Monitor Mixer Error!

When I try to preview my "program monitor" window, I get the following error:
Premiere Pro has encountered and error.
[..\..\Src\Audio\MonitorMixer.ccp-153]
It won't play my timeline to let me preview my work! I can open seperate clips in the source monitor, but not the program monitor. What has happened? It was working fine last week Thursday!
TIA
Dean

I encountered the same error after installing a 0404 E-MU adio card. Whenever I use it I get the same error. As a result I have had to revert back to my olde soundblaster card. No explanation. No solution. This is another one of those Premiere bugs which Adobe will probably never address as not enough people have it. I feel very frustrated because there's simply no explanation whatsover.

Similar Messages

Multiple Headphone / Monitor Mix

Just wondering how to get multiple headphone mixes?
Running 2 (soon to be 3) daisyied FirePod's. They each have what seems to be 8 ins and 2 outs. I'd like to be able to give a separate mix for each output (like a soundboard with 4+ monitor knobs on each track). Anyone know how to do this?

Thanks for your reply, and yes, I have the output selected in the channel strip.
I acutally did get it working last night right before I called it quits, but still am having one odd issue.
I set my channel strips up to send to the coreect outputs (backing track to mains, backing track with click to monitor mix), but the click kept jumping back to the main mix. I would set the output to monitors, but when the tracks would play the click track would suddenly play through the mains, and the drop-down output selector would read "Main"?????
I thought it was something at the Concert level, so I changed it there as well, but still no luck.
Haven't ruled out that some of this has something to do with my Mbox Pro settings, but I see nothing there that would be causing issues.
Ever heard of a output changing like that? This happened repeatedly, I kept chaninging it to monitors, it came chaning itself back....crazy.
Thanks again for the help!

Cue mix vs monitor mix

How do I create a separate cue mix vs a monitor mix in GB? I aggregated my Duet with the built-in output, so I ought to have 4 output channels to choose from for each track. I'd like to be able to remove the vox from output 3/4 (cue mix) while playing them in output 1/2 (monitor mix). But I don't see anyplace in a GB track to assign output channels. Does GB just spam all tracks to all output channels?

Logic reads GB files, but not the other way round. So you would have to export your midi tracks as a midi file and the audio tracks as single audio files and puzzle everything back together in GB.
However, if you have mastered Logic to an extent that you can record, play midi instruments and even assign different output mixes, I don't see a reason to go back to GB for mixing and mastering. There's nothing GB can do that you can't do (or even do better) in Logic.

Monitor input error

Moved recently and Gateway 3250S, reconnected monitor input error showed up on monitor. Computer doctor did virtual diagnostic and said it was the graphics card. Plus fan wasn't working. Sent specs to purchase return hp Pavilion 6000 pro.MXLO180WRK. Bought & set up the desktop yesterday 7/9/15 with appropriate chords. Turned monitor first, then cpu. Received same error message: Monitor input error. Monitor going to sleep. As per where I bought computer switched out chords and monitors. Still same error. Where purchased hp suggested I bring everything in and they'll do a diagnostic. That involves renting a car & finding the time.

The standard Blue & White G3 has a 15-pin 3-row connector that connects to most third-party monitors. So cable adapters should not be the issue here.
There are two places that hold onto the screen resolution. The first is the PRAM, backed up by the PRAM backup/clock battery. If you have had a power failure or pulled the main power plug, and are now having this trouble, that battery is the prime suspect. I suggest you open the side door on the Mac, find the tiny button nearest the battery, and press and hold it for a quarter minute. then allow at least 5 seconds to pass before you attempt to power up. If the symptoms change, consider replacing the battery.
The other place the display resolution is stored is in a Preference file. To accommodate an environment with multiple users on multiple computers, the display setting used after you log in is stored in:
Hard Drive / Users / your_id / Library / Preferences / By Host / com.apple.preference.displays.yourHWAddress.plist
If you can boot to a different software source such as a System CD, you can both bypass the bad value stored in that preference file and gain access to that preference file to move it to another location (which will inactivate it).

Audio Interface for monitoring, mixing 5.1 St Surround in FCP and Sd Tr Pro

I'm a fairly newbie with FCP and Sound Track Pro, and I am doing mostly long form, live event HDV recordings and editing. I'm about to start doing 5.1 Stereo Surround shooting and burning to Blu Ray. What do you recommend for an audio interface for my G4 PowerBook running Leopard w/2GB ram, to monitor/mix my 5.1 audio tracks in Sound Track Pro (since I can't monitor 5.1 in FCP?) I will likely be recording the tracks on the new Sound Devices 788T and inporting them into FCP and/or STP via firewire, but I need to monitor my mix before I burn to Blu Ray discs using Toast 10 and my LaCie BR burner.
Also has anyone found a way to use Bose 5.1 monitor speaker system? It would work fine for the BR player, but what about using with the Mac G4 PowerBook - do I need a digital audio - audio interface?

You'll need an audio-interface with at least 6 outputs. They should be connected to a surround processor or AV-Receiver with multichannel inputs. In line with your budget you could use M-Audio, Focusrite or Apogee products for that, they work with STP & Protools.
When monitoring, you cannot use the Bose system, because S/Pdif is for encoded audio only.

Cache monitoring shows error

Hi,
In the runtime workbench of XI3.0, my Cache monitoring gives error:
Communication Error.
Please advise.
Thanks & Regards,
Shobhit

Hi Shobhit,
There are two types ports being used
1. J2EE Port usally 50000
2. HTTP Port usally 8000
u can check the same using transaction SMICM->Shift+F1
>>1) In the RFC Dest INTEGRATION_DIRECTORY_HMI, what port shall I use. I am using 50000 (xi start page port). But somewhere I saw '8000'. Also im using user 'XIISUSER'.
Use J2EE Port (from ID URL)
2) in the SLD->Business System->Integration Server->What port shall I use. I am using '8000' here.
Use HTTP Port (from SMICM)
3) in SICF, sap->bc->ping service is tested as per the document. But should it be left activated too?
I checked this in my system it is not activated.
4) in SICF, sap->xi->cache. The anonymous logon data is empty. Is it all right?
I checked this in my system it is blank.
5) On going to the link: http://xi:5000/CPACache/refresh?mode=full , it asks for useid/pwd but is not accepting any of the uid/pwds and gives error: You are not authorized to view the requested resource.
I think you need to use XIDIRUSER for this..
hope this helps..
Regards
Anand

How to monitor Spool errors/Spool request in CCMS

Hi @ all,
I have configured our Solution Manager system to monitor the spool system in the CCMS environment. However I also want to monitor spool errors/spool request in the *CCMS. I have already search in SDN for a solution but couldn´t find any. Do you have any idea how I could monitor the spool errors in CCMS (like in the transaction SP01) ?
Kind regards
Thomas

Hi
Have you checked this [http://help.sap.com/saphelp_nw04/helpdata/en/18/2625c6fed011d18e410000e83dd9fc/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/18/2625c6fed011d18e410000e83dd9fc/content.htm]
[http://help.sap.com/saphelp_47x200/helpdata/en/34/658a3b15566262e10000000a11402f/frameset.htm|http://help.sap.com/saphelp_47x200/helpdata/en/34/658a3b15566262e10000000a11402f/frameset.htm]
Jansi

DTP - Monitor Entry - Error PSA

I have a routine in a transformation to create a monitor entry if a certain field errors out.
I still want all valid records to be updated in the DSO, but just want to show that there was a failure.
If I use the setting "Valid Records Update, Reporting Possible (Request Green), then the DTP loads to the DSO with a request status of Green, writes the errors to the error stack, but does not show any warnings or labels stating there are error PSA.
If I use the setting "Valid Records Update, No Reporting (Request Red), then the monitor will create an entry stating the error, will add the errors to the error stack, but will not set the request status to Green to allow activation.
How can I determine if there are errors (below a certain threshold set in error handling), yet still set the DSO Request status to green (similar to 3.5 error handling, allowing valid records to update, but showing in the monitor that there are error PSA)?
edit
Routine is:
*selecting SAP User ID from PEMP_105 into 0TCTUSERNM (USER).
select single /BIC/PUSERID into RESULT
    FROM /BIC/PPEMP_105
    WHERE /BIC/PEMP_105 = SOURCE_FIELDS-PERNR.
*This will create a monitor entry/error PSA for any records that are not
*present in PEMP_105.
IF RESULT IS INITIAL.
      MONITOR_REC-MSGID = 'RSM'.
      MONITOR_REC-MSGTY = 'E'.
      MONITOR_REC-MSGNO = '799'.
      MONITOR_REC-MSGV1 = 'No User ID present in PEMP_105 for Employee'.
      MONITOR_REC-MSGV2 = SOURCE_FIELDS-PERNR.
      APPEND MONITOR_REC to MONITOR.
to skip a record
      raise exception type CX_RSROUT_SKIP_RECORD.
ENDIF.
Edited by: Cote Adams on Apr 2, 2008 11:52 PM

Your guess is correct, but I don't want to have Operations have to look at the error stack every night to determine if there is an error. I want there to be a symbol or entry in the monitor to tell them there is an error. Just like 3.5, when there are errors (less than the max number of errors), the valid records pass, but the monitor status shows a different symbol.

Stumped on how to create a flexible monitoring mix for a four piece band

I am recording a four piece electric jazz group "live" in the studio (my garage). I run logic 8 on a 2.4 Ghz MBP with 4 Gb of ram. I have a Presonus FP10 which gives me 8 analogue ins & outs. I also have a cheap Behringer 4 channel h/p amp HA4700.
My question is: is there a way to create a monitor mix that is from within logic that is both flexible and usable. ie close to zero latency ?
I have set up 4 buses in the mixer that I can send signal to from each of the instruments (sax, keys, bass & rum submix) and assigned these to outputs 3-6 which i then run to the aux in on each channel of the h/p amp. This has worked but i am getting some latency.....how can i fix this......can i ? It's actually not too bad, but when i can=me to using the same set up to do some overdubbing later it was un-usable.
Any suggestions gratefully accepted!

Do you need to have 4 individual monitor mixes or can they all be the same for each player?
If you can get away with the same mix for each player, create a stereo aux track with a bus of your choice on the input and use outputs 3&4 from your interface to connect to the stereo input on your headphone pre amp.
I'm not sure why you are connecting your interface to the pre amp via an aux input? I would have thought that it should be hooked up straight into the stereo input.
Although you won't get individual monitor mixes this way, each player will have some freedom over what they are hearing via the controls on the headphone amp.

What can i use to send adat i/o to analog for creating monitor mixes

i can budget a tascam 1804 for a new recording project i have, but it only has stereo outs. which means the band and i have to share the stereo outs. i need to be able to use the adat out to a box that allows 8 outs analog to setup monitor mixes for the band. at least i am thinking i need to.
anyone got any ideas of a device that can do this?

thanks for the reply. but i am talking about a mobile device.
it seems that if i want to do this the 1804 is not going to work. as i would have to get another device to give it more outs.
i am aware of the 828 and the 896 neither of which i want to own. i have used the 828, and well as it is a good device i just don't want to own one.
i guess the rme fireface is going to have to be what i get. if i am to have to routing capability that i want.

Firewire Interface and Monitor Mix

We'll, I've read all I can, and settled on a M-Audio Fast Track Pro for my interface. I went with the USB, but the residual latency and weak pre-amps have me looking to return it and get something different. I will mainly be using it to record guitar, bass, drums, and vocals over some loops. Here are my needs:
-One XLR and one 1/4" input. (Two 1/4" inputs would be nice, for taking stereo feed from a mixer when recording drums).
-1/4 L/R outputs to feed powered monitors
-Headphone out (of course)
-Nice, powerful preamp. The Fast Track Pro has to be cranked to record vocals from a Beta 57a.
...and here's the big one.
-An ability to adjust the monitor mix between input and playback. I'm not sure how people get a good monitor mix when using an interface without this capability. I like this feature on the Fast Track Pro, but it comes with some latency. I imagine some of this can be attributed to it's USB design.
Any suggestions would be great. I know this has been beaten to death. Thank you.
Mike
MacBook Pro 2.33 Mac OS X (10.4.9)

Latency is rarely caused by use of usb. It is almost always computer side, hard drive being probably the big cause. Especially with laptop hard drives.
Also just because your 57 needs to be at 10 on the FT Pro and say 8 on another device doesn't mean the sound will be any different. But I have heard that the Fastracks don't have as much gain as other interfaces.
If your mixing playback plus dry input you shouldn't have any latency but if you are mixing playback and wet input then you could get latency.

IMPORT MONITOR JOBS ERROR IN ECC 6 INSTALLATION

WARNING 2014-12-18 23:54:18
Execution of the command "C:\Program Files\j2sdk1.4.2_13\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ORA -importDirs "E:\ECC EXPORT 1\EXPORT_51031897-1\EXP1;E:\EXPORT 2\51031897-2\EXP2;E:\EXPORT 3\51031897-3\EXP3;E:\EXPORT 4\51031897-4\EXP4;F:\EXPORT 5\51031897-5\EXP5;F:\EXPORT 5\51031897-5\EXP6;F:\EXPORT 5\51031897-5\EXP7;F:\EXPORT 5\51031897-5\EXP8;F:\EXPORT 5\51031897-5\EXP9;F:\EXPORT 5\51031897-5\EXP10;F:\EXPORT 5\51031897-5\EXP11" -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS" -orderBy "" -r3loadExe F:\usr\sap\AMC\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles yes -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -stop_on_error" -trace all -sapinst" finished with return code 103. Output: java version "1.4.2_13"Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)Import Monitor jobs: running 1, waiting 3, completed 68, failed 0, total 72.Import Monitor jobs: running 2, waiting 2, completed 68, failed 0, total 72.Import Monitor jobs: running 3, waiting 1, completed 68, failed 0, total 72.Loading of 'SAPAPPL1_14' import package: ERRORLoading of 'SAPAPPL2_2' import package: ERRORImport Monitor jobs: running 1, waiting 1, completed 68, failed 2, total 72.Import Monitor jobs: running 1, waiting 1, completed 68, failed 2, total 72.Loading of 'D010TAB' import package: ERRORImport Monitor jobs: running 0, waiting 1, completed 68, failed 3, total 72.
this is the error i'm getting
i started oracle instance through command prompt but in vain. only four jobs r not completing.
i checked virtual memory.
please help me out.
thanks
krish

Hi Krish,
Welcome to SDN.
The installation log files would help figure out the exact error.
In the below case, the log file SAPAPPL2_2.LOG might give more information. Let us if the logs have any errors mentioned.
Logs should be in the <OS drive>\Program Files\sapinst_instdir\.... folfer.
Regards,
Srikishan

Business Process Engine Error and Adapor Monitor JPR error in PI 7.0 Server

Hello,
I have installed PI7.0 Server on windows server. When I use SXMB_IFR tcode I got RWB screen and RWB Business Process Engine is in red. though I have configured automatic workflow customizing through SWF_XI_CUSTOMIZING tcode. Still i am getting BPE is showing Red.
The Second Error :
Adaptor Monitor area also I am getting JPR is in Red .
Could some one please help me what to done on my PI server and how to fix?
Regards,
Sankaranarayanan.G
SapBasisConsultant.

Hello,
Thanks for your reply. http://XIHost:Port/ProxyServer/jprselftest this url what is the Proxy server? Here I am accessing net through some script. I have maintained Business system also.
What to be done? SLD is working fine..
Regards,
Sankaranarayanan.G
SAP BASIS CONSULTANT.

Monitoring search errors in ALUI 6.1

Hi all ...
Our installation of ALUI 6.1 is experiencing some issues with the stability of the search service on a Win2003 server. Most of the time it's okay but on occasions the search status reports various errors such as "file_rename_failed" etc.. the search is still available but after a while search starts to fail and we need to run an examinarchive command line to recover.
This works and we can carry on as we were. The problem is that this relies on someone manually monitoring the status for when errors occur and it's not very practical. What we'd like to do is set up some sort of alert so the support team can be notified when errors first start to occur rather than when users start phoning in with complaints.
We can monitor the service tomake sure it is still up but the problem with this is that the search service can still show up as being running ok under service manager while these errors are occuring.
What I'm wondering is has anyone implemented a way of automating the monitoring of such search service errors so pre-emptive action can be taken at the first sign of trouble?
thanks in adcance
Simon

Some customers setup monitors using a 3rd party tool such as HP Sitescope that would monitor the log file, but this would be a larger effort and cost. You could write a script to do this as well, but I would recommend finding the root cause of the errors. It is not normal for this error to occur.
Be sure to take regular search checkpoints to ensure you can quickly restore if you need to. How often does this occur? Are you sure that antivirus or backup software on the server is not locking any files in the search folder?

How can I monitor application errors?

hi,
How can i monitor and where in one place both the technical errors and application errors.
for example , if i have File -> XI -> RFC
and the RFC has errors where can i see this errors in one place?

Hi Udi,
The report RSALERTPROC does not need to run to deliver RWB alerts. These alerts are pushed directly to the receiver. Only if you want escalation processes or if you want to forward CCMS alerts to the Alert Mgmt. you need to schedule RSALERTPROC.
From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
You'll find more information about trouble shooting the alerting in SAP Note 913858.
Also go thru these links:
Alerts not getting triggered from Adapter Framework
Alert Configs...
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Regards,
Abhy

Monitor Mixer Error!

Similar Messages

Maybe you are looking for