CServiceModule::Init : m_bService is set to true. HResult: 0
12:18:59 PM : CServiceModule::Start : Service flag is set
12:18:59 PM : CServiceModule::SetServiceStatus : State: 2, Error: 0
12:18:59 PM : CServiceModule::SetServiceStatus : State: 2, Error: 0
12:19:00 PM : IsCurrentMOMServerInstalled : MOM Setup key could not be opened.
12:19:00 PM : CServiceModule::_RegisterFile : Before LoadLibrary
12:19:00 PM : CServiceModule::_RegisterFile : After LoadLibrary
12:19:00 PM : CServiceModule::_RegisterFile : Before GetProcAddress
12:19:00 PM : CServiceModule::_RegisterFile : After GetProcAddress
12:19:00 PM : CServiceModule::_RegisterFile : After FreeLibrary
12:19:00 PM : CServiceModule::RegisterFile : Success return
12:19:00 PM : CServiceModule::RegisterFile : WaitForSingleObject return HResult: 0
12:19:00 PM : CServiceModule::SetServiceStatus : State: 4, Error: 0
01:22:40 PM : CServiceModule::SetServiceStatus : State: 3, Error: 0
01:22:40 PM : CServiceModule::SetServiceStatus : State: 3, Error: 0
01:22:41 PM : IsCurrentMOMServerInstalled : MOM Setup key could not be opened.
01:22:41 PM : CServiceModule::_RegisterFile : Before LoadLibrary
01:22:41 PM : CServiceModule::_RegisterFile : After LoadLibrary
01:22:41 PM : CServiceModule::_RegisterFile : Before GetProcAddress
01:22:41 PM : CServiceModule::_RegisterFile : After GetProcAddress
01:22:41 PM : CServiceModule::_RegisterFile : After FreeLibrary
01:22:41 PM : CServiceModule::RegisterFile : Success return
01:22:41 PM : CServiceModule::RegisterFile : WaitForSingleObject return HResult: 0
01:22:41 PM : CServiceModule::SetServiceStatus : State: 1, Error: 0
Source
Dest
              Protocol
Port
SCOM
         Target Server                       TCP/UDP
135
SCOM
Target Server                       UDP
137
SCOM
Target Server                       UDP
138
SCOM
Target Server                       TCP
                              139
SCOM
Target Server                       TCP
445
SCOM
Target Server                       TCP
                              5723
Target
SCOM
TCP
5723
Target
SCOM
TCP
51906
Target
SCOM
TCP
51909

Hi,
I recommend you disable firewall and antivirus on the server and install the agent again.
Also, I recommend you to post it at SCOM forum for further help:
System Center - Operations Manager forums
http://social.technet.microsoft.com/Forums/en-US/home?category=systemcenteroperationsmanager
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

When trying to install Photoshop Elements 12 - error message "Key could not be opened"

Error message is in German as I live in Austria.
I have tried a lot of time to install a recently bought packagee "Photoshop Elements 12 & Premiere Elements 12" - but without success. When istalling PSE 12 I always receive the following error message (text in German):
Installation stoped and then ran back to zero - so after all no changes were made.
However, what can I do that this error doesn´t occur anymore?
Any suggestions would be appreciated very much!
OS: Windows 7 Professional (SP1)
Kind regards
G.

*kb.mozillazine.org/Unable_to_save_or_download_files
*https://support.mozilla.org/en-US/kb/cant-download-or-save-files

Itunes does not open,everytime i try it says "The itunes application could not be opened. The required folder cannot be found" I have tried the shift key option but that does not work. help!!

I cannot open itunes. Everytime i try it says "The itunes application could not be opened.The folder cannot be found." I have tried the shift key option but this does not work. Please help.!!

Try the actions here for that driver.
iOS: Device not recognized in iTunes for Windows
I would first do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

HT202879 i am unable to save documents in keynote or pages. The file "untitled.key.tef" could not be opened keeps coming up.

i am unable to save documents in keynote 09 or pages. The file "untitled.key.tef" could not be opened keeps coming up. Can anyone tell me what is happening?

How did you originally make these documents?

Will not export photo. pop up says Some export operations were not performed. This file could not be opened(1). Also when I try to add a key word to ohoto the screen keyboard opens and I do not have a touch screen monitor.I have uninstalled LR6 and re-ins

will not export photo. pop up says Some export operations were not performed. This file could not be opened(1). Also when I try to add a key word to photo
the screen keyboard opens and I do not have a touch screen monitor.I have uninstalled LR6 and re-installed and it still does the same thing??????

<moved from Downloading, Installing, Setting Up to Photoshop Lightroom>

I cant install java or itunes installation package could not be opened verify that the package exists and that you can access it or contact the application vendor to verify that this is a valid Windows package installler

installation package could not be opened verify that the package exists and that you can access it or contact the application vendor to verify that this is a valid Windows package installler what can i do ? help me

Hi,
Firstly make sure you save it to your hard disk, and then run setup from there.
If it doesn't help, you may also try to unregister Windows Installer, and then reregister Windows Installer and check if it helps. To do this, follow these steps:
1. Press Windows Key + R
2. In the "run" box, type "msiexec /unreg", and then press ENTER.
3. Press Windows Key + R
4. In the "run" box, type "msiexec /regserver", and then press ENTER.
Besides that, You could try to create a new user to download and install the application.
Karen Hu
TechNet Community Support

Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.

html,body{padding:0;margin:0;font-family:Verdana,Geneva,sans-serif;background:#fff;}html{font-size:100%}body{font-size:.75em;line-height:1.5;padding-top:1px;margin-top:-1px;}h1{font-size:2em;margin:.67em 0}h2{font-size:1.5em}h3{font-size:1.16em}h4{font-size:1em}h5{font-size:.83em}h6{font-size:.7em}p{margin:0
0 1em;padding:0 .2em}.t-marker{display:none;}.t-paste-container{;left:-10000px;width:1px;height:1px;overflow:hidden}ul,ol{padding-left:2.5em}a{color:#00a}code, pre{font-size:1.23em}
I get this message on two different machines installing SQL2014 developer edition, a Windows 7 and a Windows 8 machine. Both machines have SQL2005 through SQL2012 developer machines installed and working great. I have tried uninstalling all SQL2014 stuff and
installing again making sure I was running as an Administrator to no avail.
How do I look at sys.key_encryptionswhen the server will not start to finish installation?
The links in the log only provide the "We're Sorry" message.
This is the first error dialog info
TITLE: Microsoft SQL Server 2014 Setup
The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254026
The SQL Server error log has the message in the title.
2014-04-04 17:02:17.49 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-04-04 17:02:17.49 Server UTC adjustment: -4:00
2014-04-04 17:02:17.49 Server (c) Microsoft Corporation.
2014-04-04 17:02:17.49 Server All rights reserved.
2014-04-04 17:02:17.49 Server Serverprocess ID is 9236.
2014-04-04 17:02:17.49 Server System Manufacturer: 'Hewlett-Packard', System Model: 'HP EliteBook8760w'.
2014-04-04 17:02:17.49 Server Authentication mode is MIXED.
2014-04-04 17:02:17.49 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG'.
2014-04-04 17:02:17.49 Server The service account is 'NT Service\MSSQL$SQL2014'. This is an informational message; no user action is required.
2014-04-04 17:02:17.49 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\mastlog.ldf
2014-04-04 17:02:17.49 Server Command Line Startup Parameters:
-s "SQL2014"
-m "SqlSetup"
-Q
-q "SQL_Latin1_General_CP1_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-04 17:02:17.79 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-04 17:02:17.79 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-04 17:02:17.79 Server Detected 8142 MB of RAM. This is an informational message; no user action is required.
2014-04-04 17:02:17.80 Server Using conventional memory in the memory manager.
2014-04-04 17:02:17.92 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english1033)
2014-04-04 17:02:17.95 Server Perfmoncounters for resource governor pools and groups failed to initialize and are disabled.
2014-04-04 17:02:17.96 Server Query Store settings initialized with enabled = 1,
2014-04-04 17:02:17.97 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-04 17:02:17.97 Server This instance of SQL Server last reported using a process ID of 8760 at 4/4/2014 5:02:08 PM (local) 4/4/2014 9:02:08 PM (UTC). This is an informational message only; no user action is required.
2014-04-04 17:02:17.97 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-04 17:02:17.97 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-04 17:02:18.00 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-04 17:02:18.00 spid7s Warning ******************
2014-04-04 17:02:18.00 spid7s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-04 17:02:18.01 spid7s Starting up database 'master'.
2014-04-04 17:02:18.02 Server Software Usage Metrics is disabled.
2014-04-04 17:02:18.07 Server CLR version v4.0.30319 loaded.
2014-04-04 17:02:18.11 spid7s 8 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.24 spid7s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.25 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2014-04-04 17:02:18.26 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-04 17:02:18.34 spid7s Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
2014-04-04 17:02:18.40 spid7s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.40 spid7s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.44 spid7s SQL Trace ID 1 was started by login "sa".
2014-04-04 17:02:18.44 spid7s Server name is 'TOMGROSZKO-HP\SQL2014'. This is an informational message only. No user action is required.
2014-04-04 17:02:18.46 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s Initializing the FallBackcertificate failed with error code: 1, state: 20, error number: 0.
2014-04-04 17:02:18.46 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-04 17:02:18.46 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-04 17:02:18.46 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s SQL Server could not spawn FRunCommunicationsManagerthread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
And a copy of the install log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-04-04 16:23:39
End time: 2014-04-04 17:06:25
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: TOMGROSZKO-HP
Machine processor count: 8
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2005 SQL2005 MSSQL.1 Database Engine Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SQL Server Replication
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 Full-Text and Semantic Extractions for Search 1033
Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SharedTools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.2 Analysis Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.3 Reporting Services - Native
1033 Developer Edition (64-bit) 9.00.1399.06 No Yes
SQL Server 2005 DTS
1033 Developer Edition (64-bit) 9.4.5069 No
Yes
SQL Server 2005 Tools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient\Connectivity
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\BOL
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\Samples
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 NS
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Database Engine Services 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 SQL Server Replication 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Full-Text and Semantic Extractions for Search 1033 Developer
Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSAS10_50.SQL2008R2 Analysis Services 1033
Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSRS10_50.SQL2008R2 Reporting Services - Native 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Basic
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Complete
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Connectivity
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Backwards Compatibility
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools SDK
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Integration Services
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Database Engine Services 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 SQL Server Replication 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Full-Text and Semantic Extractions for Search 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Data Quality Services 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSAS11.SQL2012 Analysis Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSRS11.SQL2012 Reporting Services - Native 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Basic
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Complete
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools SDK
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 BIDS
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL Server Data Tools - Business
Intelligence for Visual Studio 2012 1033 11.1.3402.0 No Yes
SQL Server 2012 Integration Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3128.0 No Yes
SQL Server 2012 Master Data Services
1033 Developer Edition 11.1.3000.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Downloads\SQL2014\SQL\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SQL2014
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.SQL2014\OLAP\Config
ASDATADIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASLOGDIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSOLAP$SQL2014
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
ASTEMPDIR: C:\SQLData\MSSQL\SQL2014\OLAP
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, MDS
FILESTREAMLEVEL: 3
FILESTREAMSHARENAME: SQL2014
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQL2014
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQL2014
INSTANCENAME: SQL2014
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer$SQL2014
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQL2014
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
SQLTEMPDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: Documentation Components
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\SystemConfigurationCheck_Report.htm
Any suggestions for what step to take next will be appreciated.
Thanks
Tom G.

Hi Tom,
Sorry for the delay. We can exclude the media factor since you were able to install it on VM with this media.
If I understand correctly, Shanky said “Abve message can also appear due to corrupt profile so deleteting old profile and creating new one and using this to install would also help.Make sure you always RK on setup.exe and select run as administrator” which
means your user account may be corrupted rather than the Virtual account. You can create a new Windows user account and use it to log into the system. Then, re-try the installation.
Additional information:
http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows-8
Thanks.
Tracy Cai
TechNet Community Support

HT5030 whem installing itunes i get this message "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"

whem installing itunes on my mums new computer which is windows 7 i get this message everytime "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"

Let's check your Windows system.
1. Have you done all the important windows updates and service Packs on your system. If not do it now. START button, type in Windows Update and ENTER. Select 'CHECK FOR UPDATES'
2. Let's check your Windows system files for possible file corruption
SCAN and repair possible Windows system file corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
3. Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

When i try to instal itunes on pc i get this message. This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack. HELP

when i try to instal itunes on pc i get this message. This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack. PLEASE HELP

Hello annesmith1954,
Thank you for using Apple Support Communities.
You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC.
"Could not open key" message when installing iTunes or Apple components for Windows
Regards,
Jeff D.

When i try to install iTunes onto my new computer, it says ""installation pkg could not be opened. Verify that this pkg exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer pkg."

When I try to install iTunes onto my new computer, it says "This installation package could not be opened. Verify that this package exists and that you can access it or contact the application vendor to verify to verify that this is a valid Windows Installer package." I can save iTunes onto my computer, but when I click run, this is the message that appears. How do I get this thing installed?

Hello annesmith1954,
Thank you for using Apple Support Communities.
You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC.
"Could not open key" message when installing iTunes or Apple components for Windows
Regards,
Jeff D.

This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." How to fix this installation error?

Does anyone know, how to fix ' This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." ?

At what point in the process are you getting this message? Have you tried downloading a fresh copy of the iTunes setup file from http://www.apple.com/itunes/download/ ?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Installation package could not be opened

can't download itunes as of 3/30/07.
my ipod6 was stolen. bought another from apple. now can't download. "this installation package could not be opened"
following "solutions" have not worked
-1)start/control panel/quicktime/audio/devices/de-select safe mode
-2)start/control panel/sounds and audio devices/volume/speaker setup/stereo headphones
-3)COMPLETELY REMOVE ITUNES AND QUICKTIMES
RESULT: Fine until Step 15. Cannot remove the C/Program Files/QuickTime folder.
It reads "CANNOT DELETE QTTQSK.EXE. ACCESS IS DENIED.
Attempted to remove it several times in several different ways all unsuccessful.
PROBLEM STEP 16 - There was no QuicktimeVR in C|windows\system32 folder
-4)EMPTY TEMP DIRECTORY AND RESTART
RESULT: Same error message as before THE INSTALLATION PACKAGE COULD NOT BE OPENED
-5)CLEAN UP ITUNES INSTALLER FILES ON THE COMPUTER
PROBLEM step 5: SELECT ITUNES FROM LIST. itunes is not on the list.
Elasped time about 4 hours.
Any help would be appreciated. I'm not real smart about computers. I only have a masters degree. Seriously I can handle mechanical or even electro-mechanical. But I'm no good at this.
Thanks in advance for your help
dell wind up Windows XP

I ran into a similar problem, so will share what worked for me.
I didn't bother with safe mode. Just went to control panel, selected add/remove programs, and deleted itunes and Quicktime.
After deletion, I noticed the Quicktime player icon was still on my desktop, so I explored over to the program files folder and found the Quicktime folder still there with a ton of files in it. Upon attempting to manually delete this folder, I got the same message as you.
I rebooted the computer. Then I found the icon for quicktime in my taskbar at the bottom right of my screen, right clicked on it, and clicked on "Exit". That got rid of Quicktime from my task bar. Then used explorer again to get to the Quicktime folder in my program files directory, right clicked on Quicktime, clicked Delete, and it worked. Then I rebooted.
Upon logging back in, I installed Quicktime only. 2nd choice on this page. http://www.apple.com/quicktime/download/win.html
Then I rebooted.
Upon logging back in, I installed itunes only. See this page...
http://www.apple.com/itunes/download/
Rebooted.
Upon logging back in, both programs worked.
Good luck -CC

Itunes application could not be opened. an unknown error occurred (13010)

Using iTunes 8.
Get this error when i try to open iTunes...itunes application could not be opened. an unknown error occurred (13010)
It just shows that it tries to run in the Processes tab in the Task Manager. I get the error then the pocesses stops.
I've followed all the instructions in the attached link but with no luck:
http://support.apple.com/kb/TS1421
I created a new user account and iTunes opens fine...
Can anyone help.??

I too am having the same problem. I have followed the above advice - I followed this advice http://support.apple.com/kb/TS1421 to no avail. For what it's worth, It appears to be isolated to my user account. I also tried uninstalling and deleting all apple software including the itunes folder in my music folder plus deleting the registry keys before reinstalling. I also tried to move th Genius files onto my desktop as per the above suggestions. Any advice?

BCDEDIT.EXE /CREATESTORE causes error the boot configuration store could not be opened

I'm upgrading XP to Windows 7 with dual boot using an image and successfully installed on 6 other computers, the last two are failing when I issue the command:
bcdedit.exe /createstore
The boot configuration data store could not be opened.
The requested system device cannot be found.
I'm using a known good WINPE 4.0 (Windows 8) x64 USB boot environment, so most solutions that state to run elevated as an administrator do not apply.
C: is NTFS active partition, chkdsk doesn't find any errors on C:
I've updated the bootsector with the command
bootsect /nt60 c: /force /mbr
this of course disables booting into XP, but I can reboot and re-enable XP via
bootsect /nt52 c: /force /mbr
If I try a modified command
bcdedit.exe /createstore c:\BOOT\BCD
this also fails, and I've verified that the hidden system C:\BOOT folder does not exist before issuing the command
If I pre-create c:\BOOT (w/o hidden or system attributes) the command
bcdedit.exe /createstore c:\BOOT\BCD
does run successfully, but the following commands to add the Windows 7 boot entries and legacy NTLDR for XP dual boot still fail!
bcdboot.exe d:\windows /s c: /v
bcdedit.exe /create {ntldr} /d "Windows XP SP3"
bcdedit.exe /set {ntldr} device partition=C:
bcdedit.exe /set {ntldr} path \ntldr
bcdedit.exe /displayorder {ntldr} /addfirst
bcdedit.exe /default {ntldr}
bcdedit.exe /timeout 5
The two failing computers are older Dell OptiPlex 960 models, so I'm using traditional BIOS boot, EFI is not supported on these models. Hard drives are regular SATA (1 per computer), no other mass storage devices present besides DVD (empty), and hard
drives are not GPT formatted. Drives are old enough that they are regular 512 sector devices (no 512 emulation or 4K issues).

Thanks for your response Niki Han, the current status is the computers are booting correctly into the original XP SP3, since I've started them with my WINPE
4.0 x64 USB flash drive and issued the command to restore the original NTLDR boot process "bootsect /nt52 c: /force /mbr".
I also verified that there are no hidden partitions, and that there is only one active partition, C: which is a standard NTFS volume:
Partition 1
Type : 07
Hidden: No
Active: Yes
I've also verified that the BIOS is the same and the hard drive mode set in the BIOS is the autodetect RAID in both the working and non-working systems. I'll review the article you provided at
http://technet.microsoft.com/en-us/library/ee829686(v=ws.10).aspx#BKMK_Step4
which may allow me to get these two systems dual booting. I do know that I'll need to delete the corrupted hidden system c:\Boot folder to avoid any issues.
I do want to figure out why the command
bcdedit.exe /createstore
is outputting this error on just these two systems:
The boot configuration data store could not be opened.
The requested system device cannot be found.
What exactly does bcdedit.exe do when given the /createstore command, does it create a new empty store from the exe itself, or does it copy a store from the running system? I think the key to figure this out is understanding what the error "The
requested system device cannot be found." is trying to tell us.

IPhoto The library could not be opened because the file system of the library's volume is unsupported.

Have Yosemite installed on both my MBA and Mac Pro. iPhoto 9.0 running well on the MBA but when I tried opening iPhoto on my Mac pro get the message "The library could not be opened because the file system of the library's volume is unsupported." This is after I upgraded iPhoto.
Any help would be greatly appreciated.

While holding down the command & option keys boot into iPhoto and have it repair the Library. If that does not work then download "Library Manager" and have that program work. I found that better than the Apple program.

MOM Setup key could not be opened

Similar Messages

Maybe you are looking for