Monitor Linux Log

We follow the step to monitor linux log:
http://technet.microsoft.com/en-us/library/hh457589.aspx
however, when the alert appears, it never closed unless we closed them.
And log time remains the same even if we add another error text into log.
Is it possible to close the alert after some time period? (for ex: 3 mins?)
And how to let new alert appears when the new error log happens?

To Close an Alert Generated by a Monitor, you can refer below link
http://technet.microsoft.com/en-us/library/hh212689.aspx
Impact of Closing an Alert
http://technet.microsoft.com/en-us/library/hh212903.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Similar Messages

  • BMC Patrol monitoring listener.log in xml not txt format

    Hi !
    Oracle 11g, PatrolAgent V3.9.00.02i, KM 8.11.00
    My company uses BMC Patrol to monitor listener.log. Patrol knows listener.log's path from command:
    lsnrctl status <listener_name>
    and gets path to listener.log in xml fromat: log.xml from 'Listener Log File' field.
    The problem is that when Patrol discovers an error puts last 100 lines from that log into email and sends it to me. Obviously it is in xml format while I prefer txt format.
    Questions:
    1. how can I force listener to show path to listener.log in txt format in 'Listener Log File' field ?
    2. how can I tell Patrol to use different path to listener.log instead of one form 'Listener Log File' field ?
    Thanks in advance.

    I asked on BMC forum also but no helpful either. Does anyone know is it possible to configure listener to show path to listener.log insted of log.xml in status command ?

  • How to monitor user logs,security logs,trace file,and performance monitori

    Hi guys,
    pls tel me how to monitor user logs,security logs,trace file,and performance monitoring.
    thanks
    regards
    kamal

    Hi,
    you can have a look in the Netweaver administration :
    http://<portal>:<port>/nwa
    Go to monitoring, Java system reports, etc..., you will find what you want.
    Fabien.

  • Linux logging to a log table

    Bit off tag from the usual questions but i was wondering if
    anyone had any ideas for tailing linux logs into an oracle
    table. The end result would be mean easy analysis of system logs.
    If anyone has tried this or jusst some ideas that would be
    great - cheers
    null

    systemd-journal-gatewayd uses http. I'm not sure if that works with syslog (syslogd on FreeBSD, in my case), which uses UDP.

  • Can I monitor a Log file using EMGC 10.2.0.2?

    Hi,
    I am thinking of monitoring my web application log file using EMGC by creating a generic service is that possible. Now we are using some shell scripts to do that but its bit difficult to maintain all these shell scripts on each of the host. Is there any in built in mechanism that enable me to monitor the log file and when a perticular pattern match I would like to send a email notification to concerned people say application admins if there is no out of box option for this do we have plugins to do this. please let me know the possibility of implementing this using EMGC or extencibility plug-ins.
    Ashok Chava.

    Hi,
    I have used "Log File Pattern Matched Line Count" of host to monitor the log files and below is the pattern I have defined for the log file. But i could not find any alerts even there are so many such exceptions in the log file matching the patteren given in EMGC.
    /u01/app/oracle/product/IAS904/sysman/log/emias.log;%oracle.sysman.emSDK.util.jdk.EMException;%
    I have even add the log file in agent_home/sysman/config/lfm_ifiles file as given in the documentation but I could not see any alerts as expected am I doint anything wrong in my setup.
    Please let me know.
    Thanks,
    Ashok Chava

  • Linux log files

    How we can check the Linux log files , like where is the problem or overall OS activity?

    Most Linux OS logs are located in /var/log
    As far as how to find out where the problem is or overall activity. Take a look at the following link from the Oracle® Database Administrator's Reference
    10g Release 2 (10.2) for UNIX-Based Operating Systems
    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b15658/tuning.htm#sthref573

  • Monitor Action Log

    hi..
    Wat is MAL(Monitor Action Log) how do we maintain Reconcilation log for MAL. plz explain in simple words.
    indu

    Hi Indu,
    In more complex processes, for example if you work with external service providers, it can be useful to have an overview of the history of a JIT call. The action log gives you an overview of the individual actions and their results for each JIT call. The system logs successful and unsuccessful actions allowing you to recognize and analyze critical situations early on.  If an error occurs for a call you can use this function to look for that error
    To work with action logging you must have set the Logging Active indicator in call control. You do this in Customizing for JIT Inbound by choosing Call Control ® Define Call Control.
    You access the action log from the SAP Easy Access Menu by choosing Logistics ® Logistics Execution ® JIT Inbound or JIT Outbound ® Environment ® Display Action Log (Transaction JITLOG).
       You can also call up the action log for a call from JIT Monitoring Inbound or Outbound.
    Regards,
    Lakshman Kumar Ghattamaneni

  • 500 Internal Server Error - Channel Monitoring Audit Log

    Hi Experts,
    We are facing an error in the 'Audit Log' of the communication channel monitoring of a File Sender Adapter.
    The channel uses a custom written Java Module which uses XSLT parser internally. The audit log displays the following error:
    500   Internal Server Error
    Error: "Application error occurred during the request processing."
    Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
    Details: "The WebApplicationException log ID is [4698F300D2C40C2000000000000009AA]."
    This error occurs both when the file is processed successfully or when in error. In case of a positive test case file, we can even see the message reaching Pipeline (SXMB_MONI). But only the audit log does not show the processed steps in the channel monitoring and displays the above error message.
    We have even established that the cause of the error is Java Module (First, we executed by removing our custom Java Module from the module steps and the audit log showed the steps correctly. But by putting the module back in the channel, the error resumed).
    Initially, the error was not coming and we were able to test this properly. But over the time the audit log error started. Now, we are not able to get rid of this even by restarting the channel or restarting the Java stack of the server.
    To me, it seems like a memory issue in the Java Stack.
    Any thoughts?
    Can we find out where to find the details of the WebApplicationException log ID displayed above?
    Thanks,
    Sudheer

    Hello,
    This could be generic but may helo you:
    500 Internal Server Errors
    Description: The server encountered an unexpected condition which prevented it from fulfilling the request.
    Possible Tips: Have a look into SAP Notes u2013 804124, 807000
    Regards,
    Caio Cagnani

  • Lost Preview monitor in log & Transfer

    Hi,
    I'm logging footage in Log & Transfer and have lost my preview monitor. All footage is there.Can anyone help?
    Jeff

    Hi -
    Are you trying to import XDCam footage from a camera storage card? Log and Transfer is not the way to do it.
    You need to use Sony's XDCam transfer software to import the footage.
    Some of the clips show partial, because they are larger than the file size limit of the card, and the complete clip spans multiple individual files - if you use the Sony XDCam software, it will join the partial clips automatically.
    Unless I misunderstand what you are doing . . . .

  • Change default monitor linux uses BEFORE X is loaded

    i can't seem to find the answer for this. eveything talks about monitors in x
    --  i need to get linux to boot up on the VGA  while the TV plugged in via HDMI
    --  if tv is plugged in it boots up on the tv
    if i boot with only my VGA plugged in it's fine but if i boot up with my VGA and my TV (hdmi)
    my monitor switches over to the tv before i get the login prompt (x has not loaded yet).
    if i startx i loose the tv picture as well (now both screens are black)
    I have on-board ATI radeon HD7560D using xf86-video-ati driver (new install, never installed any other graphix drivers)
    thx in advance!
    Last edited by skinney6 (2013-05-30 19:12:31)

    this is from my kernel boot journal
    Radeon Display Connectors
    May 31 02:56:25 aries kernel: [drm] Connector 0:
    May 31 02:56:25 aries kernel: [drm]   HDMI-A-1
    May 31 02:56:25 aries kernel: [drm]   HPD1
    May 31 02:56:25 aries kernel: [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
    May 31 02:56:25 aries kernel: [drm]   Encoders:
    May 31 02:56:25 aries kernel: [drm]     DFP1: INTERNAL_UNIPHY2
    May 31 02:56:25 aries kernel: [drm] Connector 1:
    May 31 02:56:25 aries kernel: [drm]   VGA-1
    May 31 02:56:25 aries kernel: [drm]   HPD2
    May 31 02:56:25 aries kernel: [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
    May 31 02:56:25 aries kernel: [drm]   Encoders:
    May 31 02:56:25 aries kernel: [drm]     CRT1: INTERNAL_UNIPHY2
    May 31 02:56:25 aries kernel: [drm]     CRT1: NUTMEG
    May 31 02:56:25 aries kernel: [drm] Connector 2:
    May 31 02:56:25 aries kernel: [drm]   DP-1
    May 31 02:56:25 aries kernel: [drm]   HPD3
    May 31 02:56:25 aries kernel: [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
    May 31 02:56:25 aries kernel: [drm]   Encoders:
    May 31 02:56:25 aries kernel: [drm]     DFP2: INTERNAL_UNIPHY
    and this...
    kernel: fbcon: radeondrmfb (fb0) is primary device
    Last edited by skinney6 (2013-05-31 18:22:25)

  • How do "you" monitor event logs in SCOM 2012? Need opinions.

    Fairly new to SCOM. Do you monitor all event logs? Just warnings and critical? How do you filter out things you don't want to see?
    Looking for opinions here not just a "how-to".
    Thanks,

    Steps in creating a Event based Alerting Rule.
    1. Open the Operations Manager Console. 
    2. Go to Authoring. 
    3. Under Authoring - Management Pack Objects - Select Rules 
    4. Right click on Rules and select - Create a new rule 
    5. Select Alert Generating Rules - Event Based - NT Event Log (Alert) 
    6. On the same screen select your destination management pack and click Next 
    7. Give a name to your Rule and optionally give it a Description. 
    8. Rule Category can be anything you like. 
    9. Select the Rule Target as the class of your choice, normally it can be Windows Computer. 
    10. Make sure the Rule is Enabled and select Next. 
    11. Select the Event log name from where event will be monitored and click Next.  (for example Application or System
    or Security) 
    12. Build the Expression to filter the events with the below details: 
         a. Parameter Name = Event ID, Operator = Equals and Value = (any event id of your choice) 
         b. Parameter Name = Event Source, Operator = Equals and Value = (any source of your choice) (you
    may delete this filter if you want) 
         c. Click on Insert button at Top and it will put the cursor at Parameter Name, click square button
    with 3 dots [...] and it will popup another screen. 
         d. In that box, select the 3rd radio button named 'Use parameter name not specified above' and there
    manually type 'EventDescription' (without quotes) and click OK. 
         e. Then come back to filter screen, now here you will see Parameter Name = EventDescription, and
    for Operator select Contains and then for Value you can type any word you want to key on from the Event description. 
    13. After building the desired Expression, click Next. 
    14. Configure Alerts as you like and click the Create button.
    To get the Alerting event details. Go to Start menu and in Run window type eventvwr.
    And put the details on the wizard as per the below screenshot.
    Refer: http://blogs.technet.com/b/operationsmgr/archive/2008/11/12/opsmgr-2007-how-to-create-an-alert-rule-based-on-an-event-description.aspx
    Gautam.75801

  • Username, and password correct: BackBox Linux Logi...

    So I've been getting this on my system, and I've already tried cleaning out .Skype, reinstalling, I've tried Ubuntu Multiarch, and Debian 7 multiarch yet the same result, and it will let me log into skype via the website, but not on skype itself on my machine. I'm getting frusterated with this. And it is 4.3 which is the most recent update. But I'd like to use Linux while working with servers, etc.
    Best regards -Seth

    Same problem here - can't login with skype name with skype version 4.3.0.37.
    Before it worked fine (as long as I updated to the latest version...) but now it fails to login.
    Why?
    As far as I can tell there is no difference between now and the last time I logged in (last friday)

  • Monitoring Agents logged in, and out dialing notification to duty manager

    I've been asked to come up with a way to monitor a few critical skill groups for agents logged in and if there are none dial out to predetermined outside numbers that reach duty managers. When the call is answered a message should be played indicating there are no agents logged into their skill group.
    I figure I can write and Administrative script to keep track of the skill groups, which would then set a variable and kick off a routing script. However I'm stumped on how to play a message to them. Is this something the outbound dialer could be configured to do? Note this is strictly a proactive notification to the managers and I'm not planning to route the calls anywhere.
    Any ideas on how I might be able to do this?
    Best,
    Rob

    Hi Rob
    It might be tricky - I would probably try the following:
    - In your inbound script, check using the 'get reporting statistic' step for the number of agents in the CSQs (not the skill groups, as it's CSQ specific)
    - From that script, you could do a 'send email' to notify a supervisor.
    - Alternatively, you could use a 'send http request' to trigger another script, which would use a 'place call' and 'play prompt' routine to play out the notification. I would use a http request to trigger a seperate script, as if you do it from within the first script, the caller will be kept waiting while the system dials the supervisor and plays a prompt - the scripts cannot multitask.
    - The other problem you might have would be that multiple notifications may be generated. You might be able to work around that by setting a variable in a session to indicate the threshold being triggered, and another when it has been notified. When the condition is cleared you could clear both variables to allow a new trigger event.
    An easier option than scripting might be to use the 'Supervisor Workflow' feature. This isn't exactly what they have asked for, but allows a popup or audio alert to be triggered based on calls being in queue over x seconds, or length of a queue being x or greater. It's configured from within the Supervisor app.
    Regards
    Aaron HarrisonPrincipal Engineer at Logicalis UK
    Please rate helpful posts...

  • Trace JDBC driver operation - monitor and log pooling?

    hi there,
    i went through all the (FINEST, or TRACE:32 level) traces provided by logging code in ojdbc14_g.jar, but still didn't find any info which can be used for monitoring behaviour of DataSource Pooling and all the client-server SQL queries
    also something like in the second post in thread Re: OC4j Datasource logwrite not working will be welcome
    thanks in advance

    Please let us know your CLASSPATH settings. To make it work, ojdbc14_g.jar should be put before ojdbc14.jar in your CLASSPATH.

  • Monitoring Linux server with server stats

    Hi,
    I am planning to test our new application which will be hosted on Linux servers. When running my performance tests, I want to monitor the key metrics on these servers. I'm thinking CPU, Disk Space and Memory Available as a starting point. Can someone help me with how to monitor the Linux servers, and if these are the right metrics, as well as additional metrics that would be appropriate to monitor during tests?

    Jack,
    one way of monitoring your Linux system is to use the Virtual Agent monitors, they allow you to hockup to your linux/unix system via Telnet/SSH and to execute commands like for example vmstat to get metrics back during your testing.
    CPU, Disk and Memory are good starting points as allready mentiond in this thread...in addition you may wana add counters that are more "specific" to the server type you are running like for example counters that are usefull when running a Web server or an Application server.
    usefull counters might be:
    Web server
    *CPU Usage
    *Memory Usage
    *Hits/pages per second
    *Web process system utilization
    *Current connections
    *Disk swapping
    *Disk utilization
    Application Server:
    *CPU Usage
    *Memory Usage
    *Hits/pages per second
    *Request queue
    *Application Server process system utilization
    *Queue wait time
    *Disk swapping
    *Disk utilization
    hope that this helps
    /m

Maybe you are looking for

  • AWR Report - suggestions to improve performance.

    Hi Folks, Web application server version - 10.1.2.0.2 Database version - 10.1.0.4.0 OS version - AIX 5.3 WORKLOAD REPOSITORY report for DB Name         DB Id    Instance     Inst Num Release     Cluster Host xxxx      3419432639 xxxx            1 10.

  • Is it legal to subscribe podcast from itunes US if i am not  american?

    i kind of saw a term that said :"The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to

  • Problem in TECOing/Closing the process order.

    Hi PP Gurus, We're facing a problem when trying to TECO the process order and system is generating the error message Message no. BS013 (System status CRCR is active (ORD 1000xxxxxx)) We're using Browser based PI sheet here to process the order. If an

  • How do I get my contacts off of my old BB and onto my new iPhone?

    Alright I have a new iPhone finally. I have an old BB curve that has all my contacts. These contacts are not saved to the sim card. I was told you can do something with outlook or something else that will take all of my contacts names, numbers emails

  • BPC for NW Client SP08 Problem - Runtime Error

    Hello, I'm having issues after the installation process. When I try to execute the Client, the software is throwing me the following error: "Runtime Error - It is not possible to open the registry key "HKEY_LOCAL_MACHINE\SOFTWARE\OUTLOOKSOFT\50\CLIEN