Monitor Hook-up

I am a children's pastor and recently got a new macbook pro. I would like to hook it up to two tv monitors to play my music on. I don't know much about sound equipment, but need to know how to run my videos from the laptop to the two tvs. I have gotten some other opinions, from non Mac users, so i wanted a more educated one! Thanks for your time and input.
God Bless
Rachel King

Hi Rachel
If the TV supports HDMI then you can use this type of cable http://store.apple.com/us/product/TL952LL/A?fnode=MTY1NDA3Ng&mco=Mjc2Mjg
You will need to use a headphone pin to 2xRCA for sound, (this can also be plugged into the tv). The DVI-HDMI cable only supports video transfer.
Hope this helps
J.C

Similar Messages

  • Dual Monitor Hook-up, DVI/VGA/HDMI?

    I think it's time to retire my aging samsung 22" and buy a few 23" LED's to replace it.
    My graphics card only has DVI out (x2), and the 3 monitors I'm looking at do not have dual DVI (either dual HDMI and DVI, or DVI/VGA/HDMI), so I would need adapters from DVI to HDMI/VGA. I'm guessing that's all handled at the adapter/hardware level, so linux should have no problem finding them, but if I'm hooking 1 up natively to DVI, and the other through an adapter (or both through adapters), will I notice any quality difference between the 2 monitors?

    Cyrusm wrote:
    Personally I use my HDMI monitor as my main monitor and have the secondary monitor attatched to VGA. I can't really tell the difference in performance between the two, however I never work with anything terribly graphics intensive.
    and it hurts to hear that my Samsung 22" is also  'aging'  of course so is my 17" secondary I guess maybe that'll be my next investment...
    Sorry about the aging comment
    But this is the answer I was looking for! I don't want to have 1 monitor hooked up via HDMI and the other VGA and be able to see a noticeable difference between the 2. I don't do anything graphics intensive either.
    Thanks for all the responses!

  • My iMac (2007) keeps shutting off when in Full Screen mode (DVD, iTunes Visualizer, etc.) This only happens when I have an external monitor hooked up HDMI.

    My iMac (2007) keeps shutting off when in Full Screen mode (DVD, iTunes Visualizer, etc.) This only happens when I have an external monitor hooked up HDMI. Help?

    Try using another connection such as VGA or DVI to see if the problem repeats itself.

  • Hook iBookG4 so TV is monitor & hook up separate keyboard

    I need to know a cheap way to hook iBookG4 so TV is monitor & hook up a keyboard so iBook is a distance away from me

    ...you'll need the Apple Mini-DVI to Video Adapter.
    I think that was a slip of the tongue since the iBook does not have a mini-DVI output.
    The corresponding mini-VGA adapter, which will work, is the Apple Video Adapter (M9109G/A).

  • External monitor hooked to laptop keeps going "dark"

    The screen on my laptop cracked and so I have hooked it up to an external monitor HP 2009m via VGA.  Laptop is HP Pavillion dv6 with Win7 home premium with all current updates.  After I have been working for about 30 minutes, the monitor keeps going off and I have to hit the power button which usually brings it back, but sometimes I also have to use the source button to cycle back to an active monitor.  The "power lockout" shows up occasionally and sometimes it just refuses to stay on for more than 30 seconds.  I have used the factory reset, have held the power button for 15-30 seconds and unplugged it but it still keeps happening.  I have disabled OSD and sleep and everything else I can think of.  Starting to suspect it is something coming from the laptop, have never seen anything like this and scoured forums for simliar problems/solutions (hence the holding power and factor reset items I have already tried).  I am starting to suspect it might be Netflix, although this seems odd, but it definitely happens more often if I am listening to Netflix in the background. 
    Anyway, I will reboot and it will be ok for awhile.  Actually, until I start watching netflix again.  Any other ideas?  Driving me insane.  Can I just get the monitor on my laptop fixed replaced?  Thanks in advance for any ideas. 

    you can check in power option and monitor options too
    >> start menu >> control panel >> Power options
    you will see the list on the left column and you will find monitor options
    Please provide Kudos to whom has provided answers or
    good points or advice..
    Aslo if the questions or issues solved please check it
    "Accepted"
    Thanks and you are welcome _____ Rick

  • Monitor hook up for Mimi

    I recently purchased a Mac Mini Core 2 Duo 2.4 GHZ (mid 2010) MC270LL/A. I have an LG Flatron W2040 monitor. Can anyone tell me
    what sort of connector I need to get to hook this monitor to the mini?
    Thanks,
    Jackie

    IIIaass is spot on.
    I have dual LG Flatron S22B310 monitors connected to my 2010 Mac Mini.
    One is connected using the Apple supplied HDMI to DVI adapter and a DVI cable.
    The second is connected using a Kanex Mini DisplayPort to DVI adapter and a DVI cable.
    Addtitionally I tried several different Apple branded MiniDisplay Port to DVI adapters and they worked fine using a single monitor, but would not work in the dual montor configuration.

  • Sony Monitor hooked to a Thunderbolt display

    Has anyone hooked a Sony SDM-P234 monitor to a Thunderbolt display?

    I didn't suggest using a VGA adapter because I never suggest using an analog interface when a digital interface is available.
    But given that you have the vga adapter did you see an Arrangement tab in the Displays system preferences?  If not try clicking Detect Displays and make sure the TB plug is pushed firmly in so that essentially all the metal part disappears inside the socket. 
    If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the other screen's Displays preferences on to your main screen.  Set the proper resolution.  Set the refresh rate if that preference is shown.  Hopefully you should see a picture at this point.

  • G5 Imac monitor hook up !!

    Hey Everyone,
    Quick question , i am thinking about selling my Mac Mini and buying a Imac G5 , however ... I still use my Dell Dimension system. I was wondering if it is still possible to run my Dell Dimension, with the Imac G5 as my monitor ?
    I know the isight and the remote probably won't work, but has anyone done this before ?

    For getting file sharing set up between the computers, try this:
    http://www.ifelix.co.uk/tech/3001.html
    Here's the Remote Desktop Download. The help files should give you the rest of what you need:
    http://www.microsoft.com/mac/otherproducts/otherproducts.aspx?pid=remotedesktopc lient

  • Dual Monitor Hook-up

    I have a Dual 2.0 Powermac G5 and I was wondering if it is possible to hook-up two of the old style plastic Apple LCD displays?
    I have one 17" Apple LCD hooked-up right now with a DVI to ADC connector. How do I hook-up a second?

    I believe it has a NVIDIA Ge Force 6800 or a ATI Radeon 9600. On the back of the G5 is two DVI ports. One of them has the DVI to ADC adapter plugged into it, which has my old 17" Apple LCD display hooked-up to it. The other DVI port is empty. Do I have to buy another DVI to ADC adapter to hook-up another old Apple LCD?

  • Monitor hooked up to G3 powerbook is extension not mirrored

    My screen went on my G3 powerbook black model. I hooked up a monitior but it is acting as an extension. There is no key on my key pad to change it to mirror plus my apple key does not work.
    Anyone know how to switch this?
    Thanks,

    Welcome to the Apple Discussions!
    You've posted your topic in the "MacBook" forum. I think you'll find more help in the PowerBook G3 forum.
    -Doug

  • Tripple monitor hook up? WACOM!

    So i have dual Dell displays and a Wacom graphics tablet. My goal was to be able to mirror one of the displays *or idealy be able to switch between the two* on my Cintiq. I have three ports and when all connected, the set up works fine. I can either have it as a three monitor spread, or mirror to all of them.
    Is there a way this can be done?
    Thanks,
    CC

    Click the ? near the bottom right of the "Arrangement" tab of "Displays" system preference for instructions on mirroring only two of the three displays. For best performance, the mirrored displays should use the same graphics card.

  • Ibook monitor hook-up

    Many people here seem to need help using an external screen with their ibook, I however need help the other way around!
    Is it possible to use my ibook G4's 1024x768 screen as a monitor for a computer that's currently monitor-less?

    Brew-no, Welcome to the discussion area!
    No there is no video input on the iBook.

  • How do you hook up a TV monitor to a second GFX card?

    hi - after i learned that the Nv7800GT GFX card I ordered with my G5 dual core doesn't output to S-Video, i ordered and installed a 6600 card (which allegedly does). However now that it is installed, i can't seem to get it to recognize the TV monitor i've hooked up using the apple DVI to S-Video adapter. the system profiler just tells me "no display connected" on both of its ports.
    Can someone please help me to set this up correctly? I want to use the 6600 to drive an external monitor or beamer.
    thx for any help in advance!
    fj

    Did you hit "Detect Displays" ?
    yes. i notice that in the sys prefs only my cinema display (the one connected to the 7800GT) is shown. in my experience of using "extended desktop" mode, i would see a second display listed, along with several resolution options.
    but in this case, i am not using a single gfx card with a second monitor hooked up. so why do i not "see" the second card in the control panel? (it shows up in the system profiler)

  • Need suggestion for hooking up 3 monitors to my desktop PC

    Hello everyone,
    I am wanting to know the best and cheapest way to hook up 3 monitors to my PC. I have an HP Pavilion HPE h8-1234 with a 6 core AMD FX-6120 processor at 3.5ghz(up to 4.1ghz in turbo) with 10gb of DDR3-1600 RAM. My graphics card is a Radeon HD 7450 with 1 HDMI port and 1 DVI port in a PCI Express x 16 slot. I have 3 more PCI Express x1 (Gen 2.0) expansion slots available. I currently have 2 monitors hooked up to my graphics card and want to add another monitor. Any suggestions would be greatly appreciated.
    Lotventures

    Lotventures,
    The answer really depends on what you intend to use the computer and monitors for, and how much you are willing spend. Please provide us with some background and/or the primary intend use of the system. As an example of your options... the use of a USB-to-video adapter such as the eVGA UV Plus+ 39 would be fine for docs, daytrading, speadsheets, internet browsing and some video. However... gaming, heavy video, and the like will require a new graphics card and maybe a new power supply.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • H8-1280t: Hook up the desktop with 2 monitors

    Hi,
    I have the h8-1280t, with HDMI and DVI output; and VGA port. 
    Currently, I have my monitor hooked up thru the VGA port. 
    I am trying to hook up my desktop to my AV receiver (thru HDMI), so that I can stream movies thru the AV reciever to my TV. 
    My question is... Is it possible to keep the VGA (or DVI) connection to my monitor, and also have video output thru HDMI cable (to my AV receiver) ? 
    Thanks

    dravp wrote:
    ... My question is... Is it possible to keep the VGA (or DVI) connection to my monitor, and also have video output thru HDMI cable (to my AV receiver) ? 
    Hi,
    HDCP rules may prevent you connect your computer to a reveiver. It's a CTO machine therefore I don't know its specs but normally you can connect two monitors at the same time (or one monitor and one TV, not go thru a receiver).
    For HDCP, please read:
         https://www.digitalconnection.com/FAQ/HDTV_12.asp
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • IDOC not there in WE02

    Hi Gurus, I am doing a FILE TO IDOC scenario for taking Material Master data from the MDM system and posting the IDOC into the R/3 system.. The entry is there in MONI with the chequred flag but there is no IDOC in we02 of the R/3 system. Also , i pas

  • Problem with some mailboxes

    Hello. Version: iPlanet Messaging Server 5.2 HotFix 2.10 (built Dec 26 2005) libimta.so 5.2 HotFix 2.10 (built 12:00:16, Dec 26 2005) SunOS unimail 5.9 Generic_122300-02 sun4u sparc SUNW,Ultra-80 Today we have a rare situation: I can send messages to

  • Bluez / Bluez4

    Hello Guys, today I tried to install bluez, however I fail at the gnome-bluetooth applet. It's not possible to remove it, since gnome-bluetooth needs it and gnome-shell needs gnome-bluetooth. But: shouldn't gnome now depend on bluez (5) instead of bl

  • Strange file in trash that won't go away?

    I have a strange file that appeared in my Trash the other day. I tried to empty the trash multiple times, but it won't go away. Secure empty trash doesn't help, as it just gets stuck. Double-clicking on the file, getting info on the file, or dragging

  • ABAP Webdynpro Linktoaction in table

    Hi, In my webdynro view i have a table with some fields as linktoaction. In the context for table following attributes are set: Initialize Lead Selection = 'X' Singleton = 'X' How can I get the row where the linktoaction is clicked on in the correspo