Monitor doesnt wake up when booting first time, have to restart - k9n ultra-2f

So, I have few problems. The main problem is in da topic:
I bought an used computer about two weeks ago. I installed windows and all drivers etc.
With the old bios (cant remember what version) all was okay except always in boot an error message was shown that said something that the proseccor could not be recognised but the processor was still shown right in My Computer.. :s
Because of that error message i decided to update bios. I updated it throught live update 3 to v.3.6 and now i dont get the processor error message but the monitor doesnt wake up in the boot.. I have to press reset button and then when the monitor wakes up there comes an error message what says something like "Warning!!! The previous performance of overclocking is failed, and the system is restored to the defauls settings". Then I press any key and windows boots normally.
I reupdated v.3.6 bios today manually from floppydisk but the problem didnt go anywhere.
I have searched this forum but cant find same kind of problem posted.
Can somebody please help me with this and tell what could be the problem?
Also when booting second time so that the monitor wakes up, i get four alert sounds.. What could those mean?
My computer is pretty powerful (amd athlon 64 5600+ x2, club3d gf 7950gt, 2gb 533mhz..) It should be very smooth and fast but it often appears slowliness and ..how can i say it.. temporary tilting? :p And the 3dmark03 benchmark gives me 19465 points, it should be giving much more. The computer is clean, no viruses or adware. What could cause this?
Sorry for the messy message and bad english and im not really good at computers

Thanks for the reply.
I didnt have this issue before updating BIOS..
And i didnt find jbat1 from my k9n ultra-2f. I didnt even find it from the mb manual. Theres only a Clear CMOS Button: SW2. I pushed it few times and then i rebooted my computer. At the first time the monitor woke up instantly and i was like wohooooo but then i shut down the computer and booted it again.. The monitor didnt wake up before pressing the reset button, the same problem was back.
I think that the SW2 button reset the bios settings like the jbat1 would do, because i had disabled the big logo at the boot and after pressing SW2 the logo was back.
Then i set the memory vcore to 2.0V but it didnt help. Infact i think the computer had come a bit more slowly.. :s I think it may be the RAM what makes my comp so slow... dunno.

Similar Messages

When i first time switch on my new laptop macbook air i had french keyboard

when i first time turn on my new macbook air i wrote my new passport. i wrote on qwerty keyboard but when i changed langues on french, i need writing everytime on "imagine french keyboard" but when i changed again langues ENGLISH this stay same...
in my pasport is letter " m" but if i writing i need push " .etc... where i can change this?
thx

Yes. The external drive containing the files should also be attached to your computer, of course. As you are new to Mac the external volumes , when mounted will show up as an icon on the Desktop on the right hand side (under the Macintosh HD icon). You can double click that and a Finder window will open for you to browse the files contained. Leave that open to one side and have iTunes open just beside it. You can now drag the files from the external and drop them onto the Device of your choice as it appears in the iTunes side bar. The Device name (for example "So & so's iPod" will get a blueish window around it; a small green circle with a "+" sign will appear letting you know that all operation can be completed. Drop away! The files will go to the correct categorization in the iPod: audio to songs; videos to movies; podcasts to podcasts and so on.
Go ahead and give it a try.

I got CS4 software. When the first time i install, i chose the normal installation content. Then I found that there was no photoshop on the start menu. After that I try to put the disk into the notebook again and find that there is no photoshop listed on

I got CS4 software. When the first time i install, i chose the normal installation content. Then I found that there was no photoshop on the start menu. After that I try to put the disk into the notebook again and find that there is no photoshop listed on the "installation list"

download the cs4 design premium installation files and install ps using them,
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I plugged my phone into my computer for the first time and it restarted my whole phone so now all my apps say waiting put I'm let my phone sync a view different times and it still doesn't work. Has anyone else had this problem?

I plugged my phone into my computer for the first time and it restarted my whole phone so now all my apps say waiting put I'm let my phone sync a view different times and it still doesn't work. Has anyone else had this problem?

Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

Satellite C660 fails to boot first time

I have a Satellite C660 - PSC0AQ-03C019 + 1B194392K
For the last year the notebook has been running fine however in the last 2 months it has had a boot issue. The first attempted boot of the day, it will not boot, it powers on gets past the boot screens past the blinking cursor top left then stalls with a blank screen (not cursor just a faint glow).
Pressing and holding the power button turning it off and then turning on again the computer will start. sometimes (not always ) it will ask to boot normally or repair.
The notebook works perfectly in use not errors not crashes. Restarting the notebook works as expected shutting down and powering on after 5 mins works fine.
If the notebook is left off for an hour it or more it will not boot the same as above. powering off and powering on the system will boot but with start normally question.
There are no errors shown in system logs
I have performed a full system reinstall from HDD recovery.
I have performed a full system reinstall from DVD recovery.
I have performed a full system reinstall from DVD on to a brand new hard drive recovery.
I have replaced the ram
I have attempted to update the bios but get an error
Bios version above 200
Battery capacity more than 10%
AC is attached

Thanks for your suggestions. Just to clarify what is happening and what I have done so far.
Every time the Satellite C660 notebook is turned on when it has been sitting turned off for more than an hour it will not boot.
Power on goes like this
The Toshiba splash screen comes up
The blinking cursor on the top left appears then disappears
The screen goes blank (noticeably on still, but blank)
No matter how long it is left it stays at this screen
The above has happens so
I press and hold the power button to turn it off
Press to turn the notebook back on - one out of three times it states the system failed to start - offering boot to safe mode or turn on normally
Pressing boot normally the computer will boot successfully
The Satellite C660 will run perfectly with no errors, failures or crashes
Reboot the Satellite C660 it will restart and boot correctly
Turn the notebook off and leave it for an hour and it will not boot.
I have scanned the original HDD and it has no errors or issues
I have performed a full system reinstall using manufacturers HDD recovery.
I have performed a full system reinstall from DVD recovery.
I have performed a full system reinstall from DVD on to a brand new hard drive recovery.
I have tested the brand new HDD no errors
I have replaced the RAM memory
There are no errors shown in system logs
I have set the BIOS to defaults
I have set the boot order to boot from HDD first
I have not been able to update the BIOS as when the Toshiba update or manual download and attempt to update the BIOS fails.
On a restart the computer boots as normal
When booting for the first time of the day or if the computer is off for an hour or more it will not boot into Windows

T400 Win7/64 Advanced Dock -- External Monitor No Longer Comes When Booting

My configuration:
T400 (2767-14U)
Windows 7 64bit
256MB ATI Radeon 3470HD (switchable graphics running in "High Performance")
Advanced Dock (2503)
Lenovo D221 Monitor (using VGA cable)
I used the above configuration without issues for a year.
My problem:
I just replaced my hard drive, clean installed the OS and all applications, and updated all drivers and the BIOS using System Update. Since doing that, my external monitor no longer comes on when I boot my computer in the dock (lid closed). The only way I can get the external monitor to work is to boot my computer first, and then "hot dock" it.
As far as I know, all of my BIOS/Power/Graphics settings are the same as always.
Thanks in advance for any help!
Solved!
Go to Solution.

Maybe the BIOS setting for Default Display got switched back to ThinkPad LCD?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Macbook pro won't wake up when booted into Windows 7

Macbook Pro (Late 2010) with Snow Leopard and Windows 7 64bit. Bootcamp 3.3
When booted into OS X, then close the lid, let the machine sleep and later, if I connect to power source and USB keyboard and mouse, and then tap keyboard, machine wakes up.
If booted into Windows 7, if I follow same sequence, the machine won't wake up. The only way I can wake the machine up is by opening the lid.
Not a big problem, but certainly an annoyance.
Can anybody help?

Did you use a geniune windows installation disc? I ask this because I worked on a computer today where someone had tried to use a Windows XP disc that came with a Dell computer. These do not work.
If it was a genuine install disc, did you get all the way through with the installation, or did something go wrong during the install?

How to avoid system slow when login first time everyday

if login system first time every day, it will be very slow for loading web application.
I think maybe it 's reload cache every night or by a certain perods of time.
how to avoid this situation. or set cache reload a time per week?
Thanks.

Terry,
I would confirm your application pools are set up as suggested in the install documentation. This should resolve your issue.
Thanks,
Drew

Invalid state when running first time after compile

Often I will compile a package body without errors.
The first time I run it, I will get the package is in an invalid state. The second time I run the package it will run fine.
What is going on?
Thanks,
goo

Hi,
Dose it happen always ? Check if any object is getting changed. Is your package doing any thing which might be altering any objects being used by the package.
thanks

HT5787 I forgot my Apple ID's question and answer because I need to use them to sign my MACBOOK apple account when i first time to use my account in MACBOOK

Hi this is my first time use my apple account at Macbook air, but they need to answer the question, the problem is I forgot to the answer and question, how can i know it?

Alternatives to Reset Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Start here to find your country, and how you can contact Apple:
         Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Support in your country and ask to speak to Account Security.
          Customer Service: Contacting Apple for support.
How to Manage your Apple ID: Manage My Apple ID

TS3297 I cannot purchase music currently as I am being asked to answer security questions due to it being " the first time have bought from this PC". This is not the case, I have not changed my PC. I have changed my passowrd and security questions but no

I cannot buy music currently as I am being asked to answer security questions due to it being supposedly "the first time I have bought form this PC". This is not the case. I have now changed my password and security questions, but it is asking me the same when I try to buy again.

First off, the name of your computer is only the way it is becuase the Apple user is the first one they created after repairing the Mac. Go into Sharing System Preferences and change the name to whatever you like.
Can you explain how you did this:
This didn't seem right so I went in to it and changed the computer so that it would recognise me as the Owner/Administrator.
You can delete the Apple user in Users & Groups System Prefs. Select that user and delete it. It will ask if you want to save the user data or delete it. If you archive it, you can always delete it later and it will be available if you need to recover that account for some reason--I doubt this will be necessary. After deleting the account, and when you feel you are still working normally, you could delete that archived user folder.
I have also never seen anything ask for that. It does sound like an Epson thing, but without having access to it, I couldn't tell you for sure.
Here's what I would try. Create a new User and give them admin rights. Log in as that user and see what happens with the installer. If it still complains, it is an Epson issue. My guess is it is looking for user id 501, the first user created. If it works, then something is indeed odd about your account. If so, use that new admin account to disable Admin privileges for your account, then re-enable it. This is done in the Users & Groups system prefs.

Help- check box on when the page is loaded first time have to show div tag

posted Yesterday 11:48 PM
Hi Friends,
I have a check box and the information of if it is checked or not comes from Actionform get, I want the div tag to be displayed when the jsp is first loaded and the check box is checked.
Can some one help me in sending the sample code for this.
with regards,
Bhargavi.

Hi Scott,
Declare a SessionBean variable to hold the unique key field value for that table. Set that value when the user clicks on the button. Use the value to select only that row on the next iterattion of the page in RowSet.setCommand statement.. You will want to do some conditional initialization for this page depending upon whether or not this seesion bean variable has been initialized.

I still have the problem with my Power Mac G3 Blue/white. Turning the power on i can hear it go thru POST but nothing every shows up on the monitor screen. Also when booting pressing the "C" or the Shift key nothing happens.

I don't get anything on the monitor screen. During startup i can hear it going thru POST but never any screen image. Any ideas?

The "C" key will work if there is a bootable volume on a disk in the optical drive. Are you running OSX? Jaguar, Panther, Tiger? On OSX (UNIX) you can use the command "S" (⌘-S) at start up to go to the root and do a file system check: Type; fsck -f -y at the prompt when it appears then press Return; let the root check for problems and repair. To exit after the test type; reboot and press Return

E7 screen doesnt wake up when imcoming call

My E7 screen remains black and unresponsive when I get a incoming call. What gives?

This happens when I receive a call with my E7 in pocket when I take out to answer I see nothing on the screen but that is only for a sec and the display comes. May be the proximity sensor is stuck or over doing its job in your E7, is the screen not returning to normal till the call gets disconnected?
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Computer won't boot first time after being powered down.

I just had my motherboard seviced because I needed the BIOS reprogrammed and MSI sent me a different board. If my computer sits in the off position for awhile.... Upon power up, the computer will freeze at the logo screen. If I push the reset button, it will boot up just fine. I have not tried to disable the logo screen, but does anyone have any ideas? Overall, I have not been happy with MSI or my 3rd "platinum" board.

Quote
Originally posted by Ruckus17
I suspect that this is the cause of the problem. I could be missing something of course, but it sounds like that the system doesn't have enough power to push the system into startup from a cold boot. This would explain why you have to use the reset button, since the system would already have power.
Well, I did not have the problem before they sent me a different board and my PSU is definitely not the problem.

Monitor doesnt wake up when booting first time, have to restart - k9n ultra-2f

Similar Messages

Maybe you are looking for