Monitor file system under SMC 3.5

Hi,
How can I monitor my file systems under SMC 3.5? Do I need to install additional add-ons? Or is this feature not supported under SMC?
TIA

The Advanced Kernel Reader, found in the ASM add-on contains the following attributes:
When installed, you can unload the "Kernel Reader (simple)" and install the full "Kernel Reader".
Filesystem Usage
     UFS Filesystem Usage
          Mount Point
          Disk Name
          Size (KB)
          Free (KB)
          Free KB(Non Root)
          % Used
          Total Inodes
          Available Inodes
          % Of Inodes Used
     VXFS Filesystem Usage
          Mount Point
          Disk Name
          Size (KB)
          Free (KB)
          Free KB(Non Root)
          % Used
          Total Inodes
          Available Inodes
          % Of Inodes Used
ASM is not a free add-on. Similar stats are found in Halcyon's Plus Pack module shown in the link below.
http://www.halcyoninc.com/products/PlusPack/help/SystemMonitor/HALSolarisSystemAlert-filesystem-h.html
iMac.

Similar Messages

Monitor file system and run delete

Hello
If I get archiver error(ORA-00257) or if the file system is 98 percent full, the archivelogs should be deleted from o/s via rman.
How can I achieve this from grid control point of view ?

Ora_83 wrote:
Hello
If I get archiver error(ORA-00257) or if the file system is 98 percent full, the archivelogs should be deleted from o/s via rman.
How can I achieve this from grid control point of view ?Yes .. this can be achieved .. You will have to define the corrective action whenever the metric reaches threshold.
http://gavinsoorma.com/2009/09/10g-em-grid-control-notification-rules-and-corrective-action-jobs/
Regards
Rajesh

HELP!!! i formated a external hdd to MAC os Extended file system

HELP!!! i formated a external hdd to MAC os Extended file system in disk utility and now i need it formated back to work on pc. i have tried ms-dos file system under the erase tab and it doesnt work, on my pc all it has under my computer is black, but if you go down by the time you can "safely remove hardware" but it dosent give a drive location (ex: e:/)....
the external hdd is a seagate go 250gb usb

Use the PC to reformat the drive.

Separating file system

Hi,
We are using 12.0.6, and in our environment we have both application file system and database+RDBMS file system under same mount point (/u01)
cd /u01
applprod oraprod
applprod contanis apps and inst directories
oraprod contains db directory
Now we have created two more file system on the server (sanapp and sandb)
we want to move applprod from /u01 to sanapp and oraprod to /sandb
Please suggest how to do it
Regards

Hi;
I belive easy way is
1. Run preclone on db and apps tier
2. Start postclone
3. Give new path during clone process
Regard
Helios

File Systems are not shown in CCMS Monitoring

Hi Gurus,
We have installed all SAP components in Solaris 10 zones including Solution Manager.
Solaris File Systems are not shown in CCMS Monitoring under FileSystem. It looks like SAPOSCOL is not sending the OS data to CCMS. It does not show file systems in OS06 also.
The probles exists on Systems runnig in Solaris 10 zones only and NOT on systems running on individual Servers. [without Solaris zones]
Thanks,
Pj

Hi,
You need take some special considerations while installing SOLMAN on SOLARIS 10 zones. Check these notes
Note 870652 - Installation of SAP in a Solaris 10 zone
Note 724713 - parameter settings for Solaris 10
Hope this will solve your problem.
--Ragu

File System repository error in component monitor

Hi,
I created a file system repository in our portal server which will connect to windows file system and display the folder structure.
I created a File system repository manager with the following properties mentioned below
Prefix (must start with /): /FMICDelaers
Lookup mode: caseless
Root Directory:
fendercorp\FMICDelaers
Repository Services:
Property Search Manager:
Security Manager: W2kSecurityManager
ACL Manager Cache:ca_rsrc_acl
Windows Landscape System: B2B_Windows
I have given full acees to everyone for FMICDealers folder on fendercorp server.
We have created a networkpath called B2B_windows as mentioned below
jCIFS Protocol: yes
Description:
Network Path:
fendercorp\FMICDelaers
Password:xxxxx
User: insidefender\ssayneni
When i am checking the repository in component monitor i am getting the below error
Startup Error: The localroot does not exist: /usr/sap/EPD/JC61/j2ee/cluster/server0/
fendercorp\FMICDealers
Thanks
Sushanth

Hi
A general recommendation would be to use small letters in all ID's regardring network drives, repositories etc. See https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/002fb447-d670-2910-67a5-bfbbf0bb287d for advice on how to optimize performance of KM.
Other than that, you could check the documentation mentioned here:
https://www.sdn.sap.com/irj/sdn/message?messageID=6398301#6398301
It seems as the root directory in your File System Repository Manager is not defined correctly. It should be forward slash instead of backslash.
Go through the settings again and see if the startup error changes or disappears. The startup error indecated that it is a configuration error.
Best regards,
Martin Søgaard

Maown - file system monitor for shared group directories

Maown Info Page
I needed a way to manage ownership and permissions of files in a shared directory. ACLs and "chmod g+s" alone were not enough so I wrote maown.
Maown is a file system monitor written in C. It uses inotify to recursively watch a directory tree for file creation and attribute modification. It automatically chowns files to user:group and adjusts group permissions to match user permissions.
The package includes a daemon with a simple configuration file. Each line in the configuration file specifies a user, a group and a list of directories to monitor:
<user> <group> <directory> [<directory>...]
Last edited by Xyne (2012-05-21 02:35:24)

Maown has been replaced with Autochown.

File system used space monitoring rule

All, I'm trying to change the way OC monitors disk space usage. I don't want it to report on nfs filesystems, except from the server from which they are shared.
The monitored attribute is FileSystemUsages.name=*.usedSpacePercentage.
I'd like it to only report on ufs and zfs filesystems. I've tried to create new rules using the attribures:
FileSystemUsages.type=ufs.usedSpacePercentage
FileSystemUsages.type=UFS.usedSpacePercentage
FileSystemUsages.type=zfs.usedSpacePercentage
FileSystemUsages.type=ZFS.usedSpacePercentage
But I don't get any alerts generated on system which I know violate the thresholds I've specified.
Has anybody successfully set up rules like these? Am I on the right track? do ufs/UFS/zfs/ZFS need to be single or double quoted? Documentation with various examples is non-existent as far as I can tell.
Any help is greatly appreciated
Tim

do you get any answers for this question? It seems like OEM12c has file system space usage monitoring setup for nfs mounted file systems, however I could not find a place to specify the threshold for those nfs mounted file sytems except root file system. does anybody know how to setup threshold of nfs mounted file systems(Netapp storage)? thank you very much

Getting no file found under the given path- VNX-Family Monitoring and Reporting

Server- Windows-2012 R2
Using v21 of setup-vnx-mr-v21-win64
Using NAVCLI-Win-32-x86-en_US-7.33.6.0.96-1
Installed VNX-Family Monitoring and Reporting w/o any issues. Set user permissions.getting
Attempting to add VNX5400
I am using direct IP address: 10.X.X.X, Getting no file found under the given path error.
Any suggestions?
An using correct permissions
Thanks
This topic first appeared in the Spiceworks Community

Server- Windows-2012 R2
Using v21 of setup-vnx-mr-v21-win64
Using NAVCLI-Win-32-x86-en_US-7.33.6.0.96-1
Installed VNX-Family Monitoring and Reporting w/o any issues. Set user permissions.getting
Attempting to add VNX5400
I am using direct IP address: 10.X.X.X, Getting no file found under the given path error.
Any suggestions?
An using correct permissions
Thanks
This topic first appeared in the Spiceworks Community

I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported? I am on a Mac using Parallels 6

I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan

Read only file system

One of my Parabola installations has started to always mount the / partition read-only. I've booted into a different install on the same machine, and can mount the affected partition without problems. I've done a fsck, and run the SMART disk checks. No problems. I've touched /forcefsck so a file system check is done every time I boot, but still the partition is read-only when it finishes booting.
This is the output of 'mount':
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
sys on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
dev on /dev type devtmpfs (rw,nosuid,relatime,size=1024388k,nr_inodes=256097,mode=755)
run on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
/dev/sdb10 on / type ext4 (ro,relatime,data=ordered)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
/dev/sdb9 on /boot type ext4 (rw,relatime,data=ordered)
/dev/sdb1 on /media/Stuff type fuseblk (rw,nosuid,nodev,noexec,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096)
binfmt on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
This is the output of 'dmesg':
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.3-1-LIBRE (nobody@root) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Tue Oct 23 00:29:01 UYST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-libre root=UUID=f0206707-f1ca-4bea-9eb3-c5d3713e4a4e ro resume=UUID=5b4248ba-30c3-48e5-a090-3a9c9f49d9c4 quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ff90000-0x000000007ff9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ff9e000-0x000000007ffcffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ffe0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/P5KPL-CM, BIOS 0702 08/27/2010
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x7ff90 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x7ff8ffff]
[ 0.000000] [mem 0x00000000-0x7fdfffff] page 2M
[ 0.000000] [mem 0x7fe00000-0x7ff8ffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x7ff8ffff @ [mem 0x1fbfd000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x37a10000-0x37cfffff]
[ 0.000000] ACPI: RSDP 00000000000fb6a0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ff90000 0003C (v01 A_M_I_ OEMRSDT 08001027 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ff90200 00084 (v02 A_M_I_ OEMFACP 08001027 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ff905c0 07BFA (v01 A0968 A0968000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007ff9e000 00040
[ 0.000000] ACPI: APIC 000000007ff90390 0006C (v01 A_M_I_ OEMAPIC 08001027 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ff90400 0003C (v01 A_M_I_ OEMMCFG 08001027 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ff9e040 00080 (v01 A_M_I_ AMI_OEM 08001027 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ff981c0 00038 (v01 A_M_I_ OEMHPET 08001027 MSFT 00000097)
[ 0.000000] ACPI: GSCI 000000007ff9e0c0 02024 (v01 A_M_I_ GMCHSCI 08001027 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007ff8ffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7ff8ffff]
[ 0.000000] NODE_DATA [mem 0x7ff8c000-0x7ff8ffff]
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ff8ffff]
[ 0.000000] On node 0 totalpages: 524063
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8127 pages used for memmap
[ 0.000000] DMA32 zone: 511953 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s84608 r8192 d21888 u524288
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515866
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-libre root=UUID=f0206707-f1ca-4bea-9eb3-c5d3713e4a4e ro resume=UUID=5b4248ba-30c3-48e5-a090-3a9c9f49d9c4 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2048780k/2096704k available (4726k kernel code, 452k absent, 47472k reserved, 4144k data, 772k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1613.131 MHz processor
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3227.68 BogoMIPS (lpj=5377103)
[ 0.003342] pid_max: default: 32768 minimum: 301
[ 0.003391] Security Framework initialized
[ 0.003397] AppArmor: AppArmor disabled by boot time parameter
[ 0.003643] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004961] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.005580] Mount-cache hash table entries: 256
[ 0.005927] Initializing cgroup subsys cpuacct
[ 0.005933] Initializing cgroup subsys memory
[ 0.005946] Initializing cgroup subsys devices
[ 0.005949] Initializing cgroup subsys freezer
[ 0.005951] Initializing cgroup subsys net_cls
[ 0.005953] Initializing cgroup subsys blkio
[ 0.005995] CPU: Physical Processor ID: 0
[ 0.005998] CPU: Processor Core ID: 0
[ 0.006000] mce: CPU supports 6 MCE banks
[ 0.006010] CPU0: Thermal monitoring enabled (TM2)
[ 0.006015] process: using mwait in idle threads
[ 0.006021] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift is 0xffffffff
[ 0.008169] ACPI: Core revision 20120711
[ 0.013350] ftrace: allocating 18348 entries in 72 pages
[ 0.026962] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059974] smpboot: CPU0: Intel(R) Celeron(R) CPU E1200 @ 1.60GHz stepping 0d
[ 0.059996] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.059996] perf_event_intel: PEBS disabled due to CPU errata
[ 0.059996] ... version: 2
[ 0.059996] ... bit width: 40
[ 0.059996] ... generic registers: 2
[ 0.059996] ... value mask: 000000ffffffffff
[ 0.059996] ... max period: 000000007fffffff
[ 0.059996] ... fixed-purpose events: 3
[ 0.059996] ... event mask: 0000000700000003
[ 0.083501] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096681] smpboot: Booting Node 0, Processors #1
[ 0.109825] Brought up 2 CPUs
[ 0.109825] smpboot: Total of 2 processors activated (6455.37 BogoMIPS)
[ 0.110104] devtmpfs: initialized
[ 0.112186] PM: Registering ACPI NVS region [mem 0x7ff9e000-0x7ffcffff] (204800 bytes)
[ 0.112186] NET: Registered protocol family 16
[ 0.112186] ACPI: bus type pci registered
[ 0.112186] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.112186] PCI: not using MMCONFIG
[ 0.112186] PCI: Using configuration type 1 for base access
[ 0.113367] bio: create slab <bio-0> at 0
[ 0.113401] ACPI: Added _OSI(Module Device)
[ 0.113401] ACPI: Added _OSI(Processor Device)
[ 0.113401] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.113401] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.114233] ACPI: EC: Look up EC in DSDT
[ 0.116040] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.122816] ACPI: SSDT 000000007ffa00f0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.122816] ACPI: Dynamic OEM Table Load:
[ 0.122816] ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.122816] ACPI: SSDT 000000007ffa02d0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.122816] ACPI: Dynamic OEM Table Load:
[ 0.122816] ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.122816] ACPI: Interpreter enabled
[ 0.122816] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.122816] ACPI: Using IOAPIC for interrupt routing
[ 0.122816] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.122816] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.136077] ACPI: No dock devices found.
[ 0.136086] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.136182] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.136328] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.136382] PCI host bridge to bus 0000:00
[ 0.136387] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.136390] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.136394] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.136397] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.136400] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.136403] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.136406] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
[ 0.136420] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.136478] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.136533] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.136587] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.136606] pci 0000:00:1b.0: reg 10: [mem 0xfe9fc000-0xfe9fffff 64bit]
[ 0.136697] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.136723] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.136803] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.136831] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.136910] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.136941] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.136986] pci 0000:00:1d.0: reg 20: [io 0xc480-0xc49f]
[ 0.137022] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.137067] pci 0000:00:1d.1: reg 20: [io 0xc800-0xc81f]
[ 0.137108] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.137153] pci 0000:00:1d.2: reg 20: [io 0xc880-0xc89f]
[ 0.137190] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.137235] pci 0000:00:1d.3: reg 20: [io 0xcc00-0xcc1f]
[ 0.137282] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.137304] pci 0000:00:1d.7: reg 10: [mem 0xfe9fbc00-0xfe9fbfff]
[ 0.137395] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.137419] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.137491] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.137581] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.137630] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.137645] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.137656] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.137667] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7]
[ 0.137678] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb]
[ 0.137689] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.137730] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.137747] pci 0000:00:1f.2: reg 10: [io 0xc400-0xc407]
[ 0.137757] pci 0000:00:1f.2: reg 14: [io 0xc080-0xc083]
[ 0.137767] pci 0000:00:1f.2: reg 18: [io 0xc000-0xc007]
[ 0.137777] pci 0000:00:1f.2: reg 1c: [io 0xbc00-0xbc03]
[ 0.137786] pci 0000:00:1f.2: reg 20: [io 0xb880-0xb88f]
[ 0.137827] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.137845] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.137901] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.137974] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
[ 0.137991] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
[ 0.138008] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.138021] pci 0000:01:00.0: reg 18: [mem 0xfeac0000-0xfeadffff 64bit]
[ 0.138031] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.138047] pci 0000:01:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref]
[ 0.138085] pci 0000:01:00.0: supports D1 D2
[ 0.138109] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
[ 0.138125] pci 0000:01:00.1: reg 10: [mem 0xfeafc000-0xfeafffff 64bit]
[ 0.138195] pci 0000:01:00.1: supports D1 D2
[ 0.138231] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.138236] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.138240] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.138246] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.138291] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
[ 0.138295] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.138347] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.138372] pci 0000:02:00.0: [1969:1026] type 00 class 0x020000
[ 0.138398] pci 0000:02:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.138412] pci 0000:02:00.0: reg 18: [io 0xec00-0xec7f]
[ 0.138519] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.138544] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.138555] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.138560] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.138565] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.138595] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff]
[ 0.138642] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.138654] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.138657] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.138660] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.138663] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.138666] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.138689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.138794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.138867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.138903] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.138963] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.138967] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.145009] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.145073] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.145128] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 11 12 14 15)
[ 0.145187] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.145246] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.145306] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.145365] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.145425] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 11 12 14 15)
[ 0.146698] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.146703] vgaarb: loaded
[ 0.146705] vgaarb: bridge control possible 0000:01:00.0
[ 0.146775] PCI: Using ACPI for IRQ routing
[ 0.147301] PCI: pci_cache_line_size set to 64 bytes
[ 0.147387] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.147389] e820: reserve RAM buffer [mem 0x7ff90000-0x7fffffff]
[ 0.147545] NetLabel: Initializing
[ 0.147548] NetLabel: domain hash size = 128
[ 0.147550] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.147571] NetLabel: unlabeled traffic allowed by default
[ 0.147588] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.147593] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.147599] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.166686] Switching to clocksource hpet
[ 0.177018] pnp: PnP ACPI init
[ 0.177044] ACPI: bus type pnp registered
[ 0.177174] pnp 00:00: [bus 00-ff]
[ 0.177179] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.177182] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.177186] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.177189] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.177192] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.177195] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.177279] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.177295] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.177363] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.177369] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.177419] pnp 00:02: [dma 4]
[ 0.177423] pnp 00:02: [io 0x0000-0x000f]
[ 0.177426] pnp 00:02: [io 0x0081-0x0083]
[ 0.177429] pnp 00:02: [io 0x0087]
[ 0.177431] pnp 00:02: [io 0x0089-0x008b]
[ 0.177434] pnp 00:02: [io 0x008f]
[ 0.177437] pnp 00:02: [io 0x00c0-0x00df]
[ 0.177478] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.177494] pnp 00:03: [io 0x0070-0x0071]
[ 0.177508] pnp 00:03: [irq 8]
[ 0.177544] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.177557] pnp 00:04: [io 0x0061]
[ 0.177595] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.177609] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.177617] pnp 00:05: [irq 13]
[ 0.177654] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.178000] pnp 00:06: [irq 6]
[ 0.178004] pnp 00:06: [dma 2]
[ 0.178007] pnp 00:06: [io 0x03f0-0x03f5]
[ 0.178010] pnp 00:06: [io 0x03f7]
[ 0.178096] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.178501] pnp 00:07: [irq 7]
[ 0.178504] pnp 00:07: [dma 3]
[ 0.178508] pnp 00:07: [io 0x0378-0x037f]
[ 0.178511] pnp 00:07: [io 0x0778-0x077f]
[ 0.178686] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.178731] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.178735] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.178738] pnp 00:08: [io 0x0290-0x0297]
[ 0.178815] system 00:08: [io 0x0290-0x0297] has been reserved
[ 0.178821] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178918] pnp 00:09: [io 0x0010-0x001f]
[ 0.178922] pnp 00:09: [io 0x0022-0x003f]
[ 0.178925] pnp 00:09: [io 0x0044-0x005f]
[ 0.178928] pnp 00:09: [io 0x0062-0x0063]
[ 0.178934] pnp 00:09: [io 0x0065-0x006f]
[ 0.178937] pnp 00:09: [io 0x0072-0x007f]
[ 0.178939] pnp 00:09: [io 0x0080]
[ 0.178942] pnp 00:09: [io 0x0084-0x0086]
[ 0.178945] pnp 00:09: [io 0x0088]
[ 0.178948] pnp 00:09: [io 0x008c-0x008e]
[ 0.178951] pnp 00:09: [io 0x0090-0x009f]
[ 0.178953] pnp 00:09: [io 0x00a2-0x00bf]
[ 0.178956] pnp 00:09: [io 0x00e0-0x00ef]
[ 0.178959] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.178962] pnp 00:09: [io 0x0800-0x087f]
[ 0.178965] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.178968] pnp 00:09: [io 0x0480-0x04bf]
[ 0.178971] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.178974] pnp 00:09: [mem 0xfed20000-0xfed8ffff]
[ 0.179068] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.179072] system 00:09: [io 0x0800-0x087f] has been reserved
[ 0.179076] system 00:09: [io 0x0480-0x04bf] has been reserved
[ 0.179080] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.179083] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.179089] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179173] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.179219] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.179280] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
[ 0.179284] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.179332] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.179387] pnp 00:0c: [mem 0xffc00000-0xffefffff]
[ 0.179460] system 00:0c: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.179466] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179524] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[ 0.179528] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[ 0.179608] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.179612] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.179617] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.179660] pnp 00:0e: [io 0x0060]
[ 0.179663] pnp 00:0e: [io 0x0064]
[ 0.179673] pnp 00:0e: [irq 1]
[ 0.179734] pnp 00:0e: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.179796] pnp 00:0f: [irq 12]
[ 0.179852] pnp 00:0f: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.180166] pnp 00:10: [irq 4]
[ 0.180170] pnp 00:10: [dma 0 disabled]
[ 0.180173] pnp 00:10: [io 0x03f8-0x03ff]
[ 0.180292] pnp 00:10: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.180342] pnp 00:11: [mem 0xf0000000-0xf3ffffff]
[ 0.180427] system 00:11: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.180433] system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.180636] pnp 00:12: [mem 0x00000000-0x0009ffff]
[ 0.180640] pnp 00:12: [mem 0x000c0000-0x000cffff]
[ 0.180643] pnp 00:12: [mem 0x000e0000-0x000fffff]
[ 0.180646] pnp 00:12: [mem 0x00100000-0x7fffffff]
[ 0.180649] pnp 00:12: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.180743] system 00:12: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.180747] system 00:12: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.180751] system 00:12: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.180754] system 00:12: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.180760] system 00:12: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.180916] pnp: PnP ACPI: found 19 devices
[ 0.180919] ACPI: ACPI bus type pnp unregistered
[ 0.188605] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.188613] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.188617] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.188628] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.188646] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.188650] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.188653] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.188657] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.188664] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[ 0.188668] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.188673] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.188678] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.188683] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.188687] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.188693] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.188697] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.188703] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.188707] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.188713] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.188718] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.188725] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.188729] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.188735] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.188740] pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.188747] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.188784] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.188805] pci 0000:00:1e.0: setting latency timer to 64
[ 0.188810] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.188814] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.188817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.188820] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.188824] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.188827] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.188830] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.188833] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.188836] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.188840] pci_bus 0000:03: resource 1 [mem 0x80000000-0x801fffff]
[ 0.188843] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.188846] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.188849] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.188852] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.188856] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.188859] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.188862] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.188865] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.188868] pci_bus 0000:04: resource 8 [mem 0x80000000-0xffffffff]
[ 0.188916] NET: Registered protocol family 2
[ 0.189551] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.192082] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.192686] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.192758] TCP: reno registered
[ 0.192773] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.192798] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.192949] NET: Registered protocol family 1
[ 0.193147] pci 0000:01:00.0: Boot video device
[ 0.193158] PCI: CLS 32 bytes, default 64
[ 0.193230] Unpacking initramfs...
[ 0.285578] Freeing initrd memory: 3008k freed
[ 0.287514] audit: initializing netlink socket (disabled)
[ 0.287533] type=2000 audit(1351450895.286:1): initialized
[ 0.303689] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.306261] VFS: Disk quotas dquot_6.5.2
[ 0.306342] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.306570] msgmni has been set to 4007
[ 0.306904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.306951] io scheduler noop registered
[ 0.306955] io scheduler deadline registered
[ 0.307043] io scheduler cfq registered (default)
[ 0.307215] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.307324] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.307443] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.307659] intel_idle: does not run on family 6 model 15
[ 0.307698] GHES: HEST is not enabled!
[ 0.307788] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.328340] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.349279] 00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.349579] Linux agpgart interface v0.103
[ 0.349708] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.352389] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.352444] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.352607] mousedev: PS/2 mouse device common for all mice
[ 0.352700] rtc_cmos 00:03: RTC can wake from S4
[ 0.352865] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.352896] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.352913] cpuidle: using governor ladder
[ 0.352915] cpuidle: using governor menu
[ 0.353088] drop_monitor: Initializing network drop monitor service
[ 0.353195] TCP: cubic registered
[ 0.353379] NET: Registered protocol family 10
[ 0.353609] NET: Registered protocol family 17
[ 0.353626] Key type dns_resolver registered
[ 0.353965] PM: Checking hibernation image partition UUID=5b4248ba-30c3-48e5-a090-3a9c9f49d9c4
[ 0.377050] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.398600] PM: Hibernation image not present or could not be loaded.
[ 0.398629] registered taskstats version 1
[ 0.399166] rtc_cmos 00:03: setting system clock to 2012-10-28 19:01:35 UTC (1351450895)
[ 0.400807] Freeing unused kernel memory: 772k freed
[ 0.401093] Write protecting the kernel read-only data: 8192k
[ 0.407007] Freeing unused kernel memory: 1408k freed
[ 0.410355] Freeing unused kernel memory: 652k freed
[ 0.424642] systemd-udevd[42]: starting version 194
[ 0.484567] ACPI: bus type usb registered
[ 0.484613] usbcore: registered new interface driver usbfs
[ 0.484629] usbcore: registered new interface driver hub
[ 0.484994] usbcore: registered new device driver usb
[ 0.485924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.485981] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.485987] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.485997] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.489913] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.489922] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.489951] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe9fbc00
[ 0.493550] SCSI subsystem initialized
[ 0.496118] ACPI: bus type scsi registered
[ 0.496720] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.497003] hub 1-0:1.0: USB hub found
[ 0.497013] hub 1-0:1.0: 8 ports detected
[ 0.497923] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.497967] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.497972] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.497982] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.498020] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 0.498143] libata version 3.00 loaded.
[ 0.499305] hub 2-0:1.0: USB hub found
[ 0.499317] hub 2-0:1.0: 2 ports detected
[ 0.499540] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.499547] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.499557] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.499610] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.500253] hub 3-0:1.0: USB hub found
[ 0.500264] hub 3-0:1.0: 2 ports detected
[ 0.500442] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.500448] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.500463] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.500512] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 0.500811] hub 4-0:1.0: USB hub found
[ 0.500822] hub 4-0:1.0: 2 ports detected
[ 0.501016] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.501022] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.501039] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.501090] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[ 0.502169] hub 5-0:1.0: USB hub found
[ 0.502179] hub 5-0:1.0: 2 ports detected
[ 0.502422] ata_piix 0000:00:1f.1: version 2.13
[ 0.502499] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.503963] scsi0 : ata_piix
[ 0.504744] scsi1 : ata_piix
[ 0.505372] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.505378] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.505429] ata_piix 0000:00:1f.2: MAP [
[ 0.505431] P0 P2 P1 P3 ]
[ 0.505484] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.507566] scsi2 : ata_piix
[ 0.508975] scsi3 : ata_piix
[ 0.509624] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[ 0.509630] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[ 0.684177] ata3.00: ATA-8: WDC WD6400AAKS-00A7B2, 01.03B01, max UDMA/133
[ 0.684184] ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.691230] ata3.00: configured for UDMA/133
[ 0.691417] scsi 2:0:0:0: Direct-Access ATA WDC WD6400AAKS-0 01.0 PQ: 0 ANSI: 5
[ 0.699349] sd 2:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 0.699463] sd 2:0:0:0: [sda] Write Protect is off
[ 0.699468] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.699516] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.774080] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 0.775132] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.096765] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 1.275214] usbcore: registered new interface driver usbhid
[ 1.275219] usbhid: USB HID core driver
[ 1.276959] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
[ 1.277358] hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 1.290145] tsc: Refined TSC clocksource calibration: 1613.217 MHz
[ 1.290153] Switching to clocksource tsc
[ 1.426263] PM: Starting manual resume from disk
[ 1.426269] PM: Hibernation image partition 8:8 present
[ 1.426271] PM: Looking for hibernation image.
[ 1.426530] PM: Image not found (code -22)
[ 1.426535] PM: Hibernation image not present or could not be loaded.
[ 1.648559] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 12.388263] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 12.459036] fuse init (API version 7.20)
[ 13.150864] Adding 1951860k swap on /dev/sda8. Priority:-1 extents:1 across:1951860k
[ 0.691798] ACPI: Invalid Power Resource to register!
[ 14.060519] synergys[417]: segfault at 0 ip 0000000000449fa9 sp 00007fff68a19a90 error 4
[ 14.060531] in synergys[400000+cb000]
(I disconnected the second hard drive in the machine to verify that it wasn't causing problems. Hence the sda / sdb discrepancy)
I've been able to mount the partitions and chroot into them, but I don't know what to do from here. Oddly, I've discovered that 'ls' doesn't output anything, although bash completion seems to work ok.
Any ideas on what I should do to get my system running again?
Thanks in advance,
Bernie

Have you read the forum rules? Asking for support for Parabola isn't going to get you very far.
https://wiki.archlinux.org/index.php/Fo … pport_ONLY

Bad file system performance in OS X Mavericks

After installing OS X Mavericks I experience bad file system performance approx. three times per day: Opening Finder and trying to a access a directory gets my MacBook Air (1.8 GHz Intel Core i7 4 GB 1333 MHz DDR3 with 250 GB Flash) stuck every approx. 10th time, not always. Same on my brandnew MacBook Pro 2.6 GHz Intel Core i7, 16 GB 1600 MHz DDR3 with 1 TB Flash. This is not a hardware problem. It is a Mavericks problem. Under Mountain Lion I did not have any problems.
Is there any way to get rid of the annoying wait cycles?

Output of EtreCheck follows:
Hardware Information:
          MacBook Pro (Retina, 15-inch, Late 2013)
          MacBook Pro - model: MacBookPro11,2
          1 2.6 GHz Intel Core i7 CPU: 4 cores
          16 GB RAM
Video Information:
          Intel Iris Pro - VRAM: 1024 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
          OS X 10.9.1 (13B3116) - Uptime: 1 day 20:52:39
Disk Information:
          APPLE SSD SM1024F disk0 : (1 TB)
                    EFI (disk0s1) <not mounted>: 209,7 MB
                    Macintosh HD (disk0s2) /: 999,7 GB (797,68 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Internal Memory Card Reader
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
          Logitech USB Mouse
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
          org.virtualbox.kext.VBoxDrv          (4.1.8)
          org.virtualbox.kext.VBoxUSB          (4.1.8)
          com.avatron.AVExVideo          (1.7 - SDK 10.8)
          net.telestream.driver.TelestreamAudio          (1.0.4 - SDK 10.6)
          com.avatron.AVExFramebuffer          (1.7 - SDK 10.8)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded]          com.adobe.fpsaud.plist
          [loaded]          com.barebones.textwrangler.plist
          [loaded]          com.google.keystone.daemon.plist
          [loaded]          com.microsoft.office.licensing.helper.plist
          [loaded]          org.gpgtools.gpgmail.patch-uuid.plist
          [loaded]          org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
          [not loaded]          com.adobe.AAM.Updater-1.0.plist
          [loaded]          com.google.keystone.agent.plist
          [loaded]          org.gpgtools.gpgmail.enable-bundles.plist
          [loaded]          org.gpgtools.gpgmail.patch-uuid-user.plist
          [loaded]          org.gpgtools.Libmacgpg.xpc.plist
          [loaded]          org.gpgtools.macgpg2.fix.plist
          [loaded]          org.gpgtools.macgpg2.shutdown-gpg-agent.plist
          [loaded]          org.gpgtools.macgpg2.updater.plist
          [loaded]          org.macosforge.xquartz.startx.plist
User Launch Agents:
          [loaded]          com.adobe.ARM.[...].plist
          [not loaded]          org.virtualbox.vboxwebsrv.plist
User Login Items:
          Aktivitätsanzeige
          iTunesHelper
          SpeechSynthesisServer
          Microsoft Database Daemon
          EvernoteHelper
          ScreenFlowHelper
          AdobeResourceSynchronizer
          ScreenFlowHelper
          Dropbox
          Google Drive
          AirDisplayStatusItem
          ScreenCapture
          Air Display Host
          Google Chrome
          fuspredownloader
3rd Party Preference Panes:
          Flash Player
          Flip4Mac WMV
          GPGPreferences
          Pastebot Sync
Internet Plug-ins::
          Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          Default Browser: Version: 537 - SDK 10.9
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          QuickTime Plugin: Version: 7.7.3
          o1dbrowserplugin: Version: 4.9.1.16010
          npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
          googletalkbrowserplugin: Version: 4.9.1.16010
          Silverlight: Version: 5.1.20913.0 - SDK 10.6
User Internet Plug-ins::
          WebEx64: Version: 1.0 - SDK 10.6
          Google Earth Web Plug-in: Version: 7.1
Bad Fonts:
          None
Old applications:
          Audacity:          Version: 2.0.3.0 - SDK 10.4
                    /Applications/Audacity/Audacity.app
          Cisco WebEx Meetings:          Version: 1211.02.2808.0 - SDK 10.5
                    .../WebEx Folder/12_1324/Meeting Center.app
          Keynote:          Version: 5.3 - SDK 10.5
                    /Applications/iWork '09/Keynote.app
Time Machine:
          Skip System Files: NO
          Auto backup: YES
          Volumes being backed up:
          Destinations:
                    My Passport [Local] (Last used)
                    Total size: 931.16 GB
                    Total number of backups: 51
                    Oldest backup: 2011-12-16 12:40:10 +0000
                    Last backup: 2013-12-08 09:13:22 +0000
                    Size of backup disk: Excellent
                              Backup size 931.16 GB > (Disk size 0 B X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
              13%          coreaudiod
              10%          thunderbird
               9%          GarageBand
               3%          WindowServer
               1%          Activity Monitor
Top Processes by Memory:
          1.52 GB          GarageBand
          377 MB          thunderbird
          360 MB          WindowServer
          279 MB          Preview
          197 MB          Safari
Virtual Memory Statistics:
          7.41 GB          Free RAM
          5.80 GB          Active RAM
          858 MB          Inactive RAM
          1.63 GB          Wired RAM
          1.57 GB          Page-ins
          0 B          Page-outs

Oc 11gR1 update 3: doesn't show ZFS file systems created on brownfield zone

Subject is a pretty concise description here. I have several brownfield Solaris 10U10 containers running on M5000s, and I have delegated three zpool to each container for use by Oracle. Below is relevant output from zonecfg export for one of these containers. They were all built in the same manner, then placed under management by OC. (Wish I'd been able to build them as green field with Ops Center, but there just wasn't enough time to learn how to configure OpsCenter the way I needed to use it.)
set name=Oracle-DB-Instance
set type=string
set value="Oracle e-Business Suite PREPROD"
end
add dataset
set name=PREPRODredoPOOL
end
add dataset
set name=PREPRODarchPOOL
end
add dataset
set name=PREPRODdataPOOL
end
The problem is, none of the file systems built on these delegated pools in the container appear in the Ops Center File System Utilization charts. Does anyone have a suggestion for how to get OC to monitor the file systems in the zone?
Here's the output from zfs list within the zone described by the zonecfg output above:
[root@acdpreprod ~]# zfs list
NAME USED AVAIL REFER MOUNTPOINT
PREPRODarchPOOL 8.91G 49.7G 31K none
PREPRODarchPOOL/d05 8.91G 49.7G 8.91G /d05
PREPRODdataPOOL 807G 364G 31K none
PREPRODdataPOOL/d02 13.4G 36.6G 13.4G /d02
PREPRODdataPOOL/d03 782G 364G 782G /d03
PREPRODdataPOOL/d06 11.4G 88.6G 11.4G /d06
PREPRODredoPOOL 7.82G 3.93G 31K none
PREPRODredoPOOL/d04 7.82G 3.93G 7.82G /d04
None of the file systems in the delegated datasets appear in Ops Center for this zone. Are there any suggestions for how I correct this?

Do you mean adopt the zone? That requires the zone be halted and it also says something about copying all file systems to the pool created for the zone. Of the 12 zones I have (four on each of three M5000s), seven of them are already in "production" status, and four of those seven now support 7x24 world-wide operations. A do-over is not an option here.

Create a file system repository

Hi all,
when I create a file system repository in the following solution:
System Administration → System Configuration→Knowledge Management→Content Management→Repository Managers → File System Repository
There I input the name and the URL which is available on the server.
Then I go to Content Administration → KM Content to check the content of the repository I have created , I can find the folder in the first level directory, but why I can't find the text file I create under the second level .
such as: URL C:/kmtest
        on the server   C:/kmtest/1
                             C:/kmtest/1/1.text
(I can see the folder 1, but when I click this fodler on the portal , I can see nothing.)
When I use System Administration → Monitoring → Knowledge
Management → Component Monitor to check the status of the repository , I find it was not in green light .
Then what is the reason ? Thank you if you can help me !

Check permissions of that folder give full permissions.
Create a File System Repository
You map a network drive from the Portal server and create the file repository in the Portal.
Procedure
To map a network drive from the portal server
1.     Log on to the Windows Server of the Portal.
2.     From the Microsoft Windows Start menu, open Windows Explorer.
3.     Choose Tools  Map Network Drive.
4.     Specify the drive letter for the connection (say V :).
5.     In Folder, enter the path of the shared folder, (
kmtest)and choose Finish.
Create the File Repository in the Portal
1.     Choose System Administration  System Configuration  Knowledge Management  Content Management  Repository Managers  File System Repository.
2.     Choose New.
3.     Enter a prefix that describes your folder.
4.     Enter the value of the drive letter you mapped previously with a forward slash.(/kmtest)
5.     (optional) Select the checkboxes for layout and properties from Repository Services.
6.     Choose OK.

Unable to create File System Repository manager

Hello,
I would like to create File System Repository manager to this path: I have mapped a certain Network drive "
main-uni-fs1\pictures$" to the Portal Machine and under this machine it appears as drive "N:\", inside it there is a picture folder which I would like to create the mapping to. I tried setting the "Root Directory" value to "N:\" and to "
main-uni-fs1\pictures$" but I keep receiving an error message at the Repository Component Monitor (see below).
10X,
Roy

Hello Roy,
1> Create a new path that points to the pictures directory on the system. Enter the path lik
mypc.myorg.com\pictures
Under Sys admin -> Sys Config -> KM -> Content MGT -> Global Services -> Network path
Under the user name and password, enter your username and password
username whould be entered like domainname\username
2>Then create a system in for the mypc.myorg.com server under
Sys admin -> Sys Config -> KM -> Content MGT -> Global Services -> System landscape definitions -> System -> Windows Sytem.
(Assuming u are acessing a windows sytem from a portal running on windows platform).
You need to enter system id and description . Kindly remember the system id, since it would be useful in two places while usermapping and creating the file system repository.
3>create a file system rep mgr under
Sys admin -> Sys Config -> KM -> Content MGT -> Repository Managers > File System Repository
Following properties are most important.
Name , ACL manager cache, Security manager(which you would have to set to W2kSecurity manager)
prefix(this is the folder name that you will identify your repository with) Widws landscape System (this is the sytem id of step 2) and root directory (network path of first step only in this case enter it like this //mypc.myorg.com/pictures)
4>Then under user mapping section, you will find you system (the system id of second step) , enter your name as password.
Initially when you configure your rep manager, you dont need to start ur servlet engine. If you modify any property then you need to re start ur servlet engine.
These are the steps for creating repository
If this still does not get resolved. Then kindly read the limitations of creating the file system repository manager in the link that I had posted in my earlier post.
Thanks and Regards
Pradeep Bhojak

Monitor file system under SMC 3.5

Similar Messages

Maybe you are looking for