Monitor Control Panel - only one option...

Hello people.
I'm using a generic 9.2.2 install on a FW drive, which boots and operates fine. I've used it on several machines, with several monitors.
I'm currently using this working installation on a Phillips 150S and the profile for it does not appear in the Monitor Control Panel.
So I'm stuck at 800x600 on a 15" display...
How do I get the Phillips profile back and run at 1024x768?
Cheers, R.

Cheers Grant - as helpful as ever mate.
Your on the money, it's an old 450 Sawtooth running dual 500's and I dropped a Gforce 4MX 32 from an MDD 867DP into it.
Restoring the standard (and unbelievably powerful) ATI Rage 128 video card restored the maximum resolution of 1024x768.
Oh well, only so much one can do - thanks again for your prompt assistance.

Similar Messages

I'm using a viewsonic 19" LCD monitor with a powermac 7100/66. The only resolution available in the monitor control panel is 640x480. The viewsonic gives me a message to use 1440x900. The mac specs state it's capable of 1152x870 @ 8 bit. Help!

I'm using a viewsonic 19" LCD monitor with a powermac 7100/66 running Mac OS 7.6.1. The only resolution available in the monitor control panel is 640x480. The viewsonic gives me a message to use 1440x900. The mac specs state it's capable of 1152x870 @ 8 bit. How can I get a higher resolution?

For unsupported resolutions, one may need to see if there are any software
solutions; maybe the minimum specs of the display are not met by an 8-bit
color specification of the video card in the computer.
Does the display support two kinds of connections, another one, plus VGA?
Could be the display needs some other support for it to work. Drivers?
VRAM? A different control panel and (third-party) software?
The limits may vary due to the VRAM on the card. With enough there, and
with a VGA connection (or supported converter to/from older Mac DB-15)
and the video graphics card with minimal supported specs will show that.
Been several years since I've run any PowerMac, & only used a variety of
Apple CRT color displays with them. Most times, they were very adequate.
A wider array of original choices appeared in the Displays control panel...
So I suspect the lack of video support in the graphics card or VRAM, to be
a player in this resolution limit you see in the control panel. A later CPU/GPU
and better hardware, later Mac OS, offered greater support for newer driver
along with better results.
There may not be a workable upgrade to a different graphic video card for
that old a vintage computer; or if there was one, to locate that now may be
a next-to-impossible mission. Was there any hints in the web site for older
Macs, the LowEndMac site, or others? Some are no longer current sites.
In any event...
Good luck & happy computing!

Have you chosen only one option button at a time

Hi...
    I have got a problem while working with the option button in screen painter.I have three option buttons. In Run time, I want to select only one option button, mean while the other two option buttons should not be selected.
~
Thank You in Advance
Roseline Christina. B

Hi,
Please check the following
To select an OptionBtn item, the item must be bound to a data source (UserDataSource or DBDataSource) using OptionBtn.DataBind
The following is the sample to add 2 option buttons and group them.
Dim optBtn As SAPbouiCOM.OptionBtn
    Dim oFrm As SAPbouiCOM.Form
    Dim oItem As SAPbouiCOM.Item
    Dim oUserdatasource As SAPbouiCOM.UserDataSource
    ' set oFrm = ..
    'Option 1
    Set oItem = oFrm.Items.Add("BD_rbRes", it_OPTION_BUTTON)
    oItem.Left = 240
    oItem.Top = 10
    oItem.Height = 16
    oItem.Width = 220
    Set optBtn = oItem.Specific
    optBtn.Caption = "Button One"
    Set oUserDataSource = oFrm.DataSources.UserDataSources.Add("BD_resDS", dt_SHORT_TEXT,1)
    optBtn.DataBind.SetBound True, , "BD_resDS"
    'Option 2
     Set oItem = oFrm.Items.Add("BD_rbPost", it_OPTION_BUTTON)
     oItem.Left = 240
     oItem.Top = 30
     oItem.Height = 16
     oItem.Width = 220
     Set optBtn = oItem.Specific
     optBtn.Caption = "Button Two"
     oItem.Visible = False
     Set optBtn = oItem.Specific
     optBtn.GroupWith ("BD_rbRes")
Hope this helps,
Vasu Natari.

Using camera accessory, I have imported photos to my iPad 3rd generation. By mistake I have imported multiple copies of same photos. Now if I want to delete additional copies I can't. It gives me only one option "Delete everywhere" instead of delete 1copy

Using camera accessory, I have imported photos to my iPad 3rd generation. By mistake I have imported multiple copies of same photos. Now if I want to delete additional copies I can't. It gives me only one option "Delete everywhere" instead of delete one by one, so that I can keep one copy of that photo.
Is there a way to delete additional copies of a photo and keeping only one?

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

Trying to use airplay mirroring on ipad air. The airplay switch does not show in control panel, only airdrop. How do i get airdrop out of the way to find airplay switch?

NO airplay switch in control panel, only air drop. How do I find airplay switch?

Unplug the Apple TV then plug it back in, do the same for your router, then reset your iPad by holding down the home and sleep buttons, waiting for the Apple logo, then let go of the buttons.

ICloud Control Panel Only Syncing One Way

I have been looking for a way to sync my information across my Outlook (exchange) calendar on work PC and iPhone 5. Came across the iCloud Control Panel and it seems to be a great solution. I installed it on the work PC and got all the iCloud calendars to show up on Outlook, but the Outlook calendar doesn't show up on my iPhone or on iCloud. Any ideas/troubleshooting tips for making the sync go both ways?
If I add a calendar event to my iCloud calendar using Outlook it shows up on my iPhone, but the Outlook calendar is not an option that I can select/view at all on iCal.

I signed out and deleted iCloud on both devices. I shut them down and restarted. Neither the iPad or the iPhone will accept my password in the Software Updates.
I can re-set up iCloud with my password and purchase Apps on both devices. It just will not accept the Software Update. I look forward to your ideas.

Trying to download icloud control panel - only getting so far. Got message: The installer encountered errors before iCloud Control Panel 2.1.2 could be configured. Your system has not been modified. To retry these operations at ltr time, pls run again.

First time on here... so not sure if doing correctly.
I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok). I only get so far - 2 times I've tried it. Keep getting message:
The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
huh?

As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
- Right click on "my computer"
- Select the "Advanced" tab
- Click on "Environment Variables"
Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
Or you may just go to a DOS Prompt and type the following commands:
1 - %temp% and hit enter
2 - %tmp% and hit enter
to both of these commands you will get a reply such as:
'c:\temp' is not recognized as an internal or external command, operable program or bath files.
So by looking at the reply you can see that my temp folder is c:\temp
The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
Hope it helps.

Despite having the File Associations in both Windows Control Panel and Firefox Options set to Windows Media Player for *.mwv files Firefox tries to open them with Foxit pdf Reader, which bombs out - what now?

Making this entry from my Linux computer which handles the situation correctly.The real situation involves only a Toshiba laptop running Windows XP.

I used this link for tiff http://www.nrl.navy.mil/content.php?P=IMAGES
QT was opening the tiff files. When going into the QT control panel Browser>Mime settings>Images-Still image files I was able to uncheck tiff, which held. I was also able to uncheck all the file types under File Types tab(Images-Still image files) in the QT control panel. However the preference would not hold. Went into Start>Set Program Access and Defaults that also was of no help.
The only way I was able to get QT to release the tiff's from the website I posted was to go into the Folder Options control panel for File Types and change the tif & tiff from QT picture viewer to windows picture and fax viewer.
So not sure why the QT control panel will not respond, there are other file types in the Folder options control panel on this computer other than tiff's that are still associated to QT, but didn't try changing them, perhaps that needs to be done?
Good post I didn't realize this before reading your post, if I come across anything further I'll post back.

I want to install apps from itunes to my ipod and manage them manually but there is only one option to do that replaces my apps on ipod with apps in my itunes library . Is there any way to install the apps without replacing them??

I want to install apps using itunes from my pc but there is only on option for doing that i.e. itunes replace the installed apps with apps on itunes. Is there any other way for doing that without replacing my apps ???

Ipod touch will sync with one computer at a time. If you sync to another then it will erase the current content and replace with content from the new computer.

Why does Safari (and other OS programs) provide only one option for launching an application?

I greatly appreciate the improvements that came with the Mavericks OS, but either I cannot figure it out, or there is more that Apple can improve. Firefox is my default browser that opens when I click a link. (I do this because I can set Firefox to private browsing, which decreases cookies, history, etc.) When I click on a link in Mail that I want to open in Safari, however, e.g., a link for GotoMeeting, I have only two options: (1) open with Firefox or (2) open in reader. It would be superb if there was at least one additional option to open the link in Safari, where it nicely integrates with Calendar and allows me to keep that event in history. It would be even better if I had more options to open other programs.
Am I missing something? Is this already an option that I have not yet discovered?
Many thanks for a great update to Mountain Lion!

You can set Safari to private browsing > Safari menu > Private browsing.

Mouse Control Panel Looses scroll options and multi-button options

Hello-
I just bought the new Magic Mouse. Once it is paired with my bluetooth the mouse works fine but the Mouse control panel looses the secondary button and scroll options. Mouse will not scroll normally or momentum scrolling. As well the Bluetooth control pane does not show mouse battery level reading, and there is no Mouse name. What's happening here??
G5 PowerMac with 10.5.8 and normal wired extended keyboard.
Thanks,
Kevin

Hi,
Good to hear it's Ok and hopefully all the malware has been removed.
All the best,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Icloud control panel not an option for me now what????

We are running and exchange server XP Pro and Outlook 2003 is all I have at work. I don't have access to Vista or Windows 7 nor outlook 2007 or 2010. All want to do is transfer my yahoo calendars to icloud calendars. From the searches I did I found I had to download the icloud control panel which I can't do becuase of hte software I am forced to run for work.
Can anyone tell me if there is a way (besides opening each yahoo event and switching it on the iphone to an icloud calendar) to transfer my yahoo calendar to an icloud calendar??

carrie_dyer wrote:
We are running and exchange server XP Pro and Outlook 2003 is all I have at work. I don't have access to Vista or Windows 7 nor outlook 2007 or 2010. All want to do is transfer my yahoo calendars to icloud calendars. From the searches I did I found I had to download the icloud control panel which I can't do becuase of hte software I am forced to run for work.
Can anyone tell me if there is a way (besides opening each yahoo event and switching it on the iphone to an icloud calendar) to transfer my yahoo calendar to an icloud calendar??
There is not, Vista or Lion are the minimum requirements, use Yahoo's sync services instead.

Dreamweaver Panels - Only one panel visible at a time, others get obscured even with Always On Top.

I have a problem with my Dreamweaver MX, and it is that I can only see one panel at a time, any other open panels get obscured. For example, with the work space maximized, and having the properties and behaviors panels open, I can only see one of the panels at the same time. If I click on any area of the work space each open panel will display and with the next click the other will display. If I make the work space smaller then the whole area of my screen, and move any open panels outside of the Dreamweaver work space, only then they will stay visible. I know this is not normal behavior, because I used to be able to see all the open panels simultaneously, with the work space maximized to use all the screen area. I went to Preferences> Panels> Always On Top, and all the checkmarks are still set, so as to keep all panels on top at all times, but this does no longer be the case. Can someone tell me what happened here, and how I can get back to being able to see all the open panels? BTW, I tried installing older version of Dreamweaver 4, and the same thing happens to both installed versions. This is extremely annoying!
Thanks. -Al.

Since I upgraded to Firefox 19 from 18.0.2, on my Windows XP (SP3) laptop, I, too, can no longer open a new window. File-->New Window does nothing; also can no longer tear off a tab and open it in a new window (it stays where it is). Also, if I right-click on a tab and select Move to New Window, nothing happens. All of these worked fine in FF 18.0.2. All of these work fine with FF 19 on Windows 7. Only an issue on my XP laptop.
After trying to open a new window, and not seeing the new window come up (and yes, I waited a long time), I decided to close my current window, which had multiple tabs open. Instead of just closing, it pops up the message reminding me that I'm about to close all those tabs. If I say close, and then go into the Task Manager, the Firefox application has disappeared (as expected), but the firefox (and plug-in container) processes are still running. So I have to manually kill the Firefox process to get it to quit. it's as if it thinks there is another Window open (the one I tried to open but never appeared). This happens every single time! I've restarted my laptop, and that does not resolve the problem.
Is there a way to downgrade back to v 18.0.2 until this is fixed?

Best for display only one option

Upgraded older mac mini to Mavericks. Previously running Lion with display at 1280x800. Now only get one setting 1024. I tried the free "Display Menu"app but same thing. Any reason for this not having more options?
Thanks, Jim
NVIDIA GeForce 9400:
Chipset Model:          NVIDIA GeForce 9400
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0861
Revision ID:          0x00b1
ROM Revision:          3362
Displays:
S/M 150MP:
Resolution:          1024 x 768 @ 85 Hz
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          H4NT105937
Main Display:          Yes
Mirror:          Off
Online:          Yes
Rotation:          Supported

Re: SQL Help

Control Panel text tool options switched places

Hello there!
Prologue: I've been searching for a solution for this problem and couldn't find any. Perhaps I don't know how to search properly. The problem itself isn't catastrophic yet it is really annoying to me, as I like to work quickly and everything has to be on its place (OCD?).
Problem: Once I opened again my InDesign (CS6 v 8.0.2) and when using Text tool, I noticed its options has changed places and I don't manage to change it back. It is hard to describe the problem in words but I uploaded the image. Hopefully this helps to solve it:
Thank you for your time!

It solved my problem! I kept trying to drag panels into their places, also checking preferences, workplace options and everything else.
I can now finally work in peace, without being confused all the time, thank you very much, Eugene.

Monitor Control Panel - only one option...

Similar Messages

Maybe you are looking for