Monitor hinge problem?

I got one of the brand new 21.5 models last month, and in my respects am very happy with it - pleasingly zippy and with no stuck pixels at all, which makes for quite a nice change. But I'm getting a little worried by the monitor hinge - it seems noticeably looser than my previous iMac and I have a regular sensation that the top of the monitor has tilted forward (or the bottom has tilted back, depending on how you look at it), so I keep fiddling with it. It's not massively obvious - I don't see any movement or tilting actually taking place, for example - so it's hard to be sure to what extent I'm simply imagining it, but...is this a known issue with these machines? Should I be concerned?

A slightly belated thank you. The screen feels fairly firm under my finger but I still have a strange sensation of the screen tilting forward over time. However, it may simply be an optical illusion - perhaps there is some subtle difference in the dimensions or orientation of this model that is confusing my eye. In any case, it doesn't seem a serious enough problem to warrant a trip to my nearest Apple service provider (about 15 miles away).

Similar Messages

GX700 Monitor Hinge Problem

Hey Please Move this into the right place of the forum if its not where it should be.
I was opening my notebook the other day and the hinge popped out instead of going down with the monitor.
A few plastic pieces fell out that where also holding the hinge inplace, and 2 screws that hold the outside of the case together.
My One year warrenty just expired about a month ago.
So if anyone knows anything i can do please let me know.
Or where could i get a new gx700 case or something.
thanks

Contact MSI >>How to contact MSI.<<
Try a ticket at http://ocss.msi.com.tw/
From the link you gave me, it seems you have a 2 year warranty. The Wind has 1 year warranty.

Hinge problem

Hi Everyone, I'm having the same hinge problem as a lot of other people with my Hp Envy m6. It's out of warranty and I'm just wondering what options I have. My laptop is everything to me as I'm in my last year of college and I'm also a DJ so it's an essential part of my life.
The bottom left of my monitor (the black plastic part) is cracked because of the hinges coming loose. I see a lot of other people are having the same problem but this is getting serious on my laptop as the screen is starting to flash if I move the laptop around. Could someone please point me in the right direction as it seems to be a problem with the hardware as a number of others are having the same problem.
Thank you for your time,Brendan Lambe.

‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar

Wierd monitor compatibility problem

Hi all,
Got a wierd monitor compatibility problem. G3 works fine on a sony 21" CRT.
Connected it to a Daytec 15" CRT which works fine with a windows 98 PC.
With the G3 I get the apple and the spinning up logo then the screen just goes blank.
Is this monitor PC only or something? It is an old monitor but I thought any monitor should work
if the vga connector fits?

So you are using this directly plugged into the stock Display card in a Blue & White G3 with NO adapter?
The Mac is probably still set for a higher resolution that the SONY can do, and has not noticed the display has changed.
Video pros says that Video can be plugged and unplugged all day long with no bad effects. If your old display is still around, try setting it to 640 by 480, save changes, and swap the other one in "live" at that resolution.
Other tricks:
Reset the PRAM. This will send you back to a default setting while booting up, but may change when the system becomes active.
Boot from a CD. This ignores the settings on your Hard drive, and boots to a very simple resolution like 640 by 480 to ensure that Most Macs can start up with it.

Monitor led problem

Hi support team,
we have recent take dell system with monitor. but now we have facing monitor screen problem,

Hi Santoshb
Please brief us about the issue, lets see if there is anything we can do .
Regards

Macbook Pro monitor hinge adjustment

Hello, does anyone know how to adjust the mbp monitor hinge by loosing up all the screws? video? picture? anything? been suffering by the small angle...close to 90 degree....jees....thank you for the help.

My 17" seems very flimsy on the hinge and it will a lot of the time just start closing the lid by itself. Is there somehow to tighten it, maybe adjust this myself or do I need to take it into get done?
Thanks in advance.

Macbook Pro WEAK monitor hinge AFTER apple repair! PLEASE help!

Hey everyone, I am using a 2010 MBP with a 15" hi res display. I had the computer for 3 months with no problems and then the display broke (wouldnt turn on) so apple replaced it. Once they replaced it, i noticed the display was not as strong. To help you all understand this better, let me give you some background information. I am a DJ and music producer and I play at various venues quite often. The problem I am having, is when my computer is on my laptop stand, and the bass hits from the venues sound system, the monitor will wobble down when placed on my laptop stand (http://www.safecomputingtips.com/blog/wp-content/uploads/2008/11/irizer-laptop-s tand.jpg). This NEVER happened before the display was replaced, nor does it happen on my 13" 2009 MBP. To get a sense of what im talking about, if you watch the end of this video (http://www.youtube.com/watch?v=hmN9p9z3KgA) it demonstrates how the screen will fall down with just gravity. While no one would ever use a computer like that, while it is on the laptop stand its position is very similar. When he holds the macbook body vertical, it causes the screen to fall down with gravity. Before my macbook was replaced, it NEVER did that. My 2009 MBP has had TONS of wear and tear and doesnt do that. I went into the apple store and tried it on EVERY macbook pro in the store, 13 15 and 17 inch models, NONE of them fell with gravity. This started happening when i got the screen replaced. I have gone into the apple store and have had the display replaced for weak hinges 2 or 3 times now, and every time i get it back it is no better. My computer was out of repair yesterday, I took it into apple tonight (20 mins ago) and I was told by a manager that this is within "normal" specs for a "normal" user. Which is true, this wouldnt bother anyone who doesnt use a laptop stand and plays in clubs; but i do. He told me there is nothing he can do, and that I would just have to deal with it (of course he said it much nicer). What i dont understand is that I paid 2,800 for a computer that worked PERFECTLY until the screen died, and once it was replaced due to APPLES fault, now i must deal with a problem caused originally by apple. When I DJ with my 2009 model, no problems. My thought process is that maybe because the original screen is not on the unit, the replacement may not be as sturdy because it wasnt built with the unit itself. For example, my 09 mbp has had no replairs and its fine. The models in the store i assume have had no display repairs, and theyre all fine. The manager agreed that my hinge was weaker than the rest of the stores' models, but even though it was weaker it was within "normal specs", and he wouldnt budge. I'm sure a new unit that has been built together will fix this problem, but he would not give me a new unit. Is there ANYTHING I can do to help this? I am going to a different apple store tomorrow and hope the manager is a bit more understanding in the fact that not all apple computers are put through "normal" use and therefore should not be judged with "normal" specs. When my computer was new it NEVER ever ever did this, and I feel like I bought applecare for that exact reason, so that for at least 3 year i have the computer I bought. Any any any help would be greatly appreciated, I am 19 going and paying my way through school and if i didnt have to pay for school I would just say screw it and I would buy another unit, but i cant. Thanks for reading this, i really appreciate it.

Unfortunately, spoke way to early. The fan issue is still a big problem. From the second the machine is turned on, the fan cranks up. Frankly, I think this is overheating the machine to some extent (running the fan at max speeds when it's not even warm). Additionally, the noise caused by this has only gotten worse, and now it is even making a "whistling sound." Looks like I'm going to be making the trek to the Genious Bar, but based on comments by others on this issue I am not optimistic about a fix.

Mini DVI to external monitor (VGA) problem/firmware update does nothing

Hi,
Four months ago I bought a new white 13-inch Macbook (2006 model I believe) along with a handy mini-DVI - VGA adapter. I used a Hanns-G HU196D external monitor which worked fine for a couple of months but then stopped, and had the same problem with a (much cheaper) 'LiteView' monitor. I find it bizarre how they work absolutely fine and then stop, with no damage to the adapter, cable or ports. I've since bought a new adapter and cables + trying out a different monitor and still the same problem...
I've installed a firmware update that describes the exact symptoms, but it's done nothing. Can anyone help me resolve my issue?? It's still under warranty so is it an unusual problem that'll need to be fixed by Apple?
Thanks

Are you using the mini DVI to DVI followed by a DVI to VGA adapter? That may not work if the mini DVI to DVI adapter does not pass analog video. If that is the case, you need the mini DVI to VGA adapter:
<http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/2.RSLID?mco= 17927D0B&nplm=M9320G%2FA>

Macbook and HP 2510i monitor display problem - help

Hello,
I am having display problem with my Macbook (Intel) and my 25'' HP 2510i monitor via DVI.. Until last monday I do not have any problems and my monitor was working flawless with my macbook.. Last monday I used the monitor with my HP Notebook to try Windows 8 on large screen. And after that try when I connect the monitor back to Macbook there is no display.. I tried the steps below
- I connected Macbook to my Phillips Plasma TV and it worked (no error with display card of Macbook or the wire or the adaptor)
- I connected the monitor back to HP laptop it worked.. (so no error with the monitor)
- I unplugged monitor to cut electricity and tried.. nope not working
- I did several tricks with macbook no effect
- I reinstalled Mountain Lion .. no effect
- I formatted Macbook, reinstalled Snow Leopard.. Not working.. I installed back Mountain Lion .. not working
Whatever I tried the HP2510i is not displaying, mirroring my Macbook..
Any help will be appreciated
Thanks

My graphic card details;
NVIDIA GeForce 9400M:
Chipset Model:          NVIDIA GeForce 9400M
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0863
Revision ID:          0x00b1
ROM Revision:          3462

G5 DVI to VGA Dell Monitor Connection problems, need help!!!!!!!!!!!!!!!!!!

hello,
I'm running two dell monitors both of which were connected via DVI to my g5 quad dual dvi. My tv broke and I'm using one of my monitors to connect the cable boxes HDMI input to the dells DVI input, it works great.
My problem is that i still want to run two monitors from my mac and still be able to switch channel sources from the Dells source button allowing me to switch from TV to Mac. Since I took up the dvi port on one of my monitors to connect to the cable box via HDMI, I have a free DVI cable. I purchased a tiny converter that allowed to change one end of the free DVI cable to VGA. I used this method to connect the cable to my g5's dvi port and the configured end to the VGA port on the monitor with no luck.
The Dell monitor does not pick up any signal and just goes to sleep as if my computer does not exist. The TV works fine and I'm able to switch sources. Please note that I'm not using the DVI-VGA adaptor that came with my g5 and don't know if this would make a difference. If it does, how do i set this up because this adaptor is like 5 inches long.
Does the adaptors DVI end need to be connected to the back of the g5 or does the VGA end need to be connected to the monitor or does it not matter. I need a longer dvi-vga cable as well, do they make them. This all depends if the problem actually is that that I'm not using the DVI-VGA cable that came with my mac to connect to the monitor in the first place.
Can anyone help me out here. I'm using the Dell 2208WFP Ultra Sharp.

Bad adapter?
The G5 ports are DVI-I. Any good DVI-I to VGA adapter should be fine.

After OSX.4.11 update external monitor unresponsive+problems w/sleep etc

I've read some of the recent display problems. Here is my problem and what I've tried, my problem just started 6 hrs ago. I updated to OSX.4.11 a few days ago - eveything worked fine, yesterday I reinstalled epson printer driver as it was crashing and also yesterday I worked for several hours in iMovie 08. Nothing else unusual. This is STRANGE!
Today went to wake my MBP, 2.4 GHZ, 4GB ram, Cinema display 20", wireless keyboard/mouse up from sleep to check mail. Cinema display flickered and then changed to dark blue solid - and unresponsive. Couldn't get external display to function. Never had any problems with it. Tried to restart everything, unplug all cords, etc. Everything started up I got the log in password screen on my external cinema display - typed in my password - then saw my desktop photo for a second and the cinema display flickered to dark blue again and wouldn't change. It was unable to mount the desktop.
I went to my MPB while still connected got the screen on the MBP and saw the desktop but there were sort of black lines through the names of my folder files on my desktop. I then disconnected the cinema display, restarted just the MBP and the screen (of the MBP) that mounted was perfectly normal - no black lines through file folder names.
Then I tried various things. I assumed my cinema display was broken (almost 3 years old). But then I hooked my MBP up to an old 20" cinema display (they kind with 4:5 ratio and plastic all around), I think it uses some kind of converter to the DVI port anyway my MPB worked with that old display fine, desktop fine, but it would not stay asleep - no matter what I tried. I've never had that problem ever before.
Then I took the "newer" 3 year old cinema display (aluminum one) that I use all the time I I suspected was busted and hooked it up to my old Powerbook G4. And it mounted the desktop and worked fine!! The G4 just got updated to 10.4.11. Interesting thing is though when I closed the lid which usually made the G4 PB sleep it shut it down instead of making it sleep. Very odd.
Then I ran down to Apple store and bought new version of Disk Warrior and ran it on my MBP. I've never had anything Disk Warrior couldn't fix. It rebuilt my directory. I then hooked the MBP back up to the cinema display (aluminum) and the same thing happened I got my log in screen after startup, logged in password saw the photo desktop for a second then the cinema display went back to a dark blue screen that was unresponsive. I then ran Disk Warrior again with the cinema display attached to see what would happen. Disk Warrior mounted and I saw the whole process on the cinema display. The cinema display will mount disk warrior but it will not mount the MBP desktop as of 6 hours ago.
I then read these recent posts and tried a "safe" boot. I got my MBP desktop on the cinema display (aluminum) but as soon as I clicked on system prefs the cinema display went to dark blue unresponsive screen.
But the same cinema display (aluminum) works fine with the Powerbook G4 except for some issue with sleep
And the MBP works with an old plastic cinema display except again, it won't stay asleep.
But the MBP and the aluminum cinema display that I've been using together for my photo/video editing for 4 months straight now and I've never had any problems with - they won't work together as of 6 hours ago. That is when I get the dark blue unresponsive screen on the cinema display (aluminum).
Upshot is:
1) Something is up with sleep mode and the OS X.4.11 update on 2 different machines (G4 PB and MBP)
2) Something is affecting the way both the MBP and the Powerbook react with both my cinema displays. The MBP and the 20" aluminum Cinema display are the ones I need to work with and the ones that as of 6 hours ago just lock up in cinema display dark blue screen (almost black but not quite).
Is this a problem with sleep, startup or DVI output and OS X.4.11?
What can I do about it? I need to use my 20" aluminum cinema display it is clearly the better one of my 2 cinema displays. And even if I switch to my 20" older plastic apple cinema display the computer won't stay asleep any longer?
Please, Please I need some help.
Also since this is happening on 2 separate machines and 2 separate monitors there is something odd going on.
Apple tech people, is there a major problem with .11 and sleep and external displays?
Sincere Thanks, Carol
PS Note, I tried all this numerous times with both bluetooth and regular wired keyboards/mice along with MBP and PB keypads.
Message was edited by: oceangrant
Message was edited by: oceangrant

Sorry please forgive me, I'm so exhausted I posted this in MacBook instead of MacBook Pro, I'll try to move it but if I can't I'll try to copy it and post in MacBook Pro, regardless I think there is a problem with the .11 update.
Thanks, C

Dual Monitor Startup Problem on MacPro - Solved

I have a model 53135LL/A = mid 2010 MacPro with 8 cores, DUAL monitor cards and monitors, 24GB memory, running Lion 10.7.3. It is important to note that I am also using the Apple bluetooth Magic Mouse and the smaller, bluetooth keyboard (no numeric keypad). This unit was supplied with Lion in December 2011 and has had a startup problem from the beginning as follows:
1 - when starting from a cold start the dual monitor positions are reversed from the correct position
2 - additionally the USB and firewire connected devices (e.g. Wacom tablet, 2 card readers) do not function properly.
The workaround for me has been to start the system, wait for the logon screen, then click restart. Upon restart everything comes up and functions correctly.
Specifics on my setup and starting problems:
1 - My main monitor (Monitor #2) is a large gamut monitor that is located to the right. This monitor is connected to card slot 1 as that is the faster card slot (pcx16). The second monitor (Monitor #1) is an ordinary unit and connected to card slot 2 (pcx4). The monitors are set up as an extended desktop.
2. The Wacom tablet (Intuous 3 wide) is connected to USB port on rear of machine. CF card reader by Delkin is connected to Firewire on rear of machine, and an SD card reader is connected to USB on the rear of the machine.
3. My dock is positioned on the left side of the left monitor. The menu bar is along the top of the left monitor, and all desktop icons are on the left monitor. The right monitor has no items on it.
On a typical cold start, as mentioned above, the apple logo appears on the right and then the logon screen appears on the right.
If I proceed to logon at that point, all the desktop items move to the right monitor and the computer thinks the positions are reversed. In other words, it behaves as though the right monitor (#2) is on the left of the desktop and left monitor (#1) is on the right.
Additionally, the Wacom tablet using either pen or mouse does not map over the full desktop range. If I use either card reader and then eject the card, no further card insertions will be recognized.
To fix this, I simply restart the machine thru the apple menu and everything comes up correctly.
I had discovered, that instead of completing the logon on a bad cold start, I could simply restart from the logon screen and all would work correctly.
On occasion, the logon screen would come up on the left monitor (as it should do) and in that case, if I log on all works correctly.
I have worked with Apple support on the phone, clearing setup ram etc. Have had the unit in to Apple store for hardware check, all OK. Next suggestion was reload OS and start over - no thanks.
SO - Here is the latest.
If I turn off my keyboard and mouse before starting the machine, then wait for the logon screen to appear - It starts correctly, with the logon screen on the left. I can then turn on my keyboard and mouse and all works as it should.
Bottom line - there appears to be a startup issue with Bluetooth devices from a cold start. Note that once the machine has been used for a bit, I can turn it off for short periods of time (e.g. 30 minutes) and it will start correctly even with the mouse and keyboard turned on.

mkaito wrote:
That's how dwm behaves. I believe dwm's multihead support is rather lackluster out of the box. You might want to check out some of the patches they have, and ask around in the dwm hackers thread.
I currently have dwm simply draw status on all monitors, but I'm investigating separate status bars per monitor. We'll see where that takes me. Dwm is a tinker's WM!
i found the patch , thanks!

Dual monitor setup problem

Having a problem setting up dual montors.
http://www.microsoft.com/windowsxp/using/setup/learnmore/multimonitor.mspx Followed everything at this link and everything went fine except a few things.
1st. The comp, was responding really slow and/or not responding at all.
2nd. The comp, takes a big performance hit per 1st problem.
3rd, How can i get explorer to work on the other monitor (secondary)like it shows on the primary one.
Also one monitor is a 19" Lcd and the secondary monitor is a 17" crt, i'm plugging the crt into the dvi-i port with the dvi-i/vga adapter, i also tried dragging items from one screen to the secondary but didnt work Any ideas on what to do to make this setup perform better, Thank you, DOK

OK here goes for everyone that has said to use drive cleaner my hat is off to all, I'm an idiot for not listening or paying attention, so if your reading this and saying noob, ding dong, dummy or what ever i deserve it, many apologise. Well i have fixed above problem and downloaded a fresh copy of 81.98 and used drive cleaner as per instructed and guess what to my surprise, the system works great, per Tiresmokes referall i have posted new results in the section that was suggested, Thanks DOK

MONITOR SCREEN PROBLEMS - has anyone else had this ? HELP ..

Friends,
I am going nuts ( no don't answer that one ! ).
Recently ( possibly after the 10.5.2 graphics update - I can't exactly recall ) my LG flat screen monitor has started to look like a grainy 60's acid art house experiment !!
It is subtle but most disconcerting as I use my beloved G5 every day with Logic P8.
I have tried changing settings - calibration the lot... but still it looks strangely weird - like a TV that is not quite tuned in.
Gradients and shaded areas have weird lines instead of fine tones and artifacts appear around type and lines where was once beautiful and clear graphics.
When I first bought the LG 204WT 20" monitor 5 months ago it was fine !.
I have been using the recommended DVI output and tried different cables and the alternative input - the effect is still there but not quite as bad when using connector to RGB input.
The shaded areas in finder and Logic are almost transparent and grainy with a light blue / pink halo like effect around windows and graphic boxes.
I *don't know how to explain it really but I do hope someone out there may have some answers or at least have an inkling of what I'm trying to describe..*
As if I couldn't make matters worse I did an archive and install to roll back to 10.5.1 early hours of this morning - this didn;'t cure the problem and I lost the use of some music plug -ins and authorizations in the bargain.. Maybe it is time to call it a day and take a long break.
Really I should get a pen and paper and sit with my guitar an a darkened room for a few days.
I called the Mac shop where it was purchased then LG but with no help, advice or offers to replace it.
I guess the monitor basically works but this strange behaviour is arguably quite subtle and may not be considered 'serious' by most people !
*In the meantime if any of you lovely people could take my situation seriously and offer any practical advise I would be most appreciative.*
Many thanks - not quite lost it yet - Paul

Hi Pancenter,
Many thanks for taking time to message.
The resoloution is set as it should be and millions of colours is selected etc.
The screen has had several contrast / brightness adjustments and a factory reset with no improvement.
Also someone suggested the screen zoom might be on but this is all set as normal.
I have an imac which works fine and the difference is quite noticable - on the G5 w/ LG screen there are light blue and pink 'halo's ' around gray areas, graphics have strange patchy dots like a screen print and as I am looking and typing into this forum the gradient shaded area that says 'Apple Discussions' has very poor quality shading with horizontal blue lines !
I've also tested the cables and made sure there are no interferences - this is really weird...
I will try another monitor when I get chance - thanks again.
Paul

Recent Windows 7 update causing monitor sleep problems/Windows loop in some HP desktops?

After perusing this forum, I wonder if there was a recent Windows 7 update that has been causing problems for some HP desktops and displays. My office has a 3500 Microtower desktop running Windows 7 Pro. While Windows 7 Pro is running and in use (as in, not prompted by any user-set power management option), the dual HP displays (via DVI split to VGA) will enter sleep mode ("No Signal", I believe) seemingly randomly/chaotically and without warning. No amount of mouse-waving and keyboard-smashing will wake the displays. The displays will not receive a signal after being turned off then on. Then, not immediately but after some undetermined time, the desktop hard drive light will begin to blink at a consistent 1-second interval (approximate), as though it is stuck in a loop.
My guess, based on both our office's experience and the posts I've read with the same problem (see below for links), is that this update would have become available either November 16 or 17, November 15 at the earliest.
Thank you for your attention to this conundrum!
Aaron
One more piece, not sure if relevant: a user connected remotely in order to monitor the desktop, but detected no problems with the machine. Unfortunately, I was not able to remain with the desktop to see if the displays had shut off at any point during his monitoring.
Links to other forum posts:
http://h30434.www3.hp.com/t5/Desktop-Audio-Video-Monitors/HP-Omni-220-1050xt-Monitor-goes-blank-at-r...
http://h30434.www3.hp.com/t5/Desktop-Audio-Video-Monitors/No-signal-message-on-HP-2010i-using-HPs500...
http://h30434.www3.hp.com/t5/Desktop-Audio-Video-Monitors/HP-S2331-problem-with-coming-on-and-stayin...
http://h30434.www3.hp.com/t5/Desktop-Audio-Video-Monitors/HP-Pavilion-HPE-h8-1100z-CTO-Desktop-PC-pc...
http://h30434.www3.hp.com/t5/Desktop-Audio-Video-Monitors/HP-w2007-monitor-flashes-on-then-off-and-g...

Hi,
If you think that the issue is related to a recent Windows 7 update then try going back to a known good restore point before the issue occured.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Monitor hinge problem?

Similar Messages

Maybe you are looking for