Monitor an Apache service with Solution Monitoring
Dear all,
We are using Solution Monitoring and the Service Level Reporting and now I'd like to monitor an Apache Service to see its uptime.
I tried to create a GRMG scenario for this, however I noticed that a GRMG scenario always requires a port number in the URL.
Does anybody of you know if it is possible:
1) to monitor an Apache Service with Solution Monitoring (TA DSWP)
2) to make it part of the Service Level reporting
3) any other technology to make the uptime of an Apache Service part of the Service Level Reporting
Thanks a lot in advance for your help!
It is highly appreciated...
Best regards,
Roel
Hello Joe,
If u do not want to import any Structure or BOR- Object, u can follow below steps :
1. Create ur data model by adding the properties manually in SAP GW service builder with correct Edm types.Doing this would be pain in my opinion ( sometimes we are forced to do this but no other option doing this way )
Create associations & navigation needed.
2. U can generate run-time objects.
3. Go to appropriate classes and implement methods with ur Business Logic.
4. Register ur service & consume.
U can also import RFC to create data model and create mapping as per required by implementing correct method as well.
once u do this generate objects and register service and consume it.
Check this out for ur info :
Detailed step by step procedure for Creating Gateway Service with all the CRUD Operations and testing them in Service Explorer Part1
Regards,
Ashwin
Similar Messages
-
Monitoring BI PROCESS CHAIN with Solution Manager BPMON
Hello,
I'm trying to setup the monitoring of BI process chain using the BPMON
I setup the process chain monitoring using BPmon application monitoring "BI Process Chain Monitoring" (BOBIPCMO)
but than I'm not able to read the process chain names,steps,and variant from satellite system
On other systems,using different application monitor (like PI MONITOR) is working fine
i'm using the latest plug-in ST-A/PI 01L_BCO700 on entire landscape
My bi system is 7.01 EHP1 sp4
solution Manager is 7.01 EHP1 SP20
Any suggestiions?
Thanks
MarcoHello Marco,
the problem is that the Process Chain monitor is not yet available with ST-A/PI 01L*. Unfortunately the empty hull that you see during the setup was shipped without the proper content. The Process Chain monitor will be properly shipped with the next ST-PI and ST-A/PI combination in Q2/2010.
Sorry for any inconvenience caused.
If you want to have this monitor earlier on it could be implemented via Customer Exit in case that you have some MaxAttention or Safeguarding engagement.
Best Regards
Volker -
CCMS Configuration - Central Monitoring and Email Alerts with Solution Mgr
I am trying to configure my CCMS alerts on my satellite systems to be linked into the Solution manager system (acting as the CEN monitoring node). If I have already setup my RZ20 alerts, is there a way I can just link these into Solution Manager.
Thanking you for your suggestionsTry setting up the monitoring RFC connections in SMSY. Once those are setup, you can pull the CCMS data in and view within tran SOLUTION+MANAGER.
If you need more detail, just update this message.
Thanks,
J. Haynes -
Regarding Monitoring Service for Solution manager
We need to configure "Monitoring" services in SAP solution manager 7.0.
Could somebody suggest us what are the main tasks we need to consider for doing Monitoring settings.
How many Minimum servers required to configure Monitoring services in solution manager system.
Also if any good document reference for this?
ThanksHi Jai,
welcome to sdn.
COMPONENTS & TOOLS OF SAP NETWEAVER
SAP Solution Manager
The SAP Solution Manager application management solution facilitates technical support for distributed systems u2013 with functionality that covers all key aspects of solution deployment, operation, and continuous improvement. A centralized, robust application management and administration solution, SAP Solution Manager combines tools, content, and direct access to SAP to increase the reliability of solutions and lower total cost of ownership.
With SAP Solution Manager, you can be sure your entire SAP solution environment is performing at its maximum potential. The toolset addresses your entire IT environment, supporting SAP and non-SAP software and covering current and forthcoming SAP solutions. And, as a customer of SAP, you have full access to the core SAP Solution Manager for no extra charge.
SAP Solution Manager targets both technical and business aspects of your solutions, focusing strongly on core business processes. It supports the connection between business processes and the underlying IT infrastructure. As a result, it eases communication between your IT department and your lines of business. And it ensures that you derive the maximum benefits from your IT investments.
SAP Solution Manager features and functions include:
SAP Business Suite implementation and upgrades u2013 SAP Solution Manager provides content that accelerates implementation. Configuration information and a process-driven approach to implementation speed the blueprint, configuration, and final preparation phases. SAP Solution Manager enables efficient project administration and centralized control of cross-component implementations.
Change control management u2013 SAP Solution Manager controls all software and configuration changes of the IT solution. This includes the approval process for change requests, the deployment of changes, and later analysis of changes. This ensures quality of the solution and enables traceability of all changes.
Testing u2013 SAP Solution Manager speeds test preparation and execution. It provides a single point of access to the complete system landscape and enables centralized storage of testing material and test results to support cross-component tests.
IT and application support u2013 The service desk included in SAP Solution Manager helps you manage incidents more efficiently and eases the settlement of support costs. Centralized handling of support messages makes the support organization more efficient.
Root cause analysis u2013 The diagnostics functions in SAP Solution Manager allow identification, analysis, and resolution of problems, even in heterogeneous environments. This helps to isolate general performance bottlenecks, to isolate exceptional situations, to record the activity of single users or processes, and to identify changes to the productive landscape. As a result, problem resolution is accelerated and business availability increased.
Solution monitoring u2013 SAP Solution Manager performs centralized, real-time monitoring of systems, business processes, and interfaces, which reduces administration effort. It can even monitor intersystem dependencies. Proactive monitoring helps you avoid critical situations, while automatic notifications enable fast response to issues.
Service-level management and reporting u2013 SAP Solution Manager allows easy definition of service levels and provides automated reporting. Service reporting covers all systems in the solution landscape and provides a consolidated report containing the information you need to make strategic IT decisions.
Service processing u2013 SAP Solution Manager makes appropriate service recommendations and delivers SAP support services. These include SAP Safeguarding, which helps you manage technical risk; SAP Solution Management Optimization, which helps you get the most from your SAP solutions; and SAP Empowering, which helps you manage your solutions.
Administration u2013 Administration tasks are mainly executed locally on the involved systems, but can be accessed and triggered from a central administration console. The administration work center in SAP Solution Manager offers a central entry point and unified access to all SAP technology.
SAP Solution Manager as the name suggests is for managing the whole gamut of SAP and Non-SAP solutions in the IT Landscape of an organisation. It provides you the tool, content and gateway to create, operate, manage and monitor your solutions over time.
It provides a range of scenarios to support this. Extending from project management to Solution Monitoring to Service Desk to E-learning Management, it provides an efficient way to carry out a plethora of business tasks.
SAP Solution Manager is the successor to ASAP ValueSAP. SAP Solution Manager helps in implementing and managing complex system landscapes. Globally systems are getting distributed across geographies and business processes cover more than one system. In such complex scenarios, integrating technical and business requirements is important for the success of IT. SAP Solution Manager provides SAP customers with an efficient means of handling both the technical and business process side of solution implementation .
As part of SAP Solution Management Solutions, the customers receive best practices relating to:
- Global Strategy and Service Level Management
- Business Process Management
- Management of MySAP Technology
- Software Change Management
- Support Desk Management
SAP delivers this using support programs during implementation of the system solution. Some of the benefits of using SAP's Solution Manager are that it helps:
- Manages the technical risk associated with the implementation of the solution ensuring technical robustness
- Helps leverage users core competencies in implementing solutions
- Ensures solution works as intended with best practices built in.
see these links...
http://www.ne-sap-solution-manager.com/
http://www.saptechies.com/category/sap-solution-manager/
thanks
karthik
reward me if usefull -
Basic Strategy / Best Practices for System Monitoring with Solution Manager
I am very new to SAP and the Basis group at my company. I will be working on a project to identify the best practices of System and Service level monitoring using Solution Manager. I have read a good amount about SAP Solution Manager and the concept of monitoring but need to begin mapping out a monitoring strategy.
We currently utilize the RZ20 transaction and basic CCMS monitors such as watching for update errors, availability, short dumps, etc.. What else should be monitored in order to proactively find possible issues. Are there any best practices you all have found when implimenting Monitoring for new solutions added to the SAP landscape.... what are common things we would want to monitor over say ERP, CRM, SRM, etc?
Thanks in advance for any comments or suggestions!Hi Mike,
Did you try the following link ?
If not, it may be useful to some extent:
http://service.sap.com/bestpractices
---> Cross-Industry Packages ---> Best Practices for Solution Management
You have quite a few documents there - those on BPM may also cover Solution Monitoring aspects.
Best regards,
Srini
Edited by: Srinivasan Radhakrishnan on Jul 7, 2008 7:02 PM -
System Monitoring with Solution Manager Ehp1
Hi,
I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
<SID>_RZ20_COLLECT
<SID>_RZ20_ANALYZE
I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
<SID>_RZ20_COLLECT_123539Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
Please, Could you help me?
Thanks and regards,
Tomas.Tomas,
I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system). I downloaded the lates ccmsagent file from the market place based my target system configurations.
Herewith attaching the logs while I'm trying to check the profile parameter.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
== Checking profile: /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
***WARNING: Unexpected parameter: dbs/io_buf_size =100000
***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
***WARNING: Unexpected parameter: rsau/selector1/class =35
***WARNING: Unexpected parameter: rsau/selector1/severity =2
***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
***ERROR: Size of shared memory pool 40 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 40
with parameters like: ipc/shm_psize_<key> =0
SOLUTION: Increase size of shared memory pool 40
with parameter: ipc/shm_psize_40 =1472000000
Shared memory disposition overview
================================================================
Shared memory pools
Key: 10 Pool
Size configured.....: 642000000 ( 612.3 MB)
Size min. estimated.: 637597428 ( 608.1 MB)
Advised Size........: 640000000 ( 610.4 MB)
Key: 40 Pool for database buffers
Size configured.....: 1048000000 ( 999.4 MB)
Size min. estimated.: 1468229308 (1400.2 MB)
Advised Size........: 1472000000 (1403.8 MB)
Shared memories inside of pool 10
Key: 1 Size: 2500 ( 0.0 MB) System administration
Key: 4 Size: 523648 ( 0.5 MB) statistic area
Key: 7 Size: 14838 ( 0.0 MB) Update task administration
Key: 8 Size: 67108964 ( 64.0 MB) Paging buffer
Key: 9 Size: 134217828 ( 128.0 MB) Roll buffer
Key: 11 Size: 500000 ( 0.5 MB) Factory calender buffer
Key: 12 Size: 6000000 ( 5.7 MB) TemSe Char-Code convert Buf.
Key: 13 Size: 200500000 ( 191.2 MB) Alert Area
Key: 16 Size: 22400 ( 0.0 MB) Semaphore activity monitoring
Key: 17 Size: 2672386 ( 2.5 MB) Roll administration
Key: 30 Size: 37888 ( 0.0 MB) Taskhandler runtime admin.
Key: 31 Size: 4806000 ( 4.6 MB) Dispatcher request queue
Key: 33 Size: 39936000 ( 38.1 MB) Table buffer, part.buffering
Key: 34 Size: 20480000 ( 19.5 MB) Enqueue table
Key: 51 Size: 3200000 ( 3.1 MB) Extended memory admin.
Key: 52 Size: 40000 ( 0.0 MB) Message Server buffer
Key: 54 Size: 20488192 ( 19.5 MB) Export/Import buffer
Key: 55 Size: 8192 ( 0.0 MB) Spool local printer+joblist
Key: 57 Size: 1048576 ( 1.0 MB) Profilparameter in shared mem
Key: 58 Size: 4096 ( 0.0 MB) Enqueue ID for reset
Key: 62 Size: 85983232 ( 82.0 MB) Memory pipes
Shared memories inside of pool 40
Key: 2 Size: 31168040 ( 29.7 MB) Disp. administration tables
Key: 3 Size: 114048000 ( 108.8 MB) Disp. communication areas
Key: 6 Size: 1064960000 (1015.6 MB) ABAP program buffer
Key: 14 Size: 28600000 ( 27.3 MB) Presentation buffer
Key: 19 Size: 90000000 ( 85.8 MB) Table-buffer
Key: 42 Size: 13920992 ( 13.3 MB) DB TTAB buffer
Key: 43 Size: 43422392 ( 41.4 MB) DB FTAB buffer
Key: 44 Size: 8606392 ( 8.2 MB) DB IREC buffer
Key: 45 Size: 6558392 ( 6.3 MB) DB short nametab buffer
Key: 46 Size: 20480 ( 0.0 MB) DB sync table
Key: 47 Size: 13313024 ( 12.7 MB) DB CUA buffer
Key: 48 Size: 300000 ( 0.3 MB) Number range buffer
Key: 49 Size: 3309932 ( 3.2 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key: 18 Size: 1792100 ( 1.7 MB) Paging adminitration
Key: 41 Size: 25010000 ( 23.9 MB) DB statistics buffer
Key: 63 Size: 409600 ( 0.4 MB) ICMAN shared memory
Key: 64 Size: 4202496 ( 4.0 MB) Online Text Repository Buf.
Key: 65 Size: 4202496 ( 4.0 MB) Export/Import Shared Memory
Key: 1002 Size: 400000 ( 0.4 MB) Performance monitoring V01.0
Key: 58900130 Size: 4096 ( 0.0 MB) SCSA area
Nr of operating system shared memory segments: 9
Shared memory resource requirements estimated
================================================================
Nr of shared memory descriptors required for
Extended Memory Management (unnamed mapped file).: 64
Total Nr of shared segments required.....: 73
System-imposed number of shared memories.: 1000
Shared memory segment size required min..: 1472000000 (1403.8 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 2050.4 MB
..in pool 10 608.1 MB, 99% used
..in pool 40 999.4 MB, 140% used !!
..not in pool: 34.4 MB
Processes........................: 716.8 MB
Extended Memory .................: 8192.0 MB
Total, minimum requirement.......: 10959.2 MB
Process local heaps, worst case..: 1907.3 MB
Total, worst case requirement....: 12866.5 MB
Errors detected..................: 1
Warnings detected................: 9
After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
Pls have a look at these two and let me know what could I do to proceed further.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
INFO: Central Monitoring System is [SMP]. (found in config file)
additional CENTRAL system y/[n] ? :
INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
INFO:
CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
compiled at Jun 28 2010
systemid 324 (IBM RS/6000 with AIX)
relno 6400
patch text patch collection 2010/1, OSS note 1304480
patchno 335
INFO Runtime:
running on saptqa01 AIX 3 5 00069A8FD600
running with profile /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO profile parameters:
alert/MONI_SEGM_SIZE = 200000000
alert/TRACE = 1
SAPSYSTEM = 30
SAPSYSTEMNAME = TQA
SAPLOCALHOST = saptqa01
DIR_CCMS = /usr/sap/ccms
DIR_LOGGING = /usr/sap/TQA/DVEBMGS30/log
DIR_PERF = /usr/sap/tmp
INFO:
pid 4165682
INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct 3 2008, kernel 6400_20020600_254, platform 324 (IBM RS/6000 with AIX)]
segment status ENABLED
segment started at Tue Sep 14 09:35:56 2010
segment version 20040229
ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
Please change configuration with profile parameters
ipc/shm_psize_01 = -<different pool nr>
xor
ipc/shm_psize_13 = -<different pool nr>
EXITING with code 1 -
Unified Job Monitoring -Share your experiences with SAP Solution Manager 7.1
Dear Forum members,
I woudl like to introduce myself as Raghav, S. I am in the development team responsible for building the unified job monitoring workcenter starting 7.1 SP10 (onwards).
Please post your feedback, current status wrt to setup, commmon issues in this area.
I will be more than glad to help you here.
Regards, Raghav
Development Manager
CLM - Solution manager team, Labs India.Hello Raghev,
we implemented unfied job monitoring on a larger scale by now, starting out with the monitoring of SAP Standard & Reorg Jobs.
Everything seemed quiet OK at the beginning, but over time display performance of the Monitoring UI decreased drastically (exceeding 5 Min. "per click" in the UI).
I pinned this down to the following (Oracle) SQL access:
SELECT
"CLIENT", "CONTEXT_ID", "TYPE_ID", "HASH_METRIC_PATH", "START_TIMESTAMP", "IS_CURRENT", "END_TIMESTAMP",
"METRIC_PATH", "RATING_AGGREGATE", "VALUE_MIN", "VALUE_MAX", "VALUE_SUM", "VALUE_COUNT", "VALUE_LAST",
"VALUE_DATA_TYPE", "VALUE_MAX_TIME", "LAST_TEXT"
FROM
"MES_DB_AGGREGATE"
WHERE
"CLIENT"=:A0 AND "CONTEXT_ID"=:A1 AND "TYPE_ID"=:A2 AND "IS_CURRENT"=:A3 OR "CLIENT"=:A4 AND
"CONTEXT_ID"=:A5 AND "TYPE_ID"=:A6 AND "IS_CURRENT"=:A7 OR "CLIENT"=:A8 AND "CONTEXT_ID"=:A9 AND
"TYPE_ID"=:A10 AND "IS_CURRENT"=:A11 OR "CLIENT"=:A12 AND "CONTEXT_ID"=:A13 AND "TYPE_ID"=:A14 AND
"IS_CURRENT"=:A15 OR "CLIENT"=:A16 AND "CONTEXT_ID"=:A17 AND "TYPE_ID"=:A18 AND "IS_CURRENT"=:A19
The execution plan used for this SQL is:
0
SELECT STATEMENT
1
INLIST ITERATOR
2
TABLE ACCESS BY INDEX ROWID MES_DB_AGGREGATE
3
INDEX RANGE SCAN MES_DB_AGGREGATECU
MES_DB_AGGREGATE in our case has over 5 million entries.
The parameterization of the DB incl. Memory and all should be OK.
The index range scan simply takes that long.
This might be, because the MES_DB_AGGREGATECU index has the lowest cardinality column (CLIENT) first.
Header 1
Header 2
COLUMN_NAME
NUM_DISTINCT
CLIENT
1
CONTEXT_ID
433
TYPE_ID
2192
IS_CURRENT
2
Could you have your team check on this, because with the situation as is, the Job Monitoring application seemingly becomes non-usable, as soon, as you start to scale up.
Best Regards,
Thorsten -
Issues with Monitoring Azure services with SCOM 2012 R2
Hi,
I'm trying to setup monitoring of our Azure subscriptions in a new installation of Operations Manager 2012 R2 which is running in-house as it is also monitoring our internal services. I've used the guide below:
http://blogs.msdn.com/b/walterm/archive/2013/04/13/first-impressions-on-system-center-management-pack-for-windows-azure-fabric-preview-for-scom-2012-sp1.aspx
This has all worked OK and I've been able to add the subscription into OP Manager and it's found the cloud service, storage and VM's. However when I try to add the monitoring and I go to create this When I select the Add option in the Add Monitoring
Wizard and click the Search button to list the components (Cloud Service, Storage and VM's) nothing is found despite me having already selected the subscription.
Has anyone else experienced this or can offer any advice?
Many Thanks
ColinHi,
Which version of RDP client you are using for your client?
Does more user login at same period of time?
As you have commented that after sticking the user can’t able to login in RDCB server, here I can suggest you to check the setting of connection broker. Also you can check that you have place the proper location path of UPD while configuring in collection configuration
wizard. You can take a look at below article foe virtual desktop configuration.
Deploying Virtual Desktops with Windows Server 2012
Are you trying to use same UPD for different collection then also it might happens to occur your issue. The fact of UPD is User profile disks are for a single collection only. A user connecting to two different collections will have two separate profiles. If
you want to synchronize settings, refer to Microsoft User Experience Virtualization. Go through this article for more understanding related to UPD.
Working with User Profile Disks on Session-Based Desktop Deployments
Hope it helps!
Thanks. -
Hi All,
I need to develop a monitoring application for SAP system which will monitor both Host systems and instances.
For this I need to collect Host data as well as instance data. In the below links I could find the SAP netweaver
monitoring agents
Monitoring Hosts with SAPHostControl and saphostexec - Infrastructure of the SAP NetWeaver Management Agents - SAP Libra…
Central Monitoring with SAP NetWeaver Management Agents - Infrastructure of the SAP NetWeaver Management Agents - SAP Li…
Administration/Monitoring of SAP Components with sapstartsrv - Infrastructure of the SAP NetWeaver Management Agents - S…
These links tell that CCMS agent is replaced by these agents from SAP Netweaver 7.0 Eph 2.
I found below doc which explains "How to use the SAPControl Web Service Interfaces" exposed by "sapstartsrv" to execute instance specific tasks,
But it does not tells any methods/APIs/webservice interfaces specific to Host system or get OS data using "saposcol".
SAP Control WebService
Similar to this, Is there any API/webservice to retrieve the OS and Host related data??.
Also, Is there any other doc for SAPHostControl or saphostexec similar to sapstartsrv ??
Thanks,
SwapnilHi Swapnil,
I too wanted this info and came across these.
Take a look at these urls :-
http://localhost:1128/SAPHostControl/?wsdl
http://localhost:1128/SAPOscol/?wsdl
grep saphost /etc/services
saphostctrl 1128/tcp # SAPHostControl over SOAP/HTTP
saphostctrls 1129/tcp # SAPHostControl over SOAP/HTTPS
Hope this helps.
Cheers
Craig -
Solution Monitoring configuration with solution manager 4.0
Hi Friends,
I have to the Solution Monitoring configuration with solution manager 4.0.
Please provide steps or screen shot if any body having that.Hi,
Check <a href="https://websmp108.sap-ag.de/sapidb/011000358700005479192006E.sim">this.</a> and <a href="https://websmp108.sap-ag.de/sapidb/011000358700006936062005E.sim">this</a>.
This will solve your problem.
Feel free to revert back.
--Ragu
Message was edited by:
Raguraman C -
SABRIX/JBOSS monitoring with Solution Manager and Wily Introscope
Reading SCN discussions it is not quite clear to me if an extra (Wily) license is needed for monitoring SABRIX/JBOSS with Solution Manager and Wily Introscope. Does someone have experience in this area what exact to do?
Hi GSAP,
Please check this pdf file:
Wily Introscope a CA Product- Utility that Comes with Solution Manager Specifically for Java Monitoring
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50973df5-e1d1-2c10-cf89-c177fbfd7e65?QuickLink=index&…
Thanks
Vikram -
DSWP Solution Monitoring some Alerts with a grey ranking
Hallo Solman Gurus,
I have a problem since I have seted up the solution Monitoring in transaction DSWP. Some of my monitored Elements have a grey ranking (like the SAPOSCOL status). It very strange, when I navigate to the Alert overview it shows me the green, yellow and red ranking for the selected MTE's and also this gray ranking.
My first suggestion was, the the selected MTE is only a info Element, like the IP Adress, means the MTE show only a static value after its started. But I got also the grey ranking for Security, Syslog and TMS MTE's.
When I commit all red rankings in of a system and go back to the System overview, the former commited system has a general grey status and not a green. Does anybody knows, what this grey status means and how I can solve the issue, the the MTE's have the correct ranking??? My Solman Version is 7EHP1 SP3.
Thanks and Bye.Hello,
Please check the following two notes which should resolve your issue:
762696 - Grey rating for Earlywatch Alert
1322899 - EWA incomplete after importing EHP/product incorrect
Thanks,
Mark -
You cannot shadow a session with multiple monitors enabled in Windows Server 2008 R2
Searching through the forums (and according to KB2484290) it appears that there is no solution to this problem. We are rolling out thin clients that are using dual monitors exclusively and we were very surprised to find out that we couldn't shadow
sessions with dual monitors (which to us means that we can't shadow ANY sessions). This now completely changes our approach to managing these devices.
We are running Windows Server 2008 R2 SP1 with Remote Desktop Services installed. The thin clients are running Windows Embedded Standard 7 with the latest updates / RDP client. All steps have been followed to ensure that the apropriate settings and
permissions have been set up to allow access into the session.
We tested by unchecking the RDP setting “use all my monitors for the remote session”, with that setting disabled shadowing worked
Questions:
1. KB2484290 is from Dec 2010 - It's now April 2012, is there a workaround / hotfix for this issue that will allow us to shadow sessions using the native Microsoft tools?
2. Are there any recommended alternatives (software)? Free/Paid - doesn't matter we just need something that will work. I'm sure there are a few options out there but I am looking for suggestions for what people have used in the past that worked
best for them to help us narrow down the choices.Hi,
In my experience, so far, the workaround is Remote Assistance, Remote Assistance supports multiple monitors, and is the presently recommended solution if you need this functionality. Remote Assistance is a Windows Server Feature that must be explicitly installed
on Windows Server 2008 R2; it is already installed with the client versions of the operating system.
More information:
Remote Assistance Overview
http://technet.microsoft.com/en-us/library/cc753881.aspx
Remote Assistance and Resulting Internet Communication in Windows Server 2008
http://technet.microsoft.com/en-us/library/cc770456(v=ws.10).aspx
As far as I know, there are some third-party tools can be used as the solution, such as Teamviewer, ISL Online, etc.
Please Note: The third-party products discussed here are manufactured by companies that are independent of Microsoft. We make no warranty, implied or otherwise, regarding
these products' performance or reliability.
Regards,
Dollar Wang
Forum Support
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Technology changes life…… -
Solution Monitoring in JAVA Based Components ?
Hello Experts,
I have configured the Solution Monitoring in Solution Manager server with Satelite systems (ECC and CRM systems.) in Abap based Components
1.Earlywatch Alert
2,System Monitroing
3,Central System Administration
4,Service Level report All of them working fine
Now I want to setup all the above setup for Java based Components.
1.Is it possible to setup Solution Monirtoring in Java?.
2. How to configure the above setup?.
3. Is there any simulator or Help files availale?.
Thanks
ThirumalHI Mayank,
I have followed the below steps.
basic steps for JAVA EWA:
configure solution manager diagnostics tool in solman
install wily interscope manager in solman
install SMD agents in satellite system
install wily agents in satellite system.
make sure about the sp level in satellite system.
The wily files depends on the SP - level
1.Could you tell me how to generate the EWA report for JAVA.
2. Could you give me document/simulator to configure the workcenter
Thanks
Thirumal -
Hi:
I have an application using either JInitiator 1.3.x or Sun Java Plug-In 1.4.2.x which works fine.
But I have several users with two monitors and if the user move the application to the secondary monitor the menu didn't work (using JInitiator or Sun JPI).
We are trying to move our iAS configuration to use only Sun JPI.
Is any solution for that behavior of the application when I have two monitors.
Abdel Miranda
Panama.Has anyone tried to apply this patch to a middle-tier installation of just Forms and Reports Services, rather than a full Oracle AS installation? Do you know if this patch can be used in this way? The Readme is full of info about things like OID and Metadata Repositories which don't really apply to us.
I'm also worried (and unclear) about what databases are supported by this patch - in one place it says the minimum db version for patch 10.1.2.2 is DB 10g, whereas elsewhere it talks about only needing DB 9.2.0.7. (Neither of which is good for us, we're still on 9.2.0.6.) But then, for an install of just Forms and Reports Services, maybe I won't need to apply the database part of the patch..?
I'd be intererested if anyone else has patched a pure Forms and Reports install...
James
Maybe you are looking for
-
Cannot install updates for Acrobat X Pro for Mac
I have version 10.0.13. I had singed up for notification of updates but have not received any so I am now looking to download any updates past this version. I am not ready to move to XI. When I go to install and it asks to select the file I want t
-
Adding DVD File to Library - File Name Changes
When I add a DVD file name to my library, iTunes changes the name of the file. How do I retain the name of the file that is in my iTunes sub-directory?
-
Purchase Order - Delivery Schedule
Hi, I have 2 problems 1) when I try change Delivery Schedule Delivery Date, Quantity and statistical Date I have problem in 1st Delivery Line statistical Date i can't able to change that remaining delivery line 2,3 and so on I can able to do change.
-
Sql Dev Third party migration issue
i have installed 11g on window 7 using Sql Developer of 11g i am migrating the sql server 2008 database to Oracle 11g Migration> Quick Migration selecting Source Connection >Target Connection> Repository AND verifyit generate Errors: Locating source
-
I purchased an itunes gift card for my nephew. I received a confirmation that the credit card had been debited, however he never received a code to activate his gift. Where can I find out the code for my gift voucher?