Monitor not connecting to new MacBook Pro

HHi there,
i have a new MacBook pro with the hdmi output.
i Tried connecting this to the Mac by getting a dvi to hdmi cable.
the monitor was working fine with my old Mac (dvi to thunderbolt adapter) but for some reason my monitor does not like the new Mac.
any suggestions?
i Have attached the 2 to compare, sorry about the darkness...
thanks

Hi there samdemmyhardy,
You may find the troubleshooting steps fore external monitor issues in the article below helpful.
Apple computers: Troubleshooting issues with video on internal or external displays
-Griff W.

Similar Messages

Bigpond Wireless Broadband USB Modem not connecting in new Macbook Pro

Hi,
I have recently bought one of the latest Macbook Pros and used Migration Assistant to transfer data from my older Macbook. On the older laptop I used a Tesltra Bigpond 7.2 Wireless USB Modem and it connected and worked fine (using default settings and the telstra connection software), however after plugging it into the newer laptop it has been behaving srangely.
Initially it worked fine for about a day, then kept stating that 'The PPP serever could not be found' - I changed the network settings a bit, uninstalled and redownloaded the software and registered the computer. It worked again for about a day then stopped connecting again. Again, the software manager was uninstalled and reinstalled and again it worked for about a day; however it has stopped working completely now and refuses to even be found by the computer. To make it more complicating, it isnt the modem because it works fine in the old computer still!
I have a feeling it may have sonething to do with the APN address but I'm not 100% sure.
Any help to fix this would be greatly appreciated!! Thankyou in advance

Yes you are right it works fine outside your mac notebook. But it is incompatible once installed inside the system.
Simple do a google search for "WD blue series drives in mac notebooks" and see what comes up.
I am not lying to you about the problems. You have first hand knowledge that with some mac notebooks the WD blue drives don't work.
Catiee wrote:
But the WD HD works fine if I use it as an external drive.
WD blue is compatible according to the manufacturer's specifications.

Connect my new Macbook Pro with Mountain Lion to my HP PhotoSmart B210

How can I connect my new MacBook Pro with Mountain Lion to my hp b210 printer? My printer is about 1.5 years old and works wirelessly just fine with my PC. I just switched to mac. The printer is supposed to be airprint compatible according to HP. HP has no software drivers for me to download. Instead they say to use Mac Software Update to get the software. However, there are no updates when I try that. I have tried adding the printer manually using it's IP address and can print a test page, but when I try to print using an application on the Mac it cannot find the printer or says the printer is in use. Help!!!

Are you sure it has no usb port?
http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/18972-18972-238444-421635-410635-4 021933.html?dnr=1
Connectivity, standard
1 USB (2.0); 1 Wireless 802.11b/g/n
The usb cable you need looks like:

Adobe CS4 will not install on new macbook pro [was: pro]

Adobe CS4 will not install on new macbook pro. It is coming from my other macbook.

Install normally means running setup from the orginal discs or the downloadable trial version. If you are copying from a backup or another computer, that won't work.
Best advice is to download the CS4 trial, and have your serial number ready in order to convert the trial into a licensed version.
Get the trial here. Follow the instructions carefully or the download link won't work.
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

LR 5 not working on new Macbook Pro.

LR 5 not working on new Macbook Pro. Have tried 2 CC downloads, 5.6 licensed download and 5.5 licensed download, all result in the same thing. It comes up with basic screen but no panels and gives an error occurred when changing modules. Nothing I've tried seems to help. It also has says "get started with lightroom mobile at top left although it says it is Lr 5.6. Anybody else having problems? Calls to adobe result in no help and have to wait till Monday for some technical support. Surely this should run on a NEW laptop with no other software installed!!!

Install logs were fine. Application installed but wouldn't run properly. Finally got Adobe support and it turns out to be a file permissions error. Had to add both applications and myself as accessors of Lightroom folder under path ~/Library/Adobe/ and set permissions to read & write (was read only for everything but system) and apply to all enclosed folders. Runs fine now. Including this here in case anyone else runs across this issue.

YOUTUBE NOT WORKING ON NEW MACBOOK PRO

YOUTUBE NOT WORKING ON NEW MACBOOK PRO
Every time I want to see videos from youtube the video player just says "your browser does not currently recognize any of the video formats available".
Please help I have everything possible up to date.
Thanks!

It appears as if only some videos on YouTube will play using HTML5 and without Flash. For example, this video plays just fine for me and I do not have flash installed: http://www.youtube.com/watch?v=fxEWddT44BY
So, unfortunately, you will have to install flash or wait for YouTube to fix their website.
Also, one thing to try: When I had Flash installed and the "ClickToPlugin" Safari extension installed, YouTube would load all the movies in a simple HTML5 format. So no annotations or any other annoying stuff. Might be worth trying. You will have to install flash but, with the "ClickToPlugin" extension, you don't have to use Flash.

Samsung Omnia Mobile Phone does not connect to my MacBook Pro

Hi guys. I am after some advice please.
My Mac Book Pro is currently not allowing me to browse my Samsung Omnia phone by bluetooth.
It has worked previously however, it is not now. It recognises that the phone is there but when it comes to connecting it says "The connection failed or closed" - Would you like to attempt to reconnect or close this window?
I do not know how to get this to work and I cannot use the USB transfer wire as it is not compatible with Apple Macs.
I have some photos and files I would like to transfer over however, I cannot do so.
Any help much appreciated please.

Hi Elizaanne,
I understand you are having issues with HP Officejet 6700 Premium not connect to your Macbook Pro.
Sometimes the router needs to be cycled. I would unplug the router, turn off printer, turn off computer.
Turn back on router wait 5 min and turn on printer and computer.
Check on the printer if Wifi is SOLID.
From System Preferences, open Print and Fax or Print and Scan pane. If you see the printer listed
Click remove printer- button. It will ask for confirmation of delete printer.
Click the Add or + button, select the printer Bonjour Multifunction not Fax. Adding that should update the drivers.
If the Printer Wifi is not solid you will have to set it up again.
Press the Power button to turn on the printer.
Touch the Right Arrow to display the second navigation screen.
Touch Setup , and then touch Network .
Touch Wireless Setup Wizard
Then add it to you Mac 10.7.
I hope this helps.
Please feel free to contact me if you require further assistance.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

FireVault Encryption has paused and will not complete on new Macbook Pro. How do I get it to complete?

FireVault Encryption has paused and will not complete on new Macbook Pro. How do I get it to complete?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

My iphone 4s is not connecting with my macbook pro via blue tooth

my iphone 4s is not connecting with my macbook pro via blue tooth

Hi pogster,
Thank you for responding. Everything was working a short while ago. Apple tv, iPhone 4s and macbook pro on blue tooth and now nothing works. The assistant looks at the network as not there. but, the macbook pro works fine wit the blue printer??
Philippe Lepetit
[email protected]
La vie est belle.
(250) 744-4557

IMessage not working on new Macbook Pro.

iMessage not working on new Macbook Pro. Issue began after I downloaded latest version of Mountain Lion. After every message it says delivered then immediately a red circle with exclamation point says message not delivered. Any ideas?

I can also no longer text on my computer or iPad. Fine on iPhone. Same as you - I can see everything up until a specific day. But I didn't do any kind of update where it should have stopped. And it stopped working on my computer and iPad at the same time.

I've connected my external monitor (LG) to my new Macbook Pro 15" laptop, using the adaptor for VGA...the display now has a large black bar along the left side. No adjustment on the monitor will fix it, no "options" on System Prefs either...any ideas?

I've just purchased a new Macbook Pro, and connected it ot my external monitor (24" LG HD) using an Apple VGA adaptor. The only resolution that looks good is the 1920 x 1080, but the image does not entirely fill the screen. There is a large black gap on the left side of the screen now. It worked fine with my "last generation" Macbook Pro...no adjustment on the monitor will help, and cannot find any System Setting in displays such as "options" or widescreen setting. I've gone to the LG site, but no "Mac" related tech support issues come up...no forum here seems to deal with this particular issue either...any ideas?

I have the same thing but with a 23 inch HP, worked fine with my MBP 13 from 2009 but the 2011 2.4 i5 does the exact same thing as yours!
Very confused and hoping that some one else can help.
Thanks

External monitor connected to new MacBook Pro

I have a Samsung LED monitor connected to my brand new MacBook Pro with a mini display port adapter and a DVI-D dual link digital male to male HDTV cable. The external monitor flickers, cuts in and out and has static similar to an analog TV that can't find a signal. I'm wondering if it's the wrong kind of cable? Any help would be appreciated.

I have the same thing but with a 23 inch HP, worked fine with my MBP 13 from 2009 but the 2011 2.4 i5 does the exact same thing as yours!
Very confused and hoping that some one else can help.
Thanks

More DIsplay Problems on HPx2301 Monitor when connected to my MacBook Pro - OSX Snow Leopard

1) HP x2301 monitor
2) OSX 10.6.8 AND OSX 10,7
3) On-Screen Message "Monitor Going to Sleep"
I previously reported that the problems with my new monitor had been fixed with a change in DVI cable.
Unfortunately the fix lasted for one day. I powered off both the monitor and macbook, came back the next day and the monitor no longer detects the power book. Same is the case with an iMac and an old mac-mini. My external older Viewsonic (connected also via the same DVI cable) has no problems.
When the monitor is connected to the macbook, the macbook detects it and acts like it has dual screens - the System Preferences>Display app shows both monitors (and allows me to change resolution of the HP. Dispite this, the Monitor cannot detect a signal from the Mac.
Looks like a defective Monitor - will be contacting HP in the morning.
Also of note is that the included Documentation describes 6 control buttons on the base of the unit, including an Auto Adjust button for the user to " Press to activate the auto adjustment feature to optimize the screen image." Unfortunately, there are only 5 control buttons - there is no Auto Adjust button.
The documentation makes no mention of OSX, although it appears that drivers for the monitor have been included in the OSX distributions.

I'm back up - now using HP to mirror laptop screen. Got replacement DVI cable from HP, plugged it in an Monitor is working (again). So I have 3 seemingly identical cables - 2 supplied by HP, and one an older one I used with a Viewsonic DVI monitor.
1) The cable that shipped with the Monitor never worked,
2) The older cable worked for one day with the HP, then stopped working on the HP monitor, but worked with the older VIewsonic monitor,
3) The replacement cable from HP that is working currently.
I believe they are all DVI-i - pins appear to be identical on all three.
So I don't think its a settings or cable type issue. I suspect that the HP may have some circuitry that makes it very persnickity when it comes to signal detection - so perhaps there's some small variation is signal quality btween cables - not sure how to check that though.
We shall see if the cable 3 works for extended period.

HP Laserjet ProP1102 will not connect with my MacBook Pro

My new Macbook Pro with Yosemite will not print on this printer. It did do so a few days ago but not anymore. In wireless mode it will not communicate with the printer (or the printer will not communicate with it.) When connected with a wire the printer does not respond.
On my old MacPro with Mountain Lion it will print with a wire but not without.
There was a fleeting mysterious notice saying i needed a software update but I cannot find anything to this effect on the HP website.

Hi @DavidL1,
I read your post and see that you are unable to print by a USB or Wireless connection. I will certainly do my best to help you.
Make sure Safari is set as the default browser. (sometimes the EWS won't open if it isn't set as the default)
Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
Restore the printer's default wireless settings:
1. Turn the product off.
2. Press and hold the wireless button and the cancel button and then turn the product on.
3. Hold the buttons until the printer stops making noise, then release the buttons.
Print a a Configuration Page to make sure the IPv4 and SSID are cleared of the old settings.
Printing a Configuration Page.
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer..
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Follow this document to reconfigure the printer over the wireless network.
Setting Up the Printer for a Wireless Network for the HP LaserJet Pro P1102w Printer.
Under OS X v10.10 Yosemite, OS X v10.9 Mavericks and OS X v10.8 Mountain Lion select Method three: Wireless setup using a USB connection.
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

WD External Hard drive not working with new Macbook Pro

I have recently upgraded to a new Macbook Pro and when connecting a WD 1 TB Passport external hard drive, it doesn't appear on the MBP, but when I connect it to my old Macbook running 10.5.8, it appears normally. Is this a problem with formatting or an issue because it is USB 2.0...
Any help appreciated as I have a lot of data on the hard drive and would like to be able to use it with my new MBP.

I'm on Lion, with similar issues with two WD external HD. But what I found fixed the problem was to:
1. go to the manufacturer's website (in this case Western Digital),
2. locate my external HD, download the download.
For instance, I downloaded the WD Drive Utilities for Mac (for My Passport for Mac USB 3.0):
http://support.wdc.com/product/download.asp?groupid=219&sid=157&lang=en
Install the downloaded app.
3. Plug in external (this part, I think is important) directly into your tower or laptop (as opposed to through a USB multi-plug extender). Possibly this is because you access more power?
[I'm trying to remember in which order everything happened. But I think at this point the external hard drive mounted]
4. Install the software that is found on the external HD (in my case, it was a brand new device, so that had never been installed).
5. Run "WD Drive Utilities" and run diagnostics.
6. Test to see if it holds. Unmount the External HD. Unplug. Replug in and see if it mounts.
Note: I have not yet tested to see if plugging in the external somewhere other than directly into the tower also works. But I think the main problem is getting it to mount the first time and installing the software. That's what I think.

Monitor not connecting to new MacBook Pro

Similar Messages

Maybe you are looking for