Monitor is enabled - greyed out

Hi Guys, hopefully a simple one.
I'm trying to enable the monitor 'Windows Server 2008 Logical Disk - Logical Disk Free Space'. When I look at the properties of this monitor, the 'Monitor is enabled' tick box is greyed out. 
I read online that you need to put in an override to enable it, so i did this, yet it's still in the same state. So my question/s:
1) what do i need to do to enable it?
2) If I have to use an override to enable it, do I have to specify the parameters within the override itself i.e. thresholds etc.?
Here is a picture of the override that I currently have in place.
Thanks, David.

Hi,
>do I have to specify the parameters within the override itself i.e. thresholds etc.?
No, you do not have to override all parameters, only those you need to change.
Monitor in Authoring tab will remain 'gray', this panel doesn't show overrides because you can have many overrides for a single monitor (enabled for one server or group of servers, disabled for another).
http://OpsMgr.ru/

Similar Messages

  • When installing Logic Pro 8, "skip" is enabled/greyed out on Logic Pro Box

    Hey all
    I'm trying to install Logic Pro 8 for the first time on on iMac, however when i get to the custom install options, the "skip" box next to Logic Pro is enabled, and greyed out, and i can't change it, therefore i can't actually install Logic. I can install main stage, compressor etc, but not logic.
    Any ideas? I have no trace of previous installations on my system as its never been installed with this set up of snow leopard, but i have double checked everywhere in my prefs, application support etc.
    I'm confused and its very frustrating!

    Use Pacifist to install it manually.
    (48572)

  • Adapter Monitor Adapter on greyed out

    Hi
    Under RWD --> Component Monitoring -->Adapter Engine --> Adapter Monitor some of the Adapter(File,RFC,JDBD,JSM,Soup) are greyed out.
    We are useing XI 3.0,
    any Solution or idea is highly appreciated.
    Thanks
    Madavi

    Thank you for your reply,
    i have check the cache is uptoday, but when we do cache refresh it give a error
    "The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    Invalid at the top level of the document. Error processing resource 'http://100.4.35.6.0:50100/CPACache/refresh?mode=full'. Line...
    CPA cache refresh (mode=full) successfully executed in 164135 milliseconds"
    once the refresh is done i can not see the Adapter in Adapter Monitor .and then we restart the services in VA it come back.
    sicf look good all services are active
    can you please tell how to one comunnication channel using file adapter and activate
    Thanks
    Madavi

  • Tecra A9 - "monitor properties" option is greyed out

    Tecra A9 (PTs52A)
    In Display settings - advanced - monitor - properties is greyed out.
    Think this may have been like it since I added service pack 3 for XP.
    Was able to add second monitor and chnage primary & secondary displays before but as properties is greyed out I can't any longer.

    Hello
    As far as I know when you click there on properties you will be linked on the same properties that you can open for monitor in device manager.
    Which monitor type is listed there?
    As far as I know there is place to define primary or secondary monitor. You can do this in display settings where the display 1 and 2 are graphically shown.
    Last two options can be defined with check mark. Of course it can be done if the external display is connected and recognized.

  • Iphone fingerprint options are greyed out and won't enable!!

    I Have had my iPhone 5s since feb and never had an issue, but just yesterday the finger print scanner stopped working... Went back in to enable and the options are greyed out.. When I click them to enable them it just says failed. Have restored and turned off loads!! Help!!!!

    Try a reset, hold down the home/sleep button together until you see the apple logo and then release then wait for the phone to boot back up.
    iPhone 5s: Using Touch ID
    You still have a 4 digit passcode turn on right?

  • How do I enable my camera when the option is greyed out in iChat?

    This may be a dumb question, especially as I only 'converted' to Macs 3 days ago... but when I start iChat the option to enable my camera is greyed out (it wasn't this morning when I checked) - what have I pressed to disable it and how do I re-enable it?
    I have a MacBook Pro with a built-in camera (bought 3 days ago strangely....)
    Thanks for any advice you can offer

    Two Places to Check
    In iChat in the Video menu (May say Audio) to the right of the Buddies one there is Camera Enabled. It should show a tick next to it.
    Next in the View Menu the Show Video Status item also needs a tick.
    If those two items are ticked then go to the Apple icon top left > About this Mac > More Info button to open the System Profiler.
    Use the reveal Triangles and go to Hardware > USB and see if the camera is listed.
    8:33 PM Wednesday; April 23, 2008

  • I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

    I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

    Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.

  • IPod appears on Desktop - enable disk use checked, greyed-out

    Each of my daughters has a video iPod--
    The "white" one - about 11 months old, now appears on the desktop when connected. iTunes opens, but the choice "enable disk use" is greyed-out, i.e. I cannot un-check this, and each time the iPod icon appears on the desktop.
    The "black" iPod-- just a few days old, but essentially the same video iPod-- it does NOT appear on the desktop, and the "enable disk use" writing is NOT greyed-out, i.e. we could "check" this if we wanted.
    How to get the "white" iPod to no longer appear on the desktop? I have tried resetting it, but that doesn't seem to change anything.
    Also-- is there a reason why this appears on the desktop, and is that a limiting factor for any reason-- or a problem? Really just trying to understand this!
    Thanks for any comments.
    Steve
    Wednesday 30 May 2007

    If the iPod is set to sync manually, the enable disk use checkbox will always be on, as iTunes doesn't know when you will be done transferring content to the iPod and ready to unplug it. The iPod will appear on a Mac's desktop while iTunes is syncing it or waiting for you to transfer content to it, or when disk use is explicitly enabled and the iPod is plugged in to the computer.
    (21931)

  • How do I enable the Move Option When Importing (It's Greyed Out)

    Bonjour,
    I am trying to figure out why Aperture 2 does not ask to delete photos from camera (Canon SD950 IS) after import or why the "move" option is 'greyed' out. I have searched the forums here and have only seen people offer advice why this is not good. Not to be an A##, but I don't want advice. I need an answer to my question. How do I enable this functionality? I know that it is technically possible as the simple app "Image Capture" that comes with Leopard does exactly this.(Imports then Deletes from my camera) It's just that Aperture cost too much money in my opinion to force one to use an external app to do what you want done, especially since it is not a difficult function to perform as evidenced by aforementioned app in Leopard. TIA.
    Hardware: 17' Glossy HiRes Mac Book Pro 3.1 Intel Core 2 Duo 2.4 Ghz 4GB Ram
    OS: Mac OS X 10.5.3 All updates applied
    App: Aperture 2.1
    A bientot,
    William.

    Please don't take the following as a flame...
    <quote>The move option is grayed out when importing from a card to save you from yourself. At least that's what I've always assumed.</quote>
    That's a bit draconian don't you think? Why have the option greyed out if you don't want the user to be able to do this. It's kind of like saying hahah, this is possible to do, but, you, the user, are a moron. Why even place the option on the page in the first place.
    <quote>It just happens to be a bug that few on this forum care to see fixed because most of us feel that using it is unwise due to the danger of lost images and corrupted cards.</quote>
    Again, why put it on page as an option if it weren't intended to be enabled in a plist somewhere for those who wish to be 'unwise.'
    My logic is as follows: If Apple provides software that is more accessible to the 'unwashed masses' (because it's included with Leopard ie. Image Capture) and it deletes images directly from the camera, then why would a professional package (Aperture) limit the so called 'professional' from designing and using his/her own workflow governed by their own experience. Which could include first a backup to dvd or other device of your choice (keyword here: CHOICE) THEN import images and delete directly from the camera. Logically this is completely BACKWARDS, the app available to the 'masses'(Image Capture) should NOT let the user delete images directly from the camera and the 'professional' app (Aperture) should allow more flexibility for the advanced user who understands the implications of his/her work flow and adjusts accordingly.
    Besides, And I quote myself "I have searched the forums here and have only seen people offer advice why this is not good. Not to be an A##, but I don't want advice. I need an answer to my question. How do I enable this functionality?"
    Therefore, respectfully, your answer is: non sequitur.
    Best Regards

  • New User Question:  How do I enable comments in Reader when this option is greyed out on my menu?

    I cannot figure out what I am missing here.  I have a PDF Portfolio completed and now want to E-Mail for Review.  But this option is greyed out on my Comment Menu dropdown list.  What to do?  Thanks!

    Two Places to Check
    In iChat in the Video menu (May say Audio) to the right of the Buddies one there is Camera Enabled. It should show a tick next to it.
    Next in the View Menu the Show Video Status item also needs a tick.
    If those two items are ticked then go to the Apple icon top left > About this Mac > More Info button to open the System Profiler.
    Use the reveal Triangles and go to Hardware > USB and see if the camera is listed.
    8:33 PM Wednesday; April 23, 2008

  • All Agents Greyed Out or Not Monitored

    Hello,
    I am running SCOM 2012 R2.  All of my clients were re-imaged (Over 500) during the summer.  Each image that was created had the SCOM 2012 R2 Agent installed.  The images were installed on all of my clients.  Now, most of the clients are
    listed as greyed out or not monitored.  The server has Event Log entries of the following:
    Operations Manager has received a connection from a system running an older version of Operations Manager
    None of my clients are running an older version of the agent.  What's also new is that I cannot tell if my clients are turned on or not.  The clients that are green are always green.  Even when they are powered off, they are never grey
    in the console.  Even after I ping them or refresh.  They always stay green.  Any help would be appreciated.

    Hello,
    I deleted the Health Service State folder and I modified the DB so they are remotely manageable.  Now I am trying a repair.  But what I dont understand is why the healthy clients do not show when they are turned off?  They normally go from
    green to grey.  I've tried a ping and a refresh and I cannot get them to go grey.

  • How to Enable a Push Button In The Form That Is Always Greyed Out?

    Greetings All,
    I am trying to enable an existing "Return" Push Button(PB) which is always greyed out whenever the form is called in either an update or review mode. After some research, I found that this PB's functional property is "Enabled" (i.e. the enabled value = 'Yes'), and it is coded programatically set 'Off' in 30 places and 'On' in 2 places in the form that I inherit from my predecessor by using the following code:
    SET_ITEM_ON_OR_OFF('BLK_UPDATE.PB_RETURN', <XXXXX>);
    Where <XXXXX> could be either TRUE or FALSE. I've been spending a lot of time in trying to enable this "Return" PB (without modifying the existing programming code) by adding the 'SET_ITEM_ON_OR_OFF' built-in command to set the PB on in WHEN-BUTTON-PRESSED TRIGGER for the PB_RETURN and WHEN-NEW-FORM-INSTANCE Trigger, but all tries in vain. Could you please help me with the following question?
    What is the easiest way to enable a PB that is set programmatically?
    Is there something else I should know to enable a PB, in addition to what I have already mentioned above?
    Thanks in advance,
    Jinlan
    --

    Thanks all for your information and help. I included the following code, as suggested by Manu, in WHEN-MOUSE-DOWN TRIGGER for the PB_RETURN and WHEN-NEW-FORM-INSTANCE TRIGGER:
    SET_ITEM_PROPERTY ('BLK_UPDATE.PB_RETURN_WORK_REQ', ENABLED, PROPERTY_TRUE);
    and I made sure there was no " SET_ITEM_ON_OR_OFF('BLK_UPDATE.PB_RETURN_WORK_REQ', FALSE);" statements after the above code, but, the "Return" PB is still in grey; in other words, it is still not accessible when my form is called.
    Perhaps, I need to place the above SET_ITEM_PROPERTY code in a different trigger other than the triggers mentioned above, uh? Any thoughts on this?
    Manu,
    You are absolutely right that the "SET_ITEM_ON_OR_OFF" is an ih-house written procedure which is defined/stored in the Attached Libraries. (I should have checked before making the "built-in" assumption. Thanks for catching and clarifying this.) Please help me with the following questions:
    How do I view the procedure in the Attached Libraries???
    Thanks in advance,
    Jinlan
    --

  • WGM Sharing "Enable disk quotas on this volume" greyed out

    I plan on enabling disk quotas on my server and noticed that the checkbox for enabling quotas is greyed out. How do I enable it?
    It's a basic server that does my mail, afp, and website.

    I am not terribly familiar with WGM and Server, but I noticed that we could not "enable disk quotas" on a share-point, but could on an actual drive, the volume (click the ALL tab up top). We have 3 Drives, System, Data, an backup, with multiple share-points on the drives..
    We have 10.4.2 Server
    Since there is no need for me to enable it, I did not follow through with it to see where it led me...
    Just my $.02, and it could be worthless, anyway.
    Kevin
    15" Powerbook 800 Mhz DVI   Mac OS X (10.4.7)   Wishing to upgrade...

  • I have my photos on an eternal USB connected drive. I am trying to import them to PSE. The "Copy on Import" button is greyed out. How can I enable it so I can disconnect the external drive?.

    The "Copy on Import" button is greyed out. How can I enable it so I can disconnect the external drive?.

    "Copy" is normally used when connecting a camera or card reader.
    Simply copy or move folders from your external drive to your computer hard drive, then from the Organizer menu click:
    File >> Get Photos & Videos >> From Files & Folders
    Then navigate to the new location on your internal hard drive.

  • "enable auto import" is greyed out in new cc

    Previously, everytime I plugged in a SD card lightroom with automatically open up and start the import process. Since switching to CC, it isn't working this way, and the "enable auto import" is greyed out.  How do I fix this?

    I had this problem and I was able to fix it by editing the Windows registry (it was only a minor edit).
    I changed the value of the following registry key:
    HKEY_CLASSES_ROOT\Adobe.AdobeLightroom64\shell\open\command
    The value was:
    C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.7\Lightroom.exe "%L"
    I changed it to:
    C:\Program Files\Adobe\Adobe Lightroom\lightroom.exe "%L"

Maybe you are looking for