Monitor display speed

Which is faster, HDMI to DVI or Mini Display Port to DVI?

No real difference in speed.
However, the HDMS port support less pxals than the mini-display and Thunderbolt port
supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).

Similar Messages

External Monitor display issue

The external monitor for my mac book pro displays large/wide text when both screens are open. If I shut the laptop, the external monitor display returns to a normal view. I tried going to system preferences, displays and it's either on best for display or in scaled, the maximum 1920 x 1080.
Please advise.

Where is extended display mode? In display screen, the mirrored mode is checked, both displays are in 1920 x 1080, not sure what else I can do here? BTW: it just started happening (all was normal on both screens) until I used laptop at my work and connected it to external screen (school) with VGA adaptor (at home I use a DVI).

How to use dual monitor display in windows 7 using MSTSC command.......??????

how to use dual monitor display in windows 7 using MSTSC command ....?????

Hi Anurag,
The main issue is how to use the dual monitor in the Remote Desktop Session in Windows 7 ,right ?
please refer to the following links:
Using Multiple Monitors in Remote Desktop Session
http://blogs.msdn.com/b/rds/archive/2009/07/01/using-multiple-monitors-in-remote-desktop-session.aspx
Best regards

Combined PDF page display speed difference between Acrobat 8 Pro and Acrobat X Pro

I have encountered a display speed issue with regards to combining Tiffs with Acrobat X Pro. The Tiffs are between 200 KB and 600 KB. Tested the issue by using a series of Tiffs originally combined using Acrobat 8 Pro but used Acrobat X Pro to combine them. When I open the combined PDF files using X, I can cycle through the pages of the one created using 8 significatinly faster (i.e. about as fast as I can click) but the file created using X is significately slower. Note: PDF file size is smaller using X (30.9 MB) than same combined files using 8 (46.1 MB). Any ideas on what might be causing this issue?

Found a Tips & Tricks document for Acrobat 8 which indicated the default Monochrome Compression setting for Acrobat 8 is CCITT G4. Recreated the combined PDF file from the original Tiffs using X Pro with the modified setting and works like a charm. Thanks for the point in the right direction.

CMYK images: strange monitor display & and printing

I tried the way Pages 2 handles CMYK images today and found out some strange things.
My problem: monitor display
CMYK .jpg files are displayed inverted on screen like a negative - black is white and white is black. Layouting basicly rendered useless. Is there a work arround ?
Solved: Printing
For printing there are at least two ways to get a decent result. Here my findings:
- Any color printers
"Print - ColorSync - Color Conversion" set to "Standard" => CMYK images get converted to RGB
"Print - ColorSync - Color Conversion" set to "Printer specific" => CMYK images stay in CMYK if printer is able to print CMYK
- use "Save to PDF" within printing dialog
Same as above, profiles tagged to images stay correct
- Adobe Acrobat Distiller
Same as above, but PDF looses recognizeable profile information. PDF workflow software does not recognize "SWOP" or "ISOcoated" by name but has "Embedded Adobe Postscript CRD Profile" instead which will create problems in workflow processing.
- Exporting "File - Export - PDF"
Profiles stay intact and are handled correctly.
Cube, PB 17" Mac OS X (10.4.7)

Thanks Noel for the reply. Hopefully this will help.
This is how the file should look like.
This is how the file usually displays.
Any help would be greatly appreciated.
Regards,
Ron Cecil

How do I remove a blank 1"X1" blank spot in upper left corner of monitor display?

How do I remove a blank 1"X1" spot in the upper left corner of monitor display?

What version of Pages?
What instructions? It sounds like you have got the wrong ones and are trying to delete a page in the Thumbnails, which will delete th entire section.
If you have a blank page in a Word Processing template, it is because there is some text on it, even a return, tab, space or page break:
Menu > View > Show Invisibles > backspace over whatever it is to get rid of it
Peter

Source monitor displays a different size to Program monitor in CC2014

I have imported a clip and the source monitor displays a different size in the program monitor?
Thanks Chris

It looks like your sequence is set up for the wrong size. Select a video file and right click 'New Sequence from Clip' see if that helps. I see that your video material is HD did you set up the sequence to match the earlier stills? that might be bigger than HD? If that is the case make a sequence the size for the video and use 'scale to frame size' for the stills.

Macbook pro had coffee spilled on it 2 weeks ago, all works fine except monitor display.

Macbook pro had coffee spilled on it two weeks ago; all working fine now except for the monitor, display is dim and photos not appearing properly. Any suggestions? Apple said would cost too much to repair, anyone had any luck with outside repair facilities? thanks.

I would check with HP. Your scanner may need a firmware update and updated HP software. Start here:
http://www8.hp.com/us/en/hp-search/search-results.html?qt=LaserJet+m1217nfw+MFP& cc=us&lang=en&charset=utf-8&qp=&hpn=&hpa=&hps=&hpr=&cat=&current_url=CSSres
then here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=4075472

Secondary monitor displays with colorshift

secondary monitor displays with colorshift in LR4.1rc2. this is on windows 7/64.
Both my monitors i have are calibrated with spyder3, one is hardwarecalibrated eizo CG243, the other a HP2475 calibrated with spyder4 elite software.
Colorshift shows same characteristics when i switch LR app window with secondary window.
IT looks as if sRGB profile is applied to the secondary preview, because of the strong/overly saturated colors.
It seems to me a softwarebug, which makes secondary display inusable.
How is color management supposed to work in LR4?

It works fine with me (LR4.1 RC2, but previously used RC1, LR4.0, LR3.6... all worked the same).
I have a wide-gamut HP LP2475w (approx Adobe RGB gamut) and a Samsung193P (approx sRGB). Both calibrated/profiled with Color Munki Display, but I've previously used Eye One and Spyder units. After calibration/profiling, LR main and secondary display look the same in both Loupe and Develop view, and no matter which is LR's primary display. (Obviously, colours outside sRGB gamut don't look the same!)
I've just checked, and it still seems to be the case on my set up (W7 64-bit).
I can't think what the problem might be. I guess you've checked in Control Panel / Color Management that the correct profiles are assigned to each monitor. And I guess that you've got a video card with dual LUTs that allows separate calibration (mind you, I've never come across any cards that don't have separate LUTs, but apparently there are some).
PS - Web view might be different, as I think LR uses IE for rendering in web view only, and IE doesn't colour-manage properly.

Imac 24' connecting to Apple monitor display 24" A1267

I would like to run an extended display off my IMac 24'
2.66 GHz Intel Core 2 Duo
8 GB 1067 MHz DDR3
NVIDIA GeForce 9400 256 MB
OS X 10.8.2 (12C60)
Looking to purchase Apple Monitor display, early 2009 '24 A1267
Primary question is can I run this extended display off my imac? What is needed to do so, what connections do I need to make it happen. Anything else I should know?

http://store.apple.com/us/browse/home/shop_mac/mac_accessories/displays
and many other places both online and offline

HP 7700 Desktop Power on no green light nor monitor display

Hi. I have a HP 7700 which was been working fine for months, however now unable to use. Power up and red blinking light appears, but doesn't change to green. Monitor display is same as when monitor on but of switched off. Can hear fans whirling and able to open and close disc tray! However something is up and looking for some assistance. Thanks

Hello PaulGuk,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your HP Compaq dc7700 Business PC is having issues booting up after running fine for months. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Business PCs - Compaq, Elite, Pro.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Stuck with 1024x768 resolution/monitor/display

After re-installing Snow Leopard on my friend's mac,
My screen resolution/monitor/display can only get 1024x768. System Prefs doesnt allow me other display options, they are blank.
Asked, Googled, people say it may be bad/corrupted video kext.
Is this the case?
If so how to find the folder where video kext is and
where to get the clean video kext file to replace?
Thanks so much!

Reinstall OS X, but erase the drive first. If you reinstalled over an existing but corrupted system it could cause this problem.
However, the first thing to do is: How to Rest the PRAM
Message was edited by: Kappy

Monitor display no signal input

my computer turn on but the monitor display no signal input. I plug my monitor to other computer and the screen shows my icons and everything but when I plug other monitor to my computer it say no signal input. How do I fix my computer to communicate with the monitor.

When desktop goes blank then there's no more signal from the pc.
So the monitor says 'NO SIGNAL INPUT'.
What's the problem?
V.
*** Say 'Thanks' with Kudos ***

How can I get rid of a small white square on the monitor of my apple desktop? Applications cover it, but no monitor display does.

I have seen this question asked before, but have not seen an answer that works. A small white square appears in the top left corner of the display. Open applications cover it, but not the monitor display.

Windows stuck in top left hand corner of screen

Does anyone know the status of the new CMYK monitor display Apple is developing?

Does anyone know the status of the new CMYK monitor display Apple is developing?

I have the same iMac as you but with a 1 TB hard drive.
Apple replaced the 1 TB hard drive of iMacs manufactured between October 2009 and July 2011 because of problems. When I took my iMac, the Genius gave me the bill (even if the repair was free) and the 1 TB hard drive cost about $100. This was with a 1 TB Seagate hard drive, so the cost for a 500 GB hard drive may be smaller, depending on the brand

Monitor display speed

Similar Messages

Maybe you are looking for