Monitor audio tracks not currently being captured?

While logging and/or capturing, I would like to be able to hear what's going on in an audio track I have not currently selected for log or capture. This way, I can keep an eye -or rather ear- on whether the sound man added a second mic between takes or something interesting has developed with the boom audio.
It appears as if I can only monitor what I've selected to log or capture in the Audio portion of the Clip Settings tab of the Log and Capture tool. Is that true? If I think I don't want it, I don't get to hear it?
Martin

That is the FIREWIRE feed. There are still audio outputs on the back of the deck. If there are more than two, you are in luck. If there aren't, then SOL.
Shane

Similar Messages

  • Is it possible to monitor audio through my mac while capturing from a tape in FCPX

    Is it possible to monitor audio through my mac while capturing from a tape in FCPX?

    I am sure that as you import a tape you will hear the audio as well as see the video.
    Have you got FCP X?
    If not, download the free 30 day trial.
    http://www.apple.com/finalcutpro/trial/

  • My w1972a monitor audio is not working

    my w1972a monitor audio is not working

    Hi,
    How do you connect it ? The specs is:
        HP W1972a 18.5-inch LED Backlit LCD Monitor
    You need sound cable from you computer to the monitor.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Video and audio tracks not synchronized after importing

    When I try to watch a video in quicktime or itunes video and audio tracks not synchronized. If I wach on another player they are synced. Anyone help?

    John:
    Thanks for your reply.  Excuse my referring to you as "Kevin".  I'm new to the Adobe Community.  I have also referenced another article which is seemingly a bit easier to fix for such a non-technical woman like myself.  I'm going to try both solutions.  Whichever works I'll be sure to reply to the thread with my findings.  I found this article which provides the following solution:  http://blog.flickharrison.com/2012/04/problem-solving-in-adobe-premiere-audio-glitches-and -sync/

  • Audio tracks suddenly missing from capture... need help!

    Hi! I have been capturing video (with audio) successfully and routinely for months now. Suddenly, though, when I capture video... from the same device, with the same preset... the clips have only 1 Video track, and no Audio tracks. My camera is still recording audio (and I still hear it during the capture), but the audio tracks just aren't there in the resultant clip. It seems to me like FCE has just decided not to capture audio, as if to say "pffft... we don't need that." But why this happened is beyond me!
    Even within this same project, I have other clips captured with audio just fine. I didn't even realize it was an option NOT to capture audio. There aren't any settings to that effect in the Capture window... i.e. there's nothing to turn OFF, so I don't know how to turn it back ON! HELP! How do I get audio back on my captured clips? Is there a way to toggle this? How can I possibly be getting video without audio when the preset has already been working for this device?
    Things seemed to change once I started using the Voice Over tool. After that, none of my captured clips have audio. Something I did on or around that time changed FCE internally. I combed through the manual but didn't see any leads. They assume if you have the right preset, it'll just work. No mention of disabling audio.
    Please help, because I'm just about ready to throw my Mac throw the wall. I even tried reinstalling FCE, just to get it back to the previous state, but it didn't help.
    P.S. I also haven't changed anything on my camera that would affect audio. I feel this is just a setting somewhere in FCE that I can't find and don't even know where to look for it...
    Thanks in advance!!

    Hi. Where should I look for them? I haven't had much success finding things on my own, so please spell it out for me.
    I just find this so odd... it would be one thing for the tracks to be silent or garbled, then I would think this was a cable issue or the camera. But I can't even imagine why the audio tracks would just not be there. If I saw a preference for "Video Only Capture" somewhere, it would make sense.
    Anyway, thanks. Please tell me where there's a prefs file, and I'll roast it.

  • Audio tracks not lined up and no sound

    For some reason my audio tracks for my clips are on different tracks. Most are on a5/a6 and a3/a4 - those play with sound. The audio on a1/a2 is not heard when I play the clip??? When I try to move the audio to different tracks it messes up my video.
    What I want to do is either figure out how to get the audio on a1/a2 to be heard OR move the audio to tracks that I know work without moving the video.
    Can anyone help?

    No mute. Maybe the tracks are off - but I don't think so? I have a screen capture -- although I cannot figure out how to add that to the post - can you do that???
    the only thing that is different is that the source for the ones that don't work A1/A2 havea source of a1/a2 that is connected. Even if I 'break apart' the a1 from the A1 and the a2 from the A2 still no sound...

  • Multiple audio tracks not showing up on iphone video.

    I created my video in iMovie '09 v. 8.0.6
    I have two audio tracks, one person talking in the video and another being a background track. The video exports fine. The audio works when I play on the computer and after I have uploaded to my kickstarter site. When I try to play the video back from the kickstarter page on my iphone or ipad it only plays the background music, no audio from the person talking in the video. HOWEVER, if I plug in the headphones and listen it sounds fine.
    What is the deal? Is there some setting I am missing when exporting that will allow both audio channels to play on the iphone external speaker?
    Thanks.

    I was having the same issue too. I was hoping that apple will address this issue with a SW update or at least someone from apple would be kind enough to answer this thread.
    After researching for a couple days I found a solution. It's not the most efficient, but it works. You'll need a CD-R or CD-RW with this method. The trick is you need to convert m4p file format to mpa or mp3 file format.
    You can follow the following steps:
    1. Open iTunes
    2. Create a New Playlist: File -> New Playlist
    3. Drag the song(s) to the playlist you just created. Note: Depending on the file size you might only be able to burn just 1 song at a time
    4. Insert a Blank CD to your disk drive.
    5. Right click on the playlist then click "Burn Playlist to Disk." Then click burn. Make sure the Disc format is set to Audio CD.
    6. Once the disc is finished, click on the CD in the device section in iTunes. Right click the song and click "Create AAC Version." This will create a .mpa file into your iTunes.
    7. Copy that file to your iPhone and you're golden
    Hope this helps guys. I know it's not the most elegant solution, but it works and now you can workout with those tunes. I know I've been quite frustrated because my tracks didn't show up, hopefully the new SW update will fix this.
    I would appreciate any apple genius' solution that is more efficient as well.
    Cheers

  • Audio Track Not Changing CS3 Encore Preview

    I have done this before (it has been a few months) and I hope I am missing something obvious.  I have 1 timeline with 19 avi's from PPCS3 with their related audio on Audio 1 track.  I have added music on Audio 2.  Everything plays fine in the monitor when I select either Audio 1 or 2 with the little speaker on the left side of the timeline.  My main menu has a button to select a submenu that has two buttons - one for game sounds (soccer games) and one for music.  I have used specify link and choose the appropriate audio track and link back to the main menu.  Just for fun (after I could not get the music to play in preview) I added a subtitle track 1 that contains the artist and song title (my first attempt at subtitles) and this works fine when music is selected (and not when you select game sound since I set subtitle track to 0), but in preview it is stuck on Audio 1 and even when I change manually in preview to Audio 2 - Audio 1 keeps playing.  Any suggestions would be appreciated.
    Bob

    Took a hint from another post that preview does not always work.  This is the first time I have had this problem, but I usually come to Encore by way of export from PPCS3.  I built to folder and it played like I wanted with software.  Now I will finish the project and feel confident that it will work.
    Just in case anyone is reading this, I had another error that it took me a few minutes to figure out in this project.  The default location for chapters was too close to the beginning of a chapter and that chapter would not play even though the build check said there were no errors.  I hope some of these problems are not in CS5.
    Bob

  • Record button only available for AUDIO TRACK, not for AUDIO INST.

    Hi -- For some reason Logic Express 7.1.1 is only giving me the opportunity to record enable tracks that are AUDIO TRACKS. All of my other tracks (mainly software synths) using the AUDIO INSTRUMENTS don't have the ability to record.
    I opened previous files where I'd recorded on these tracks, but even on older files, the option still is not there.
    Any thoughts?
    As for setup, I just have an MAudio keystaton attached via USB, and it's playing the software instruments fine. Also, I sometimes have an MBox hooked up (although not right now.) I updated this recently for TIGER, and I didn't know if this messed it up.
    Powerbook G4, 1.5 GHz   Mac OS X (10.4.5)  

    don't know if on Logic express there's the key command 'Capture Last Take as Recording'.
    If yes,during playback you can play anything you like on your keyboard and by pressing the keys that you have assigned for this key command you can have everything that you played as events on the specific audio instrument as if you were in record mode.
    If you move the SPL the new information will delete the previous one.
    powerbook G4   Mac OS X (10.4.5)   logic pro 7.1.1,FW410 m-audio

  • Audio tracks not playing

    A really odd thing keeps happening to me.
    When I open my Logic projects it often doesn't play all the audio tracks. If I double-click a region and open it in sample editor I can play it from there but still it doesn't play the track in arrange. And the weird thing is it's not always the same track.
    Has this happened to anyone else? It doesn't even bounce the tracks offline, the tracks are absolutely mute.

    do they play when moved to another track?
    are they light gray in color? select track or segment and hit the m key.
    are they assigned to a bus?

  • Audio Tracks Not Sounding

    Hello,
    I have several clips (and audio tracks) in a sequence that won't play audio all the sudden. I have no idea why. The problem audio tracks are darkened, and play fine outside the sequence. I'm working in FCP v. 6.0.1.
    Does anyone know what could be causing this? I can't find anything in the manuals -- any help would be greatly appreciated.
    Thanks,
    Therese

    Hi Therese,
    Make sure your audio tracks are not muted. On the left of the tracks there are green buttons for muting, toggling them will mute/unmute your audio.
    Also, if you have an icon of a tiny pair of headphones to the left of these buttons make sure these are not enabled (showing orange).
    DM
    Message was edited by: David Mclaine

  • Audio Tracks not showing in itunes.

    Dear All
    After transferring audio tracks to itunes library I am manually dragging them to my ipod shuffle and the songs are shown in the shuffle but when I am deleting the tracks from the itunes library then nothing is shown in the ipod shuffle folder of itunes but the settings tab shows the amount of space used and the songs are present in the ipod as I can play them. I am not able to manage or change the sequence of song in shuffle since it is not shown in the device folder of itunes.How will I be able to see the list of songs presently transferred in my ipod shuffle if I delete them from the itunes library ?
    Help please.
    Thank you.

    Deba007 wrote:
    Actually I dont keep my audio tracks in my Hard Drive but its in DVDs and CDs. Therefore I import them into the itunes library and transfer them to shuffle manually and then delete them from the itunes library.
    When I am deleting them from my itunes library I cannot see them in the shuffle folder though I can play all the songs in ipod shuffle.This problem does not happen in my Ipod classic 160GB.
    Help Please.
    Shuffle works differently from the "Ipod classic 160GB". There is NO additional help for this issue.
    Message was edited by: 0Ari0

  • Additional audio tracks not showing up in my movie library. Thoughts?

    I have movies in both .mp4 and .m4v format with multiple audio tracks (all AAC 96kbps; 48kHz - video is .h264). When imported into iTunes, I cannot choose the alternate video tracks. However, i know that they work, because I check them in both VLC and Plex and everything is as it should be. I have made sure that the formats meets the specs of both iTunes and the AppleTV 3rd generation (which displays the same issue).
    I have accomplished this in iTunes a few weeks ago successfully so I am not sure what I am doing wrong this time. My goal is to build a collection with available audio commentaries. I am starting to Winder if iTunes holds a limit on audio track in a video. For instance - The Matrix has an addition 4 audio commentary tracks.
    I remuxed all of these myself and have a history in digital video production. If anyone has any suggestions for something simple (or not) that I may be overlooking I would greatly appreciate your input.
    Thank you!

    Hi drak0772,
    If you are having issues using Disney Movies Anywhere through iTunes, you may find the following article helpful:
    Apple Support: About Disney Movies Anywhere and iTunes Store
    http://support.apple.com/kb/HT6129
    Regards,
    - Brenden

  • Audio/Video Not Synchro when capturing

    Hi,
    I'm having an audio/video synchronization problem when capturing HDV material onto IMovie. There is probably a 1/2 sec delay. How can I resolve this problem?
    First thing iMOVIE says: Cpsturing HD at 3/4 SPEED. Should I worry about this?
    I have updated my Imovie and camcorder settings according to my sony camcorder instructions. Camcorder: SONY HVR A1E.
    Your thoughts?

    First, make sure your camera is exporting with 16 bit sound and not 12 bit.
    Something here might also help:
    iMovie: Improving audio and video synchronization
    http://docs.info.apple.com/article.html?artnum=42974

  • Monitoring Audio Track(s) in Viewer

    Hi
    Is there a way to monitor audio in the viewer in the way you can solo tracks in the timeline?
    My clips have 4 audio channels and i would just like to monitor (for example) track 1.
    Anyone got ideas ?
    Thanks for your help.

    open the audio mixer window (opt-6) set Source to Auto in the top right of that window
    in Auto, you can control audio from the active source be it the viewer or timeline/canvas from there

Maybe you are looking for

  • Phone numbers with "pause character" not working same as first-gen iPhone

    Is this a bug? When I configure a phone number in my contact list to use the "pause" character (which shows up as a comma character in the display) a number of strange things happen. For instance, if I configure the following: (###) ###-#### ,,**2216

  • Home PC Outlook to iPhone - help required...

    I have a 3G iPhone and am running Windows Vista with Outlook (No Exchang). My outlook receives email from all my pop accounts and this is where I keep all my contacts and calendar events. I want to be able to perform over the air sync (not connect th

  • Keep Getting Error 1053 when trying to update/reinstall itunes

    I tried to update Itunes and keep getting the same error message about Apple Mobile Device failing. I have tried to start/stop AMD without any luck. I have uninstalled multiple times and restarted multiple times. Just need help to get my Itunes resto

  • Can't open bridge cs4 after installing Mac OS Yosemite

    Installed Yosemite on iMac a few days ago. Now, when I try to launch Bridge CS4, the screen goes black momentarily and Bridge doesn't open. I tried downloading PSE 9 and Organizer, but I don't like them. Can I replace Bridge CS4 with a later version?

  • Problems with new iTunes 7

    i recently downloaded iTunes 7 and have been having problems with it. when i hook up my iPod i sees it but it wont let me play any of the music or my playlists. its shows all the songs as grey and down by where it shows the gigs used is a little lock