Monitor email viewing through proxy

I have a need to know if a user has used proxy rights to view individual emails. I can't seem to find any place that logs when an email has been opened (from the receiver end).
Any ideas would be very helpful.

On 6/16/2010 10:16 AM, richardgiroux wrote:
>
> I have a need to know if a user has used proxy rights to view individual
> emails. I can't seem to find any place that logs when an email has been
> opened (from the receiver end).
>
> Any ideas would be very helpful.
>
>
You cannot do that. At best you can see when he may have accessed the
mailbox.

Similar Messages

Network Device Discovery and Monitoring through Proxy Agent

Hi,
In our SCOM 2012 SP1 environment, I want to monitor an InfiniBand switch that is only connected to a physical server with a SCOM agent and a SQL PDW appliance, but not to the VLAN which the SCOM gateway server is on.
According to SCOM documentation, it seems that if a SCOM mgmt or gateway server cannot connect directly to the switch using ICMP or SNMP-related ports, then it cannot be discovered and ultimately monitored. Is this correct? Or can the discovery
occur "through" the physical server that has a SCOM agent installed with proxy enabled, which reports to the gateway server?
I guess I don't fully appreciate the purpose of allowing monitoring of network devices through proxy if the discovery cannot also be performed through proxy, if this is indeed the case.
Much thanks for any help!

Hi,
you can create new rules/monitors targeted that specific server which check necessary params of your network device.

Upgrade to 4.5 device software on Telus Pearl 8130: HTML Email viewer doesn't work

I just upgraded the software on my Telus Mobility (Canada) BlackBerry Pearl 8130 (from 4.3).
One of the main reasons I wanted to upgrade was to take advantage of the HTML email viewer (yeah! finally!).
My installation went fine, and the View Messages in HTML option is enabled (was by default, have verified it again).
On my first test email that I sent to myself from my Yahoo account to my default ISP email account, here's what happened. The Yahoo email uses a very simple "stationery" as background, consisting of two small graphic files, one in the upper left and one in the lower right. In between those two graphics is the text you wish to write. So I put the words "test test" in the text portion and sent it to myself.
When the email was received on the Pearl, indeed I saw the two graphics. However, the text was not displayed.
That was the first attempt. The second attempt produced no graphics at all.
I also tried sending myself an email using some formatting, like bold fonts, different text colors, underline and one jpg file. None of the formatting came through, and the jpg came through as an attachment (instead of in the the body of the email where it was placed). When I tried to open the jpg, by clicking on "1 Attachment", I got an error stating that it is an unrecognized file type and cannot be opened.
So it appears that the upgrade took 1 step forward and 3 backwards.
Anyone experience this, and if so, is there a fix, either now or in the works? Does RIM Support read these forums?
Telus Tech Support said that something is being done but they weren't too specific.
I have another upgrade-related question regarding Documents to Go, but I'll post that in a separate thread.
Message Edited by bwv565 on 12-16-2008 11:43 PM

hello,
about your Bluetooth problem, I suggest you one a new discussion on the decicated board called "BlackBerry Accessories". ou will find there experts about Bluetooth.
http://supportforums.blackberry.com/rim/board?board.id=accessories
about the third point : it usually takes a long time for the device to emerge after a battery pull. It's quite common, you can't do anything about it.
about the second point. In my opinion there at least one picture that is corrupted (or one index file).
in the folder containing that image, do you have many images ? Let's call that folder A.
I suggest you to move them one by one into another folder B, then scroll through the folder A.
it will certainly reset a few times, until at one point it wont' freeze, meaning the folder A does not contain the corrupted image anymore.
you then know that the last image moved from A to B is the culprit.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Re: (forte-users) HTTP request through proxy server

Daniel -
No, it does not. ;)
How do you say to HTTPRequest to go through proxy?
Thanks,
Taras
Daniel Nguyen wrote:
>
Hi,
It works very well. I have experienced this model for a distant Forte client
calling a Forte Server service Object for instance without any environment
and without TCP access (passing through firewall for instance).
It has also worked very well to make an injectot to improve Web Enterprise
and IIS using the SendRequest from HTTPAccess.
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Taras Katkov a écrit:
HTTP request through proxy server using forte HTTP library?
Any experience?
Thanks,
Taras
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com--
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

You can also use the HTTP-DC project.... You don't
need Web Enterprise for this. From what I can tell,
this is available in L.x on....
There is api documentation in M.2 (with scant
examples.)
There's a special process to put the project in your
repository (it isn't installed in the repository in
the standard install,) the documentation in M.2
(probably in M.0 too, AFAIK) that tells you how to do
this (look for HTTP-DC in the online help.)
I haven't done much with it yet, I've just installed
it. If anybody out there has examples, that'd be
great. I'll try to contribute more the moment I get a
chance to explore it....
Christopher Fury
BellSouth Communications Systems
--- Daniel Nguyen <dnguyenclub-internet.fr> wrote:
Hi,
If you have Web Enterprise, you can user
HttpAccess.SendRequest().
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
Amin, Kamran a écrit:
Is there any way to make a HTTP request from TOOLto another HTTP Service?
thanks in advance.
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. Tounsubscribe, send in a new
email the word: 'Unsubscribe' to:forte-users-requestlists.xpedior.com
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To
unsubscribe, send in a new
email the word: 'Unsubscribe' to:
forte-users-requestlists.xpedior.com
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/

ASA - cut through proxy authentication for RDP?

I know how to set this up on a router (dynamic access-list - lock and key)... But, I'm having trouble understanding how to setup OUTSIDE to INSIDE cut through proxy authentication for RDP.
OUTSIDE to INSIDE RDP is currently working.
I have 2 servers I want RDP open for..
[*]OUTSIDE 1.1.1.1 to INSIDE 10.10.70.100
[*]OUTSIDE 1.1.1.2 to INSIDE 10.10.50.200
What's required for OUTSIDE users to authenticate on the ASA before allowing port 3389 opens? I was hoping for is a way to SSH into this ASA, login with a special user, then have the ASA add a dynamic ACE on the OUTSISE interface to open 3389 for a designated time limit. Is this possible?
Here is my current config.
[code]
ASA Version 8.2(5)
hostname ASA5505
names
name 10.10.0.0 LANTraffic
name 10.10.30.0 SALES
name 10.10.40.0 FoodServices
name 10.10.99.0 Management
name 10.10.20.0 Office
name 10.10.80.0 Printshop
name 10.10.60.0 Regional
name 10.10.70.0 Servers
name 10.10.50.0 ShoreTel
name 10.10.100.0 Surveillance
name 10.10.90.0 Wireless
interface Ethernet0/0
description TO INTERNET
switchport access vlan 11
interface Ethernet0/1
description TO INSIDE 3560X
switchport access vlan 10
interface Ethernet0/2
shutdown
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
shutdown
interface Vlan1
no nameif
security-level 50
no ip address
interface Vlan10
description Cisco 3560x
nameif INSIDE
security-level 100
ip address 10.10.1.1 255.255.255.252
interface Vlan11
description Internet Interface
nameif OUTSIDE
security-level 0
ip address 1.1.1.1 255.255.255.224
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup OUTSIDE
dns server-group DefaultDNS
name-server 8.8.8.8
name-server 4.2.2.2
domain-name test.local
access-list RDP-INBOUND extended permit tcp any host 1.1.1.1 eq 3389
access-list RDP-INBOUND extended permit tcp any host 1.1.1.2 eq 3389
pager lines 24
logging enable
logging timestamp
logging trap warnings
logging device-id hostname
logging host INSIDE 10.10.70.100
mtu INSIDE 1500
mtu OUTSIDE 1500
ip verify reverse-path interface OUTSIDE
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-645.bin
no asdm history enable
arp timeout 14400
global (OUTSIDE) 1 interface
nat (INSIDE) 1 LANTraffic 255.255.0.0
static (INSIDE,OUTSIDE) tcp interface 3389 10.10.70.100 3389 netmask 255.255.255.255
static (INSIDE,OUTSIDE) tcp 1.1.1.2 3389 10.10.50.200 3389 netmask 255.255.255.255
access-group RDP-INBOUND in interface OUTSIDE
route OUTSIDE 0.0.0.0 0.0.0.0 1.1.1.1 1
route INSIDE LANTraffic 255.255.0.0 10.10.1.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
http server enable
http Management 255.255.255.0 INSIDE
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 10.10.70.100 255.255.255.255 INSIDE
ssh Management 255.255.255.0 INSIDE
ssh 0.0.0.0 0.0.0.0 OUTSIDE
ssh timeout 5
ssh version 2
console timeout 0
threat-detection basic-threat
threat-detection scanning-threat shun
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
webvpn
username scott password CNjeKgq88PLZXETE encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:1e9d278ce656f22829809f4c46b04a07
: end
[/code]

You're running ASA 8.2(5). In 8.4(2) Cisco added support for what they call Identity Firewall rules. That is, you can make access-lists entries specific to users (or object groups containing users).
There's an overview document on this posted here. It's a bit dated but I believe the only change is that Cisco is now preferring use of the more current Context Directory Agent (CDA) - a free VM they provide - vs. the deprecated AD agent (software service that runs on your DC).

OSB 11g with PASS-THROUGH PROXY

hello all,
I my designing on latest Fusion Middleware 11g Release 1 (11.1.1.5.0)
a http soap based osb proxy service wraped around owsm saml2.0- sender- vouches-message-protection service policy
a http soap based osb business service wrapped around owsm saml2.0- sender- vouches-message-protection client policy
a standalone client is calling this Passive Intermediary Proxy
In case of pass-through proxy service,
I would like to know that is it necessary that the policy contract between client --->proxy should be similar to proxy--->backend
I think so, because proxy is not atall touching the entire stuff starting from <soap:envelope>.........</soap:envelope>
So client-sent tokens etc. must match with what back end service requires.
In general, what am I buying by routing the client call through pass-through proxy service if the back-end webservice requires that entire message must by encrypted. In this case there is nothing open for the proxy to view and make any decisions based on that through its pipeline pairs etc.

Check out the following link...
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a0080450b5e.html

Email View Settings Help

I have had problems with outlook 2013 since Aug or Sept of 2014.
Windows 8 (8.1) I have had outlook 2013 on my work desktop windows 8.1 computer since September 2014. How do I view my new inbox and sent messages? I view the received messages as popups but after I view the email I can't find them again.
My outbox is empty. The newest message I have in my inbox is from 9/23/2014 even though I have received several messages today as popups, none are in my inbox folder. I have sent emailed myself a few test emails today, I can't find any of the
received or sent emails from me or anyone else. I have tried typing the senders name and email addresses in the search bar at the top of the page, that too has been unsuccessful. Please Help! I correspond with my customers via email all through the
day.
Right now I am using my service providers web based email account instead of using Outlook 2013.
Your assistance/ advice would be appreciated
ClaranceB

Hi,
Several suggestions on this issue:
1. Run Scanpst.exe to repair the possible damaged data file(.ost or .pst).
2. Run Outlook with the switch "outlook.exe /cleanviews".
3. Check if you have AutoArchive setup in Outlook.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Accessing XML View through DBUri

I am having problem in accessing XML View through HttpURI.
Also i need some advise in following such architecture between my app server and DB server.
The problem i am facing is that
1. The query passed through URI does a full table scan, hence poor performance.
2. Not able to query on date/timestamp.
Any help would be appreciated.
Thanks

Here is how my output would be..
<log systemID="00XXXABC01" MLN="9999" USN="00XXXPET01" timeStamp="Sun Jun 1 22:00:11 2003" timeZone="BST - Europe/London">
<message type="XXXHealthPage" time="Sun Jun 1 22:00:11 2003" source="XXX">
<text>This is manxx1 machine's HealthPage report</text>
<detail>
<generic_report title="XXX System Health Report">
     <emailaddr>[email protected]</emailaddr>
     <heading title="System Identification">
     <linevalue name="Report_date">Sun Jun 1 22:00:11 2003</linevalue>
     <linevalue name="Last_update_time">May 02 2003 22:00:14</linevalue>
     </heading>
</generic_report>
</detail>
</message>
</log>
I have underlined the variables that i have to query on.. basically i have to select messages between certain times for a particular system.
am trying a query..
1. http://localhost:8080/oradb/MACLOG/TEST_MACHINE_XML1/ROW/log[@systemid="415444KCT"]
This doesnt work for some reason.. i had to make systemid as a separate element.(@attribute doesnt work)2. i dono how to query for message[@time between to_char(...)]
Any Help..

Cannot access server in HQ through proxy server

Hi Experts,
We have a TMG 2010 installed and clients are accessing Internet through it.
And now there is an access problem to the destinatined server in HQ in another country, and it was fine to reach the destinated server before the servere changed its IP.
When trying to accesss the destinated server with new IP, the TMG log and report shows the connection status with
12030: The connection with the server was terminated abnoramlly.
While there is another guest segment that allows Internet access without proxy server, and they are able to access the server with no problem at all.
When I captured packets using Wireshark from the pc and found that the connection was actually from the pc to proxy server with the following result:
from PC to Proxy server
CONNECT xxx.xxx.com:443 HTTP/1.0
from Proxy server to PC
HTTP/1.1 502 Proxy Error (The connection with the server was terminated abnormally) (text/html)
Would there be a configuration problem inside TMG?
When i include the domain in https inspection exemption list, is that means client would be able to reach ther destination without being inspected?
Then how about the incoming connection? Is there any rules which will restrict HTTPS inbound?
Apart from above problem, clients also not able access some of https website such as banking with CA's, and no problem using guest segment (not through proxy server).
Thanks in advance
Ben

Hi,
>>And now there is an access problem to the destinatined server in HQ in another country, and it was fine to reach the destinated server before the servere changed its IP.
Have you tried to re-create the rule to access the destinatined server after it changed the IP?
>>When i include the domain in https inspection exemption list, is that means client would be able to reach ther destination without being inspected?
When a site is added to the HTTPS inspection exclusion list, Forefront TMG does not check the site’s certificate for expiration or revocation. However, name mismatch and trust are always checked, unless the “No Validation” mark is set.
Reference:Troubleshooting HTTPS inspection
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Not all emails getting through

I have my email set up so that I can access it via:
MS Outlook on a PC using POP
The VirginMedia web page, which uses GoogleMail
My Blackberry Curve 9320 (Pushed email)
I set up the email on my blackberry and I'm getting emails coming through. However if the PC downloads the emails first then they do not get pushed to my Blackberry.
As per instructions I went into Outlook and set up the mail account so that it did not delete emails from the server for 10 days. However I suspect that this setting does not work with VirginMedia / GoogleMail.
This is what I suspect is happening.... When Outlook downloads the emails the messages are removed from the "Inbox" and placed in an archived folder. This is certainly what it looks like on the webpage. The Blackberry does not see them as they are no longer in the "inbox".
There is a setting on the setup pages for VirginMedia email webpage that gives the option of
When messages are accessed by POP :
Archive VirginMedia mail's copy (my current setting)
Delete Virginmedia mail's copy
Keep Virginmedia mail's copy in the inbox
Mark Virginmedia mail's copy as read
The archive setting is causing me my current problem. The delete option would also give me the same problem and I would lose the email from the webpage app.
I am therefore left with keeping it in the inbox or marking it as read.
I really need to know how the Blackberry would behave in either of these situations.
If I leave the messages in the inbox then I presume that the Blackberry will keep trying to push them. I also think that Outlook will see them as a new message and download them again.
If I mark them as read then will the Blackberry still see them? I think Outlook will ignore the emails it has downloaded.
Both of these options would cause all emails to remain in the inbox on the webpage app, but I think I can live with that.
Someone must have had the same problem. I did a scan of the internet and found nothing. Perhaps I was using the wong search works.
Has anyone used the setup that I have? What settings do you use?

Fluffy537 wrote:
If I leave the messages in the inbox then I presume that the Blackberry will keep trying to push them. I also think that Outlook will see them as a new message and download them again.
If I mark them as read then will the Blackberry still see them? I think Outlook will ignore the emails it has downloaded.
You need to leave the messages in the Inbox. RIM will push the message once to your device, and the message will be flagged as pushed by RIM and not pushed again. Outlook will download the message once.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

ACS 5.1 "Launch Monitoring & Report Viewer" not working

I'm trying to view the logs on the ACS server via the web interface. When I click on "Launch Monitoring & Report Viewer", it opens a new window and I get the error "cannot display the webpage". This happens on both Firefox and IE. The URL it's trying to load is this: https://x.x.x.x/acsadmin/ReportsRedirectorAction.do
These are relatively new boxes so I don't know if I missed some config bit somewhere to enable that utility or what.
Any insight would be appreciated.
Thanks,

I had the issue in ACS 5.1 no patch and it was fixed after reboot and after applying patch three it didnt showed up. The only difference is i had a standalone ACS.Who is the log collector in your setup?
Let me know if you can apply patch here is the link for that :
http://www.cisco.com/cisco/software/release.html?mdfid=282773289&flowid=4409&softwareid=282766937&release=5.1.0.44&rellifecycle=&relind=AVAILABLE&reltype=latest
here is the procedure to apply patch 3 ( on both primary and secondary)
downlaod the file : 5-1-0-44-3.tar.gpg
and place the file in the FTP server in your enviroment
Login to the ACS CLI :
Create a repository:
acs/admin(config)# repository myrepository
acs/admin(config-Repository)# url sftp://starwars.test.com/repository/system1
acs/admin(config-Repository)# user luke password skywalker
acs/admin(config-Repository)# exit
then run this command :
acs patch install patch-name.tar.gpg repository repository-name
#Installing an ACS patch requires a restart of ACS services.
Would you like to continue? yes/no
Thanks
Waris Hussain.

Email Notifications through workflow for all Approved and Rejected Orders

hi,
i have to send Email Notifications through workflow for all Approved and Rejected Orders to the user who have submitted the order for approval.how could it be done.please send ur solutions.
regards
yesukannan

Hi,
An option would be use Oracle Alert. Create an event based alert on the table where you have order approvals or rejections. This alert will be raised after inserting or updating this table. Create an action linked to this alert, and choose message as action type.
This setup can be done under Alert Manager Responsibility.
Regards,
Ketter Ohnes

When I go into my email account through Safari, I cannot see all of my messages. 26 may show on the screen but it says I have 32. However, at the bottom right it appears as if all the messages are showing and the arrow to get more is not highlighted.

When I go to my email account through Safari, I cannot see all of my messages. It says there are 34 but I can only see 26. However, at the bottom right the arrows to go to the next screen are not highlighted? I also cannot scroll any further down. Does anyone know how to scroll down to see all of my messages? I use Travel-net Communications as my email provider (Ottawa, On, Canada).

hey ,
if it is showing you 34 mails them it is correct. when you see your mail. apple has a smart way of arranging your mail.suppose you recieve 4 mails from one email id it will show you under one highlighted mail. so when you open a mail from anyone trying scrolling it down and you will find your missing mails.

I run a gmail email address through Outlook 2013. How can I synch Contacts to my iPhone 4? iTunes doesn't do it. Verizon doesn't know how.

Greetings Experts
I run an email address through Outlook 2013 on my PC. I want to synch my Outlook Contacts and Calendar to my iPhone 4 but iTunes isn't doing it and 3 Verizon stores have failed. Advice? Suggestions? Solutions?
Thanks
JohnnieBGood

Hi randers4. Already have. I have two (2) gmail addresses - only one of which I run through Outlook. Both are set up in GMail on the iPhone under Settings but Contacts and Calendars are only set up to synch on the account that goes thru Outlook. My email from both merge OK on the iPhone but Contacts and Calendars from Outlook doesn't come over and its the only one i have the Settings turned on for Contacts,Calendars and Notes.

A View Through Windows 8.1.1

A View Through Windows 8.1.1
There above opens fine for me; sorry, didn't expect anyone would have difficulty w/ it.
Windows 8.1.1 or Windows 8.1 Update or KB2919355
Call it what you like, a rose by any other name is, still, a rose.
And this has brought some pretty rosy stuff to Win 8.1. 8.1 delivered a plethora of cool things to the initial Windows 8.0 platform but, I am not here, right now, to discuss that gold mine but, rather its Update, Win8.1.1. This small yet,
packed Update comes or will as an Auto Update via WU. It installs quickly and easily.
Basically, its only requirement is having Windows 8.1 in place… an 8.0 device must be Upgraded to Windows 8.1 and then on to this Update.
Now, even though 8.1 responded to User feedback and requests, 8.1.1 has tried to take that endeavor, even, further.
Much of that is in regard to making the OS more intuitive, more familiar and more mouse friendly, catering to non-Touch environments and to have some things more overt.
A good portion of the Update impact on both Consumers and Businesses whilst some are value items specifically for enterprise.
Firstly, let’s address the ‘common ground’ and then look at the assets to or for businesses.
I will not delve into extreme details for this discussion but, will provide links which, will give you the full story.
However, the links go to the usual, sterile, propaganda and although, certainly, informative & enlightening, not the personal perspective that I would like to share, at this time.
I write in several tech forums, ergo, I have seen what people like, dislike or want.
8.1 does, indeed, indulge what people have been expressing.
It, also, I feel, helps make people enjoy using Store APPs more and helps draw then into the world of APPs.
A major part of the Update is in regard to APP handling and usage.
To me it’s mostly about APPs but, there are some other items so let’s tackle them, first.
May seem like little things but, sometimes doesn’t take much to make people happy.
And this does destroy the suggestion that MS doesn’t listen to End Users or care what they think or say.
On Start there, now, are Power & Search icons. There are Rt Clk menus attached to the Start Tiles.
There’s a Search box on the ALL Applications screen. Back to the Store APPS enhancements because I suggest, this is the, really, cool bit.
Some people have struggled over using the Switcher Bar, opening APPs, closing APPs and positioning and maneuvering or manipulating them.
Well, this is where things get exciting… NOW, the Store APPs can sit on the Task Bar
and they can be pinned. NOW, they can be closed or minimised with a bar at the top of them.
NOW, as many as four can be enjoy with greater flexibility than ever before.
All of this making the OS easier and more similar to what people are accustom to having and doing.
And having APP icons permanently available on the task Bar is great since, any that are used consistently to get shut down by the OS on the Switcher Bar after a period of time. Nor does one have to pop out the Switcher Bar to access an APP.
Lastly, to carry the familiar Desktop experience across ALL screens, the Task Bar shows on every screen, even if it is a Store APP, Start or ALL Applications.
There are, also, a number of things that are not quite so obvious or superficial, some under-the-covers stuff, plus things relative to business/enterprise issues.
One thing having positive impact right across the board is support for low cost hardware.
With Windows 8.1 Update there is a continuance to fine-tune Windows performance to deliver a great user experience on the broad range of Windows devices. Specifically, with memory and disk space optimization in Windows 8.1 Update we now
enable Windows to run on even lower cost hardware with as low as 1GB of RAM and a 16GB hard drive.
So you ca see it is possible to convey the message that using the OS can, now, thanks to this Update be, even more enjoyable and appealing than it, already, was.
Things easier to find or see and done in established, already known ways, methods and comfort zones.
End Users will like what Win8.1.1 brings and offers them… so spread the word.
Now, for some important ‘bullets’ provided by the Update that IT Pros should know about and be able to enthusiastically impart, particularly, to thrilled Enterprise Users on top of the aspects, already, mentioned that are for everyone.
>> Improvements to take advantage of new hardware innovation and support the latest devices, such as devices based on 64 bit Baytrail™ processors.
>> Extended Mobile Device Management (MDM)
>> Easier app deployment and management is app side loading
And, also, exciting
licensing changes come with Windows 8.1 Update.
The big caveat here, the meaningful take-away for y’all, in my view, is there are many desirable facets contained in the Windows 8.1.1 Update.
It is a strength to know this content so it can be transmitted to End Users both, Consumer and Enterprise customers and clients.
There are things for which business folks will be grateful.
There are things that make the User Experience nicer for anyone and everyone.
KB2919355 may be small but, in my view, it packs a big punch.
Here are the links I promised for your further reading and information.
What’s New in the Update?
Installing the Update
Bonuses for Enterprise
Drew
Pres. Computer Issues
MS Partner
MS Beta-Tester
MS Partner Company
IT Forums Contributor
Drew MS Partner / MS Beta Tester / Pres. Computer Issues Pres. Computer Issues www.drewsci.com

The view from here, Drew:
Reading around the edges of the error message, are you seriously trying to find things of merit in the spring update? They seem pretty few and far between to me. 800 MB (er, 200, er, who knows) for what? a few dozen bugfixes?
If you know of something of substance in the update, please share, because I'm not finding much.
Why has there been so much hype about this version? It was "leaked", then it has been getting press like what you're trying to show here. Isn't the hype actually supposed to come with some substance as well? Where is
that substance?
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options
What’s new in Windows 8.1 Update
http://windows.microsoft.com/en-us/windows-8/whats-new

Monitor email viewing through proxy

Similar Messages

Maybe you are looking for