Monitor on compaq presario sr2013wn not coming on

monitor on my presario SR 2013wn  not getting a signal is this a mother board issue

It could be a motherboard issue.  Has anything been done to it lately?  IE: downloading any updates or making any changes?  Can you veirfy that the monitor is turning on?  Do you have a video card installed or using onboard graphics.
BTW: If you did a BIOS update, then that could be the reason for no video.
Answer all of the questions, not just one or two.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Similar Messages

  • My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet.

    My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?

    Welcome to the support community group.
    First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
    Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
    First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop.  Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back  for 15 - 20 seconds while you reconnect it to power.  Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
    Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
    Then run the airport configuration utility from your laptop.  Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility.  Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
    Check back if you're still having problems.

  • How to install window xp in compaq presario cq60 not book

    how i install window xp in compaq presario cq60 in my not book! please help me, i have trouble with vista so please sir help me. i can't find cam driver, not work properly with .net. there ar so many problame so please help me please please..........

    There is a Guide for that here. 
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
    Yours is one of the moderate models and you will find links to all the drivers you need. My own take on this is you are going in the wrong direction. Instead of back to XP you should go forward to Windows 7, but XP can be made to work on that machine. Good luck and feel free to post back with any more questions. 

  • I am rajendra i have compaq presario v2000 note book now i reload os winxp audio drivers not instal

    Sir I am rajendra kumar I have compaq presario v2000 lap top I reinstal winxp os now I can't install audio drivers Please solve my problem

    I noticed this is your first post, a comprehensive post just for asking XP drivers.
    Please read XP downgrade guide, part 2, here
    Your model, somehow forgot to be listed in part 2, but in general, part 2 should work for your model.
    Read the guide so that you knew the advantages/disadvantages installing XP for your model.
    About your request, try the following drivers
    1.For Intel 965 Express Chipset Family, Here
    2.Conexant High-Definition SmartAudio 221 Driver
    Driver modded by silver here
    Unzip to a folder..use Device Manager,right click "Audio Device on HD",choose Update driver,
    No to connect,
    Install from a list or specific location,
    Select Don't Search, I will choose the driver to install,
    For the Hardware Type select 'Show All Devices'
    Remove the check from "Show Compatible Hardware" and click on "Have Disk".
    Next...browse to the unzipped folder and choose the "WiSVHe5.inf".
    Ignore XP when it complains.
    Reboot.
    Please post again If you found the mic and external speaker are not working perfectly.
    Post it with your Hardware ID. 
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • Compaq Presario CQ56 not turning on

    My Compaq Presario notebook isn't turning on properly. When I press the power button, the power light comes on and the wi-fi key light comes on red, but that's all. The screen doesn't come on. After killing the power once or twice, the computer starts up. I've done a complete system restore to factory condition, which I was going to do anyway. Does anyone know what it could be?

    Hi @TheBimmerGuy 
    Thank you for your query.
    I understand that on startup you get a blank or black display with no error messages, but the power button lights up and the WiFi light turns red.  If you power it off and on a couple of times it starts.
    Here is a link to HP Notebook PCs - Troubleshooting Black Screen Displays with No Error Messages During Startup or Boo... that should help.
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Loss of Sound, in monitor speakers, loss of HP software, W2007 monitor, SR5550F Compaq Presario

    A short time ago, our hard drive crashed, just beyond warranty.  The new drive was set up using Windows 7 (prior was Vista).  With the loss of data we also lost the basic HP care programs that were pre-installed.  Within this program is where according to the HP site, that I notify the CPU that sound is in the monitor speakers.  The Windows sound/display areas do not allow me to select sound in the monitor. 
    We have zero sound and the monitor OSD menu does not have the option to set it up either. 
    If I could get the HP program that allows this ( was it PC tools? Total care? ), then I could fix this I hope.  But it seems that I cannot get it from the HP site.
    Any suggestions?  anything at this point is appreciated... 

    Have you tried running Windows Update and installing all updates?
    (www.windowsupdate.com).
    Also try reinstalling the original software and drivers using the HP Tools on your PC (if they are still functional):
    http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&product=3292424&rule=39434&lang=en&do...
    "A riot is the language of the unheard." - Dr. Martin Luther King Jr.

  • Turned off volume on CQ1859s Monitor with Compaq Presario

    In trying to increase the poor volume of the inbuilt speakers on my CQ1859s monitor I pressed the button on the side and the volume disappeared completely.  Nothing else is muted and all the controls state that they are at 100% volume.  Please does anyone know how I can turn the sound back up?  Continuing to press the button on the monitor doesn't do anything and the pop up box doesn't accept the cursor.

    Try hold down the power button for 30-60 seconds. Then power the monitor on and go into the monitor's menu and do a factory reset.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Screen not working, Compaq Presario CQ62-215DX

    Hello,
    My Notebook screen is not working. My notebook boot up fine. the lights and the fan is working.  When I plug the external VGA to my lcd screen, it works fine. Only the notbook monitor is not working.
    which part in this case that needs to be changed?

    The display panel.
    http://www.ebay.com/itm/COMPAQ-PRESARIO-CQ62-215DX-LAPTOP-LCD-SCREEN-15-6-WXGA-/180579626928?pt=US_L...
    It is easier than you think to replace:
    http://www.youtube.com/watch?v=E0ggjZTRQhQ

  • All Ports/Plug​ins Do not work. Compaq Presario SR5233WM Desktop PC

    Hello,I am here today With a problem of Mine that I can't seem to fix on my own.I have the Compaq Presario SR5233WM Desktop PC And I have Not used it In about 10-12 months And I have finnaly turned it on to Try and use it for some stuff and I plugged it in the wall And It starts up normally no beeping sounds or nothing.So After I did that I plugged the Blue video cord into my PC and my monitor And Before this I rememberd My USB ports wouldnt work And I could not test them out again because my video did not seem to work,I had asked around and They said something about my Drivers Need Resseting? I kept on Getting different answers when I ask so I came here. So to sum everything Up. How do I reset my drivers Without Video And/or What is the problem and how to fix it with the ports not working..Thanks for your time.

    Hello again ZhayneW,
    Thank you for the updated information on your issue. I would like you to try the steps I am providing you below in order until your graphics return:
    Step 1. As you have tried different monitors I would like you to try different cables. The cables that go from your monitor to your computer could be the issue as well. According to the Compaq Presario SR5233WM Desktop PC Product Specifications page your computer has the IPILP-LC (Lancaster8) IPILP-LC (Lancaster8) and has following I/O ports with number 2 being a VGA connection and number 7 being the USB ports you state do not work. If you are using a VGA cord to connect your monitor to the computer that is the cord I would like to see replaced or swapped out with if possible. If you have already done this move on to the next step and ensure you let me know in your next post.
    Step 2. Turn off the computer and unplug the power cord and open it up and place your had on the power supply for about 30 seconds to drain any electrical charge you may be holding. Now on the motherboard on the front (opposite the I/O connection indicated above) left hand side you will see the following jumpers:
    These are the jumpers you need to use to clear the CMOS on your computer. Now on the off chance that your USB and Intergrated graphics have been disabled in the BIOS I am going to get you to clear the CMOS settings by moving the jumpers to look like the image below:
    Leave the jumpers in this position for about 10 seconds and then return them to their original position. Reassemble the computer and do not plug it in until it is totally back together. If this was successful your computer should boot up and your display should be back.
    Step 3. At this point the issue appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options. You could also go to a local computer repair and look to get it repaired as well.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Compaq Presario CQ5110F Monitor Flickers Intermittingly-Help?!?

    Hi,
    We purchased this hp computer with the Compaq Presario CQ511 monitor.   We took it back to the Office Depot to load up a brand new 2009 driver for the monitor to fix the flickering.  The flickering still continues.  The flickering begins after the computer warms up. Windows Vista is the operating system on the computer.
    What seems to be the problem?  Can anyone help?  
    Thanks in advance, Karen

    Karen, be sure to move any electrical devices as far from the monitor as possible.  This can cause it to flicker.  Check the cables to assure that the connections are secure.  Set the "Refresh rate" to the highest setting available for the "Resolution" that you are using.    
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • I cant access itunes storesMicrosoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002) Hewlett-Packard Compaq Presario CQ61 Notebook PC iTunes 10.6.0.40 QuickTime not available FairPlay 1.14.34 Apple Application Support 2.1.7 iPod Updater Libra

    i cant access to itunes store
    here is dignostic report
    Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
    Hewlett-Packard Compaq Presario CQ61 Notebook PC
    iTunes 10.6.0.40
    QuickTime not available
    FairPlay 1.14.34
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.1.1.4
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0025AE8C032360A0
    Current user is not an administrator.
    The current local date and time is 2012-03-27 13:06:24.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.6.0.40 is currently running.
    iTunesHelper 10.6.0.40 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {23DDA231-A7E0-409A-AB19-CEDE8ACE6359}
    Description:          speedinfo
    IP Address:          182.237.181.108
    Subnet Mask:          255.255.255.255
    Default Gateway:          0.0.0.0
    DHCP Enabled:          No
    DHCP Server:
    Lease Obtained:          Thu Jan 01 05:30:00 1970
    Lease Expires:          Thu Jan 01 05:30:00 1970
    DNS Servers:          202.177.240.125
                        202.177.240.251
    Adapter Name:          {948D9871-ADAF-4632-8D0C-538770929B52}
    Description:          Atheros AR5007 802.11b/g WiFi Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Thu Jan 01 05:30:00 1970
    Lease Expires:          Thu Jan 01 05:30:00 1970
    DNS Servers:
    Adapter Name:          {4D499748-069C-4E58-A116-DF748DA3912C}
    Description:          Realtek RTL8102E/8103E Family PCI-E Fast Ethernet NIC (NDIS 6.0)
    IP Address:          192.168.0.2
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.0.1
    DHCP Enabled:          No
    DHCP Server:
    Lease Obtained:          Thu Jan 01 05:30:00 1970
    Lease Expires:          Thu Jan 01 05:30:00 1970
    DNS Servers:          192.168.0.2
                        192.168.0.4
    Active Connection:          speedinfo
    Connected:          Yes
    Online:                    Yes
    Using Modem:          Yes
    Using LAN:          No
    Using Proxy:          No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    iTunes has never successfully accessed the iTunes Store.

    i cant access to itunes store
    Can you walk us through what happens when you try to connect to the Store, please?

  • Ethernet Controller - Driver not installed - Compaq Presario

    Hello, I am new here so be gentle
    I have just bought second hand a Compaq Presario 6240EA, motherboard is a Compaq 07D0h.
    In the hardware - device manager, it shows 'Other devices' - Ethernet Controller, with a large yellow question mark and exclamation mark.
    Details in properties show the following: drivers for this device are not installed (Code 28)
    PCI\VEN_10DE&DEV_01C3&SUBSYS_00A80E11&REV_C2\3&13C0B0C5&0&20
    I have search the HP and Compaq websites for driver downloads and have downloaded all the nVidia drivers available on the Compaq site, none of which improve the situation.
    Would there be somewhere else to look, I am at my wits end with this, any help would be much appreciated.
    Thank you in anticipation.
    This question was solved.
    View Solution.

    Please start your own thread rather than opening old ones back up. Also provide your full model number particularly when asking about hardware function which may involve drivers. We have to know precisely what hardware we are dealing with. Like the posts above, you may want to include the hardware id of the affected device.

  • Compaq presario a933tu dvd writer is not working properly

    compaq presario a933tu dvd writer is not working properly

    Hi,
    Please try this first:
       http://support.microsoft.com/mats/cd_dvd_drive_pro​blems/en-us
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Compaq Presario CQ61-424SA Laptop - eSATA/USB combo port does not allow eSATA connection

    Hi,
    I recently purchased an external HDD with eSATA connection for use with my Compaq Presario CQ61-424SA laptop.
    The specification on the laptop states it has a eSATA/USB combo port however there doesn't appear to be one. On closer inspection there is 2 USB ports on the right hand side of the laptop (which work fine with USB devices) and one on the left which is slightly wider than the other 2 (which also works fine with USB devices). However when trying to connect an eSATA cable to the port it does not fit and on closer inspection it does not look like the conventional eSATA/USB combo ports.
    Does anyone know if this laptop was spec'd incorrectly or does indeed have an eSATA/USB combo port.
    The cable I'm using was supplied with the external HDD I brought with connections as shown in this link.. http://www.comesource.com/storeweb/images/cable%20esata%20to%20esata.jpg
    Any help would be greatly appreciated!

    Hi, I am having the same problem with the "e-sata/usb shared port" , which does not look like a normal e-sata port, and the e-sata connector won't fit in it.
    Can anybody help us?

  • Compaq Presario CQ62 laptop does not see SD card

    I have a Compaq Presario CQ62 laptop (Windows 7 64bit) that has a built in media card reader that has never worked.
    When I insert the SD card it makes the "USB Beep Up sound" that says it sees the card - but when I go to MY COMPUTER, there is no device listed for the SD card.  How do I read and write to an SD card with this laptop?

    I have done that.
    In DEVICE MANAGER I can see the SD Card show up under "Disk Drives" when the SD card is inserted, and disappear when it is removed.
    Under Storage>Disk Management the SD card shows up as drive 1 (main drive is drive 0) but no drive letter. 
    When I right-click on the SD card Drive 1 and try to change to a drive letter, I get an error message and it will not let me.  It will not let me format either. 
    The driver is from microsoft and is old - 6/21/2006. I did some google searching and read that a driver update would fix the issue. I uninstalled the card reader driver, got a new driver from HP and installed it, and when I inserted the SD card it loaded up the old driver...ugh.

Maybe you are looking for

  • Continious data range algorithm

    I have in my database table 2 important date columns: StartDate (Not null) and EndDate(Allowed Null). I want to ensure that all records in the table would always create perfect contiues date ranges with no holes inside. Wor example there may not be r

  • Oracle 8.1.7.3 on Linux 7.2 linking problem.

    I am installing Oracle 8.1.7.3 on Linux. I successfully get the installer to run and can install Oracle. However, when I perform the link part of the install it fails. I am following the procedure of changing the compatibility libraries for Linux. I

  • Uploading/intergating Lightroom page to iweb / dotmac site

    Hello http://discussions.apple.com/thread.jspa?threadID=1318450&tstart=0 http://blogs.adobe.com/lightroomjournal/2007/03/how_do_you_upload_to_mac_dot_m_1.html http://discussions.apple.com/thread.jspa?threadID=1280597&tstart=0#6160586 All of these ans

  • Help, why did all my adobe products suddenly stopped working ????

    im a photoshop and indesign user, suddenly one day photoshop is freezing on open, and i cannot do any functions with it.... so eventually frustrated with it, i uninstall it and try to reinstall.  however, i open creative suite and it tells me i need

  • Array index out of bounds in oracle top links, jsf page

    Dear All, // This is my controller page // * To change this template, choose Tools | Templates * and open the template in the editor. package jsfpack; import db.Addressmaster; import db.Partymaster; import db.Propertymaster; import db.RealEstateJSFBe