Monitor goes black for a few seconds then recovers

This has been a great machine. Since 2014, the Monitor keeps going blank for 3/4 seconds then comes back. I have done my driver search and have installed the updated driver software but the problem persists. Please help. Bijou

Yeah, I'm using the HP2210m monitor to another computer with the same cable. The end result is the monitor seems to be working okay.
The other monitor I test to my computer is a different type of monitor and using a different cable. The end result is the other monitor stays up.
Basically, here's the situation
My computer (computer A)
My HP 2210m monitor (monitor A)
My DIVX cable (Cable A1), My VGA cable (Cable A2)
My Nvidia 560ti video card (Video Card A)
My Windows 7 Platform
Other computer (computer B)
Other NEC monitor (monitor B)
Other VGA cable (Cable B)
Other integrated video card (Video Card B)
Other Windows XP Platform
So here's the set ups:
1) Computer A + Monitor A + Cable A + Video Card A = Monitor starts blinking
2) Computer B + Monitor B + Cable B + Video Card B = Everything okay
3) Computer A + Monitor B + Cable B + Video Card A = Everything okay
4) Computer B + Monitor A + Cable A + Video Card B = Everything okay
I will try testing set up 1 (My computer) with Bios and Safe Mode. I'm not even sure if my computer came with an integrated video card since I had the computer built with another stand alone video card (an ATI) before I switched to an Nvidia. Just in case you were going to ask, I no longer have the ATI card in the machine and I used Guru Sweeper to completely remove all left over driver information from the ATI.

Similar Messages

Macbook screen goes black for a few seconds then reappears fine

The last two days my macbook screen has gone black for a few seconds then reappeared a few seconds later. Its as if it goes to sleep for a few seconds. The two times it has done this it has been charging. I have checked for hotspots but i have not activated any. I only bought the macbook air two months ago and have been really careful with it so i am confused.
any help? Please?
Thanks people.

Hello @bobbiy58,
I understand that your HP ENVY Recline 27-k150xt TouchSmart All-in-One CTO Desktop PC is going black for few seconds and coming back. I need to ask has this just started? Like since you connected your X-box? If so have you tried disconnecting the X-box to see if it stops?
Please re-post and let me know. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Macbook Pro 2013 HDMI Monitor Goes Black for a few seconds

So I purchased a brand new Macbook Pro 2013 (specs below) and for the entire time I have been using it with a BenQ RL2455 via HDMI with no problems at all. Recently though I have started to experience problems between the computer and the monitor. There is no particular sequence as to when this will happen but the monitor screen just goes completely black for a couple of seconds, and then goes back to normal.
There is nothing to suggest that the monitor is being disconnected from the mac, as it still detects the fact that the two are still connected. I have followed each cable back to the source and they all seem to be properly connected.
As you can imagine, this is very annoying and inconvenient, and it would be much appreciated if anyone knows any solutions to this. I just thought i'd see if there was anything i could do before i contacted apple, just incase i was being a total idiot and missing something obvious!
Thanks!
Specs:
Macbook Pro Retina 2013
2.6GHz Intel Core i7
16GB Ram
1TB SSD

15" or 13"? How long have to had it?
I've noticed my HDMI monitor comes up blank on reboot sometimes. Using a late 2013 MBP Retina 13" for a couple of days now.

I have a macbook pro and the screen goes black for a few seconds and then it is fine..

it keeps doing this constantly. Goes black and then is fine. I tried to do the apple hardware test and it doesn't work. Ever since i updated the software on it it's been giving me problems. What do i do?

Nellinaaaa wrote:
13" mid 2012!
If you have AppleCare, call them. Let them deal w/it.
I tried to do the apple hardware test and it doesn't work.
Meaning? Please provide details.

Nano 6th turns on for a few seconds then screen goes black and nothing. what is wrong with it....

My 6th gen nano turns on for a few seconds, then screen goes black and nano goes off. what is wrong with it? can any one help me out? do I need new battery? do I need a full repair? or is there something I can do myself to fix it. Thanks for your help.

At the moment I say as I've fixed, momentarily:
I made a downgrade to 1.0
The problem, gentlemen, is the upgrade from 1.1 and 1.2
It is a pity that I lost all the new features offered by the new firmware , just because Apple staff could not think to try this new update, on ipods with some airtime.
I hope Apple pull out a version 1.3 with the ability to choose the feature detection, and the user can disable it at will.

My iPhone 3G phone button no longer works. If I push it I get a black screen for a few seconds then back to the home screen. Everything else is ok. Any ideas how to fix this?

The phone button on my iPhone 3G no longer works. Everything else on the iPhone works fine. I can receive incoming calls. I can make calls directly from Contacts. But if I press the phone button I get a blank white screen for a few seconds then it goes back to the home screen. I've tried the hard reset and also restoring orignall settings via iTunes but keep getting the same problem. Does anyone know how to fix this?
Thank you, Neil.

Thanks for the advice but I've tried resetting network settings and also the reset by pressing home and sleep buttons until getting the Apple logo. Still have the same problem. To be clear (because I mistakenly typed black instead of blank in the title to this thread): If I press the phone button I get a BLANK WHITE screen for a few seconds then it goes back to the home screen. I doubt it's the SIM card as I can receive calls and make them directly from contacts. What I can't do is view my favourite numbers or missed calls or access my voicemail, i.e. all the things you get to via pressing the phone button.

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

You can take some of the steps here, #4, #5 or even trying a #18
Step by Step to fix your Mac
but I suspect your going to first have to create a data recovery drive
Create a data recovery, undelete boot drive
to get your data off the machine,
then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
Step by Step to fix your Mac

I cannot sync my iphone 4 to my imac it connects for a few seconds then goes off

please can someone help me When i connect my iphone 4 to my imac using bluetooth it pairs up but only lasts for a few seconds then goes off and shows
not connected i have tried all sorts of ways but without success why is this happening am i the only one does anyone know the answer please

Seems like my problem - I have a new iPhone 4 and it does not want to pair with any device. It seems to connect, and is recognised by my MacBook pro, it shows the code that my Macbook shows, but then says it cannot connect. Neither did it connect to another imac, nor does it connect to my carphone. Have received a replacement (as I had bought the iPhone five days ago), have a new one now, but exactly the same problem. But I cannot alter the bluetooth settings on my iPhone, and restoring does nothing, nor leaving it in the completely unaltered setting, nor switching off all other wireless devices. Does anybody know how to solve this?
Arnold

Ipod touch 5th generation battery screen with lightning bolt locked cannot charge or restart. ive tried everything from new cables attempting to shut down but stays at screen for a few seconds then black screen again over and over

screen locked up and shows the battery with low red and ligtning bolt and cannot hard shut down or reset just stays there for a few seconds then black screen. hooked up to computer and itunes doesnt recognize it or even shows that it is pluged in. looked and made sure nothing is broken or metal in ligting port or on cable which would prevent it from accepting a charge. ipod is only a month old and seems like a waste of money if its so hard to try to get an explanation of why this is ive been tryning to get an answer from apple for a week now.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please?

My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!

Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
Call Apple Care and see if your device is still under warranty to get it replace

U3415W, randomly goes black for like 2 seconds?

Just got this monitor and I'm having the exact same issue. Goes black for like 2 seconds randomly. It's differently on the monitor side of things, as I have another monitor connect through DP(daisy chain) and the same issue happens on that monitor as well. Both random, but sometimes at the same time with each. My third monitor which is connected through DVI has zero issues. I have tried the Dell without anything else connect, but getting the same issues.
Any ideas?

I am indeed, just a single mDP to DP was supplied. The issue was there with just that cable and the Dell monitor connected.
I have since turned off DP 1.2 on the monitor and the issue has gone away. Problem is that my graphics card supports DP 1.2, so that shouldn't have been causing any issues. (Sapphire R9 290 Vapor-X)
Dell support were support to contact be back again today so I can update them, but never got a call.

SB Live! 24Bit Works for a few seconds then st

my SB li've works for a few seconds then sto
ps.
if you mute it, then un mute it, it works for a few seconds and stops again. when it stops working it makes some low clicking sounds with no audio output, has anyone seen this before or have an suggestions, its not the speakers its definitly the soundcard.

more info:
i just purchased and installed the card
i have tried everything in the faqs
if u play music it goes in and outMessage Edited by noobguy on 07-0-2005 09:42 AM

Im trying to restore my iphone 4S, however i keep getting error 1611!, i have tried kicking the iphone out of recovery mode but then i have another problem, it gets stuck on the apple logo for a few seconds then the low battery symbol shows repeatdly HELP

Hi all, im trying to restore my iphone 4S, however i keep getting error 1611 i have tried uninstalling itunes and everything else related, i have tried kicking the iphone out of recovery mode but then it gets stuck on the apple logo for a few seconds then changes to the low battery symbol then goes back to the apple logo and this continues untill i put it back into recovery or dfu mode, i have tried everything can anyone help me ?? thank you!

Jai141 wrote:
... and im not sure as i brought the phone of someone else.. i will have to ask them
Good Luck.
Jai141 wrote:
Thanks
You're Welcome.

Why does my ipod classic (80gb) connect for a few seconds then disconnect?

I have a ipod classic 80gb, granted its old, but it has a big memory so I can store my whole collection. Anyway, when I connect it to my PC (with windows 8.1) it will connect for a few seconds then disconnect. It will sometimes start to sync, but then disconnect after a few seconds. My computer is pretty new, Acer Aspire V5. I have tried reinstalling itunes, a new cable to connect it, different usb ports(2) and with and without the pc plugged into the mains, which is when it starts to sync for a brief second. Has anyone else had the same problem??

The S.I. prefix Giga is used to mean both 1000x1000x1000 and 1024x1024x1024. Computer software typically uses the second version, but using the first number makes the same number of bytes appear bigger when expressed as Gb, so is favoured by hard drive manufactures.
80Gb10 = 74.3Gb2
It's a bit like specifying a quantity in gallons without saying whether they are US or Imperial gallons - everybody gets the same volume but one number will be bigger than the other. I could offer you a tank with 10 Imperial gallons of fuel in it - but if I tell you it's 12 US gallons it sounds like you're getting more for your money.
Once the total size of your library exceeds the capacity of your device all you need to do is create some size limited playlists to determine what goes on the device. Don't sync all movies, sync one or two that you plan to watch soon. Likewise with TV Shows. Limit podcasts to unplayed episodes and finally create a music subset. What worked for me for some time was a smart playlist called Steve's Tunes defined as Playlist is Music and Playlist is not Exclude where Exclude was regular playlist that I would manually add to until Steve's Tunes was small enough to fit. These days I run an iPhone and have a number of smart playlists with ? Gb of most played, ? Gb of highly rated, ? Gb of recently added, ? Gb of essentials, ? Gb of unplayed etc. Each time I sync I get slightly updated selection without having to put any extra effort in.
tt2

Voice Signal Goes Dead for a Few Seconds From Time to Time

I live in a rural part of Marin County that has poor signal: one bar or less. I've purchased a signal booster which has increased my bar level to 4 -- which is terrific. What I'm noticing however is that the voice signal goes dead for a few seconds (5 - 10 seconds) during a conversation. This happens every few minutes. Voice connectivity then returns for a few minutes only to cut off again for a few seconds and so on. This happens if I'm inside my house. If I go outside, it doesn't seem to happen. I've turned the booster box this way and that but no change. I've also changed the ariel this way and that, but no change. What's up with this? It's very annoying to be on a call and have the sound go dead.

Hi yraglleb - Let's keep your audio clear and consistent! What model is your Network Extender? May I also ask the current iOS version of your device? Check Settings>General>About. Have you tested other phones on the same Extender? I look forward to getting this resolved!
Thank you,
YaleK_VZW
Follow us on Twitter @VZWsupport

Monitor goes black for a few seconds then recovers

Similar Messages

Maybe you are looking for