Monitor file system and run delete

Hello
If I get archiver error(ORA-00257) or if the file system is 98 percent full, the archivelogs should be deleted from o/s via rman.
How can I achieve this from grid control point of view ?

Ora_83 wrote:
Hello
If I get archiver error(ORA-00257) or if the file system is 98 percent full, the archivelogs should be deleted from o/s via rman.
How can I achieve this from grid control point of view ?Yes .. this can be achieved .. You will have to define the corrective action whenever the metric reaches threshold.
http://gavinsoorma.com/2009/09/10g-em-grid-control-notification-rules-and-corrective-action-jobs/
Regards
Rajesh

Similar Messages

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP

The Em Key is not configured properly or is corrupted in the file system and doe s not exist in the Management Repository.

I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
C:\Documents and Settings\abigail>emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is not configured properly or is corrupted in the file system and doe
s not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
onfig directory.
2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
.ora file location>".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is already configured. To override the current configuration, run "em
ctl config emkey <options> -force".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The Em Key could not be configured. Unable to access file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://ABIGAIL:5501/em/console/aboutApplication
DBCONSOLE already stopped... Done.
Agent is already stopped... Done.
Securing dbconsole... Started.
Please enter repository schema password:
Securing dbconsole... Failed.
EMKey is misconfigured.

Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
ANyway, thank youuuu

Where is the account to execute ssis in file system when run a job

Hi
I have a ssis package in file system, and create a job, in general... the section package:... select "File System".
but it thrown: access denegate: the user should be administrator..
what is the account or where is it, that use to run the job in agent, this is owner of the job?
this is my configuration..
http://blog.sqlauthority.com/2011/05/23/sql-server-running-ssis-package-in-scheduled-job/

By default it would be the service account which SQLAgent uses
You can see this from services properties
for that go to start-> run
type services .msc
In local services window right click SQL Agent Service and check the properties and in LogOn tab you will see the account configured for it
Most cases it would be network service account and in some cases local system account (if not in a domain)
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

OES11 SP2 - Linux File System and NSS Pools & Volumes

Planning to install our first OES11 SP2 server into an existing tree - the
idea is to run this new OES11 server virtualized on VMware ESXi 5.5
The existing tree has two physical NW6.5SP8 servers running eDirectory
Version 8.7.3.10b (NDS Version 10554.64). One of the existing Netware
servers is used for DHCP/DNS, File Sharing from three NSS volumes and
Groupwise 7.0.4 whilst the second server is used for FTP services and
eDirectory redundancy. Ultimately the plan is to have two virtualized OES11
SP2 server with one for file sharing and the other for making the move from
GW7 to GW2012. And we're planning to stick with NSS for file sharing on the
new OES11 SP2 server.
I've come across a couple of posts for earlier versions of OES which
recommended not to put the Linux Native OS File System and NSS storage
pools/volumes on the same hard drive. Apparently the advice was a result of
needing to allow EVMS to manage the drive which could be problemmatic.
I've read the OES11 documentation which says that "The Enterprise Volume
Management System (EVMS) has been deprecated in SLES 11, and is also
deprecated in OES 11. Novell Linux Volume Manager (NLVM) replaces EVMS for
managing NetWare partitions under Novell Storage Services (NSS) pools."
So I'm wondering if there is still a compelling requirement to keep the
Linux Native File System and NSS pools/volumes on separate hard drives or
can they both now safely co-exist on the same drive without causing
headaches or gotchas for the future?
Neil

Hi Willem,
Many thanks for the further reply.
So we can just use the VMWare setup to "split" the one physical drive into
two virtual drives (one for the OS and the second for the pools).
And I've seen posts in other forums about the need for a decent battery
backed cache module for the P410i controller so I'll make sure we get one
(probably 512Mb module + battery).
Can I ask what is the advantage of configuring each VM's virtual disk to run
on it's own virtual SCSI adapter (by setting disk1 to scsi 0:0, disk2 to
scsi 1:0, and so on)?
Cheers,
Neil
>>> On 9/5/14 at 12:56, in message
<[email protected]>,
magic31<[email protected]> wrote:
> HI Niel,
>
> xyzl;2318555 Wrote: >
>> The new installation will run on a Proliant ML350 G6 with P410i>
> controller
>> so we can use the raid capability to create two different logical drives>
> as
>> suggested.
>
> As you will be using ESXi 5.5 as host OS, it's not needed to split
> thehost server storage into two logical drives... unless that's what
> youwant in perspective for "general performance" or redundancy reasons.
> Italso depends on the options that P410i controller has.
>
> On a side note, I'm not too familiar with the P410i controller... domake
> sure you have a decent battery backed cache module installed, asthat will
> greatly help with the disk performance bit.
> If the controller can handle it and the controller can handle it, go
> forraid 10 or raid 50. That might be too big a space penalty but will
> helpwith disk performance.
>
> Once you have your VMware server up and running, you can configure
> thetwo VM's with each two or more drives attached (on for the OS,
> thesecond or others for your pools).
> I usually create a virtual disk per pool+volume set (e.g. DATAPOOL
> &DATAVOLUME on one vm virtual disk, USERPOOL & USER volume on an other
> vmvirtual disk).
> With VMware you can than also configure each VM's virtual disk to run
> onit's own virtual SCSI adapter (bij setting disk1 to scsi 0:0, disk2
> toscsi 1:0, and so on).
>
>
> xyzl;2318555 Wrote: > Do you have any suggestions for the disk space that
> should be reserved> or
>> used for the Linux Native OS File System (/boot, /swap and LVM)?
>>
>
> Here's one thread that might be of interest (there are more
> throughoutthe SLES/OES
>
forums):https://forums.novell.com/showthread...rtitioning-%28
> moving-from-NW%29
>
> I still contently follow the method I choose for back in 2008, justwith
> a little bigger sizing which now is:
>
> On a virtual disk sized 39GB:
>
> primary partition 1: 500 MB /boot , fs type ext2
> primary partition 2: 12GB / (root), fs type ext3
> primary partition 3: 3 GB swap , type swap
>
> primary partition 4: LVM VG-SYSTEM (LVM partition type 8E), takes up
> therest of the disk **
> LVM volume (lv_var): 12 GB /var , fs type ext3
> LVM volume (lv_usr-install): 7GB /usr/install, fs type ext3
> * there's still a little space left in the LVM VG, in case var needs
> toquickly be enlarged
>
> One thing that's different in here vs what I used to do: I replaced
> the/tmp mountpoint with /usr/install
>
> In /usr/install, I place all relevant install files/IOS's
> andinstallation specifics (text files) for the server in question. Keeps
> itall in one neat place imo.
>
> Cheers,
> Willem-- Knowledge Partner (voluntary sysop)
> ---
> If you find a post helpful and are logged into the web interface,
> please show your appreciation and click on the star below it.
>
Thanks!---------------------------------------------------------------------
---magi
> c31's Profile: https://forums.novell.com/member.php?userid=2303View this
> thread: https://forums.novell.com/showthread.php?t=476852

Device object not present,restart the system and run setup again????

i install window xp sp2 in my macbook,when i install driver by mac os cd,installation run until sigmatel,it show error,the my mbp will restart automatically,and the driver installion not complete!! i try to install sigmatel idt sound driver manually,when system update the hardware configuration,it show an error message
" device object not present,restart the system and run setup again"!!!! so i can not fully install bootcamp driver in window!
any can help??
macbook pro 13" 2010 mid

Hi:
Your notebook is not supported by HP for Windows XP.
Please read the XP downgrade guide at the link below for instructions on how to get your audio to work in XP.
http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
The specific instructions for your model series can be found in the section titled 3. Difficult Models
Paul

File system and LR2 file system view summary

Hello,
Is there a way when navigating a directory via the Folders panel to click on the folder and get summary information about the contents of the folder both from a file system perspective as well as a Lightroom perspective?
file system perspective: number of physical files supported by LR2 in the folder
LR2 perspective: the number of files that have virtual copies, how many total virtual copies total, how many photos are in stacks, how many stacks, etc.
Thanks,
Matt
-Windows XP x64 SP2
-AMD Athlon 64 X2 Dual Core 6400+
-4.00 GB of RAM
-Lightroom Version 2.0 64-bit 481478 Camera Raw 4.5
-Two Silicon Graphics GDM-5011P Monitors
-Huey Pro with version 1.5 of their calibration/profiling software
-Nvidia Evga 8800 GT graphics card with 512 MB of Video RAM
-Monitor One: The 'normal' Lightroom window in either the Library or Develop Module
-Monitor Two: 'Loupe-Normal' in 1:1 view

 No, you can't specify an entire filesystem as something to cluster. I
 suggest using NFS or some shared filesystem and then running a cluster
 off of that.
 - Mike
 Michael Lenart wrote:
 >
 > yes
 > "Mike Benham" <[email protected]> wrote in message
 > news:[email protected]..
 > >
 > >
 > >
 > > I'm not sure if I understand what you're asking. How can you cluster a
 > > filesystem? It seems like you want to mount some filesystem via NFS and
 > > then access that from each instance of a server? Are you asking if
 > > Weblogic can perform the duty of NFS?
 > >
 > > - Mike
 > >
 > >
 > > Michael Lenart wrote:
 > > >
 > > > Can the file system be clustered?? For example, in the cluster level
 > > > property file can I have a file system with the name of XDrive and then
 > use
 > > > that file system in my components??

Backup to file system and sbt_tape at the same time?

hello!
is it possible to do a rman backup to disk and sbt_tape at the same time (just one backup, not two)? the reason is, that i want to copy the rman backup files from the local file system via robocopy to another server (in a different building), so that i can use them for fast restores in the case of a crash.
if not, what is the recommended strategy in this case? backups should be available on tape AND the file system of a different machine.
environment: oracle 10g, windows server 2008, commvault for backup on tape
thanks for your advice.
best regards,
christian

If you manually copy backupsets out of the FRA to another location, but still accessible as "local disks", you can use the CATALOG command in RMAN to "catalog" the copies.
Thus, if you opy or move files from the FRA to /mybackups/MYDB, you would use
"CATALOG START WITH /mybackups/MYDB" or individually "CATALOG BACKUPPIECE /mybackups/MYDB/backuppiece_1" etc
Once you have moved or removed the backupsets out of the FRA, you must use
"CROSSCHECK BACKUP"
and
"DELETE EXPIRED BACKUP"
to update the RMAN repository. Else, Oracle will continue to "account" for disks pace consumed by the BackupPieces in V$FLASH_RECOVERY_AREA_USAGE and will soon "run out of space".
You would do the same for ArchiveLogs (CROSSCHECK ARCHIVELOG ALL; DELETE EXPIRED ARCHIVELOG ALL) if your ArchiveLogs go to the FRA as USE_DB_RECOVERY_FILE_DEST

How to get access to the local file system when running with Web Start

I'm trying to create a JavaFX app that reads and writes image files to the local file system. Unfortunately, when I run it using the JNLP file that NetBeans generates, I get access permission errors when I try to create an Image object from a .png file.
Is there any way to make this work in Netbeans? I assume I need to sign the jar or something? I tried turning "Enable Web Start" on in the application settings, and "self-sign by generated key", but that made it so the app wouldn't launch at all using the JNLP file.

Same as usual as with any other web start app : sign the app or modify the policies of the local JRE. Better sign the app with a temp certificate.
As for the 2nd error (signed app does not launch), I have no idea as I haven't tried using JWS with FX 2.0 yet. Try to activate console and loggin in Java's control panel options (in W7, JWS logs are in c:\users\<userid>\appdata\LocalLow\Sun\Java\Deployment\log) and see if anything appear here.
Anyway JWS errors are notoriously not easy to figure out and the whole technology in itself is temperamental. Find the tool named JaNeLA on the web it will help you analyze syntax error in your JNLP (though it is not aware of the new syntax introduced for FX 2.0 and may produce lots of errors on those) and head to the JWS forum (Java Web Start & JNLP Andrew Thompson who dwells over there is the author of JaNeLA).

BIP and Siebel server - file system and load balancing question

1. I just need to understand whenever the reports are generated through BIP, are there reports stored on some local directory (say Reports) on the BIP server or Siebel File system? If on a File system how will archiving policy be implemented.
2. When we talk of load balancing BIP Server. Can the common load balancer be used for BIP and Siebel servers?
http://myforums.oracle.com/jive3/thread.jspa?threadID=335601

Hi Sravanthi,
Please check the below for finding ITS and WAS parameters from backend :
For ITS - Go to SE37 >> Utilities >> Setting >> Click on ICON Right Top Corner in popup window >> Select Internet Transaction Server >> you will find the Standard Path and HTTP URL.
For WAS - Go to SE37 >> Run FM - RSBB_URL_PREFIX_GET >> Execute it >> you will find PRefix and PAth paramter for WAS.
Please refer to this may help step-by-step : How-to create a portal system for using it in Visual Composer
Hope it helps
Regards
Arun

Note on applying patches to the file system and database

Dear all,
I am new to Oracle E-business suite. Anyone in the house that can give a note (either a step by step or oracle metalink note) on how to apply patches to a file system or database.
Kind Regards.

Hi,
Steps to apply an application patch:
- Stop all application services (keep the database and the database listener up and running)
- Download the patch from Metalink
- Copy the patch file to any directory (i.e. /u04/patches)
- As 'applmgr' do the following:
- Source the environment file
- $ cd /u04/patches
- Type 'unzip <patch_number>.zip'
- cd <patch_number>
- Type 'adpatch'
- When it prompts you to enter the patch driver, type 'u<patch_number>.drv'
Apply the patch on the database tier first then on the application tier.
Do not forget to 'Enable Maintenance Mode' from adadmin before applying the patch. Once you apply the patch successfully, 'Disable Maintenance Mode' from adadmin.
And, always follow the steps in the patch README file.
For database patches, follow the steps in the patch README file and apply the patch using opatch as oracle user.
For more details about applying patches, please refer to:
"Oracle Applications Maintenance Utilities" manual
http://download-uk.oracle.com/docs/cd/B25516_14/current/html/docset.html
How to apply EBS 12i pathces in both Linux and Windows
Re: How to apply EBS 12i pathces in both Linux and Windows
Need to apply patch!
Need to apply patch!
Regards,
Hussein

Read only file system and Problems witth pacman -S

Hi im a newbie at Arch, and i have 2 problems...
1) When I log in as a root user i can't modify any of the configuration files cause i only have a " Read only file System" does anyone know how I can change this cause im sick of using my live cd to modify the files i need to change..
2) I have problems with pacman -S it says " Unable to lock database if you're sure pacman is not already running you can remove /tmp/pacman.lck"
when i do rm /tmp/pacman.lck it says that it can't be done cause the file doesn't exist.. and Im sure that my dhcp and dns is working fine... (just in case of any wonder)
Well if someone could help me i really would appreciate it
thanks

# <file> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /mnt/cd iso9660 ro,user,noauto,unhide 0 0
/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/fd0 /mnt/fl vflat user,noauto 0 0
/dev/hda6 swap swap default 0 0
/dev/hda5/ ext3 defaults 0 0
/dev/hda7/mnt/windows vfat rw,usev,auto,umask = 000 0 0
fsck -fC /dev/hda5 didnt work it said... "Error while executing fsck.ext3 for /dev/hda5

Shared file system and other questions

Hi,
 Is shared file system common for all WL in the cluster or each WL has its
 own one.
 Next questin is connected with proxy server.
 I'm not sure if there should be one proxy server for two servers working in
 one cluster or each server should has own proxy server (I mean WL proxy
 server).???
 In my opinion there should be one proxy server which redirect requests to
 server in cluster using some balancing method. But when I read documentation
 about cluster's architectures I saw the picture where each WL cluster server
 had proxy own server. I'm not sure if this picture showed only outline of
 architecture or it was real solution???
 Is it better to install another proxy server (for example Apache) than WL
 proxy server?
 In previous questions I asked if it is possible to replic static classes,
 fields etc. Prasad Peddada told that it is not replicated. But I wonder if
 there exists some method to force replicating it.? Maybe we can implement
 some method and run it?
 Thanks,
 Best regards,
 Robert


Mike.
 In WLS51 cluster, it is better to specify different workingDir for each
 server. You can create a weblogic.properties in your per-server directory
 and add jspc properties in that file.
 Cheers - Wei
 "Mike Reiche" <[email protected]> wrote in message
 news:[email protected]...
 >
 > If you share directories between instances -
 > what happens when two WL instances decide to compile
 > the same JSP at the same time?
 >
 > Mike
 >
 >
 > Viresh Garg <[email protected]> wrote:
 > >
 > >
 > >
 > >
 > >"Robert Zaczyñski" wrote:
 > >
 > >> Hi,
 > >> Is shared file system common for all WL in
 > >the cluster or each WL has its
 > >> own one.
 > >
 > >I am not sure I understand your question. We
 > >recommend using shared file system
 > >for ease of maintanence and to get rid of pain
 > >for versioning problems for
 > >application code. It is not a requirement of
 > >WLS cluster. I really don't
 > >understand what you mean by
 > >"Is shared file system common for all WL in
 > >the cluster or each WL has its
 > >own one
 > >"
 > >
 > >>
 > >>
 > >> Next questin is connected with proxy server.
 > >> I'm not sure if there should be one proxy
 > >server for two servers working in
 > >> one cluster or each server should has own
 > >proxy server (I mean WL proxy
 > >> server).???
 > >> In my opinion there should be one proxy server
 > >which redirect requests to
 > >> server in cluster using some balancing method.
 > >But when I read documentation
 > >> about cluster's architectures I saw the picture
 > >where each WL cluster server
 > >> had proxy own server. I'm not sure if this
 > >picture showed only outline of
 > >> architecture or it was real solution???
 > >
 > >One or more proxy servers can be used. One is
 > >just fine, however you **might**
 > >want to use multiple proxies for heavily loaded
 > >application to avoid contention.
 > >All proxy servers will load balance between
 > >all servers in clsuter. a proxy
 > >servers is not attached or bound to an instance
 > >in cluster.
 > >
 > >>
 > >>
 > >> Is it better to install another proxy server
 > >(for example Apache) than WL
 > >> proxy server?
 > >>
 > >> In previous questions I asked if it is possible
 > >to replic static classes,
 > >> fields etc. Prasad Peddada told that it is
 > >not replicated. But I wonder if
 > >> there exists some method to force replicating
 > >it.? Maybe we can implement
 > >> some method and run it?
 > >
 > >I would recommend that for static classes, you
 > >use context parameters of web
 > >application or something similar, why do you
 > >need to replicate them. WHy not
 > >each cluster instance have a local copy and
 > >use their own copy for such
 > >classes/fields?
 > >
 > >>
 > >>
 > >> Thanks,
 > >> Best regards,
 > >> Robert
 > >
 > >Viresh Garg
 > >Principal Developer Relations Engineer
 > >BEA Systems
 > >
 > >
 > >
 > ><!doctype html public "-//w3c//dtd html 4.0
 > >transitional//en">
 > ><html>
 > >
 > >"Robert Zaczyñski" wrote:
 > ><blockquote TYPE=CITE>Hi,
 > > Is shared file system common for all WL
 > >in the cluster or each WL has
 > >its
 > > own one.</blockquote>
 > >
 > > I am not sure I understand your question.
 > >We recommend using shared
 > >file system for ease of maintanence and to get
 > >rid of pain for versioning
 > >problems for application code. It is not a requirement
 > >of WLS cluster.
 > >I really don't understand what you mean by
 > > "Is shared file system common for all
 > >WL in the cluster or each
 > >WL has its
 > > own one
 > > "
 > ><blockquote TYPE=CITE>
 > >Next questin is connected with proxy server.
 > > I'm not sure if there should be one proxy
 > >server for two servers working
 > >in
 > > one cluster or each server should has own
 > >proxy server (I mean WL proxy
 > > server).???
 > > In my opinion there should be one proxy
 > >server which redirect requests
 > >to
 > > server in cluster using some balancing method.
 > >But when I read documentation
 > > about cluster's architectures I saw the
 > >picture where each WL cluster
 > >server
 > > had proxy own server. I'm not sure if this
 > >picture showed only outline
 > >of
 > > architecture or it was real solution???</blockquote>
 > >
 > > One or more proxy servers can be used.
 > >One is just fine, however
 > >you **might** want to use multiple proxies for
 > >heavily loaded application
 > >to avoid contention. All proxy servers will
 > >load balance between all servers
 > >in clsuter. a proxy servers is not attached
 > >or bound to an instance in
 > >cluster.
 > ><blockquote TYPE=CITE>
 > >Is it better to install another proxy server
 > >(for example Apache) than
 > >WL
 > > proxy server?
 > >In previous questions I asked if it is possible
 > >to replic static classes,
 > > fields etc. Prasad Peddada told that it
 > >is not replicated. But I wonder
 > >if
 > > there exists some method to force replicating
 > >it.? Maybe we can implement
 > > some method and run it?</blockquote>
 > >
 > > I would recommend that for static classes,
 > >you use context parameters
 > >of web application or something similar, why
 > >do you need to replicate them.
 > >WHy not each cluster instance have a local copy
 > >and use their own copy
 > >for such classes/fields?
 > ><blockquote TYPE=CITE>
 > >Thanks,
 > > Best regards,
 > > Robert</blockquote>
 > >
 > >Viresh Garg
 > > Principal Developer Relations Engineer
 > > BEA Systems
 > > </html>
 > >
 > >
 >

Monitor file system under SMC 3.5

Hi,
How can I monitor my file systems under SMC 3.5? Do I need to install additional add-ons? Or is this feature not supported under SMC?
TIA

The Advanced Kernel Reader, found in the ASM add-on contains the following attributes:
When installed, you can unload the "Kernel Reader (simple)" and install the full "Kernel Reader".
Filesystem Usage
     UFS Filesystem Usage
          Mount Point
          Disk Name
          Size (KB)
          Free (KB)
          Free KB(Non Root)
          % Used
          Total Inodes
          Available Inodes
          % Of Inodes Used
     VXFS Filesystem Usage
          Mount Point
          Disk Name
          Size (KB)
          Free (KB)
          Free KB(Non Root)
          % Used
          Total Inodes
          Available Inodes
          % Of Inodes Used
ASM is not a free add-on. Similar stats are found in Halcyon's Plus Pack module shown in the link below.
http://www.halcyoninc.com/products/PlusPack/help/SystemMonitor/HALSolarisSystemAlert-filesystem-h.html
iMac.

Image: display from local drive, upload to server file system, and display from server

Hello,
I am using jdev 11.1.2.4.0...
The requirement is that users would like to upload images from their local drive to server drive and they would like display images from server drive later.
We don't want to keep images in database. I am not sure what the solution should be; however, I plan to ....
1. create a table to keep an information of images -- image_id, image_location (server drive), image_filename
2. create a page where users can enter image information and specific filename from a local drive (I think I will use inputFile component) and provide the preview button to display an image on screen before save it. To save data is to save information to the database and copy an image file to the server drive (the destination location for image files is predefined.)
3. create another page where users can browse information from the database and display an image for a selected record by getting from the server.
I need suggestions on...
1. how to display an image on page from the local drive?
2. how to copy a file from a local drive to a server?
3. how to display an image on page from the server drive?
Thank you.
nat

See:
http://tompeez.wordpress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-1/
http://tompeez.wordpress.com/2011/11/26/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-2/
http://tompeez.wordpress.com/2011/12/16/jdev11-1-2-1-0-handling-imagesfiles-in-adf-part-3/
Where Timo saves images to the database, you save it to the file system (examples on how to do this from Java are available plenty if you just Google for it). Similar to Timo you then use the image tag to display images. The difference is that you can directly add the URL from the database table.
The benefit of using a database to host images is that you are not dependent on file server structures though
Frank

Monitor file system and run delete

Similar Messages

Maybe you are looking for