Monitor model (Desktop Monitor) was not loaded in the client resource explorer | SCCM 2012

Hi Everyone,
We have SCCM 2012 installed and configured. More than 2000+ computers have been installed SCCM client and manageable by SCCM server.
The inventory (Desktop Monitor) was not loaded in the client resource explorer (For some clients it got inventoried). Is there are possibilities that the Max file size might get exceeded the actual limit for the hardware inventory
which has to be increased in the registry?
Please provide us a solution.
Thanks in advance,
Iniyan G

See dataldr.log on the site server. It would show .mif files that exceeded the file size. InventoryAgent.logon the client might also help.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

HT203180 I purchased a video from iTunes but it will not sync to my iPod. I get a message stating that the video "was not loaded to the iPod because iyt cannot be played on this iPod." I tried to use the "create an iPod version" but the command is graye

I purchased a video from iTunes but it will not sync to my iPod. I get a message stating that the video "was not loaded to the iPod because iyt cannot be played on this iPod." I tried to use the "create an iPod version" but the command is grayed out

I was refering to the "sample rate", normally 44.1 KHz, the iPod might not be able to play tracks with a non-standard rate. Otherwise I'm not sure what the issue might be.
tt2

Desktop Manager Will not Load. Hangs on splash screen when loading, then crashes

My desktop manager is not loading, and hangs whenever it is attempted to load. I have done a clean uninstall, removed rim registry entries, and did a fresh download and install 3 times with full shut downs between each attempt. I am running Windows 7 service pack 1 with an HP Laptop. It is an HP Pavilion dv6 Notebook PC. Product Number LY080UA. I hope that is enough information, but I will give more if asked and informed how to gather such info.
When I right click on the Desktop Manager Icon, I choose to run as Admin. Once it loads the splash screen shows. After a little bit (4-6 seconds) a small Icon appears in my systems tab at the bottom right of my screen. This stays for a little while and then goes away. After this happens the Splash screen hangs, and get a black border around it. If I click on the Splash screen it grey out and says not responding, prompting windows to ask me if I want to wait for the program or close. If I choose to wait, it will sit there and do nothing. If I close it will prompt windows to "look for an error" but has not yet been able to return an answer.
When I log into safe mode, Desktop Manager loads, but does not work well as only a bare bones set of drivers are enabled. If I turn off all but the non-essential services off using services.msc it will load, but again the services needed for it to run and the services for windows to be fully functional are not on at all.
I have attempted to turn off all but the Desktop manager in the start up, using msconfig, but that does not help either.
I am at my wits end here, and would really like some help with this. It loads up (desktop manager) on my Desktop, but I am unable to log that mammoth box around with me while I travel.
Thank you for your time and efforts, I will be very grateful for any and all help.

I'm having the exact same problem here! I'm running Windows 7 Ultimate SP1 x64. Please help! This was posted a month ago.

I have an ipad 2 and just rented a movie. When I try to load the movie to the ipad it indicates that it was not copied to the ipad because it cannot be played on the ipad. How do I fix this?

I have an ipad 2 and just rented a movie. When I try to load the movie to the ipad it indicates that it was not copied to the ipad because it cannot be played on the ipad. How do I fix this?
P.S running software version 4.3.3

I have the same problem on an original iPad.

OXS server 3 with mavericks, it will not load up the assistant with open directory and will not allow me to use old open directory it was not a clean install just upgrade. any help or advise appreciated as i really need the server.

OXS server 3 with mavericks, it will not load up the assistant with open directory and will not allow me to use old opeopen directory and will not allow me to use old open directory it was not a clean install just upgrade. any help or advise appreciated as i really need the server.

I wonder if the disk being referred to is actually your iPod which is not plugged in. Maybe something has stuck thinking the iPod should be there.
Try completely removing all the iTunes related programs according to this method.
http://support.apple.com/kb/HT1923
Restart you PC and see if startup improves.
If it doesn't improve you need to consider the possibility that there is something else going on.
If The problem goes away, hopefully a fresh install will be OK.

[SOLVED] Many modules are not loaded in the Arch USB key installation.

Hello!
I installed Arch Linux on my USB key. I did it few months ago and it worked, I had portable arch.
Yesterday I decided to make a fresh installation. Unfortunately after booting it from my USB key
most of the modules were not loaded. Because of that I couldn't start the X server and connect to
the internet (ethernet card was not detected).
Even after loading the module which corresponds to my ethernet card manually (modprobe e1000e) it was not
displayed in the lsmod list.
I though "maybe I screwed something up during the installation?". To find out I used GParted to copy
my OS partition (perfectly working Arch Linux installed on the hard drive) to the USB key. Of course I changed the UUID of the USB partition.
After booting it I was suprised because the situation did not change - modules that are loaded on my main system for some
reason were not loaded on it's exact copy placed on the USB key.
I have no idea why my portable OS is acting like this.
Commands below were executed on another PC so don't look for the e1000e module.
$ lsmod
Module Size Used by
ext4 474699 2
crc16 1367 1 ext4
mbcache 6082 1 ext4
jbd2 83440 1 ext4
usb_storage 48007 2
ata_generic 3378 0
pata_acpi 3395 0
hid_generic 1161 0
usbhid 40577 0
hid 90742 2 hid_generic,usbhid
sr_mod 14898 0
cdrom 34848 1 sr_mod
sd_mod 30821 3
pata_atiixp 4819 0
ehci_pci 4000 0
ohci_pci 4040 0
ohci_hcd 23905 1 ohci_pci
ehci_hcd 59252 1 ehci_pci
usbcore 180104 6 usb_storage,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid
ahci 23056 0
libahci 21642 1 ahci
usb_common 1656 1 usbcore
libata 171112 5 ahci,pata_acpi,libahci,ata_generic,pata_atiixp
scsi_mod 130669 4 usb_storage,libata,sd_mod,sr_mod
nouveau 904702 0
button 4677 1 nouveau
video 11196 1 nouveau
mxm_wmi 1475 1 nouveau
wmi 8419 2 mxm_wmi,nouveau
i2c_algo_bit 5399 1 nouveau
drm_kms_helper 36254 1 nouveau
ttm 63507 1 nouveau
drm 238238 3 ttm,drm_kms_helper,nouveau
i2c_core 24164 4 drm,drm_kms_helper,i2c_algo_bit,nouveau
$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
$ lspci #Just a fragment
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
Subsystem: Gigabyte Technology Co., Ltd Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 10
I/O ports at de00 [size=256]
Memory at fdaff000 (64-bit, prefetchable) [size=4K]
Memory at fdaf8000 (64-bit, prefetchable) [size=16K]
[virtual] Expansion ROM at fda00000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
Capabilities: [cc] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 07-00-00-00-68-4c-e0-00
$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 331.38 (buildmeister@swio-display-x64-rhel04-15) Wed Jan 8 19:53:14 PST 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
$ cat /var/log/Xorg.0.log
[ 59.424]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 59.424] X Protocol Version 11, Revision 0
[ 59.424] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 59.424] Current Operating System: Linux sanguine 3.12.7-2-ARCH #1 SMP PREEMPT Sun Jan 12 13:09:09 CET 2014 x86_64
[ 59.425] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=2c39c1f9-de3e-4907-93dc-8b77422a07a1 rw
[ 59.425] Build Date: 09 January 2014 08:47:24AM
[ 59.425]
[ 59.425] Current version of pixman: 0.32.4
[ 59.425] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 59.425] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 59.425] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 13 12:55:56 2014
[ 59.433] (==) Using config file: "/etc/X11/xorg.conf"
[ 59.433] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 59.437] (==) ServerLayout "Layout0"
[ 59.437] (**) |-->Screen "Screen0" (0)
[ 59.437] (**) | |-->Monitor "Monitor0"
[ 59.441] (**) | |-->Device "Device0"
[ 59.441] (**) |-->Input Device "Keyboard0"
[ 59.441] (**) |-->Input Device "Mouse0"
[ 59.441] (==) Automatically adding devices
[ 59.441] (==) Automatically enabling devices
[ 59.441] (==) Automatically adding GPU devices
[ 59.456] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 59.456] Entry deleted from font path.
[ 59.456] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 59.456] Entry deleted from font path.
[ 59.457] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 59.457] Entry deleted from font path.
[ 59.457] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 59.457] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 59.457] Entry deleted from font path.
[ 59.457] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 59.457] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 59.457] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 59.457] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 59.457] (WW) Disabling Keyboard0
[ 59.457] (WW) Disabling Mouse0
[ 59.457] (II) Loader magic: 0x804c80
[ 59.457] (II) Module ABI versions:
[ 59.457] X.Org ANSI C Emulation: 0.4
[ 59.457] X.Org Video Driver: 15.0
[ 59.457] X.Org XInput driver : 20.0
[ 59.457] X.Org Server Extension : 8.0
[ 59.459] (--) PCI:*(0:1:5:0) 1002:796e:1458:d000 rev 0, Mem @ 0xd8000000/134217728, 0xfdfe0000/65536, 0xfde00000/1048576, I/O @ 0x0000ee00/256
[ 59.459] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 59.460] Initializing built-in extension Generic Event Extension
[ 59.460] Initializing built-in extension SHAPE
[ 59.460] Initializing built-in extension MIT-SHM
[ 59.460] Initializing built-in extension XInputExtension
[ 59.461] Initializing built-in extension XTEST
[ 59.461] Initializing built-in extension BIG-REQUESTS
[ 59.461] Initializing built-in extension SYNC
[ 59.461] Initializing built-in extension XKEYBOARD
[ 59.461] Initializing built-in extension XC-MISC
[ 59.461] Initializing built-in extension SECURITY
[ 59.461] Initializing built-in extension XINERAMA
[ 59.461] Initializing built-in extension XFIXES
[ 59.461] Initializing built-in extension RENDER
[ 59.461] Initializing built-in extension RANDR
[ 59.463] Initializing built-in extension COMPOSITE
[ 59.466] Initializing built-in extension DAMAGE
[ 59.468] Initializing built-in extension MIT-SCREEN-SAVER
[ 59.470] Initializing built-in extension DOUBLE-BUFFER
[ 59.472] Initializing built-in extension RECORD
[ 59.475] Initializing built-in extension DPMS
[ 59.477] Initializing built-in extension Present
[ 59.479] Initializing built-in extension DRI3
[ 59.481] Initializing built-in extension X-Resource
[ 59.483] Initializing built-in extension XVideo
[ 59.485] Initializing built-in extension XVideo-MotionCompensation
[ 59.487] Initializing built-in extension XFree86-VidModeExtension
[ 59.490] Initializing built-in extension XFree86-DGA
[ 59.492] Initializing built-in extension XFree86-DRI
[ 59.494] Initializing built-in extension DRI2
[ 59.494] (II) LoadModule: "glx"
[ 59.502] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 60.382] (II) Module glx: vendor="NVIDIA Corporation"
[ 60.388] compiled for 4.0.2, module version = 1.0.0
[ 60.388] Module class: X.Org Server Extension
[ 60.388] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
[ 60.401] Loading extension GLX
[ 60.401] (II) LoadModule: "nvidia"
[ 60.401] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 60.455] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 60.455] compiled for 4.0.2, module version = 1.0.0
[ 60.455] Module class: X.Org Video Driver
[ 60.462] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
[ 60.462] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 60.464] (++) using VT number 1
[ 60.464] (EE) No devices detected.
[ 60.464] (EE)
Fatal server error:
[ 60.464] (EE) no screens found(EE)
[ 60.464] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 60.464] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 60.465] (EE)
Last edited by Skitter (2014-02-16 20:57:21)

Please post the output of:
dmesg -c
modprobe e1000e
dmesg

Reporting (Project Publish) job is failing with 'The given key was not present in the dictionary'

I am using Project Server 2010 with SQL Server 2008 R2.
I have a PWA Instance which was running fine. I have a big number of projects and I do not keep site for all the projects as we do not need project site in our business.
Everything was running fine but during last few days, some of the jobs like Reporting (Project Publish) and Reporting (Project Delete) job is failing with the same error details for all the projects. I am not able to trace where the data is wrong/corrupt
and how to resolve it.
The error detail and ULS Log is given below anod I would appreciate if someone can guide me where the problem is and suggest me any solution.
QUEUE ERROR DETAIL:
General Reporting message processor failed:
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='4f36afe0-43dc-4143-befc-0452da416e69' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='071aeb7b-540e-45fa-b40b-a94a5d2e8e04' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='55445e77-51e3-40d8-a62f-e6db0b897444' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='3ab5a1ba-0915-45bb-a078-4b4b7c38af51' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='b27acd8f-6cde-47d4-bd53-5930e84dc940' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
ReportingProjectChangeMessageFailed (24006) - The given key was not present in the dictionary.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='b7250544-2a11-4887-8dcd-378b34b33ae1' QueueMessageBody='Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish'' Error='The given key was not present in the dictionary.'.
Queue:
GeneralQueueJobFailed (26000) - ReportingProjectPublish.ReportProjectPublishMessageEx. Details: id='26000' name='GeneralQueueJobFailed' uid='0706d212-f737-43ea-b694-c420488d57bb' JobUID='ca238fcf-d91b-46d6-a9c2-15f2cc35230d' ComputerName='WebSrv1' GroupType='ReportingProjectPublish'
MessageType='ReportProjectPublishMessageEx' MessageId='1' Stage=''. For more details, check the ULS logs on machine WebSrv1 for entries with JobUID ca238fcf-d91b-46d6-a9c2-15f2cc35230d.
ULS LOG:
Timestamp              Process
TID   Area                          Category
EventID Level     Message Correlation
01/19/2015 19:05:07.44 Microsoft.Office.Project.Server (0x1D30) 0x23FC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=117.485513497555 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:07.66 Microsoft.Office.Project.Server (0x1D30) 0x2C94 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=192.534598230475 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:08.16 Microsoft.Office.Project.Server (0x1D30) 0x1CFC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=448.362263674397 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:08.36 Microsoft.Office.Project.Server (0x1D30) 0x17E0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=162.22152253546 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.00 Microsoft.Office.Project.Server (0x1D30) 0x0898 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=557.699412860413 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.36 Microsoft.Office.Project.Server (0x1D30) 0x1F20 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=253.695754010613 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:09.67 Microsoft.Office.Project.Server (0x1D30) 0x0D68 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=239.76302803952 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:10.64 Microsoft.Office.Project.Server (0x1D30) 0x3324 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=973.469925841736 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:11.92 Microsoft.Office.Project.Server (0x1D30) 0x2DB8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=1275.5063556303 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:12.96 Microsoft.Office.Project.Server (0x1D30) 0x0A1C SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=1041.55499409959 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:13.15 Microsoft.Office.Project.Server (0x1D30) 0x0518 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=133.891034879385 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:13.35 Microsoft.Office.Project.Server (0x1D30) 0x14EC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_FULL_PUBLISH_DELETE). Execution Time=207.250205426327 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:14.69 Microsoft.Office.Project.Server (0x1D30) 0x10B4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_PUBLISH_PROJECT). Execution Time=267.137845971639 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:14.93 Microsoft.Office.Project.Server (0x1D30) 0x14E0 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureScalar -- MSP_PUBLISH_PROJECT). Execution Time=209.552772167485 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:16.10 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResultWithOutputParameters -- MSP_SRA_ValidateServerLevelSRA).
Execution Time=717.808222684698 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:16.67 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (FillTypedDataSet -- MSP_SRA_GetData). Execution Time=307.24482978413 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:17.58 Microsoft.Office.Project.Server (0x1D30) 0x2AB4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResultWithOutputParameters -- MSP_SRA_ValidateServerLevelSRA).
Execution Time=123.306566048297 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.12 Microsoft.Office.Project.Server (0x1D30) 0x25F4 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResult -- MSP_WEB_SP_QRY_CreateSavedTasksForProject). Execution
Time=111.699445284922 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.61 Microsoft.Office.Project.Server (0x1D30) 0x2AC8 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (ExecuteStoredProcedureNoResult -- MSP_WEB_SP_QRY_Statusing_BuildTaskHierarchy). Execution
Time=449.279962592357 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.79 Microsoft.Office.Project.Server (0x1D30) 0x26D0 Project Server Server-side Project Operations 8tci Monitorableser1 PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1,
PSI: [QUEUE] System.IO.FileNotFoundException: The site
http://epm.company.com/sites/Workspaces2/PROJECT_1 could not be found in the Web application SPWebApplication Name=SharePoint - 80.     at Microsoft.SharePoint.SPSite..ctor(SPFarm farm, Uri requestUri, Boolean contextSite, SPUserToken
userToken)     at Microsoft.SharePoint.SPSite..ctor(String requestUrl)     at Microsoft.Office.Project.Server.BusinessLayer.Project.OpenProjectWeb(Guid projectUid)     at Microsoft.Office.Project.Server.BusinessLayer.Project.SetPwsProperties(Guid
projectUid)     at Microsoft.Office.Project.Server.BusinessLayer.Queue.ProcessPublishMessage.ProcessMiscellaneousPublishMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:19.79 Microsoft.Office.Project.Server (0x1D30) 0x26D0 Project Server Server-side Project Operations 8tcj Monitorable PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1,
PSI: [QUEUE] MiscellaneousPublishMessage failed on project b95c52ba-bc00-4301-aab5-890d0b057c29 ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:27.42 Microsoft.Office.Project.Server (0x1D30) 0x3088 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:27.42 Microsoft.Office.Project.Server (0x1D30) 0x3088 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:28.47 Microsoft.Office.Project.Server (0x1D30) 0x31F8 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:28.47 Microsoft.Office.Project.Server (0x1D30) 0x31F8 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:29.51 Microsoft.Office.Project.Server (0x1D30) 0x2B00 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:29.51 Microsoft.Office.Project.Server (0x1D30) 0x2B00 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:30.56 Microsoft.Office.Project.Server (0x1D30) 0x1D20 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:30.56 Microsoft.Office.Project.Server (0x1D30) 0x1D20 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:31.60 Microsoft.Office.Project.Server (0x1D30) 0x2170 Project Server Reporting atwj Monitorable Error is: ReportingProjectChangeMessageFailed. Details: Attributes: Project UID='b95c52ba-bc00-4301-aab5-890d0b057c29'.
PublishType='ProjectPublish' The given key was not present in the dictionary. . Standard Information: PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d PWA Site URL:
http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:31.60 Microsoft.Office.Project.Server (0x1D30) 0x2170 Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:32.66 Microsoft.Office.Project.Server (0x1D30) 0x24DC Project Server Reporting atwj Critical Standard Information:PSI Entry Point:   Project User: Domain1\User1 Correlation Id: ae078058-f794-47ca-b1ad-0834f7a07f4d
PWA Site URL: http://epm.company.com/PWA SSP Name: SharedServices1_PsiServiceApplication PSError: ReportingProjectChangeMessageFailed (24006) RDS: The request to synchronize change(s) to project Project
UID='b95c52ba-bc00-4301-aab5-890d0b057c29'. PublishType='ProjectPublish' failed. Message: 'ReportingProjectChangeMessageFailed'. Message Body: The given key was not present in the dictionary. Error:(null) ae078058-f794-47ca-b1ad-0834f7a07f4d
01/19/2015 19:05:32.66 Microsoft.Office.Project.Server (0x1D30) 0x24DC Project Server Reporting atwr High PWA:http://epm.company.com/PWA, ServiceApp:SharedServices1_PsiServiceApplication, User:Domain1\User1, PSI: [RDS] ULS
Event: ReportingProjectChangeMessageFailed was associated with exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.     at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal.InitializeSprocParameterTypeData(Dictionary`2& routineParameterInfos)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.SubDal..ctor(DAL
dal, DataStoreEnum store)     at Microsoft.Office.Project.Server.DataAccessLayer.DAL.get_Reporting()     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.GetRefreshOperationStatus(MessageAreaType
messageArea)     at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.RDSBaseMessageProcessor.CheckIfAllowedToProceed(ReportingBaseMessage msg, MessageContext msgContext, Group messageGroup, JobTicket jobTicket)
at Microsoft.Office.Project.Server.BusinessLayer.ReportingLayer.ProjectPublishMessageProcessor.HandleMessage(Message msg, Group messageGroup, JobTicket jobTicket, MessageContext mContext) ae078058-f794-47ca-b1ad-0834f7a07f4d

Without seeing the history, one possibility might be some corruption in the reporting database. Assuming that you are following best practices for SQL DB management, and this is not a DB neglect problem, then I would try to force a refresh to see if that
helps. You can do this by executing a custom field backup and then restore. Note: Do not do this during production hours. Let us know if that provides any therapy.
Gary Chefetz, MCITP, MCP, MVP msProjectExperts
Project and Project ServerFAQs
Project Server Help BLOG

ATI Catalyst Control Center is not loading with the latest drivers. Help!!!

I have installed latest ATI drivers from Lenovo 8.712. After that ATI Catalyst Control Center is not loading. The icon is present, when I click display properties. But when I click it, nothing happens. How can I downgrade to the previous version?
And another question: I have a docking station and 2 monitors. One of the monitors with DVI connection is working fine. Is there any way to disable laptop screen and enable second monitor through analog D-SUB.
Thank you in advance.

Let me add. Already tried everything: battery is switched to High Performance, Windows XP service pack 3, T500

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion =1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and

After the most recent FF update, FF 3.6.6 will not load, citing the error message: "XULRunner / Error: Platform version '1.9.2.3' is not compatible with minVersion>=1.9.2.6 / maxVersion". Tried updating XULRunner with no luck. Downloaded fresh copy and installed. Still no luck.
== This happened ==
Every time Firefox opened
== FF updated to 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

file was not copied to the iPod because it cannot be played on this iPod

Hi,
   I'm a complete newb with the first generation iPod Touch. It's my wife's and I don't use it but I wanted to experiement with giving her access to some movies. As an experiment I've encoded 1 chapter of a movie on my Linux box using Handbrake using the iPhone & iPod Touch preset. The file is about 7MB. It plays fine on the Linux box. I've copied it over to my Windows machine, have my wife's iPod Touch hooked up and it's visible in iTunes. I select the video directory for the iPod in iTunes and then try dragging the video file into iTunes. At this point I'm presented the message:
<file> was not copied to the iPod <iPod name> because it cannot be played on this iPod.
   In searching the forums it seems that one potential solution is to choose Advanced->Create iPod or iPhone version which unfortunately is grayed out an unselectable. I suspect that this is because I don't have the video file inside of iTunes, but I'm not sure about that.
   When I choose Library->Movies I just get a few options about renting and downloading that take me to the iTunes store.
   How do I get this video into iTunes so that I can try to get it onto the iPod?
Thanks,
Mark

As a follow-up I talked to my son who has an iPod and he tells me that, assuming I understood him correctly, when I open iTunes and choose Library->Movies I should see something like a file browser, and that when I drag the video from my desktop into iTunes I should see it there in the browser.
I currently am not seeing anything that looks like a file browser, but something more like an adversitisement for capabilities of iTunes and the iTunes store. I've got a green shopping bag that has some text to the right saying 'Download movies' and to the right of that some green tickets to the right with text that says 'Rent movies'.
I understand that I want to use the iTunes converter in the advanced menu, but I haven't figured out how to use that on a random file like the m4v file on my desktop.
Thanks

Satellite L500 will not load past the 'welcome' screen

Hi,
My Toshiba Satellite L500 laptop will not load past the 'welcome' screen. The cursor thing just keeps going around and around but won't go to my desktop.
Last night it went into some temporary profile and it had a message saying 'your other profile cannot load at this time please try again later'
Any help would be greatly appreciated.
Thanks,
Kara

The error message is not known to me and also searching in google didnt get any hints.
Possibly your Windows OS is muddled up.
Did you try to boot Win 7 in safe mode?
Try this. Restart your notebook, tap the F8 key.
In advanced boot options choose the option called Safe Mode.
If the notebook does not allow booting in Safe Mode, try the option Last Good Known Configuration.
If this didnt help, try Repair my Computer. Here you can choose between different settings.
The one which could solve this is HDD recovery which helps you to set the notebook to factory settings. But this means also that your HDD would be formatted!
So be aware of this!

An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

Get this error when trying to install Logic patch 9.1.4 to my machine.
An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

Thx, but i had already read that and tried it: did not work.
Got it fixed now by reinstalling Logic Studio 9 from DVD.
That indeed creates the Logic Pro folder in Applications - something I had tried earlier by simply moving my existing Logic folder. This means the Logic 9.1.5 update does not simply check a folder name: there must be another entry/registry entry it checks. Reinstalling Logic Studio from scratch solved it for me.
After reinstalling thought Lion forgot my Focusrite Saffire 40, so no DAW. Solved that by reading a forum entry on beta drivers.
So I am happy, music creation wise.
Left for me is to solve the X Mail application saying it does not run under Lion!
Model Name:          Mac mini
Model Identifier:          Macmini3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.26 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          1.07 GHz

Error selecting a dimension member in BPC EPM report - The given key was not present in the dictionary

Hi,
We are currently running SAP BPC 10.1 NW on Hana
Version:
CPMBPC 810 SP 4
SAP_BW 740 SP 9
HANABPC 810 SP 4
EPM Excel Add-in 10 SP 21 .NET 4 build 9094.
On my embedded model. I have a BEX query on a aggregation level which I access in a report using the EPM Add-in Excel .
When I edit my report in EPM Add-in Excel , and I try to select the dimension members for a selected dimension member, I get the following error.
"The given key was not present in the dictionary"
Any assistance to help resolve the problem will be appreciated.
Regards
Gavin

Hi Shrikant,
I had a look at MBR_SEQ , it is a attribute on the dimension member in BW , this relates to a past version of BPC 7.5. We are currently on BPC 10.1 Embedded model , and the MBR_SEQ does not exist on any of the characteristics I have in my info cube.
When I create a web report I am able to access the dimension members using the select dimensions options, the problem seems to be on the EPM Add-in Excel client only.
Thanks
Gavin

The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.

try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true;
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
When i m run this part of code it throw an Ecxeption
Given Below is the Error..
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Bikky Kumar

try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true; ///Set it to false, or remove this line
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
Given Below is the Error.. The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Solution:
The error might occur due to following cases.
case 1: when the password is wrong
case 2: when you try to login from some App
case 3: when you try to login from the domain other than your time zone/domain/computer (This
is the case in most of scenarios when sending mail from code)
There is a solution for each
solution for case 1: Enter the correct password.
Recomended: solution for case 2: go to
security settings at the following link https://www.google.com/settings/security/lesssecureapps and
enable less secure apps . So that you will be able to login from all apps.
solution 1 for case 3: (This might be helpful) you need to review the activity. but reviewing the activity will not be helpful due to latest security
standards the link will not be useful. So try the below case.
solution 2 for case 3: If you have hosted your code somewhere on production server and if you have access to the production server, than take remote
desktop connection to the production server and try to login once from the browser of the production server. This will add exception for login to google and you will be allowed to login from code.
But what if you don't have access to the production server. try
the solution 3
solution 3 for case 3: You have to enable
login from other timezone / ip for your google account.
to do this follow the link https://g.co/allowaccess and
allow access by clicking the continue button.
And that's it. Here you go. Now you will be able to login from any of the computer and by any means of app to your google account.
Regards,
Nabeel Arif

ADMT 3.2 Group Migration - Include File error: The object was not found in the domain

Hello,
I have been digging for weeks and still no answer. I am trying to migrate Group across two domains and if I select the group, it works just fine. But I want to bulk-migrate groups. So I am going the Include-File route. when ever I load the file I get
the bulk of the groups processed but I get a dialogue box that states:
The following objects are either not found or do not meet selection requirement. No migration will be performed on these objects.
Then I get a list a group and the message states:
The object was not found in the domain "contoso.com"
Does any one know anything about this or how to fix it? I have compared the files with good/bad versions using ADSI edit and from its POV they look the same.

Hi,
Thanks for your post.
There is an attribute named "showInAdvancedViewOnly" which specifies whether the object is to be visible in the "Advanced" mode of user interfaces. This is to say, if the schema attribute "ShowInAdvanceViewOnly" is set to TRUE for any security principal
in AD, we would not be able to find that account or group while trying to migrate it except the simple ADUC search. Just as the issue you encountered.
Therefore, please enable the "Advanced" mode in Active Directory Users and Computers, and then check if the three groups could be migrated or not.
If anything unclear or you have any questions about this case, please feel free to let me know.
Thanks and I look forward to your reply.
Best regards,
Ann Zhu

Monitor model (Desktop Monitor) was not loaded in the client resource explorer | SCCM 2012

Similar Messages

Maybe you are looking for