Monitor is displaying flickering pink lines

Hi,
My monitor suddenly started flicking pick and green lines all across the monitor. I believe it's a problem with the monitor sincr when it's connected to a tv it's normal. Is there something that can be done to fix it or is it a goner? I would upload a picture but I don't know how to on here.
Thank you.

Hello lin09,
There could be a few reasons why its flickering colors and it does not necessarily mean the monitor is bad.
You did make sure the cable is tightly attatched, correct?
Can you test the monitor on another computer to rule that out? That would help narrow down the troubleshooting process.
Test with the same cable. If it still flickers, test with a different cable. If it still does not work, the monitor is bad.
If it works fine on another computer with the same cable, The problem lies in your computer.
Even though the TV works on one port, the other port on the video card the monitor is hooked to could be bad.
Using another monitor to test the same video card port would help.
Driver corruption is slightly possible and you could try uninstalling and reinstalling / updating.
That should give you a good place to start.

Similar Messages

  • G4 Powerbook Display: weird pink line fault

    Can anyone explain what to do about this problem: the display has pink lines all over the place?
    !http://i364.photobucket.com/albums/oo82/dogliege/Picture1-4.png!

    Hi Musicspirit,
    this is a long shot, but bear with me: I'm typing this on a TiBook G4 550 on which the videoconnector on the motherboard has to be slightly askew in order to deliver any picture at all. Otherwise its LCD is completely blank. Having secured this tiny plug with a piece of gaffer tape, the connection has not gone astray for 1.5 years and running...
    So I'm saying it might be worth your wile to look up your PB model on ifixit.com, disassemble it and experiment a little with the lcd cable/ connector, until all looks well- which may prove difficult with an Alu model.
    On the other hand, especially if you open and close the computer's 'clamshell' very frequently, we may be talking plain cable breach here, since the videocable passes alongside a hinge and is severely bent on every opening/closing of the shell.
    Assuming of course Applecare has expired on your machine, otherwise: have it serviced under warranty.
    Good luck! And good music!

  • Macbook Pro's screen flickering pink lines?

    My mid-2009 Macbook Pro's screen has recently started flickering pink lines in fields that are otherwise normally white (browser windows, text fields, etc). It happened spontaenously one day last week. The machine was never dropped or anything. At first, I thought smc reset and pram reset fixed it, but the problem has returned.
    One small quirk: pressing down on the machine roughly in between where the two fans are temporarily fixes the issue, until I release it. Seating it on top of an object that applies pressure there also allows the screen to function normally.

    Take it to an Apple store genius bar and have the techs test it...could be something as simple as a loose connector, or something more serious like a problem with the graphics module or the logic board.

  • Macbook pro 15" retina, display flickers, weird lines follow cursor

    Just got this MacBook Pro on Christmas... Installed Microsoft Office Suite, Adobe Photoshop, and Adobe Illustrator today. Later in the day the display became very discolored; vertical and horizontal "shaded" lines follow the cursor, areas above open windows are discolored (lighter), and the screen flickers when typing. I did the software update and have restarted the system, but it is still having issues. Does anyone know of a fix, short of getting into an Apple Store or scheduling a call with Apple?
    Thanks!!
    Maggi and Joe

    Nope - it sounds as if you've GPU issues and the discrete GPU is soldered onto the logic board. take your new machine into your local Apple Store for a replacement. Don't wait too long!
    Clinton

  • Grub2 booting with dual monitors no display (flickering)

    Just finished my first installation of Arch and run a Dell Latitude E6410 at work with a dock and a large external monitor hanging off the VGA port.  When the machine boots up after initial Dell screen, I get mostly a black screen with some lines of colour on the display, eventually after the usual grub timeout I see that it starts booting.  I've messed with the /etc/default/grub file and changed the GRUB_GFXMODE to something in the range of hwinfo --framebuffer with no luck (Im redoing the grub-mkconfig command after changes).
    I've recently undocked the laptop and booted in a single screen and grub works perfectly, so there is obviously some issue with what display it should use or that its trying to span it across the whole range.
    Can anyone share some advice on where I need to go from here?
    Thanks

    I've been doing some extra work to try and resolve this and I'm coming up with not many more ideas.  If anyone can point me in the right direction log file of config file, that would be great too!

  • My screen displayed flickering of various colors in line.

    I have a macbook air 11" almost a year with it now...and it has given me jst a
    couple of problems. First was my screen displaying flickering lines of various colors so I didn't
    know what to do..so I jst keep pressing certain buttons to stop it, I had to use the power button..and it
    didn't work..until a couple of seconds later it shut down. Next was my sound system. There was this
    weird sound of some kind of banging sound..like hitting something. I had to shut down my laptop.
    I'm not liking this anymore. I don't know if I should return the product before the year is complete.

    Return it as meaning getting a service call, yes.
    Contact Apple for appt. for in shop diagnostic and likely repair.
    vertical or horizontal lines?  Do the lines move when you move the monitor?
    either damaged LCD feed lines or fault of same at connection with logic board or possible defect at logic with GPU

  • Weird problems with motion 3 displaying pink lines and other garbage

    I am using Motion3 to create HD graphics. With each of my projects I start with motion everything is fine until I build about 4 different layers or add any type of motion or filters.
    It seems as my projects get more complex my viewer window or canvas starts displaying weird things. Pink lines, white and black garbage, nasty thin lines, various other junk. Sometimes the image is completely gone.
    I have had some luck retrieving it by turning off motion blur or turning of field rendering and turning it back on. This fix only works sometimes.
    Other times my video displays fine until I render out and then the garbage happens.
    Anyone come across this?
    I am currently using a an ati radeon 9600 video card and it's running two monitors on dvi and one vga. I have ordered an nvidia 7800 gs in hopes it will fix this problem and ease the pain of render times.
    I have been using motion 2 for a while and never had this issue. I was hoping to milk this system for a while before having to upgrade.
    Any thoughts or suggestions?

    I think you are pushing that card to it's limit with HD and splitting the VRAM across two monitors. I would bet a new card will clear things up.

  • Flickering intermittent lines on my display (Macbook Pro 15in Unibody mid-2009)

    HI all,
    My MacBook Pro 15" Unibody Mid 2009 is suddenly displaying strange artifacts across the display - flickering lines of color (seems like red is most common). When this happens if i flex the machine body i can usually get it to disappear. Running an external display works totally fine, even while lines are appearing on the built in display. Another strange symptom - while this is happening sometimes, when i am dragging a file in Finder, it refuses to release from 'dragging' - ie... the OS believes i still have the mouse button pressed down (whether using a trackpad or external mouse) and continues to do so until a restart or sometimes a force quit.
    I suspect the display cable (which i have reseated to the connector), though the most effective quick fix while this is happening is pressure on the bottom, middle of the case (which of course worries me).
    I should add, tho it seems strange and might be circumstantial - this all started after installing mountain lion (from snow leopard) and the artifacts dont seem to happen when i am running in boot camp.
    Hoping this can be resolved by some minimal DIY fix...
    Thanks in advance for any help!

    Hi,
    Not really a suggestion as such, but I have just installed a WD Scorpio Blue 500gb HDD myself. Unfortunately I've been having some issues with it and started a topic on this site to find an answer:
    http://discussions.apple.com/thread.jspa?threadID=2518783&tstart=0
    I thought you might be interested as it could affect your decision.
    Rh

  • The display on my computer has turned into pink lines and i don't know what i should do

    The display on my computer has turned into pink lines and i don't know what i should do

    what model and version of osx. You can also try a apple hardware diagnostic, restart holding option + D.

  • My blackberry Z30 is displaying a vertical pink line on the screen what should I do?

    My blackberry Z30 is displaying a vertical pink line frn top to bottom of screen, what should I do to clear it, secondly the head phone need to be supported by hand before it can funtion.

    That sounds like a display hardware problem. You should get the device replaced under warranty through your carrier.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Vertical Pink Line On My MacBook Pro 15" w/ Retina Display

    I am noticing a pink line running down my display on the left side. I have tried the resets and display settings but nothing is working... Is there any suggestions before I turn it in to get fixed?

    I also have this problem (although the line is bright green) and another thin yellow line in the middle of the screen that comes and goes. Unfortunately for me however my MacBook is a few months out of warranty and as it is not yet 2 years old I'm a little grumpy about the idea of having to pay high costs to have it fixed (and especially when this seems to be a common issue). I have tried to reset the PRAM and to fiddle with display resolution but nothing seems to work. I have a MacBook Pro with Retina display, OS X  (10.9.4) purchased in December 2012. If it is faulty hardware, does anyone know if Apple will still charge to fix this?

  • Screen gone crazy (pink lines+ flickering)

    I was playing dota2 and suddenly screen went bad for no reason at all, what I saw is massive horizontal pink lines with some green highlights too and everything looks like its moving up and down in super speed. Its like watching a 3d movie without 3d glasses but worse. This problem is there on boot screen also not just on windows login.
    I am clueless cause both gpu's seem to be detected as working in device manager and i never rough used my laptop or even removed those plastic cover it came with.
    I need to get this fixed fast, what do I do? I doubt long hours of keeping the laptop running can cause this! Can it? All i do is email and small ms office.
    List of things i tried:
    Restarted, updated AMD drivers chipset since my card is AMD, disabled Intel and AMD gpu one by one and restarted.

    @dizzy123 ,
    Hello and thank you for posting on the HP support forums. What generally causes this is the cable that connects the screen to the motherboard.  It happens over time due to opening and closing and causing the cord to flex.
    So that I am better to help you with your issue could you please post back with your systems key information.
    Use this link to find your Full Model and Product Number
    Please post back soon.
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • External Display Flickers (Intel on board)

    Hi,
    I have recently made a fresh installation of Arch Linux and trying to setup it for my work environment. I made a basic installation of xfce4 with slim login manager. I wanted to hook my laptop with an external display. I used xrandr to extend my laptop display with the external display. Everything worked fine but my external display flickers insanely bad. I cannot stare at it for > 30s. I dual boot on windows, so I tested the same setup with windows and it worked just fine, out of the box. I even used one of my friend's laptop who's running ubuntu and has the same h/w. It worked out of the box. I have spent more than 8 hours trying to find out where the issue would be and miserably failed. Below are certain logs and output that might help traingulate my issue.
    Its a Dell Inspiron N4030, with Intel onboard graphics. I have the xf86-video-intel driver installed and the display works perfectly fine with laptops default display.
    Output of xrandr -q
    [joker@lucifer ~]$ xrandr -q
    Screen 0: minimum 320 x 200, current 2732 x 768, maximum 8192 x 8192
    LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
    1366x768 60.0*+
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    VGA1 connected 1366x768+1366+0 (normal left inverted right x axis y axis) 344mm x 194mm
    1366x768 60.0*+
    1024x768 75.1 72.0 70.1 60.0
    832x624 74.6
    800x600 72.2 75.0 60.3 56.2
    640x480 72.8 75.0 66.7 60.0
    720x400 70.1
    /var/log/Xorg.0.log
    [ 42.854]
    X.Org X Server 1.11.2
    Release Date: 2011-11-04
    [ 42.854] X Protocol Version 11, Revision 0
    [ 42.854] Build Operating System: Linux 3.1.0-3-ARCH x86_64
    [ 42.854] Current Operating System: Linux lucifer 3.1.0-4-ARCH #1 SMP PREEMPT Mon Nov 7 22:47:18 CET 2011 x86_64
    [ 42.854] Kernel command line: root=/dev/sda5 ro
    [ 42.854] Build Date: 07 November 2011 07:53:00AM
    [ 42.854]
    [ 42.854] Current version of pixman: 0.24.0
    [ 42.854] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 42.854] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 42.855] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 10 17:07:34 2011
    [ 42.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 42.927] (==) ServerLayout "DualSreen"
    [ 42.927] (**) |-->Screen "Screen0" (0)
    [ 42.927] (**) | |-->Monitor "Monitor0"
    [ 42.945] (**) | |-->Device "Device0"
    [ 42.945] (**) |-->Screen "Screen1" (1)
    [ 42.945] (**) | |-->Monitor "Monitor1"
    [ 42.945] (**) | |-->Device "Device1"
    [ 42.945] (**) Option "Xinerama" "1"
    [ 42.945] (==) Automatically adding devices
    [ 42.945] (==) Automatically enabling devices
    [ 42.945] (**) Xinerama: enabled
    [ 43.004] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 43.004] Entry deleted from font path.
    [ 43.004] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 43.004] Entry deleted from font path.
    [ 43.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 43.005] Entry deleted from font path.
    [ 43.005] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 43.005] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 43.005] Entry deleted from font path.
    [ 43.005] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 43.005] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 43.005] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 43.005] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 43.005] (II) Loader magic: 0x7ccae0
    [ 43.005] (II) Module ABI versions:
    [ 43.005] X.Org ANSI C Emulation: 0.4
    [ 43.005] X.Org Video Driver: 11.0
    [ 43.005] X.Org XInput driver : 13.0
    [ 43.005] X.Org Server Extension : 6.0
    [ 43.006] (--) PCI:*(0:0:2:0) 8086:0046:1028:0466 rev 2, Mem @ 0xfac00000/4194304, 0xc0000000/268435456, I/O @ 0x0000f080/8
    [ 43.006] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 43.006] (II) LoadModule: "extmod"
    [ 43.027] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 43.043] (II) Module extmod: vendor="X.Org Foundation"
    [ 43.043] compiled for 1.11.2, module version = 1.0.0
    [ 43.043] Module class: X.Org Server Extension
    [ 43.043] ABI class: X.Org Server Extension, version 6.0
    [ 43.043] (II) Loading extension MIT-SCREEN-SAVER
    [ 43.043] (II) Loading extension XFree86-VidModeExtension
    [ 43.043] (II) Loading extension XFree86-DGA
    [ 43.043] (II) Loading extension DPMS
    [ 43.043] (II) Loading extension XVideo
    [ 43.043] (II) Loading extension XVideo-MotionCompensation
    [ 43.043] (II) Loading extension X-Resource
    [ 43.044] (II) LoadModule: "dbe"
    [ 43.044] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 43.045] (II) Module dbe: vendor="X.Org Foundation"
    [ 43.045] compiled for 1.11.2, module version = 1.0.0
    [ 43.045] Module class: X.Org Server Extension
    [ 43.045] ABI class: X.Org Server Extension, version 6.0
    [ 43.045] (II) Loading extension DOUBLE-BUFFER
    [ 43.045] (II) LoadModule: "glx"
    [ 43.045] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 43.060] (II) Module glx: vendor="X.Org Foundation"
    [ 43.060] compiled for 1.11.2, module version = 1.0.0
    [ 43.060] ABI class: X.Org Server Extension, version 6.0
    [ 43.060] (==) AIGLX enabled
    [ 43.060] (II) Loading extension GLX
    [ 43.060] (II) LoadModule: "record"
    [ 43.060] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 43.061] (II) Module record: vendor="X.Org Foundation"
    [ 43.061] compiled for 1.11.2, module version = 1.13.0
    [ 43.061] Module class: X.Org Server Extension
    [ 43.061] ABI class: X.Org Server Extension, version 6.0
    [ 43.061] (II) Loading extension RECORD
    [ 43.061] (II) LoadModule: "dri"
    [ 43.061] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 43.063] (II) Module dri: vendor="X.Org Foundation"
    [ 43.063] compiled for 1.11.2, module version = 1.0.0
    [ 43.063] ABI class: X.Org Server Extension, version 6.0
    [ 43.063] (II) Loading extension XFree86-DRI
    [ 43.063] (II) LoadModule: "dri2"
    [ 43.063] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 43.064] (II) Module dri2: vendor="X.Org Foundation"
    [ 43.064] compiled for 1.11.2, module version = 1.2.0
    [ 43.064] ABI class: X.Org Server Extension, version 6.0
    [ 43.064] (II) Loading extension DRI2
    [ 43.064] (II) LoadModule: "intel"
    [ 43.091] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 43.114] (II) Module intel: vendor="X.Org Foundation"
    [ 43.114] compiled for 1.10.99.902, module version = 2.16.0
    [ 43.114] Module class: X.Org Video Driver
    [ 43.114] ABI class: X.Org Video Driver, version 11.0
    [ 43.114] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
    [ 43.114] (++) using VT number 7
    [ 43.134] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 43.135] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 43.135] Requested Entity already in use!
    [ 43.135] (EE) Screen 1 deleted because of no matching config section.
    [ 43.135] (II) UnloadModule: "intel"
    [ 43.136] (II) Unloading intel
    [ 43.136] drmOpenDevice: node name is /dev/dri/card0
    [ 43.136] drmOpenDevice: open result is 8, (OK)
    [ 43.136] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 43.136] drmOpenDevice: node name is /dev/dri/card0
    [ 43.136] drmOpenDevice: open result is 8, (OK)
    [ 43.136] drmOpenByBusid: drmOpenMinor returns 8
    [ 43.136] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 43.136] (**) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 43.136] (==) intel(0): RGB weight 888
    [ 43.136] (==) intel(0): Default visual is TrueColor
    [ 43.136] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
    [ 43.136] (--) intel(0): Chipset: "Arrandale"
    [ 43.136] (**) intel(0): Relaxed fencing enabled
    [ 43.136] (**) intel(0): Wait on SwapBuffers? enabled
    [ 43.136] (**) intel(0): Triple buffering? enabled
    [ 43.136] (**) intel(0): Framebuffer tiled
    [ 43.136] (**) intel(0): Pixmaps tiled
    [ 43.136] (**) intel(0): 3D buffers tiled
    [ 43.136] (**) intel(0): SwapBuffers wait enabled
    [ 43.136] (==) intel(0): video overlay key set to 0x101fe
    [ 43.136] (II) intel(0): Output LVDS1 using monitor section Monitor0
    [ 43.136] (**) intel(0): Option "Enable" "true"
    [ 43.136] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 43.196] (II) intel(0): Output VGA1 has no monitor section
    [ 43.196] (II) intel(0): EDID for output LVDS1
    [ 43.196] (II) intel(0): Manufacturer: BOE Model: 58e Serial#: 0
    [ 43.196] (II) intel(0): Year: 2010 Week: 1
    [ 43.196] (II) intel(0): EDID Version: 1.4
    [ 43.196] (II) intel(0): Digital Display Input
    [ 43.196] (II) intel(0): Undefined color depth
    [ 43.196] (II) intel(0): Digital interface is undefined
    [ 43.196] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
    [ 43.196] (II) intel(0): Gamma: 2.20
    [ 43.196] (II) intel(0): No DPMS capabilities specified
    [ 43.196] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 43.196] (II) intel(0): First detailed timing is preferred mode
    [ 43.196] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 43.196] (II) intel(0): redX: 0.574 redY: 0.335 greenX: 0.335 greenY: 0.585
    [ 43.196] (II) intel(0): blueX: 0.154 blueY: 0.119 whiteX: 0.312 whiteY: 0.328
    [ 43.196] (II) intel(0): Manufacturer's mask: 0
    [ 43.196] (II) intel(0): Supported detailed timing:
    [ 43.196] (II) intel(0): clock: 72.3 MHz Image Size: 309 x 173 mm
    [ 43.196] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
    [ 43.196] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
    [ 43.196] (II) intel(0): Supported detailed timing:
    [ 43.196] (II) intel(0): clock: 72.3 MHz Image Size: 309 x 173 mm
    [ 43.196] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
    [ 43.196] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
    [ 43.196] (II) intel(0): KFDV9HT14101
    [ 43.196] (II) intel(0): Unknown vendor-specific block 0
    [ 43.196] (II) intel(0): EDID (in hex):
    [ 43.196] (II) intel(0): 00ffffffffffff0009e58e0500000000
    [ 43.196] (II) intel(0): 01140104801f11780a3fa09355559527
    [ 43.196] (II) intel(0): 1e505400000001010101010101010101
    [ 43.196] (II) intel(0): 010101010101411c56a0500016303020
    [ 43.196] (II) intel(0): 360035ad1000001a411c56a050001630
    [ 43.196] (II) intel(0): 3020360035ad1000001a000000fe004b
    [ 43.196] (II) intel(0): 46445639814854313431303100000000
    [ 43.196] (II) intel(0): 00004101940100000001010a20200000
    [ 43.196] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 43.196] (II) intel(0): Printing DDC gathered Modelines:
    [ 43.196] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 43.196] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 43.196] (II) intel(0): Printing probed modes for output LVDS1
    [ 43.196] (II) intel(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 43.196] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 43.196] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 43.196] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 43.196] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 43.255] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 43.255] (II) intel(0): EDID for output VGA1
    [ 43.255] (II) intel(0): Manufacturer: PHL Model: c02d Serial#: 9740
    [ 43.255] (II) intel(0): Year: 2009 Week: 35
    [ 43.255] (II) intel(0): EDID Version: 1.3
    [ 43.255] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 43.255] (II) intel(0): Sync: Separate
    [ 43.255] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
    [ 43.255] (II) intel(0): Gamma: 2.20
    [ 43.255] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
    [ 43.255] (II) intel(0): First detailed timing is preferred mode
    [ 43.255] (II) intel(0): redX: 0.635 redY: 0.335 greenX: 0.281 greenY: 0.597
    [ 43.255] (II) intel(0): blueX: 0.153 blueY: 0.085 whiteX: 0.312 whiteY: 0.328
    [ 43.255] (II) intel(0): Supported established timings:
    [ 43.255] (II) intel(0): 720x400@70Hz
    [ 43.255] (II) intel(0): 640x480@60Hz
    [ 43.255] (II) intel(0): 640x480@67Hz
    [ 43.255] (II) intel(0): 640x480@72Hz
    [ 43.255] (II) intel(0): 640x480@75Hz
    [ 43.255] (II) intel(0): 800x600@56Hz
    [ 43.255] (II) intel(0): 800x600@60Hz
    [ 43.255] (II) intel(0): 800x600@72Hz
    [ 43.255] (II) intel(0): 800x600@75Hz
    [ 43.255] (II) intel(0): 832x624@75Hz
    [ 43.255] (II) intel(0): 1024x768@60Hz
    [ 43.255] (II) intel(0): 1024x768@70Hz
    [ 43.255] (II) intel(0): 1024x768@75Hz
    [ 43.255] (II) intel(0): Manufacturer's mask: 0
    [ 43.255] (II) intel(0): Supported standard timings:
    [ 43.255] (II) intel(0): #0: hsize: 640 vsize 400 refresh: 70 vid: 2609
    [ 43.255] (II) intel(0): #1: hsize: 1024 vsize 768 refresh: 72 vid: 19553
    [ 43.255] (II) intel(0): Supported detailed timing:
    [ 43.255] (II) intel(0): clock: 85.8 MHz Image Size: 344 x 194 mm
    [ 43.255] (II) intel(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
    [ 43.255] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
    [ 43.255] (II) intel(0): Serial No: AU50935009740
    [ 43.255] (II) intel(0): Monitor name: Philips 160E
    [ 43.255] (II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 60 kHz, PixClock max 86 MHz
    [ 43.255] (II) intel(0): EDID (in hex):
    [ 43.255] (II) intel(0): 00ffffffffffff00410c2dc00c260000
    [ 43.255] (II) intel(0): 23130103682213782ab370a255489827
    [ 43.255] (II) intel(0): 155054bfee00310a614c010101010101
    [ 43.255] (II) intel(0): 0101010101017f2156aa51001e30468f
    [ 43.255] (II) intel(0): 330058c21000001e000000ff00415535
    [ 43.255] (II) intel(0): 30393335303039373430000000fc0050
    [ 43.255] (II) intel(0): 68696c69707320313630450a000000fd
    [ 43.255] (II) intel(0): 00384c1e3c08000a20202020202000c0
    [ 43.255] (II) intel(0): Printing probed modes for output VGA1
    [ 43.255] (II) intel(0): Modeline "1366x768"x60.0 85.75 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.9 kHz)
    [ 43.255] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
    [ 43.255] (II) intel(0): Modeline "1024x768"x72.0 78.44 1024 1080 1192 1360 768 769 772 801 -hsync +vsync (57.7 kHz)
    [ 43.255] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 43.255] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 43.255] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 43.255] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 43.255] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 43.255] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 43.255] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 43.255] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
    [ 43.255] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 43.255] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 43.255] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 43.255] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 43.255] (II) intel(0): Output LVDS1 enabled by config file
    [ 43.255] (II) intel(0): Output VGA1 connected
    [ 43.255] (II) intel(0): Using exact sizes for initial modes
    [ 43.255] (II) intel(0): Output LVDS1 using initial mode 1366x768
    [ 43.255] (II) intel(0): Output VGA1 using initial mode 1366x768
    [ 43.255] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 43.255] (II) intel(0): Kernel page flipping support detected, enabling
    [ 43.255] (**) intel(0): Display dimensions: (310, 170) mm
    [ 43.255] (**) intel(0): DPI set to (111, 114)
    [ 43.255] (II) Loading sub module "fb"
    [ 43.255] (II) LoadModule: "fb"
    [ 43.255] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 43.277] (II) Module fb: vendor="X.Org Foundation"
    [ 43.277] compiled for 1.11.2, module version = 1.0.0
    [ 43.277] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 43.277] (II) Loading sub module "dri2"
    [ 43.277] (II) LoadModule: "dri2"
    [ 43.277] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 43.277] (II) Module dri2: vendor="X.Org Foundation"
    [ 43.277] compiled for 1.11.2, module version = 1.2.0
    [ 43.277] ABI class: X.Org Server Extension, version 6.0
    [ 43.277] (==) Depth 24 pixmap format is 32 bpp
    [ 43.277] (II) intel(0): [DRI2] Setup complete
    [ 43.277] (II) intel(0): [DRI2] DRI driver: i965
    [ 43.277] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
    [ 43.339] (II) UXA(0): Driver registered support for the following operations:
    [ 43.339] (II) solid
    [ 43.339] (II) copy
    [ 43.339] (II) composite (RENDER acceleration)
    [ 43.339] (II) put_image
    [ 43.339] (II) get_image
    [ 43.339] (==) intel(0): Backing store disabled
    [ 43.339] (==) intel(0): Silken mouse enabled
    [ 43.339] (II) intel(0): Initializing HW Cursor
    [ 43.456] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 43.466] (==) intel(0): DPMS enabled
    [ 43.466] (==) intel(0): Intel XvMC decoder enabled
    [ 43.466] (II) intel(0): Set up textured video
    [ 43.466] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 43.466] (II) intel(0): direct rendering: DRI2 Enabled
    [ 43.466] (WW) intel(0): Option "Enable" is not used
    [ 43.466] (WW) intel(0): Option "TwinView" is not used
    [ 43.466] (==) intel(0): hotplug detection: "enabled"
    [ 43.466] (--) RandR disabled
    [ 43.466] (II) Initializing built-in extension Generic Event Extension
    [ 43.466] (II) Initializing built-in extension SHAPE
    [ 43.466] (II) Initializing built-in extension MIT-SHM
    [ 43.466] (II) Initializing built-in extension XInputExtension
    [ 43.466] (II) Initializing built-in extension XTEST
    [ 43.466] (II) Initializing built-in extension BIG-REQUESTS
    [ 43.466] (II) Initializing built-in extension SYNC
    [ 43.466] (II) Initializing built-in extension XKEYBOARD
    [ 43.466] (II) Initializing built-in extension XC-MISC
    [ 43.466] (II) Initializing built-in extension SECURITY
    [ 43.466] (II) Initializing built-in extension XINERAMA
    [ 43.466] (II) Initializing built-in extension XFIXES
    [ 43.466] (II) Initializing built-in extension RENDER
    [ 43.466] (II) Initializing built-in extension RANDR
    [ 43.466] (II) Initializing built-in extension COMPOSITE
    [ 43.466] (II) Initializing built-in extension DAMAGE
    [ 43.605] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 43.605] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 43.605] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 43.605] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 43.605] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 43.605] (II) AIGLX: Loaded and initialized i965
    [ 43.605] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 43.605] (II) intel(0): Setting screen physical size to 361 x 203
    [ 43.909] (II) config/udev: Adding input device Power Button (/dev/input/event7)
    [ 43.910] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 43.910] (II) LoadModule: "evdev"
    [ 43.910] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.910] (II) Module evdev: vendor="X.Org Foundation"
    [ 43.910] compiled for 1.10.99.902, module version = 2.6.0
    [ 43.910] Module class: X.Org XInput Driver
    [ 43.910] ABI class: X.Org XInput driver, version 13.0
    [ 43.910] (II) Using input driver 'evdev' for 'Power Button'
    [ 43.910] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.911] (**) Power Button: always reports core events
    [ 43.911] (**) Power Button: Device: "/dev/input/event7"
    [ 43.911] (--) Power Button: Found keys
    [ 43.911] (II) Power Button: Configuring as keyboard
    [ 43.911] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event7"
    [ 43.911] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 43.911] (**) Option "xkb_rules" "evdev"
    [ 43.911] (**) Option "xkb_model" "evdev"
    [ 43.911] (**) Option "xkb_layout" "us"
    [ 43.931] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
    [ 43.931] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 43.931] (II) Using input driver 'evdev' for 'Video Bus'
    [ 43.931] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.931] (**) Video Bus: always reports core events
    [ 43.931] (**) Video Bus: Device: "/dev/input/event15"
    [ 43.931] (--) Video Bus: Found keys
    [ 43.931] (II) Video Bus: Configuring as keyboard
    [ 43.931] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15/event15"
    [ 43.931] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 43.931] (**) Option "xkb_rules" "evdev"
    [ 43.931] (**) Option "xkb_model" "evdev"
    [ 43.931] (**) Option "xkb_layout" "us"
    [ 43.932] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 43.932] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 43.932] (II) Using input driver 'evdev' for 'Power Button'
    [ 43.932] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.932] (**) Power Button: always reports core events
    [ 43.932] (**) Power Button: Device: "/dev/input/event4"
    [ 43.932] (--) Power Button: Found keys
    [ 43.932] (II) Power Button: Configuring as keyboard
    [ 43.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 43.932] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 43.932] (**) Option "xkb_rules" "evdev"
    [ 43.932] (**) Option "xkb_model" "evdev"
    [ 43.932] (**) Option "xkb_layout" "us"
    [ 43.932] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
    [ 43.932] (II) No input driver/identifier specified (ignoring)
    [ 43.932] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
    [ 43.932] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 43.932] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 43.932] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.932] (**) Sleep Button: always reports core events
    [ 43.932] (**) Sleep Button: Device: "/dev/input/event6"
    [ 43.932] (--) Sleep Button: Found keys
    [ 43.932] (II) Sleep Button: Configuring as keyboard
    [ 43.932] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event6"
    [ 43.932] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 43.933] (**) Option "xkb_rules" "evdev"
    [ 43.933] (**) Option "xkb_model" "evdev"
    [ 43.933] (**) Option "xkb_layout" "us"
    [ 43.933] (II) config/udev: Adding input device HID 413c:8161 (/dev/input/event2)
    [ 43.933] (**) HID 413c:8161: Applying InputClass "evdev keyboard catchall"
    [ 43.933] (II) Using input driver 'evdev' for 'HID 413c:8161'
    [ 43.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.933] (**) HID 413c:8161: always reports core events
    [ 43.933] (**) HID 413c:8161: Device: "/dev/input/event2"
    [ 43.933] (--) HID 413c:8161: Found keys
    [ 43.933] (II) HID 413c:8161: Configuring as keyboard
    [ 43.933] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/input/input2/event2"
    [ 43.933] (II) XINPUT: Adding extended input device "HID 413c:8161" (type: KEYBOARD, id 10)
    [ 43.933] (**) Option "xkb_rules" "evdev"
    [ 43.933] (**) Option "xkb_model" "evdev"
    [ 43.933] (**) Option "xkb_layout" "us"
    [ 43.934] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/event3)
    [ 43.934] (**) HID 413c:8162: Applying InputClass "evdev pointer catchall"
    [ 43.934] (II) Using input driver 'evdev' for 'HID 413c:8162'
    [ 43.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.934] (**) HID 413c:8162: always reports core events
    [ 43.934] (**) HID 413c:8162: Device: "/dev/input/event3"
    [ 43.934] (--) HID 413c:8162: Found 3 mouse buttons
    [ 43.934] (--) HID 413c:8162: Found relative axes
    [ 43.934] (--) HID 413c:8162: Found x and y relative axes
    [ 43.934] (II) HID 413c:8162: Configuring as mouse
    [ 43.934] (**) HID 413c:8162: YAxisMapping: buttons 4 and 5
    [ 43.934] (**) HID 413c:8162: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 43.934] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/input/input3/event3"
    [ 43.934] (II) XINPUT: Adding extended input device "HID 413c:8162" (type: MOUSE, id 11)
    [ 43.934] (II) HID 413c:8162: initialized for relative axes.
    [ 43.934] (**) HID 413c:8162: (accel) keeping acceleration scheme 1
    [ 43.934] (**) HID 413c:8162: (accel) acceleration profile 0
    [ 43.934] (**) HID 413c:8162: (accel) acceleration factor: 2.000
    [ 43.934] (**) HID 413c:8162: (accel) acceleration threshold: 4
    [ 43.934] (II) config/udev: Adding input device HID 413c:8162 (/dev/input/mouse1)
    [ 43.934] (II) No input driver/identifier specified (ignoring)
    [ 43.934] (II) config/udev: Adding input device Laptop_Integrated_Webcam_0.3M (/dev/input/event10)
    [ 43.934] (**) Laptop_Integrated_Webcam_0.3M: Applying InputClass "evdev keyboard catchall"
    [ 43.934] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_0.3M'
    [ 43.934] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.934] (**) Laptop_Integrated_Webcam_0.3M: always reports core events
    [ 43.934] (**) Laptop_Integrated_Webcam_0.3M: Device: "/dev/input/event10"
    [ 43.934] (--) Laptop_Integrated_Webcam_0.3M: Found keys
    [ 43.934] (II) Laptop_Integrated_Webcam_0.3M: Configuring as keyboard
    [ 43.934] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
    [ 43.934] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_0.3M" (type: KEYBOARD, id 12)
    [ 43.934] (**) Option "xkb_rules" "evdev"
    [ 43.934] (**) Option "xkb_model" "evdev"
    [ 43.934] (**) Option "xkb_layout" "us"
    [ 43.935] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
    [ 43.935] (II) No input driver/identifier specified (ignoring)
    [ 43.935] (II) config/udev: Adding input device HDA Intel Mic at Ext Right Jack (/dev/input/event12)
    [ 43.935] (II) No input driver/identifier specified (ignoring)
    [ 43.935] (II) config/udev: Adding input device HDA Intel HP Out at Ext Right Jack (/dev/input/event13)
    [ 43.935] (II) No input driver/identifier specified (ignoring)
    [ 43.935] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
    [ 43.935] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
    [ 43.935] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
    [ 43.935] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.936] (**) USB OPTICAL MOUSE: always reports core events
    [ 43.936] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
    [ 43.936] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
    [ 43.936] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
    [ 43.936] (--) USB OPTICAL MOUSE: Found relative axes
    [ 43.936] (--) USB OPTICAL MOUSE: Found x and y relative axes
    [ 43.936] (II) USB OPTICAL MOUSE: Configuring as mouse
    [ 43.936] (II) USB OPTICAL MOUSE: Adding scrollwheel support
    [ 43.936] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
    [ 43.936] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 43.936] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1/event1"
    [ 43.936] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 13)
    [ 43.936] (II) USB OPTICAL MOUSE: initialized for relative axes.
    [ 43.936] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
    [ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
    [ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
    [ 43.936] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
    [ 43.936] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
    [ 43.936] (II) No input driver/identifier specified (ignoring)
    [ 43.936] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 43.936] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 43.936] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 43.936] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.936] (**) AT Translated Set 2 keyboard: always reports core events
    [ 43.936] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 43.936] (--) AT Translated Set 2 keyboard: Found keys
    [ 43.936] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 43.936] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 43.936] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    [ 43.936] (**) Option "xkb_rules" "evdev"
    [ 43.936] (**) Option "xkb_model" "evdev"
    [ 43.936] (**) Option "xkb_layout" "us"
    [ 43.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event14)
    [ 43.937] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
    [ 43.937] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
    [ 43.937] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.937] (**) PS/2 Generic Mouse: always reports core events
    [ 43.937] (**) PS/2 Generic Mouse: Device: "/dev/input/event14"
    [ 43.937] (--) PS/2 Generic Mouse: Found 3 mouse buttons
    [ 43.937] (--) PS/2 Generic Mouse: Found relative axes
    [ 43.937] (--) PS/2 Generic Mouse: Found x and y relative axes
    [ 43.937] (II) PS/2 Generic Mouse: Configuring as mouse
    [ 43.937] (**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    [ 43.937] (**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 43.937] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input14/event14"
    [ 43.937] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 15)
    [ 43.937] (II) PS/2 Generic Mouse: initialized for relative axes.
    [ 43.937] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    [ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
    [ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
    [ 43.937] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
    [ 43.937] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse2)
    [ 43.937] (II) No input driver/identifier specified (ignoring)
    [ 43.937] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
    [ 43.937] (II) No input driver/identifier specified (ignoring)
    [ 43.938] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
    [ 43.938] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 43.938] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 43.938] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 43.938] (**) Dell WMI hotkeys: always reports core events
    [ 43.938] (**) Dell WMI hotkeys: Device: "/dev/input/event9"
    [ 43.938] (--) Dell WMI hotkeys: Found keys
    [ 43.938] (II) Dell WMI hotkeys: Configuring as keyboard
    [ 43.938] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
    [ 43.938] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
    [ 43.938] (**) Option "xkb_rules" "evdev"
    [ 43.938] (**) Option "xkb_model" "evdev"
    [ 43.938] (**) Option "xkb_layout" "us"
    [ 48.392] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 48.392] (II) intel(0): Printing DDC gathered Modelines:
    [ 48.392] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 48.456] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 48.457] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 48.457] (II) intel(0): Printing DDC gathered Modelines:
    [ 48.457] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 48.517] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 49.976] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 49.976] (II) intel(0): Printing DDC gathered Modelines:
    [ 49.976] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 50.035] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 213.440] (II) config/udev: removing device USB OPTICAL MOUSE
    [ 213.440] (II) USB OPTICAL MOUSE: Close
    [ 213.440] (II) UnloadModule: "evdev"
    [ 213.440] (II) Unloading evdev
    [ 213.728] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
    [ 213.728] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
    [ 213.728] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
    [ 213.728] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 213.728] (**) USB OPTICAL MOUSE: always reports core events
    [ 213.728] (**) USB OPTICAL MOUSE: Device: "/dev/input/event1"
    [ 213.728] (--) USB OPTICAL MOUSE: Found 3 mouse buttons
    [ 213.728] (--) USB OPTICAL MOUSE: Found scroll wheel(s)
    [ 213.728] (--) USB OPTICAL MOUSE: Found relative axes
    [ 213.728] (--) USB OPTICAL MOUSE: Found x and y relative axes
    [ 213.728] (II) USB OPTICAL MOUSE: Configuring as mouse
    [ 213.728] (II) USB OPTICAL MOUSE: Adding scrollwheel support
    [ 213.728] (**) USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
    [ 213.728] (**) USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 213.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input16/event1"
    [ 213.728] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 13)
    [ 213.728] (II) USB OPTICAL MOUSE: initialized for relative axes.
    [ 213.728] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
    [ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
    [ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
    [ 213.728] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
    [ 213.730] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
    [ 213.730] (II) No input driver/identifier specified (ignoring)
    [ 1627.253] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1627.253] (II) intel(0): Printing DDC gathered Modelines:
    [ 1627.253] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1627.311] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 1644.964] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1644.964] (II) intel(0): Printing DDC gathered Modelines:
    [ 1644.964] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1645.027] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 1645.042] (II) intel(0): Allocated new frame buffer 2752x768 stride 11264, tiled
    [ 1645.230] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1645.230] (II) intel(0): Printing DDC gathered Modelines:
    [ 1645.230] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1645.289] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 1645.307] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1645.307] (II) intel(0): Printing DDC gathered Modelines:
    [ 1645.307] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1645.365] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 1645.387] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1645.387] (II) intel(0): Printing DDC gathered Modelines:
    [ 1645.387] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1645.446] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 1645.447] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 1645.447] (II) intel(0): Printing DDC gathered Modelines:
    [ 1645.447] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 1645.505] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    [ 2335.972] (II) intel(0): EDID vendor "BOE", prod id 1422
    [ 2335.972] (II) intel(0): Printing DDC gathered Modelines:
    [ 2335.972] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 771 777 790 +hsync -vsync (47.4 kHz)
    [ 2336.030] (WW) EDID timing clock 85.75 exceeds claimed max 85MHz, fixing
    lspci output
    00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
    00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
    00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
    00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
    00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05)
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
    00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
    00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
    00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
    12:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
    13:00.0 Ethernet controller: Atheros Communications AR8152 v2.0 Fast Ethernet (rev c1)
    ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
    ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
    ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
    ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
    ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
    ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

    No one? I have the exact same problem. MSI x360 laptop, intel onboard graphics. I too use xrandr. I've seen elsewhere that windows users have solved this by turning off GPU overclocking. Maybe this can point us in the right direction?

  • Display flickers on start up

    My display flickers slowly when coming out of sleep or booting up. After a short while the monitor works perfectly.  After it goes into sleep mode, or when the screen saver goes dark, upon awakening the flicker starts again. I recently replaced my ATI Radeon HD 5770 graphics card and VGA cable that connects to Mini Displayport / VGA adapter.  Any idea what the problem might be and how to fix?

    Converting Mini DisplayPort to VGA is fairly difficult.
    If you are not using the larger DVI-I port, I suggest you buy a cheap adapter that pulls the Card-generated VGA directly off that -- no conversion required. The VGA signals are in the bar at the end and the four pins around it, plus one more pin from the top row of the grid. Salmon-pink in this diagram:
    --diagram courtesy of Wikipedia

  • [Solved] Can't get external monitor to display correct resolution

    I have a laptop with 1280x800 resolution, I hooked up a spare monitor we had sitting around that has a native resolution of 1280x1024 to my laptop. When I hook it up the external monitor displays a resolution of 1024x768. I use KDE 4.5, so I tried to change the resolution for the external monitor in System Settings but 1024x768 is the highest resolution listed.
    I've tried messing around with xrandr through the command line (somewhat anyway) but I'm at a loss in trying to get the external monitor to display its native resolution. I'd like to get the external monitor to possibly replace my laptop monitor as it would add another 224 vertical pixels. Anyone have any ideas?
    Last edited by herrvideman (2010-08-31 02:17:48)

    You had said the native resolution is 1280x1024 -- I therefore assume this is an LCD monitor.
    I would not generally expect LCDs to flicker.  At what vertical frequency are you driving the display? Most LCDs operate at 60Hz.  This is regardless of the local power line frequency or television standard.
    Many CRT monitors are driven at 75 Hz to keep them from flickering or from "beating" with ambient lighting that is flickering at the local power line frequency (50 or 60 Hz).  Again, this is not the correct thing to do with LCDs.
    Bottom Line: Make sure your vertical frame rate is 60 Hz.

Maybe you are looking for