Mon Bluetooth ne fonctionne plus!
Mon Bluetooth ne fonctionne plus, comment faire?
Please try generic maintenance that others have reported success with:
Restart in Recovery mode and use Disk Utility to repair the hard drive, and repair permissions.
OS X: About OS X Recovery
(Please - don't reinstall OS X now - I just want you to read the 1st paragraph about getting into Recovery mode)
If that doesn't help, Reset the Printing System (and re-Add the printer in Print & Scan prefs)
OS X Mavericks: Reset the printing system
Similar Messages
-
Wi fi et Bluetooth ne fonctionne plus sur iPhone 4S avec la version 7.0
Comment remettre la version 6.0 parce qu avec la version 7.0 la wi fi et le Bluetooth ne fonctionne plus
Iphone non garantieDepuis que j'ai installé le version 6.1.2, je bouffe 30 à 40% de batterie dans la nuit alors qu'avant mon iphone 5 consommait 1% la nuit.
Je ne sais pas si on peut revenir en arrière. J'espère qu'il va y avoir une solution. -
j'ai telecharger une mise de iso a partie de mon itune depuis l'ors mon iphone ne fonctionne plus un signe sur l'ecran me dit de connecter mon iphone a itune quand je fait cela on me dit de faire une retauration quand je fait la restauration sa bloque et sa met erreur 1015 aider moi
Check this support document http://support.apple.com/kb/ts3694
The 1015 error is usually because of an attempt to download and downgrade the iOS version on the phone. Has the device been jailbroken? Had you tried to install a different iOS version on the phone? -
Mon ipad ne fonctionne plus pourquoi
Mon ipad ne fonctionne plus est-ce que c'est la batterieÉ
If there is a voice talking when you try to enter your PIN, it sounds like you may have VoiceOver enabled, which changes how you interact with the device. VoiceOver is used by blind users to give feedback about what they're touching on the screen.
This knowledge base article may help you to disable VoiceOver: http://support.apple.com/kb/ht4064
Otherwise you may need to learn how to use VoiceOver to enter your PIN, then launch Settings, then disable VoiceOver once again.
Translation using translate.google.com:
Si il ya une voix parler quand vous essayez d'entrer votre code PIN, il semble que vous pouvez avoir VoiceOver est activé, ce qui change la façon dont vous interagissez avec l'appareil. VoiceOver est utilisé par des personnes aveugles ou améliorer les informations sur ce qu'ils touchent à l'écran.
Cet article de la base de connaissances peut vous aider à désactiver VoiceOver: http://support.apple.com/kb/ht4064
Sinon, vous devrez peut-être apprendre à utiliser VoiceOver pour entrer votre code PIN, puis lancer Paramètres, puis désactiver VoiceOver une fois de plus. -
Mon vibreur ne fonctionne plus,
Bonjour, depuis hier soir mon vibreur ne fonctionne plus sur mon ihpone 4s (lorsque je le branche pour le mettre en charge, en silencieux, et en mode normal) que faire ?
Please try generic maintenance that others have reported success with:
Restart in Recovery mode and use Disk Utility to repair the hard drive, and repair permissions.
OS X: About OS X Recovery
(Please - don't reinstall OS X now - I just want you to read the 1st paragraph about getting into Recovery mode)
If that doesn't help, Reset the Printing System (and re-Add the printer in Print & Scan prefs)
OS X Mavericks: Reset the printing system -
Mon appareil photo fonctionne plus sur mon ipad mini
Bonjour, voilà j'ai un ipad mini depuis peu et mon appareil photo ne fonctionne plus auriez vous une solution relative a ce problème ?
Essaie un hard reset (appuies sur le bouton home et le bouton d'allumage en même temps pendant au moins 10-15 secondes, jusqu'à ce que l'ipad redemarre.
Si pas, essaie de quitter l'application en appuyant deux fois sur le bouton home. Ensuite, tu pressés longtemps sur l'icône caméra qui vient dapparaitre dans la barre en bas, et quand tu vois apparaître les petits sens iinterdits, appuies sur celui de l'application caméra. -
La fonction tactile de mon ipad ne fonctionne plus,
Bonjour,
La fonction tactile de mon IPAD 2 ne fonctionne plus.
Je ne peux pas rentrer mon code PIN et ne peux me connecter sur ITUNES
J'ai essayé d'eteindre les deux boutons, mais il se rallume avec le même écran
d'autre part, la fonction vocale est activée alors que je ne sais meme pas comment 4
la mettre en route.
J'ai téléchargé 15 jours avant qu'il ne tombe en panne la dernière version IOS 7.0.3.
HELP ME PLEASEIf there is a voice talking when you try to enter your PIN, it sounds like you may have VoiceOver enabled, which changes how you interact with the device. VoiceOver is used by blind users to give feedback about what they're touching on the screen.
This knowledge base article may help you to disable VoiceOver: http://support.apple.com/kb/ht4064
Otherwise you may need to learn how to use VoiceOver to enter your PIN, then launch Settings, then disable VoiceOver once again.
Translation using translate.google.com:
Si il ya une voix parler quand vous essayez d'entrer votre code PIN, il semble que vous pouvez avoir VoiceOver est activé, ce qui change la façon dont vous interagissez avec l'appareil. VoiceOver est utilisé par des personnes aveugles ou améliorer les informations sur ce qu'ils touchent à l'écran.
Cet article de la base de connaissances peut vous aider à désactiver VoiceOver: http://support.apple.com/kb/ht4064
Sinon, vous devrez peut-être apprendre à utiliser VoiceOver pour entrer votre code PIN, puis lancer Paramètres, puis désactiver VoiceOver une fois de plus. -
HT201556 mon safari ne fonctionne plus, il reste bloqué ?
Mon safari reste bloqué, il ne fonctionne plus et ne s'ouvre plus ?
Que faire ?Genieo Adware is installed. Removing it will help.
If you have another browser:
Use free AdwareMedic by clicking “Download ” from here
http://www.adwaremedic.com/index.php
Install , open, and run it by clicking “Scan for Adware” button to remove adware.
Once done, quit AdwareMedic by clicking AdwareMedic in the menu bar and selecting
“Quit AdwareMedic”.
or
If you don’t have another browser:
Use another Mac or an iPad.
Open the article,either print it or email the contents to yourself.
Remove adware manually by following the “HowTo” from Apple.
“Remove Genieo, also known as InstallMac”
http://support.apple.com/en-us/HT203987
Safari > Preferences > Extensions
Turn those off and relaunch Safari to test.
Turn those on one by one and test. -
Mon imprimante ne fonctionne plus depuis la dernière mise à jour
mon imprimante (hp laserjet 3052) ne fonctionne plus depuis la dernière mise à jour du 15 octobre 2014
Please try generic maintenance that others have reported success with:
Restart in Recovery mode and use Disk Utility to repair the hard drive, and repair permissions.
OS X: About OS X Recovery
(Please - don't reinstall OS X now - I just want you to read the 1st paragraph about getting into Recovery mode)
If that doesn't help, Reset the Printing System (and re-Add the printer in Print & Scan prefs)
OS X Mavericks: Reset the printing system -
Canon MP600, mon scanner ne fonctionne plus sous Maverick
Je possède une imprimante multifonctions : Canon MP600 : dont la fonction scanner depuis la mise à jour vers Maverick ne fonctionne plus, l'imprimante fonctionne toujours.
Sur le site de Canon je n'ai pas trouvé de driver résolvant le problème
CordialementNous avons déjà parlé de ce sujet et j'ai tout réinstallé et ça fonctionne en partie mais tu verras que certaines fonctions d'impression ne fonctionne plus : le recto-verso avec certain logiciel (pas tous). Par exemple, essayes d'imprimer dans "note". Tu verras qu'il y a des fonctions barrées et il est indiqué cela : "cette extension de zone de dialogue d'impression n'a pas pu être chargée car elle n'a pas été mise à jour pour s'exécuter dans l'environnement sécurisée de cette application ; contacter le fournisseur de l'imprimante indiqué ici pour obtenir une version à jour". Bizarrement, je n'ai pas de problème avec Safari pour imprimer en recto verso mais je ne peux pas le faire avec "Aperçu" ou "contacts". Je te laisse regarder, tu verras.
Quant au bouton commandable qui se trouvent sur l'imprimante, ils ne fonctionnent pas tous (les 2 gros ronds en bas et à droite) ne permettent plus de scanner directement en les choississant (couleur ou noir et blanc). Il faut obligatoirement ouvrir le navigator MP pour scanner. Dommage !
Bonne soirée,
Philippe -
La fonction numérisati​on de mon imprimante ne fonctionne plus
Bonjour,
J'ai acheté en 2005 une imprimante HP 2575 Tout-en-un.
Depuis quelques jours, lorsque j'appuie sur le bouton de numérisation puis sur OK pour sélectionner l'ordinateur, une fenêtre s'ouvre avec le message suivant : "Pas d'option de numérisation. Consultez la documentaton livrée avec le périphérique pour dépannage".
Je ne peux plus utiliser le CD d'installation car il ne marche pas avec windows 8 (il y a q jours la numérisation fonctionnait avec windows 8).
Pour info, mon ordi est un hp G7-2360SF.
Merci de votre aide !
This question was solved.
View Solution.Hi, nathr87
Welcome to the English HP Consumer Forums!
If you prefer to post your question in your preferred language, please visit this link: Contacter HP.
Thank you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Après la mise à jour IOS6 mon iphone ne fonctionne plus du tout
Bonjour,
j'ai voulu effectuer la mise à jour IOS6 comme demander par mon iphone 3 GS et depuis plus rien.. la pomme s'affiche puis disparaît...impossible de le réinitialisé ou le redémarrer...comment faire?Please try generic maintenance that others have reported success with:
Restart in Recovery mode and use Disk Utility to repair the hard drive, and repair permissions.
OS X: About OS X Recovery
(Please - don't reinstall OS X now - I just want you to read the 1st paragraph about getting into Recovery mode)
If that doesn't help, Reset the Printing System (and re-Add the printer in Print & Scan prefs)
OS X Mavericks: Reset the printing system -
L'appareil photo de mon IPad ne fonctionne plus.
Le capteur permettant de photographier ne s'ouvre pas , par contre le capteur côté autoportrait fonctionne.
Merci de m'aider à solutionner le problème.Google translation.
The touch screen of my iPad is not responding; impossible to slide to unlock. I turned it off to reset it. But it changed nothing.
What can I do?
Try a reset. Press and hold both the home and power buttons 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own. -
La webcam de mon mac ne fonctionne plus
Ni avec skype ni face time : ai-je fait une fausse manoeuvre ou problème technique?
If there is a voice talking when you try to enter your PIN, it sounds like you may have VoiceOver enabled, which changes how you interact with the device. VoiceOver is used by blind users to give feedback about what they're touching on the screen.
This knowledge base article may help you to disable VoiceOver: http://support.apple.com/kb/ht4064
Otherwise you may need to learn how to use VoiceOver to enter your PIN, then launch Settings, then disable VoiceOver once again.
Translation using translate.google.com:
Si il ya une voix parler quand vous essayez d'entrer votre code PIN, il semble que vous pouvez avoir VoiceOver est activé, ce qui change la façon dont vous interagissez avec l'appareil. VoiceOver est utilisé par des personnes aveugles ou améliorer les informations sur ce qu'ils touchent à l'écran.
Cet article de la base de connaissances peut vous aider à désactiver VoiceOver: http://support.apple.com/kb/ht4064
Sinon, vous devrez peut-être apprendre à utiliser VoiceOver pour entrer votre code PIN, puis lancer Paramètres, puis désactiver VoiceOver une fois de plus. -
Mon facebook ne fonctionne plus
j ai mis a jour mon ipad ce matin et depuis mon facebook n'ouvre plus
Please try generic maintenance that others have reported success with:
Restart in Recovery mode and use Disk Utility to repair the hard drive, and repair permissions.
OS X: About OS X Recovery
(Please - don't reinstall OS X now - I just want you to read the 1st paragraph about getting into Recovery mode)
If that doesn't help, Reset the Printing System (and re-Add the printer in Print & Scan prefs)
OS X Mavericks: Reset the printing system
Maybe you are looking for
-
I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and the
-
Help regarding BI Authorization
Hi Experts, I am working for first time on BI analysis authorization and I am having below queries to be clarified. Can you all please clarify my queries and help me. 1. In the project, we will not use HR and will therefore have to do local maintenan
-
How do I rotate numbers in a circle and keep them up right like numbers on a clock face.
Please can someone help me with my question.
-
Restriction for Migo if import custom miro is not done.
Dear Consultant , I want to put restriction over migo for import PO. If the custom duty miro is not done , it should not allow /restrict user for migo. Kidnly suggest user exit or badi or any other solution for the same. Thanx Pradeep
-
Issue in SAP_XI_IDOC/IDOCXmlToFlatConvertor
hi, i am working with IDOCXmlToFlatConvertor to convert my IDOC to Flat file. i am expecting the data as below with EDIDC40 EDI_DC40 Z_EC_ENQUIRY_CREATION Z_EC_ENQUIRY_CREATION_TMS