Monitor color crazy after trying to setup on iMac G3
This one has me puzzled and some history is needed so please bear with me. My wife has an iMac G3-266, tray loading Fruit model. The screen flickers and pops from time to time and from other posts it appears to be the flyback transformer. The screen has not gone out completely but time will take its toll soon. Anyway, I have a G3-233 beige desktop unit with an Apple Multiscan 15" display and I tried to hook it up to the imac to see if I could use an external monitor on the iMac. I purchased an A-B switch box, 15 pin and two cords, hooked up my G3 beige and the iMac with that setup. On restart, both computers gave me a purplish color on the monitor, I could not switch resolutions and it was even causing a freeze. I tired to recalibrate the monitor but it did not help. So I switched back and returned all to the orginal setups and then my G3 desktpo was still giving me wierd colors. I shut it off and check my connections and restarted and all was fine again. Day two..I tried just hooking the monitor to the iMac connection and leave out the switch box and the extra cables. Same story, blurry and bad colors. Again with purple and reddish highlights. So, this time when I reconnected the monitor to my G3 desktop, it was messed up again, no matter what I tried to do. I restarted several times and no go. I looked at the cord from the monitor and two pins were missing and I thought that was it but after checking my manual, it showed those two pins were not used at all. So I reconnected the monitor and restarted and low and behold things were back to normal.
My question in all this, why can I not connect the display to the iMac and have it work and why does it mess things up when I try to put it back like it was? I need to eventually do something with the iMac before the screen goes out completely. Any ideas? Thank you and sorry for the long explanation. (By the way, I have upgraded my system to an iMac G5 2.1ghz but still use the ole G3 for other stuff)
iMac G3 Mac OS 8.6 or Earlier Fruit, tray loading model
iMac G5 Mac OS X (10.4.5)
From the developer note for the Rev A iMac:
Video Display
The built-in video display uses a 15-inch CRT (13.8-inch viewable diagonal). The CRT uses shadow-mask technology and has a dot pitch of 0.28 mm. The display is multi-scan and supports three resolutions. Table 3-2 lists the resolutions and the pixel depths supported with either the standard 2 MB of SGRAM or with expanded SGRAM.
Table 3-2 Display resolutions and pixel depths
Resolution Vertical rate Pixel depth (2 MB SGRAM) Pixel depth (4 or 6 MB SGRAM)
640 by 480 117.233 Hz 32 bits 32 bits
800 by 600 94.97 Hz 32 bits 32 bits
1024 by 768 75.03 Hz 16 bits 32 bits
Those are some really fast refresh rates. I am surprised you get a picture on your 15" Multi-Scan:
Mode Resolution Vert Rate Horiz Rate DPI
VGA 640x480 60 Hz 31.77 kHz 64
Macintosh 640x480 66.7 Hz 35.0 kHz 64
SVGA 800x600 60 Hz 37.9 kHz 80
SVGA 800x600 72 Hz 48.1 kHz 80
Macintosh 832x624 75 Hz 49.7 kHz 83
1024 x768 1024x768 70 Hz 56.5 kHz 102
Similar Messages
-
I can't seem to reinstall OS X Mavericks after trying to restore my IMac to factory settings. It said, "Could not find installation information for this machine."
Recovery Partition – Recreate Without Reinstalling
Recovery Partition – Recreate Without Reinstalling (Requires Installer) -
Monitor colors dimmed after receiving a "fatal error" messag
I was going to see if I could backup my quickbooks into a windows mode. After it started to gather information, I chickened out and pressed control-period. My monitor colors are now all faded. Anyone know how to fix this?
You need to delete this application from your palm. Click on the Home button on your palm. Click on the top right where you see the time and "app" will come up with a drop-down list. Click on Delete and then select the application you want to delete.
When prompted, "are you sure you want to delete...," click on "yes."
I hope this is helpful!
Post relates to: Tungsten E2 -
I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?
What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time. -
I have been trying to setup Airpot Expresses (both old and new models) for a while now with the Airpot Utility 5.6.1 for Windows without any luck. I have tried this on multiple windows machines, factory reseted the devices if I needed to, but I have not had any success since this software arrived. I see the routers on the Airport Utility UI, I click on it then try to connect to set it up. At this point, it gets stuck with a long progress bar trying to connect to the device without any success. I also have a Macbook Pro, and this device & software has had no trouble setting up the routers. The problem is, we are shipping these small routers out to customers who use Windows machines and it is vital that the user can modify the settings using Airpot Utility. I am at a loss for what to do and if we can't find any solutions, we are going to move on to a different company for the routers we ship out.
Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help -
iCal is changing the color of my calendars to purple on all my devices even after trying to change it back to the original color. Tried turning them off, same thing.
I, too, had this problem. This is how I fixed it:
Select the calendar that changes color and export the calendar to desktop.
Delete the calendar from ical.
Create new calendar in Ical and name it to your specifications
Go to desk top and choose the calendar you moved and choose to open with Ical. This should import it back to ical.
Go into settings in ical and choose that calendar as your default calendar.
It sounds complicated but is actually easy to do. I hope this helps. -
Monitor Color Profile Changes after FUS
My monitor color profile changes after fast switching users, and then I cannot change it back in the prefs for display-color. Attempting to choose (restore) my chosen calibrated color profile does not work.
The only solution is restarting. Loging out and back in does not fix it, only a restart.
What could be causing this?
TiBook 867 1GBram 10.4.6 Mac OS X (10.4.6)Does this page contain anything useful?
(16209) -
The monitor colors were abnormal
My Mac air has an external monitor, Dell u2414h, connected through DP cable ( Mini-DP to DP). In these days, I encountered a monitor color issue, might be a bug or a hardware problem, maybe someone have this experience to confirm that, thanks in advance.
the process:
1. The Mac air connected to the external monitor, Both of the internal an external monitors are used normally;
2. closed the Mac air lid, the external monitor was still opening at this time and the OS X system can be operated normally;
3. I left the notebook to do other things;
4. About five minutes later the external monitor went to sleep;
5. More than one hour later, I came back, the OS X system was sleep, opened the lid;
6. Both of the internal and external monitors' colors were abnormal, some application icons and the desktop wallpaper had red blocks; These red blocks on the desktop wallpaper didn't disappear automatcally, must to replace a new wallpaper;
The system.log has "GPU hang:" and "Trying restart GPU ..." messages;
The loginwindow crashed, and saved a crash report;
This issue occured several times;
the system.log
May 14 10:20:56 mar kernel[0]: TBT W (2): 0x0100 [x]
May 14 10:20:56 mar kernel[0]: Wake reason: EC.LidOpen (User)
May 14 10:20:56 mar kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000320
May 14 10:20:56 mar kernel[0]: 66066.440417: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
May 14 10:20:56 mar kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
May 14 10:20:56 mar kernel[0]: RTC: PowerByCalendarDate setting ignored
May 14 10:20:56 mar kernel[0]: Previous Sleep Cause: 5
May 14 10:20:56 mar kernel[0]: AppleHSSPIController::HandleMessage Device Wake by Host
May 14 10:20:56 mar.local hidd[60]: MultitouchHID: device bootloaded
May 14 10:20:56 mar.local SystemUIServer[269]: HALDefaultDevice::GetDefaultDevice: got an error getting the default device from the server, so picking one locally
May 14 10:20:56 mar.local NotificationCenter[280]: HALDefaultDevice::GetDefaultDevice: got an error getting the default device from the server, so picking one locally
May 14 10:20:56 mar kernel[0]: Sound assertion in AppleHDAController at line 5050
May 14 10:20:56 mar kernel[0]: wlEvent: en0 en0 Link DOWN virtIf = 0
May 14 10:20:56 mar kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving).
May 14 10:20:56 mar kernel[0]: en0::IO80211Interface::postMessage bssid changed
May 14 10:20:57 mar.local configd[17]: network changed: v4(en0-:10.12.1.10) DNS- Proxy- SMB
May 14 10:20:59 mar kernel[0]: Sound assertion - Command/Response TIMED OUT and ( kRequestStateMatch == fCodecRequest->state = 2 ), fCodecRequest->command->codec: 0xffffff802b663b00, fCodecRequest->command->verb: 0x1F0500, fPoweredDown: 1
May 14 10:20:59 mar kernel[0]: Sound assertion in AppleHDAController at line 5466
May 14 10:20:59 mar kernel[0]: Sound assertion in AppleHDAController at line 5468
May 14 10:20:59 mar kernel[0]: Sound assertion in IOHDACodecDevice at line 161
May 14 10:20:59 mar kernel[0]: Sound assertion in AppleHDANode at line 308
May 14 10:20:59 mar kernel[0]: Sound assertion in AppleHDAPathSet at line 272
May 14 10:20:59 mar kernel[0]: 66070.114904: MacAuthEvent en0 Auth result for: 00:1a:28:22:e5:88 MAC AUTH succeeded
May 14 10:20:59 mar kernel[0]: wlEvent: en0 en0 Link UP virtIf = 0
May 14 10:20:59 mar kernel[0]: AirPort: Link Up on en0
May 14 10:20:59 mar kernel[0]: en0: BSSID changed to 00:1a:28:22:e5:88
May 14 10:20:59 mar kernel[0]: en0::IO80211Interface::postMessage bssid changed
May 14 10:20:59 mar kernel[0]: AirPort: RSN handshake complete on en0
May 14 10:21:00 mar.local airportd[778]: _doAutoJoin: Already associated to “tp-link”. Bailing on auto-join.
May 14 10:21:02 --- last message repeated 1 time ---
May 14 10:21:02 mar kernel[0]: GPU hang:
May 14 10:21:02 mar kernel[0]: Trying restart GPU ...
May 14 10:21:02 mar kernel[0]: MAIN ring is stuck waiting on an event
May 14 10:21:02 mar kernel[0]: After attempt to clear wait condition = 0x0000f001 no longer waiting
May 14 10:21:02 mar.local configd[17]: network changed: v4(en0+:10.12.1.10) DNS+ Proxy+ SMB
May 14 10:21:02 mar.local UserEventAgent[11]: Captive: en0: Not probing 'tp-link' (protected network)
May 14 10:21:02 mar.local configd[17]: network changed: v4(en0!:10.12.1.10) DNS Proxy SMB
May 14 10:21:06 mar.local airportd[778]: _doAutoJoin: Already associated to “tp-link”. Bailing on auto-join.
May 14 10:21:06 mar kernel[0]: GPU hang:
May 14 10:21:06 mar kernel[0]: Trying restart GPU ...
May 14 10:21:06 mar kernel[0]: MAIN ring is NOT waiting on an event
May 14 10:21:06 mar kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
May 14 10:21:06 mar kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000300
May 14 10:21:06 mar kernel[0]: AppleCamIn::wakeEventHandlerThread
May 14 10:21:06 mar kernel[0]: en0: BSSID changed to 00:1a:28:22:e5:88
May 14 10:21:07 mar.local ReportCrash[2144]: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
May 14 10:21:07 mar.local WindowServer[101]: Created shield window 0xcef for display 0x003f003c
May 14 10:21:07 mar.local WindowServer[101]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7f91c3e62b00(2004), shield 0x7f91c5133e00(2001), lock state 3
May 14 10:21:07 mar.local WindowServer[101]: handle_will_sleep_auth_and_shield_windows: err 0x0
May 14 10:21:08 mar.local ReportCrash[2144]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
May 14 10:21:08 mar.local ReportCrash[2144]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
May 14 10:21:08 mar.local ReportCrash[2144]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
May 14 10:21:08 mar.local ReportCrash[2144]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
May 14 10:21:08 mar.local ReportCrash[2144]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
May 14 10:21:08 mar.local ReportCrash[2144]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
May 14 10:21:08 mar.local ReportCrash[2144]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
May 14 10:21:08 mar.local ReportCrash[2144]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
May 14 10:21:08 mar.local ReportCrash[2144]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
May 14 10:21:08 mar.local ReportCrash[2144]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
May 14 10:21:08 mar com.apple.launchd[1] (com.apple.loginwindow[56]): Job appears to have crashed: Abort trap: 6
May 14 10:21:08 mar.local coreservicesd[31]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyBringForwardRequest to notificationID=101
May 14 10:21:08 mar.local coreservicesd[31]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=123
May 14 10:21:08 mar.local coreservicesd[31]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=127
May 14 10:21:08 mar.local coreservicesd[31]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=100
May 14 10:21:08 mar.local coreservicesd[31]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=138
May 14 10:21:08 mar.local Dock[267]: Lost connection with usernoted.
May 14 10:21:08 mar.local UserEventAgent[11]: Captive: [UserAgentDied:139] User Agent @port=16139 Died
May 14 10:21:08 mar com.apple.launchd.peruser.501[231] ([0x0-0x11011].com.apple.iTunesHelper[298]): Exited with code: 1
May 14 10:21:08 mar com.apple.launchd.peruser.501[231] (com.apple.Dock.agent[267]): Exited with code: 1
May 14 10:21:08 mar.local coreservicesd[31]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=174
May 14 10:21:08 mar.local coreservicesd[31]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyChildDeath to notificationID=164
May 14 10:21:08 mar.local PhotoStreamAgent[275]: Check-in to the service com.apple.usernoted.client failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
May 14 10:21:08 mar.local imagent[284]: Quit - notifying about shutdown
May 14 10:21:08 mar.local imagent[284]: Quit - shutting down daemon
May 14 10:21:08 mar.local login[881]: DEAD_PROCESS: 881 ttys001
May 14 10:21:08 mar.local login[337]: DEAD_PROCESS: 337 ttys000
May 14 10:21:08 mar.local loginwindow[2146]: Login Window Application Started
May 14 10:21:09 mar.local ReportCrash[2144]: Saved crash report for loginwindow[56] version 8.3 (8.3) to /Library/Logs/DiagnosticReports/loginwindow_2014-05-14-289012_mar.crash
May 14 10:21:12 mar kernel[0]: AppleCamIn::handleWakeEvent_gated
May 14 10:21:12 mar kernel[0]: AppleCamIn::acpiControlS2ChipPower - powerState=0, status = 0x0, result_value = 0x0
May 14 10:21:12 mar kernel[0]: GPU hang:
May 14 10:21:12 mar kernel[0]: Trying restart GPU ...
May 14 10:21:12 mar kernel[0]: MAIN ring is NOT waiting on an event
May 14 10:21:13 mar kernel[0]: EDID CEA Extensions not valid for audio. [Checksum]
May 14 10:21:13 mar.local WindowServer[101]: Received display connect changed for display 0x3f003c
May 14 10:21:13 mar.local WindowServer[101]: Created shield window 0xcf0 for display 0x04273c80
May 14 10:21:13 mar.local WindowServer[101]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7f91c3e62b00(2002), shield 0x7f91c5133e00(2001), lock state 3
May 14 10:21:13 mar.local WindowServer[101]: handle_will_sleep_auth_and_shield_windows: err 0x0
May 14 10:21:13 mar.local WindowServer[101]: Received display connect changed for display 0x2b287dcd
May 14 10:21:13 mar.local WindowServer[101]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7f91c3e62b00(2002), shield 0x7f91c5133e00(2001), lock state 3
May 14 10:21:13 mar.local WindowServer[101]: handle_will_sleep_auth_and_shield_windows: err 0x0
May 14 10:21:13 mar.local WindowServer[101]: Received display connect changed for display 0x3f003e
May 14 10:21:13 mar.local WindowServer[101]: dict count after removing entry for window 0x37 is 0
May 14 10:21:13 mar.local WindowServer[101]: CGXRestartSessionWorkspace: session workspace exited for session 256 (on console)
May 14 10:21:13 mar.local WindowServer[101]: Session 256 released (1 references)
May 14 10:21:13 mar.local WindowServer[101]: Session 256 released (0 references)
May 14 10:21:13 mar.local WindowServer[101]: loginwindow connection closed; closing server.
May 14 10:21:13 mar.local firefox[2046]: CGSGetNextEventRecord (Inline) connection 0xb6f3, 16384 bytes
May 14 10:21:13 mar.local firefox[2046]: CGSShutdownServerConnections: Detaching application from window server
May 14 10:21:13 mar.local firefox[2046]: CGSDisplayServerShutdown: Detaching display subsystem from window server
May 14 10:21:13 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:13 mar.local firefox[2046]: HIToolbox: received notification of WindowServer event port death.
May 14 10:21:13 mar.local firefox[2046]: port matched the WindowServer port created in BindCGSToRunLoop
May 14 10:21:13 mar.local firefox[2046]: kCGErrorRangeCheck: On-demand launch of the Window Server is allowed for root user only.
May 14 10:21:13 mar.local firefox[2046]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 14 10:21:13 mar.local firefox[2046]: kCGErrorRangeCheck: On-demand launch of the Window Server is allowed for root user only.
May 14 10:21:13 mar.local firefox[2046]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 --- last message repeated 18 times ---
May 14 10:21:13 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 mar.local WindowServer[2148]: Server is starting up
May 14 10:21:13 mar.local WindowServer[2148]: Session 256 retained (2 references)
May 14 10:21:13 mar.local WindowServer[2148]: Session 256 released (1 references)
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:13 mar.local WindowServer[2148]: Session 256 retained (2 references)
May 14 10:21:13 mar.local WindowServer[2148]: init_page_flip: page flip mode is on
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 --- last message repeated 1 time ---
May 14 10:21:13 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 mar.local WindowServer[2148]: mux_initialize: Couldn't find any matches
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:13 mar.local WindowServer[2148]: GLCompositor enabled for tile size [256 x 256]
May 14 10:21:13 mar.local WindowServer[2148]: CGXGLInitMipMap: mip map mode is on
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 --- last message repeated 1 time ---
May 14 10:21:13 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 mar.local WindowServer[2148]: WSMachineUsesNewStyleMirroring: true
May 14 10:21:13 mar.local WindowServer[2148]: MPServiceForDisplayDevice: Invalid device alias (0)
May 14 10:21:13 mar.local WindowServer[2148]: Display 0x5b81908d: GL mask 0x2; bounds (0, 0)[1920 x 1080], 16 modes available
Main, Active, on-line, enabled, Vendor 756e6b6e, Model 717, S/N 5618130e, Unit 1, Rotation 0
UUID 0x756e6b6e000007175618130e00000000
May 14 10:21:13 mar.local WindowServer[2148]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff1272e91b
May 14 10:21:13 mar.local WindowServer[2148]: Display 0x04273c80: GL mask 0x1; bounds (-1366, 0)[1366 x 768], 10 modes available
Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cf2, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cf2000000000b828667
May 14 10:21:13 mar.local WindowServer[2148]: Created shield window 0x5 for display 0x5b81908d
May 14 10:21:13 mar.local WindowServer[2148]: Created shield window 0x6 for display 0x003f003e
May 14 10:21:13 mar.local WindowServer[2148]: Created shield window 0x7 for display 0x04273c80
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:13 mar.local WindowServer[2148]: Display 0x5b81908d: GL mask 0x2; bounds (0, 0)[1920 x 1080], 16 modes available
Main, Active, on-line, enabled, Vendor 756e6b6e, Model 717, S/N 5618130e, Unit 1, Rotation 0
UUID 0x756e6b6e000007175618130e00000000
May 14 10:21:13 mar.local WindowServer[2148]: Display 0x003f003e: GL mask 0x4; bounds (2944, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff1272e91b
May 14 10:21:13 mar.local WindowServer[2148]: Display 0x04273c80: GL mask 0x1; bounds (-1366, 0)[1366 x 768], 10 modes available
Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cf2, S/N 0, Unit 0, Rotation 0
UUID 0x0000061000009cf2000000000b828667
May 14 10:21:13 mar.local WindowServer[2148]: CGXPerformInitialDisplayConfiguration
May 14 10:21:13 mar.local WindowServer[2148]: Display 0x5b81908d: MappedDisplay Unit 1; Vendor 0x756e6b6e Model 0x717 S/N 372032402 Dimensions 0.00 x 0.00; online enabled, Bounds (0,0)[1920 x 1080], Rotation 0, Resolution 1
May 14 10:21:13 mar.local WindowServer[2148]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
May 14 10:21:13 mar.local WindowServer[2148]: Display 0x04273c80: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cf2 S/N 0 Dimensions 10.08 x 5.67; online enabled built-in, Bounds (-1366,0)[1366 x 768], Rotation 0, Resolution 1
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 mar.local WindowServer[2148]: GLCompositor: GL renderer id 0x01024500, GL mask 0x00000007, accelerator 0x00004093, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
May 14 10:21:13 mar.local WindowServer[2148]: GLCompositor: GL renderer id 0x01024500, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 mar.local loginwindow[2146]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
May 14 10:21:13 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 --- last message repeated 1 time ---
May 14 10:21:13 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 --- last message repeated 2 times ---
May 14 10:21:13 mar.local WindowServer[2148]: Created shield window 0x8 for display 0x5b81908d
May 14 10:21:13 mar.local WindowServer[2148]: Display 0x5b81908d: MappedDisplay Unit 1; ColorProfile { 2, "Display"}; TransferFormula (1.229050, 1.229050, 1.229050)
May 14 10:21:13 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:13 mar.local WindowServer[2148]: Created shield window 0x9 for display 0x04273c80
May 14 10:21:13 mar.local WindowServer[2148]: Display 0x04273c80: MappedDisplay Unit 0; ColorProfile { 3, "Color LCD"}; TransferTable (256, 3)
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 --- last message repeated 1 time ---
May 14 10:21:13 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 --- last message repeated 1 time ---
May 14 10:21:13 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:13 mar.local airportd[778]: _doAutoJoin: Already associated to “tp-link”. Bailing on auto-join.
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 mar.local launchctl[2150]: com.apple.findmymacmessenger: Already loaded
May 14 10:21:13 mar.local launchctl[2150]: com.apple.store_helper: Already loaded
May 14 10:21:13 mar.local launchctl[2150]: com.apple.storeagent: Already loaded
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:13 mar.local hidd[60]: CGSShutdownServerConnections: Detaching application from window server
May 14 10:21:13 mar.local hidd[60]: CGSDisplayServerShutdown: Detaching display subsystem from window server
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 --- last message repeated 2 times ---
May 14 10:21:13 mar.local com.apple.SecurityServer[15]: Session 100091 created
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:13 mar.local loginwindow[2146]: Login Window Started Security Agent
May 14 10:21:13 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 2 times ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 mar.local SecurityAgent[2157]: MacBuddy was run = 0
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local WindowServer[2148]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x5b81908d device: 0x1010b1110 isBackBuffered: 1 numComp: 3 numDisp: 3
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 mar.local CVMServer[197]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
May 14 10:21:14 mar.local WindowServer[2148]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04273c80 device: 0x1010b1d10 isBackBuffered: 1 numComp: 3 numDisp: 3
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local CVMServer[197]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 mar.local locationd[2159]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local locationd[2159]: NOTICE,Location icon should now be in state 0
May 14 10:21:14 mar.local UserEventAgent[2152]: cannot find useragent 1102
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local CVMServer[197]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 mar.local CVMServer[197]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 mar.local SecurityAgent[2157]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
May 14 10:21:14 mar.local SecurityAgent[2157]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 2 times ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local SecurityAgent[2157]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
May 14 10:21:14 mar.local SecurityAgent[2157]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 1 time ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:14 --- last message repeated 3 times ---
May 14 10:21:14 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:14 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:15 --- last message repeated 1 time ---
May 14 10:21:15 mar.local firefox[2046]: CGSFlushWindowContentRegion: Invalid connection
May 14 10:21:15 mar.local firefox[2046]: CGSGetDisplayBounds: Invalid display 0x00000000
May 14 10:21:15 --- last message repeated 2 times ---
the loginwindow crash report:
Process: loginwindow [56]
Path: /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow
Identifier: loginwindow
Version: 8.3 (8.3)
Code Type: X86-64 (Native)
Parent Process: launchd [1]
User ID: 501
Date/Time: 2014-05-14 10:23:06.970 +0800
OS Version: Mac OS X 10.8.5 (12F45)
Report Version: 10
Sleep/Wake UUID: 307EEC64-FD66-9C42-BCF6-D66214EDAC0F
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
abort() called
Application Specific Signatures:
Graphics hardware encountered an error and was reset: 0x00000000
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x00007fff8b686212 __pthread_kill + 10
1 libsystem_c.dylib 0x00007fff86693b24 pthread_kill + 90
2 libsystem_c.dylib 0x00007fff866d7f61 abort + 143
3 libGPUSupportMercury.dylib 0x000000010fbeb456 gpusKillClient + 87
4 libGPUSupportMercury.dylib 0x000000010fbec7f5 gpusSubmitDataBuffers + 179
5 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x00000001142b8d0e IntelCommandBuffer::getNew(GLDContextRec*) + 54
6 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x00000001142b522f GenContext::prepareCommandBuffer() + 23
7 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x00000001142b8a64 intelSubmitCommands + 198
8 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x00000001142b9c2f SwapFlush(GLDContextRec*, unsigned int) + 22
9 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x00000001142b9f45 gldPresentFramebufferData + 144
10 GLEngine 0x0000000113c0181e glSwap_Exec + 110
11 com.apple.opengl 0x00007fff8ae73717 CGLFlushDrawable + 69
12 com.apple.QuartzCore 0x00007fff8b35fede view_draw(_CAView*, double, CVTimeStamp const*, bool) + 4612
13 com.apple.QuartzCore 0x00007fff8b35ec69 CAViewDraw + 174
14 com.apple.AppKit 0x00007fff8cbd8fa2 -[NSView(NSLayerKitGlue) _drawRectAsLayerTree:] + 571
15 com.apple.AppKit 0x00007fff8ca8827a -[NSView _drawRect:clip:] + 4751
16 com.apple.AppKit 0x00007fff8ca84fb3 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 3058
17 com.apple.AppKit 0x00007fff8ca85a44 -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 5763
18 com.apple.AppKit 0x00007fff8cbd3fab -[NSNextStepFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 286
19 com.apple.AppKit 0x00007fff8ca7fd6d -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 4675
20 com.apple.AppKit 0x00007fff8ca49c93 -[NSView displayIfNeeded] + 1830
21 com.apple.AppKit 0x00007fff8cbd3e64 -[NSNextStepFrame displayIfNeeded] + 84
22 com.apple.AppKit 0x00007fff8ca491cc _handleWindowNeedsDisplayOrLayoutOrUpdateConstraints + 738
23 com.apple.AppKit 0x00007fff8d014901 __83-[NSWindow _postWindowNeedsDisplayOrLayoutOrUpdateConstraintsUnlessPostingDisabled]_block_ invoke_01208 + 46
24 com.apple.CoreFoundation 0x00007fff9095c417 __CFRUNLOOP_IS_CALLING_OUT_TO_AN_OBSERVER_CALLBACK_FUNCTION__ + 23
25 com.apple.CoreFoundation 0x00007fff9095c381 __CFRunLoopDoObservers + 369
26 com.apple.CoreFoundation 0x00007fff909377b8 __CFRunLoopRun + 728
27 com.apple.CoreFoundation 0x00007fff909370e2 CFRunLoopRunSpecific + 290
28 com.apple.HIToolbox 0x00007fff91007eb4 RunCurrentEventLoopInMode + 209
29 com.apple.HIToolbox 0x00007fff91007c52 ReceiveNextEventCommon + 356
30 com.apple.HIToolbox 0x00007fff91007ae3 BlockUntilNextEventMatchingListInMode + 62
31 com.apple.AppKit 0x00007fff8ca46533 _DPSNextEvent + 685
32 com.apple.AppKit 0x00007fff8ca45df2 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 128
33 com.apple.AppKit 0x00007fff8ca3d1a3 -[NSApplication run] + 517
34 com.apple.loginwindow 0x000000010f8cbba8 0x10f8c6000 + 23464
35 libdyld.dylib 0x00007fff86b7c7e1 start + 1
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x00007fff8b686d16 kevent + 10
1 libdispatch.dylib 0x00007fff90c23dea _dispatch_mgr_invoke + 883
2 libdispatch.dylib 0x00007fff90c239ee _dispatch_mgr_thread + 54
Thread 2:: CVDisplayLink
0 libsystem_kernel.dylib 0x00007fff8b686122 __psynch_mutexwait + 10
1 libsystem_c.dylib 0x00007fff86697dcd pthread_mutex_lock + 536
2 com.apple.QuartzCore 0x00007fff8b3689e9 view_display_link(double, CVTimeStamp const*, void*) + 33
3 com.apple.QuartzCore 0x00007fff8b36893e link_callback + 244
4 com.apple.CoreVideo 0x00007fff8bb2100b CVDisplayLink::performIO(CVTimeStamp*) + 203
5 com.apple.CoreVideo 0x00007fff8bb20271 CVDisplayLink::runIOThread() + 641
6 com.apple.CoreVideo 0x00007fff8bb1ffd7 startIOThread(void*) + 148
7 libsystem_c.dylib 0x00007fff86692772 _pthread_start + 327
8 libsystem_c.dylib 0x00007fff8667f1a1 thread_start + 13
Thread 3:
0 libsystem_kernel.dylib 0x00007fff8b6866d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff86694f1c _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff86694ce3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff8667f191 start_wqthread + 13
Thread 4:: Dispatch queue: com.apple.root.default-priority
0 libsystem_c.dylib 0x00007fff866b98bc small_malloc_from_free_list + 275
1 libsystem_c.dylib 0x00007fff866b9436 szone_malloc_should_clear + 3321
2 libsystem_c.dylib 0x00007fff866ab183 malloc_zone_malloc + 71
3 libsystem_c.dylib 0x00007fff866abbd7 malloc + 41
4 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x000000011422489f USC::CMultiPoolAllocator<USC::CAllocator, USC::ISAScheduler::CMPAllocatorProfileISAScheduler>::CPoolAllocator::AllocateBl ock() + 21
5 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x0000000114224859 USC::CMultiPoolAllocator<USC::CAllocator, USC::ISAScheduler::CMPAllocatorProfileISAScheduler>::CPoolAllocator::Allocate(u nsigned long) + 59
6 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x000000011422b93f USC::ISAScheduler::CEdge::Create(USC::CMultiPoolAllocator<USC::CAllocator, USC::ISAScheduler::CMPAllocatorProfileISAScheduler>&, USC::ISAScheduler::CDagNode*, USC::ISAScheduler::CDagNode*, USC::ISAScheduler::EdgeType, unsigned int, USC::ISAScheduler::RegisterType, USC::ISAScheduler::CEdge*&) + 47
7 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x000000011422c2a6 USC::ISAScheduler::CDependenceDAG::AddEdge(USC::ISAScheduler::CDagNode*, USC::ISAScheduler::CDagNode*, USC::ISAScheduler::EdgeType, unsigned int, USC::ISAScheduler::RegisterType, unsigned int) + 242
8 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x000000011422c39e USC::ISAScheduler::CDependenceDAG::AddEdges(USC::ISAScheduler::CDagNode*, USC::ISAScheduler::CInstInfo*, USC::ISAScheduler::CRegIterator, USC::ISAScheduler::CISCDagOptLinkedList<USC::CMultiPoolAllocator<USC::CAllocato r, USC::ISAScheduler::CMPAllocatorProfileISAScheduler> >**, USC::ISAScheduler::EdgeType, USC::ISAScheduler::CDagNode**, USC::ISAScheduler::EdgeType) + 94
9 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x000000011422d673 USC::ISAScheduler::CDependenceDAG::AddNodeEdges(USC::ISAScheduler::CDagNode*, USC::ISAScheduler::CDagNode*) + 567
10 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x000000011422d140 USC::ISAScheduler::CDependenceDAG::Build() + 1074
11 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x0000000114223793 USC::ISAScheduler::CScheduler::Schedule(void const*) + 661
12 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x00000001142233dd USC::CGen4CodeGeneratorContext::LocalScheduling(USC::CShader const*, unsigned int*) + 189
13 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x00000001141948f5 USC::CGen6PixelShaderKernelProgram::Compile16(bool, bool) + 749
14 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x0000000114193aa8 USC::CGen6PixelShaderKernelProgram::Build() + 306
15 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x0000000114193931 USC::CGen6PixelShaderKernelProgram::Initialize() + 291
16 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x00000001141935ba USC::CGen6PixelShaderKernelProgram::Create(void const*, PLATFORM_STR, S3DKernelHardwareCapabilities const&, USC::CPixelShader*, USC::OPTIMIZER_LEVEL, USC::SIMD_LEVEL, USC::SGen6PixelShaderKernelProgramCacheKey const*, USC::CGen6PixelShaderKernelProgram*&) + 434
17 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x0000000114198484 USC::CPixelShader::Compile(USC::OPTIMIZER_LEVEL, USC::SIMD_LEVEL, USC::SPixelShaderCompileTimeOptions const&, USC::SPixelShaderDrawTimeData const&, USC::SCompilerOutputPixelShader_Gen7*&) + 758
18 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x00000001140abcdc USC::CompilePixelShaderOpenGL(void*, USC::OPTIMIZER_LEVEL, USC::SIMD_LEVEL, USC::SCompilerInputStatePixelShaderOpenGL const*, USC::SCompilerOutputPixelShaderOpenGL_Gen7*&) + 890
19 com.apple.driver.AppleIntelHD5000GraphicsGLDriver 0x000000011434c9b9 __Compile_block_invoke_0 + 53
20 libdispatch.dylib 0x00007fff90c24f01 _dispatch_call_block_and_release + 15
21 libdispatch.dylib 0x00007fff90c210b6 _dispatch_client_callout + 8
22 libdispatch.dylib 0x00007fff90c221fa _dispatch_worker_thread2 + 304
23 libsystem_c.dylib 0x00007fff86694cdb _pthread_wqthread + 404
24 libsystem_c.dylib 0x00007fff8667f191 start_wqthread + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000000 rbx: 0x0000000000000006 rcx: 0x00007fff50335c78 rdx: 0x0000000000000000
rdi: 0x0000000000000707 rsi: 0x0000000000000006 rbp: 0x00007fff50335ca0 rsp: 0x00007fff50335c78
r8: 0x00007fff75d01278 r9: 0x0000000000000010 r10: 0x0000000020000000 r11: 0x0000000000000206
r12: 0x0000000000000002 r13: 0x00007ff8eb82dfe0 r14: 0x00007fff75d02180 r15: 0x00007ff8eb82a800
rip: 0x00007fff8b686212 rfl: 0x0000000000000206 cr2: 0x00007fff75cfaff0
Logical CPU: 0
Binary Images:
0x10f8c6000 - 0x10f958ff7 com.apple.loginwindow (8.3 - 8.3) <AB3B6690-DF7F-32E1-84CB-3102AC24E5E5> /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow
0x10fa1c000 - 0x10fa1dfff com.apple.heimdalodpac (10.8 - 198) <AE9D93D6-C970-368B-A89C-2DA0EB225204> /System/Library/KerberosPlugins/KerberosFrameworkPlugins/heimdalodpac.bundle/Co ntents/MacOS/heimdalodpac
0x10fa26000 - 0x10fa28fff com.apple.KerberosHelper.LKDCLocate (4.0 - 1.0) <6276FDFA-EB44-374C-9BFC-2AB5F68F2145> /System/Library/KerberosPlugins/KerberosFrameworkPlugins/LKDCLocate.bundle/Cont ents/MacOS/LKDCLocate
0x10fa2c000 - 0x10fa2dff7 com.apple.kerberos.reachability (3.0 - 2.0) <C1D06251-8E52-36F4-B309-D4DA4DEA02FF> /System/Library/KerberosPlugins/KerberosFrameworkPlugins/Reachability.bundle/Co ntents/MacOS/Reachability
0x10fa31000 - 0x10fa32ff7 com.apple.kerberos.sckerberosconfig (3.0 - 1) <D853071E-46AC-3475-B1FE-93BAD3C13617> /System/Library/KerberosPlugins/KerberosFrameworkPlugins/SCKerberosConfig.bundl e/Contents/MacOS/SCKerberosConfig
0x10fa89000 - 0x10fa89fff pam_self.so.2 (135.1) <4303A0B2-BDA1-3105-93D9-40570F115550> /usr/lib/pam/pam_self.so.2
0x10fa8f000 - 0x10fa8ffff pam_deny.so.2 (20) <FB097173-E842-3909-8F3E-67CCA412489C> /usr/lib/pam/pam_deny.so.2
0x10fb26000 - 0x10fb26fff pam_group.so.2 (135.1) <E2644A5A-33D1-3377-A180-4D1CA9F808F3> /usr/lib/pam/pam_group.so.2
0x10fb2c000 - 0x10fb31fff pam_krb5.so.2 (135.1) <DDB17329-C4EE-3467-9B0E-76F29C1D1A8C> /usr/lib/pam/pam_krb5.so.2
0x10fb37000 - 0x10fb3afff pam_opendirectory.so.2 (135.1) <2C62DFD6-E17E-3947-9596-3969D439F339> /usr/lib/pam/pam_opendirectory.so.2
0x10fbdd000 - 0x10fbe2fff com.apple.IOAccelerator (74.15 - 74.15) <D8C40179-4A29-3401-9B35-6E61EA278D41> /System/Library/PrivateFrameworks/IOAccelerator.framework/Versions/A/IOAccelera tor
0x10fbea000 - 0x10fbf6fff libGPUSupportMercury.dylib (8.10.1) <1DE2D7F9-C031-3BBF-BD5F-4E1208B6F296> /System/Library/PrivateFrameworks/GPUSupport.framework/Versions/A/Libraries/lib GPUSupportMercury.dylib
0x10fc02000 - 0x10fc0bfe7 libcldcpuengine.dylib (2.2.16) <B6E3B14B-1EAC-3FDD-8AED-87231A033BED> /System/Library/Frameworks/OpenCL.framework/Versions/A/Libraries/libcldcpuengin e.dylib
0x110e4e000 - 0x110e62fff com.apple.DisplayServices (2.7.2 - 357) <523E7F24-1DB4-3898-8DAB-4A809F03C445> /System/Library/LoginPlugins/DisplayServices.loginPlugin/Contents/MacOS/Display Services
0x110e74000 - 0x110e7bfff com.apple.DFSLoginPlugin (2.3 - 2.3) <49317E74-9FC6-323D-8CD1-26E1EFBECF04> /System/Library/LoginPlugins/FSDisconnect.loginPlugin/Contents/MacOS/FSDisconne ct
0x110ef9000 - 0x110f26ff7 com.apple.BezelServices (237.2 - 237.2) <C6D587A2-3433-3B70-A0C5-372337877D82> /System/Library/LoginPlugins/BezelServices.loginPlugin/Contents/MacOS/BezelServ ices
0x110f3e000 - 0x110f43fff com.apple.BezelServicesFW (237.2 - 237.2) <23497F21-5621-3CB4-8350-3EAC86BA000E> /System/Library/PrivateFrameworks/BezelServices.framework/Versions/A/BezelServi ces
0x110f4a000 - 0x110f4cfff com.apple.framework.machinesettings (11.0 - 11.0) <B26DDE52-4495-3B0B-9602-8CC65F764646> /System/Library/PrivateFrameworks/MachineSettings.framework/Versions/A/MachineS ettings
0x110f52000 - 0x110f5fff7 com.apple.iokit.IOHIDLib (1.8.1 - 1.8.1) <59A22950-7AC0-349F-89F1-1196B44BF296> /System/Library/Extensions/IOHIDFamily.kext/Contents/PlugIns/IOHIDLib.plugin/Co ntents/MacOS/IOHIDLib
0x110f8e000 - 0x110fb9fff GLRendererFloat (8.10.1) <055EC8E7-2D7E-370C-96AD-DBEEDB106927> /System/Library/Frameworks/OpenGL.framework/Resources/GLRendererFloat.bundle/GL RendererFloat
0x110ff0000 - 0x110ff4fff com.apple.ServerInformation (1.2 - 1) <5AC80E5E-3B55-3784-854D-1D49A874E775> /System/Library/PrivateFrameworks/ServerInformation.framework/Versions/A/Server Information
0x1116be000 - 0x1116beff9 +cl_kernels (???) <46B442A3-E70F-4BDE-B1B4-C622D1D9C3E3> cl_kernels
0x113155000 - 0x113155ff1 +cl_kernels (???) <20B83F0C-677B-494B-9F55-258CE5E4E743> cl_kernels
0x113bec000 - 0x113daafff GLEngine (8.10.1) <1BD4D913-CE6C-3389-B4E1-FC7352E4C23F> /System/Library/Frameworks/OpenGL.framework/Resources/GLEngine.bundle/GLEngine
0x113de1000 - 0x113f51fff libGLProgrammability.dylib (8.10.1) <3E488CEF-5751-3073-B8EE-0B4CA39CB6AB> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
0x113f89000 - 0x11440aff7 com.apple.driver.AppleIntelHD5000GraphicsGLDriver (8.16.76 - 8.1.6) <6BD6CE4E-681E-3242-8463-B3C9D919EDA0> /System/Library/Extensions/AppleIntelHD5000GraphicsGLDriver.bundle/Contents/Mac OS/AppleIntelHD5000GraphicsGLDriver
0x115277000 - 0x11530dff7 unorm8_rgba.dylib (2.2.16) <853BEBC4-AED9-3CE2-B91D-3D666E7C7C8F> /System/Library/Frameworks/OpenCL.framework/Versions/A/Libraries/ImageFormats/u norm8_rgba.dylib
0x11532c000 - 0x1153c6ff7 unorm8_bgra.dylib (2.2.16) <5D62BED8-DF5D-3C51-94B4-57368FF10DDB> /System/Library/Frameworks/OpenCL.framework/Versions/A/Libraries/ImageFormats/u norm8_bgra.dylib
0x1156ca000 - 0x1156cffff com.apple.audio.AppleHDAHALPlugIn (2.4.7 - 2.4.7fc4) <EA592C9E-AD15-3DD0-85BE-D47BBBE04286> /System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAHALPlugIn.bun dle/Contents/MacOS/AppleHDAHALPlugIn
0x7fff6f4c6000 - 0x7fff6f4fa94f dyld (210.2.3) <8958FE97-5830-3928-BC38-23136E7D3783> /usr/lib/dyld
0x7fff85c8b000 - 0x7fff85c8ffff libGIF.dylib (852) <326C48F1-C892-3AF9-94BC-32768EFF6731> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x7fff85c90000 - 0x7fff85ca6fff com.apple.MultitouchSupport.framework (237.4 - 237.4) <0F7FEE29-161B-3D8E-BE91-308CBD354461> /System/Library/PrivateFrameworks/MultitouchSupport.framework/Versions/A/Multit ouchSupport
0x7fff85ca7000 - 0x7fff85caefff libcopyfile.dylib (89) <876573D0-E907-3566-A108-577EAD1B6182> /usr/lib/system/libcopyfile.dylib
0x7fff85caf000 - 0x7fff85cbaff7 com.apple.bsd.ServiceManagement (2.0 - 2.0) <C12962D5-85FB-349E-AA56-64F4F487F219> /System/Library/Frameworks/ServiceManagement.framework/Versions/A/ServiceManage ment
0x7fff85cbb000 - 0x7fff85d61ff7 com.apple.CoreServices.OSServices (557.6 - 557.6) <E91B0882-E75C-30E9-8DCD-7A0EEE4405CC> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x7fff85d62000 - 0x7fff85d87ff7 libc++abi.dylib (26) <D86169F3-9F31-377A-9AF3-DB17142052E4> /usr/lib/libc++abi.dylib
0x7fff85d88000 - 0x7fff85d8afff libCVMSPluginSupport.dylib (8.10.1) <F0239392-E0CB-37D7-BFE2-D6F5D42F9196> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCVMSPluginS upport.dylib
0x7fff85d8b000 - 0x7fff85dceff7 com.apple.bom (12.0 - 192) <0BF1F2D2-3648-36B7-BE4B-551A0173209B> /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
0x7fff85e2a000 - 0x7fff85e52fff libJPEG.dylib (852) <4E159C31-1B41-3EFF-89EC-3F7BC9053F2C> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x7fff85e53000 - 0x7fff85fa5fff com.apple.audio.toolbox.AudioToolbox (1.9.2 - 1.9.2) <DC5F3D1B-036A-37DE-BC24-7636DC95EA1C> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x7fff85fee000 - 0x7fff863e5fff libLAPACK.dylib (1073.4) <D632EC8B-2BA0-3853-800A-20DA00A1091C> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x7fff86449000 - 0x7fff86466ff7 com.apple.openscripting (1.3.6 - 148.3) <C008F56A-1E01-3D4C-A9AF-97799D0FAE69> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x7fff86467000 - 0x7fff864a2fff com.apple.LDAPFramework (2.4.28 - 194.5) <7E4F2C08-0010-34AE-BC46-149B7EE8A0F5> /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP
0x7fff8654d000 - 0x7fff8655bfff libcommonCrypto.dylib (60027) <BAAFE0C9-BB86-3CA7-88C0-E3CBA98DA06F> /usr/lib/system/libcommonCrypto.dylib
0x7fff8655c000 - 0x7fff86570fff com.apple.speech.synthesis.framework (4.1.12 - 4.1.12) <94EDF2AB-809C-3D15-BED5-7AD45B2A7C16> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x7fff86571000 - 0x7fff86572fff libDiagnosticMessagesClient.dylib (8) <8548E0DC-0D2F-30B6-B045-FE8A038E76D8> /usr/lib/libDiagnosticMessagesClient.dylib
0x7fff8658d000 - 0x7fff8660cff7 com.apple.securityfoundation (6.0 - 55115.4) <9291CE2A-37D9-39DF-956E-7B2650A9F3B0> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x7fff8663a000 - 0x7fff8663bfff liblangid.dylib (116) <864C409D-D56B-383E-9B44-A435A47F2346> /usr/lib/liblangid.dylib
0x7fff8663c000 - 0x7fff8667dff7 com.apple.framework.corewlankit (2.0.2 - 202.11) <5B9D1E57-DA1D-3BF3-BB4E-87D4AF28A919> /System/Library/PrivateFrameworks/CoreWLANKit.framework/Versions/A/CoreWLANKit
0x7fff8667e000 - 0x7fff8674aff7 libsystem_c.dylib (825.40.1) <543B05AE-CFA5-3EFE-8E58-77225411BA6B> /usr/lib/system/libsystem_c.dylib
0x7fff86774000 - 0x7fff8680efff libvMisc.dylib (380.10) <A7F12764-A94C-36EB-88E0-F826F5AF55B4> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x7fff868c0000 - 0x7fff868c4ff7 com.apple.CommonPanels (1.2.5 - 94) <AAC003DE-2D6E-38B7-B66B-1F3DA91E7245> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x7fff86900000 - 0x7fff8699eff7 com.apple.ink.framework (10.8.2 - 150) <3D8D16A2-7E01-3EA1-B637-83A36D353308> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x7fff8699f000 - 0x7fff86a07ff7 libc++.1.dylib (65.1) <20E31B90-19B9-3C2A-A9EB-474E08F9FE05> /usr/lib/libc++.1.dylib
0x7fff86a66000 - 0x7fff86b71fff libFontParser.dylib (84.6) <96C42E49-79A6-3475-B5E4-6A782599A6DA> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontParser.dylib
0x7fff86b72000 - 0x7fff86b79fff libGFXShared.dylib (8.10.1) <B4AB9480-2CDB-34F8-8D6F-F5A2CFC221B0> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGFXShared.d ylib
0x7fff86b7a000 - 0x7fff86b7dff7 libdyld.dylib (210.2.3) <F59367C9-C110-382B-A695-9035A6DD387E> /usr/lib/system/libdyld.dylib
0x7fff86b7f000 - 0x7fff86e96ff7 com.apple.CoreServices.CarbonCore (1037.6 - 1037.6) <1E567A52-677F-3168-979F-5FBB0818D52B> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x7fff86e97000 - 0x7fff87827627 com.apple.CoreGraphics (1.600.0 - 333.1) <C085C074-7260-3C3D-90C6-A65D3CB2BD41> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x7fff87828000 - 0x7fff87874ff7 libauto.dylib (185.4) <AD5A4CE7-CB53-313C-9FAE-673303CC2D35> /usr/lib/libauto.dylib
0x7fff87875000 - 0x7fff87b46ff7 com.apple.security (7.0 - 55179.16) <BD03EB7E-1745-34B9-8DBA-7A2215D9F2FB> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x7fff87b47000 - 0x7fff87c21fff com.apple.backup.framework (1.4.3 - 1.4.3) <6B65C44C-7777-3331-AD9D-438D10AAC777> /System/Library/PrivateFrameworks/Backup.framework/Versions/A/Backup
0x7fff87c22000 - 0x7fff87c73ff7 com.apple.SystemConfiguration (1.12.2 - 1.12.2) <581BF463-C15A-363B-999A-E830222FA925> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x7fff87c74000 - 0x7fff88091fff FaceCoreLight (2.4.1) <DDAFFD7A-D312-3407-A010-5AEF3E17831B> /System/Library/PrivateFrameworks/FaceCoreLight.framework/Versions/A/FaceCoreLi ght
0x7fff88092000 - 0x7fff88092ffd com.apple.audio.units.AudioUnit (1.9.2 - 1.9.2) <6D314680-7409-3BC7-A807-36341411AF9A> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x7fff88093000 - 0x7fff88190fff libsqlite3.dylib (138.1) <ADE9CB98-D77D-300C-A32A-556B7440769F> /usr/lib/libsqlite3.dylib
0x7fff88191000 - 0x7fff881caff7 libssl.0.9.8.dylib (47.2) <46DF85DC-18FB-3108-91F6-52AE3EBF2347> /usr/lib/libssl.0.9.8.dylib
0x7fff881cb000 - 0x7fff881d9ff7 libkxld.dylib (2050.48.12) <B8F7ED1F-CF84-3777-9183-0A1C513DF81F> /usr/lib/system/libkxld.dylib
0x7fff88217000 - 0x7fff88217fff com.apple.Cocoa (6.7 - 19) <1F77945C-F37A-3171-B22E-F7AB0FCBB4D4> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x7fff882cc000 - 0x7fff882daff7 libsystem_network.dylib (77.10) <0D99F24E-56FE-380F-B81B-4A4C630EE587> /usr/lib/system/libsystem_network.dylib
0x7fff8863d000 - 0x7fff8899cfff com.apple.Foundation (6.8 - 945.19) <C98E55BA-553B-314B-B056-849FFB20C220> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff8899d000 - 0x7fff889d7ff7 com.apple.GSS (3.0 - 2.0) <423BDFCC-9187-3F3E-ABB0-D280003EB15E> /System/Library/Frameworks/GSS.framework/Versions/A/GSS
0x7fff889d8000 - 0x7fff88af8fff com.apple.desktopservices (1.7.4 - 1.7.4) <ED3DA8C0-160F-3CDC-B537-BF2E766AB7C1> /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x7fff88af9000 - 0x7fff88b1bff7 libxpc.dylib (140.43) <70BC645B-6952-3264-930C-C835010CCEF9> /usr/lib/system/libxpc.dylib
0x7fff88b1c000 - 0x7fff88b1cfff com.apple.vecLib (3.8 - vecLib 3.8) <6CBBFDC4-415C-3910-9558-B67176447789> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x7fff88b1d000 - 0x7fff88b30ff7 com.apple.LangAnalysis (1.7.0 - 1.7.0) <2F2694E9-A7BC-33C7-B4CF-8EC907DF0FEB> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x7fff88b31000 - 0x7fff88b7aff7 com.apple.DiskManagement (5.3.1 - 680) <5438A1FF-B92C-3D28-A8E4-FB41F03144C2> /System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/DiskManag ement
0x7fff88f12000 - 0x7fff88f12fff com.apple.Accelerate (1.8 - Accelerate 1.8) <878A6E7E-CB34-380F-8212-47FBF12C7C96> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x7fff88f70000 - 0x7fff88fbcfff com.apple.framework.CoreWLAN (3.4 - 340.18) <3735FB49-30C0-3B11-BE25-2ACDD96041B5> /System/Library/Frameworks/CoreWLAN.framework/Versions/AIs this only happening in Firefox?
Sounds that a screensaver is kicking in. -
External monitor stopped working after 10.6.7 update
I have a MacBook Pro, model identifier MacBookPro6,2 with an NVIDIA GeForce GT 330M.
When I updated last night from 10.6.6 to 10.6.7 I stopped being able to use my Dell S2409W external monitor.
I have tried resetting the pram, resetting the SMC, booting with extensions off.
When I plug in the cable to the external monitor the Mac screen goes blue for about 0.5 second and re-appears but nothing displays on the external monitor; a second monitor is not listed in the Display preferences and the monitor reports that it is not receiving a signal.
I don't see anything in the system.log when I plug or unplug the monitor cable (I'm not sure if I should).
At random intervals while the external monitor cable is plugged in the screen goes blue for a half second and then re-appears.
The screen does not go blue if I wiggle or flex the monitor cable.I see this in the windowserver.log after reboot, login with shift-key, and the external monitor connected.
There might be a clue here but I don't have anything to compare it to since I haven't collected these data when the external monitor was working.
I'd be curious to see the same data from the windowserver.log for somebody else with a MacBook Pro with an external monitor connected that does work.
You can view this log with the console application located: /Applications/Utilities/console.
If you are willing to share these data please reboot, and hold the shift-key down when logging in to disable extensions (thanks). If you look at the time just when the desktop appears when you end up looking at the windowserver.log you'll be able to see the windowserver starting up about 10 seconds prior to this time.
Mar 22 21:31:26 [110] Server is starting up
Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display0 : boot screen
Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display0 : display alias 0x0 valid
Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display1 : no display alias property
Mar 22 21:31:27 [110] CGXMappedDisplayStart: Display2 : display alias 0x0 valid
Mar 22 21:31:27 [110] MPFinalizeInitialization: Display 0x3f003e unit 2 alias mask 0x5
Mar 22 21:31:27 [110] MPFinalizeInitialization: Display 0x4272dc0 unit 0 alias mask 0x5
Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01022612, GL mask 0x00000003, accelerator 0x00003137, unit 0, caps 0x00000003, vram 512 MB
Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01022612, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192} extensions 0x0000000f
Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01024300, GL mask 0x00000004, accelerator 0x00003c0b, unit 2, caps 0x00000003, vram 288 MB
Mar 22 21:31:27 [110] GLCompositor: GL renderer id 0x01024300, GL mask 0x00000004, texture units 8, texture max 8192, viewport max {8192, 8192} extensions 0x0000000f
Mar 22 21:31:27 [110] agc_attach: gMux mode is dynamic
Mar 22 21:31:28 [110] CGXPerformInitialDisplayConfiguration
Mar 22 21:31:28 [110] Display 0x4272dc0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cb7 S/N 0; online enabled built-in (0,0)[1680 x 1050], Rotation 0, base addr 0x102a00000
Mar 22 21:31:28 [110] Display 0x4272dc2: MappedDisplay Unit 2; Vendor 0x610 Model 0x9cb7 S/N 0; offline enabled built-in (2704,0)[1 x 1], Rotation 0, base addr 0x113800000
Mar 22 21:31:28 [110] Display 0x3f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1; offline enabled (2705,0)[1 x 1], Rotation 0, base addr 0x102a00000
Mar 22 21:31:28 [110] Display 0x4272dc0: MappedDisplay Unit 0; ColorProfile "Color LCD" (MD5 a23cb9c96f2fd096b7a058db0d319259)
Mar 22 21:31:28 [110] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x2 not owned by caller (PID 202)
Mar 22 21:31:35 [110] kCGErrorIllegalArgument: CGXSetWindowListTags: Operation on a window 0x2 not owned by caller (PID 206) -
Mavericks Second monitor not detected after wakeup from sleep
Hi everybody,
seems like my problem is getting worse after updating to the latest Mavericks (10.9.5), but the general problem came up with upgrading to Mavericks.
I have two monitors connectet to my 3,1 MacPro with ATI Radeon HD 2600 XT 256 MB, which worked without any problems for years (since SnowLeopard).
After upgrading to Mavericks the Mac started loosing the connection to the second monitor after waking up from sleep.
At first only sporadically and then coming up more often. Some Google search showed that I wasn't alone with this problem. When I first started to find a solution for this, some of the workarounds others recommended seemed to help like resetting the PRAM, choosing another resolution with pressed alt button etc. but over time nothing really solved the problem. I only had a chance to get back my second monitor whenever the problem ocurred. Today none of these procedures seem to help, so I give it a shot with this post...maybe someone has a real solution for this (or at least can confirm exactly the same problem so that I can rule out some other reason than a buggy Mavericks?!?).
What I can rule out from trying different setups:
- It is not a problem of monitor brand (no NEC, both same model Xerox brand) nor size (both same resolution and 22")
- it is not a problem of connections and cables (switching the pluging switches the problem to the other monitor)
-> which brings me to the idea that the problem occurs with just one of the graphic cards ports. But since I have no other card available I'd like to rule out software problems before buying new hardware!
- The problem comes up only when waking up from sleep (immediately trying to reboot after the problem has ocurred brings no solution, the secon monitor stays undetected). Shutting down the Mac and booting up after a while (no specific time, but at least a couple of minutes) brings up both monitors perfectly.
- The monitrs try to get through to the Mac: when switching off the undetected monitor manually and switching it on again, it displays: No signal, going to sleep
Hope there is some help around here...this is really getting annoying!
Yours,
RayThe weird thing is that every morning, when I move my mouse to wake the computer, both displays go from black to show the desktop but the second display immediately goes back to black. Unplugging it and plugging it back in eventually works after multiple trys. Restarting the computer sometimes works but not always.
The only other major change to my computer before this started happening is that I installed Leopard.
So far I've tried setting my Macbook Pro not to go to sleep but that didn't change anything.
Should I try setting my displays not to go to sleep either? I haven't tried that because Energy Saver warned me that it could reduce the lifespan of the display. -
Trying to setup systemd user instance
Hi guys!
For the past few days I have been trying to setup systemd to run a user instance (user is 'hans'). Sadly, I have been unable to find a lot of detail in doing this, so much of my work has been trial and error. Just recently I learned about the [email protected] and also about loginctl enable-linger. However to what degree they are related to setting up a user instance, I do not know. I set the user 'hans' to 'linger' using the loginctl enable-linger hans command, however I think I might have misunderstood the significance of the command in relation to what I am trying to do.
What I want to for user 'hans' to have his own service file, i.e. irssi.service, and start/stop/enable/disable/etc that service independently of the system. I realize that I could use sudo and configure it to only allow certain commands, and more than that have individual 'system' services for each user, i.e. hansirssi.service, janeirssi.service, joeirssi.service, etc., but I don't want to have to do that unless there is no other option.
So Question 1:
Is it possible to setup up systemd user instances as I envision it? Or have I misunderstood something?
My system:
[root@ru ~]# uname -a
Linux ru 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64 GNU/Linux
The system is installed in a Proxmox virtual machine with a virtio virtual HDD and standard setup. It is a headless system. I have a complete systemd conversion as per the wiki plus polkit 0.107-2 for use with 'loginctl'.
I tried:
[root@ru ~]$ systemctl enable [email protected]
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
[root@ru ~]$ systemctl start [email protected]
[root@ru ~]# systemctl status [email protected]
[email protected] - User Manager for hans
Loaded: loaded (/usr/lib/systemd/system/[email protected]; static)
Active: active (running) since Fri, 21 Sep 2012 18:33:07 +0100; 42min ago
Main PID: 23189 (systemd)
Status: "Startup finished in 822us."
CGroup: name=systemd:/user/hans/shared
â 23190 (sd-pam)
â systemd-23189
â 23189 /usr/lib/systemd/systemd --user
And on the user account hans I confirm that the service is running:
[hans@ru ~]$ systemctl status [email protected]
[email protected] - User Manager for hans
Loaded: loaded (/usr/lib/systemd/system/[email protected]; static)
Active: active (running) since Fri, 21 Sep 2012 18:33:07 +0100; 13s ago
Main PID: 23189 (systemd)
Status: "Startup finished in 822us."
CGroup: name=systemd:/user/hans/shared
â 23190 (sd-pam)
â systemd-23189
â 23189 /usr/lib/systemd/systemd --user
But in regard to actually starting/stopping/enabling a user specific service, I keep getting this error:
[hans@ru ~]$ systemctl start dummyservice.service
Failed to issue method call: Access denied
and when I try by accessing the 'user' instance, I get the following error:
[hans@ru ~]$ systemctl --user
Failed to get D-Bus connection: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
The thing is that dbus is running:
[root@ru ~]# systemctl status dbus
dbus.service - D-Bus System Message Bus
Loaded: loaded (/usr/lib/systemd/system/dbus.service; static)
Active: active (running) since Thu, 20 Sep 2012 18:19:18 +0100; 24h ago
Main PID: 248 (dbus-daemon)
CGroup: name=systemd:/system/dbus.service
â 248 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
Sep 21 18:12:40 ru dbus-daemon[248]: dbus[248]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Sep 21 18:12:40 ru dbus[248]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Sep 21 18:17:50 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.26" (uid.../init ")
Sep 21 18:17:50 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.26" (uid=1000 pid=23167 c...n/init ")
Sep 21 18:32:46 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.31" (uid.../init ")
Sep 21 18:32:46 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.31" (uid=1000 pid=23185 c...n/init ")
Sep 21 18:35:45 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.34" (uid.../init ")
Sep 21 18:35:45 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.34" (uid=1000 pid=23195 c...n/init ")
Sep 21 18:36:06 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.35" (uid.../init ")
Sep 21 18:36:06 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.35" (uid=1000 pid=23197 c...n/init ")
Here is the full output from 'journalctl':
Sep 21 18:17:50 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.26" (uid=1000 pid=23167 comm="systemctl enable [email protected] ") interface="org.freedesktop.systemd1.Manager" member="EnableUnitFiles" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Sep 21 18:17:50 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.26" (uid=1000 pid=23167 comm="systemctl enable [email protected] ") interface="org.freedesktop.systemd1.Manager" member="EnableUnitFiles" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Sep 21 18:32:46 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.31" (uid=1000 pid=23185 comm="systemctl start [email protected] ") interface="org.freedesktop.systemd1.Manager" member="StartUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Sep 21 18:32:46 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.31" (uid=1000 pid=23185 comm="systemctl start [email protected] ") interface="org.freedesktop.systemd1.Manager" member="StartUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Sep 21 18:33:07 ru systemd[23189]: Failed to open private bus connection: Failed to connect to socket /run/user/hans/dbus/user_bus_socket: No such file or directory
Sep 21 18:35:45 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.34" (uid=1000 pid=23195 comm="systemctl start userservice ") interface="org.freedesktop.systemd1.Manager" member="StartUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Sep 21 18:35:45 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.34" (uid=1000 pid=23195 comm="systemctl start userservice ") interface="org.freedesktop.systemd1.Manager" member="StartUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Sep 21 18:36:06 ru dbus-daemon[248]: dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.35" (uid=1000 pid=23197 comm="systemctl start userservice.service ") interface="org.freedesktop.systemd1.Manager" member="StartUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Sep 21 18:36:06 ru dbus[248]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.35" (uid=1000 pid=23197 comm="systemctl start userservice.service ") interface="org.freedesktop.systemd1.Manager" member="StartUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Question 2:
Why would dbus reject the 'messages', is there something I need to configure (permissions,...?) in order to get this to work?
I suspect that it is my lacking knowledge to blame for this problem, which is why I have sought help here.
EDIT#1:
I forgot to show you what 'loginctl' was doing:
[root@ru ~]# loginctl user-status hans
hans (1000)
Since: Thu, 20 Sep 2012 18:19:18 +0100; 24h ago
State: lingering
CGroup: name=systemd:/user/hans
â shared
â 23190 (sd-pam)
â systemd-23189
â 23189 /usr/lib/systemd/systemd --user
Last edited by sunite (2012-09-21 18:17:35)I just went through the install process, read through the user-session-units doc, I was finally able to get the user instance working, no Dbus errors . However I decided to make sure and run 'dbus-monitor' within the user 'hans' and I got the following error message:
Failed to open private bus connection: Failed to connect to socket /run/user/1000/dbus/user_bus_socket: No such file or directory
I checked and there is no such file, however I checked the dbus.socket:
[root@ru user]# cat /usr/lib/systemd/user/dbus.socket
[Unit]
Description=D-Bus System Message Bus Socket
[Socket]
ListenStream=%t/dbus/user_bus_socket
And dbus.service:
[root@ru user]# dbus-monitor
Failed to open connection to session bus: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
[root@ru user]# cat /usr/lib/systemd/user/dbus.service
[Unit]
Description=D-Bus System Message Bus
Requires=dbus.socket
[Service]
ExecStart=/usr/bin/dbus-daemon --session --address=systemd: --nofork --systemd-activation
ExecReload=/usr/bin/dbus-send --print-reply --session --type=method_call --dest=org.freedesktop.DBus / org.freedesktop.DBus.ReloadConfig
and as far as I can tell everything see alright there.
EDIT#1:
I just restarted the system to see if my symlink worked for the user-session service. It did, sort of, however the following error occured during boot:
Sep 21 22:15:14 ru systemd[307]: Failed to open private bus connection: Failed to connect to socket /run/user/1000/dbus/user_bus_socket: No such file or directory
Last edited by sunite (2012-09-21 21:22:11) -
I'm trying to setup my new iphone and the Apple ID it asks for is my friends old Apple ID that she no longer has access to. How can I fix this so I can use my new phone? The first step asks for my iCloud info but then asks for my friends after I agree to the terms.
The iPhone is new, has never been used. When asked if I want to set it up as a new phone, restore from an iTunes backup, or my iCloud backup I selected iCloud. It then askes for me to sign in with my Apple ID, I then agree to the terms, then it asks for me to sign into my friends Apple ID. She and I have used each other's computers in the past so I assume this is where her information is coming from. The problem is she no longer had that email or Apple ID and has no way of gaining access to it and therefor I am unable to proceed.
I suppose my question is, how can I remove her information from mine so I can setup my new phone using iCloud. Also, I have already checked my Apple ID online and nowhere on my account is her information listed. -
Laserjet pro 200 color mfp m276nw network folder setup on PC Windows 7
I am trying and trying and trying to setup my Network Folder Setup and I either get the message that there is an error with the file path or an error with my username.
I DO NOT have a password for my username.
I have copied and pasted the file path \\OWNER-PC\Scanning
The file is definately set-up for sharing and all permissions are enabled.
I am not putting in a PIN at this time.
Can anyone help me to setup this network folder?
This question was solved.
View Solution.Hi @Username57 ,
I understand that you are having issues setting up the network folder. I will certainly do my best to help you.
I have provided a document with the steps for setting up the scan to network folder.
Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Lase...
It is usually a issue with the Network Path for the network folder created.
Create a folder anywhere on the computer.
Right click the folder and left click properties, select the Sharing tab, click the Share button, select who you want to share the folder with or everyone. On the same Sharing tab copy the Network Path. (example \\envy1730\users \Envy\desktop\networkfolder
In the embedded web server for the printer go to the Scan tab, select network folder setup, paste in the path for the network folder. Go through the wizard.
If those steps don't work then follow steps 1, 2, 3, to resolve this issue to try and get the network folder and path.
Step one: Make sure that the computer user account is password protected.
1.Click the Windows icon, then click Control Panel.
2.Click User Accounts, then select the account you used to log into the computer.
3.Click Change your Windows password, then find the user account you used to log into the computer.
•If the user account is password protected, continue to the next step.
•If the user account is not password protected, click Create a password for your account to create a password, and then continue to the next step.
Step two: Define the network location
1.Click the Windows icon, then click Control Panel.
2.Click Network and Sharing Center.
3.In the View your active networks section, click Public network under your network name. The Set Network Location window opens.
4.Select Home Network or Work Network, then click Close.
Step three: Make sure that the network sharing and discovery options are correct
1.Open the Network and Sharing Center window.
2.Click Choose homegroup and sharing options.
3.In the Share libraries and printers section, select Documents.
4.In the Other homegroup actions section, click Change advanced sharing settings.
5.In the Advanced sharing settings window, make sure that the following network options are turned on:
•Network discovery
•File sharing
•Public folder sharing (read and write access)
•Password protected sharing
6.Click Save changes.
7.Your computer network is now successfully set to complete the Scan and Fax to Network. Folder or Digital Fax to Network Folder Wizard.
One user on another post had to do the following:
There was a problem in the "advanced sharing settings window". They turned it off, the option which is after the 128 encryption, I mean the "password protected sharing".
Please let me know the outcome.
Happy New Years!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work
While trying to install my (less than 2 year old) HP6500 Wireless all-in-one software on my 3rd networked computer, the software installation went into a loop and would not complete the installation. After about an hour or so of waiting, I physically had to unplug the printer & eject the CD. Upon doing so, the printer became next to useless. The printer key pad no longer functions except when I first plug it in, and I can no longer access it from the other 2 original computers, even with USB. The HP solution center says it’s on line, until I go to print via USB, then it says it’s offline. I can hook the USB up on the Widows 7 unit and force it to print Word Office documents, but when I try to print documents on it from either Internet Explorer or Fire Fox it wants to send a Fax??? I've uninstalled and reinstalled the software 3 times on my Windows 7 unit now to no avail. Is it my printer, the printer Firmware or what? I have downloaded and run all the HP & Microsoft troubleshooting tools on the Windows 7 unit to no avail. However; HP downloads will not successfully complete on my XP unit. What should I do? Should I start over with a new wireless printer?
Totally ConfuzedRe: After trying to install 6500 Wireless all-in-one on my 3rd comp, it ceased to work
Ref: 02-23-2012 08:53 AM
12:38 AM 2/24/2012 UPDATE ON WHAT I HAVE TRIED AGAIN:
1. Power Reset on the Printer: Power off the printer. Unplug the power cable from the back of the unit. Wait 60 seconds. Replug the power cable to the printer and power it on. DONE
2. Print a test page: Follow this document to print the test page. PRINTER SCREEN SAYS IT'S PRINTING AND THE POWER LIGHT IS FLASHING LIKE IT'S BUSY, BUT NOTHING IS HAPPENING. ONLY WAY TO USE IT NOW IS TO UNPLUG IT AND START OVER. THIS HAPPENS ALL THE TIME NOW. IT WILL NOT PRINT TEST REPORTS.
3. Create a copy of the printed test page. CANNOT DO NOW - (PRINTER FREEZES UP WITH A BLINKING POWER LIGHT)
4. Print the Wireless Network Test Report (To check if there are any errors) CANNOT DO
Press the Setup button ( ). DOESN'T WORK EXCEPT MOMENTARILY...NOT LONG ENOUGH TO MAKE A SELECTION BEFORE IT HANGS AND FREEZES UP...
Press the Right Arrow button ( ) to select Network Setup, and then press the OK button. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
Press the Right Arrow button ( ) to select Wireless Network Test , and then press the OK button. The Wireless Network Test Report prints. CAN'T GET IT TO DO ANYTHING PRESSING THE OK BUTTON.
If you did not encounter any errors while performing the steps above then I think the hardware is OK. Test the software next. Let's use Windows 7 as the test platform. I DON'T THINK THE HARDWARE IS OK.
1. Download the driver from HP.com. Once it gives you the option to either Run or Save make sure to select Save and then select Desktop as the target location where it will save the file. This is just to make it easier to find it. Once it finishes downloading the file, double click it to initiate the installation process. Follow the on screen instructions until you reach the "select how you want to connect the printer" window comes up. I ALREADY HAVE 3 COPIES ON MY DESKTOP & NONE OF THEM REACT ANY DIFFERENTLY.
2. At the "select how you want to connect the printer" window select USB and then click Next (I think there is a next button). It should asks you to connect your printer but we are NOT going to do that. Place a checkmark on the option on the bottom of the window that gives you the option to bypass the connection phase of the installation. Click Next to proceed. Once the the installation process completes, restart your computer. I HAVE DONE IT BOTH WAYS BEFORE AND CANNOT GET THE INSTALLATION TO COMPLETE ON ANY OF THE 3 COMPUTERS NOW.
If you did not encounter any errors at this point then it looks like the software installation process is good. Proceed to the next test. END OF TEST FOR TONIGHT. THANKS
1. After the computer completely boots up, connect the USB cable to the printer and to the computer. The computer should detect the printer and initiate the HP installation process for it. Follow the onscreen instructions to complete the install.
2. Try printing to test functionality. -
Hi,
I wonder of anyone can help me, I am trying to setup an email account on my IPhone 4 but the accoutn won't verify. I get to the point where is says continue, cancel and details. Under the details section it gives me the error message that the server is not trusted. I am not sure what this means but I have been looking online and I think it is something to do with the primary certificate or something along those lines although I don't completely understand what that means, I hope someone can help as this is driving me crazy.
Thanks
EmmaThat message usually means that the server's Certificate has expired. You can just tap Continue and it should connect. It's a warning that you may not be connecting to the server you think you are. But if you are sure it is the right one just click Continue.
Maybe you are looking for
-
Smart view refresh versus Excel Retrieve
Good morning we are currently converting our users from the old Excel essbase add-in to the new Smartview. We are having issues with some of our users when converting. Some of them were creating retrieves in their excel tabs, HIGHLIGHTING a section,
-
Does Siebel license limits the Max task of Object Manager?
Hi, Gurus, We installed a Siebel environment on a Linux VM (Linux version el6.x86_64, Read Hat 4.4.6-4, the VM has 64g ram). The database (Oracle 11.2.0.0.1) and Oracle Http Server (ofm_webtier_linux_11.1.1.6.0_32) were also installed in the same VM.
-
PLEASE HELP....Hierarchy Node Variable
Hi All: I have a BPS Hierarchy Node Variable based on the Profit Center Hierarchy that was created in BW. The problem is when I set this variable to a node...only one profit center in this node gets displayed. Does anyone know what I am doing wrong
-
Handling paragraphs in illustrator
I have amazing difficulty in understanding how to make justified text in a text box in Illustrator (I'm currently using CS4 on Leopard). The text is modified vertically, horizontally and there is kerning, but that should not stop someone from making
-
Inter-site replication and KCC, when migrating from 2008 SP1 to 2012 R2
Hello, We have a very simple AD infrastructure, two sites. I have built out a 2012 R2 server, extended the AD schema and promoted it to a domain controller. Reviewing the existing AD replication topology, we currently have a 2008 SP1 server as a DC