Monitor on off button

The on-off button popped out. Tell me how to put it back in.

Hi 4715, I would need more information from you in order to better assist you. Could you please give me the model/product number on your monitor?
Here is a link to better help you locate the model/product number
Thank you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Monitor turns off, though by persistently pressing monitor on button it eventually functions

Model number p6-2128
Product number H2M96AA#ABC
Windows 8
Recently when I have tried to start up my computer, the monitor goes blank.
I have noticed when I press the monitor's on button twice that the monitor
will turn on for a fraction of a second and then return to being blank. When I continue
pressing the on button in this way for half an hour, the monitor will evenutally
remain on and I can use the computer without difficulty.
However, if the computer is left for a long period of time with the screensaver
showing on the monitor, then the monitor will shut-down again and I will
have to start pressing the on button repeatedly again.
There are no error messages, though when the monitor briefly flashes before
turning off a white box at near the top of the monitor reads:
Monitor Status
VGA Input: Active
DVI Input: No Input Signal
I have not made any recent changes to the computer, except perhaps there might have been some
downloads.
The problem seems to be getting worse and I am worried that my computer will soon no longer function
at all.
Please Help!

>How would I change the DVI input mode?
These ports are auto-sensing ...
*** Say 'Thanks' with Kudos ***

Desktop on off button blinks

I am in the process of setting up my new HP Desktop ENVY Phoenix. When I turned it off, the on off button blinks on and off as well as a red light 'strip' on thefront of the PC. The touch screen monitor has been powered off.
Is this normal.?

Hello alrprairie,
I understand you are inquiring about the flashing power and light bar on your HP ENVY Pheonix Desktop PC. It is completely normal when the computer is in sleep or hibernation mode for these lights to flast. The LED that lights the light bar on the front is actually wired directly to the power button and since the power button is on the top this is the computers way of letting you know it is still on just sleeping.
I hope I have answered your question to your statisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Satellite A200-1M8: monitor switches off and can't back to Vista

Hello,
I have Satellite A200-1M8 with original Vista. Sometimes I have some problems with dispaly (I have the newest drivers).
The monitor switches off (not as usually but it is grey instead of black) every application run smoothly (I hear music of movie playing) but I can't back to windows.
When I push button hibernation and I try to back to windows I see the blue screen then the computer resets.
It happens really often and is really frustrating because my internet disconnects and downloads.
I don't think that temperature is too high because I feel it is cool. How to repair this?
Maybe some graphic settings or new BIOS?
Please help me. I can't stand this!
null

Hello
Is your notebook preinstalled with delivered recovery image or you have installed your own operating system?
I have Satellite A200-1CR preinstalled with original Toshiba recovery DVD. I use the notebook pretty intensively every day but I have never noticed something like this. Since when have you noticed this strange behavior?

Can one monitor audio off the eos 70d?

I'm considerng the EOS 70D for some still and video work. Can one monitor audio off the EOS 70D while recording video?
thanks.
chuckcox
Solved!
Go to Solution.

Hi chuckcox!
Thanks for posting.
There is not a port on the EOS 70D that allows headphones to be connected for monitoring audio. However, the camera does have an HDMI port, which carries an audio signal. You can send the HDMI signal to an external monitor that does allow you to connect headphones and monitor the audio.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

MBP goes sleep mode when ext. monitor turns off

Hi, sorry I couldn't find the exact answer, so I opened up a new topic. My MBP is connected to an external monitor with HDMI and I am using MBP with lid closed. But when I turn off the monitor, MBP goes to sleep mode. Can I prevent this? I need to let MBP work while external monitor is turned off. I tried Insomnia software but couldn't make it.
Thanks.

I have exactly this issue. I closed the lid last night and woke this morning to a very hot machine. It had not entered sleep mode.
When you close the lid, my Macbook enters sleep mode for a few seconds, then the external monitor wakes up.
If you 'force' sleep by on/off button it seems OK. Help!
PS: Should have said all this happened after upgrade to Lion yesterday.

Monitor Turns off System Freeze

Hey everyone,
Unfortunately I am back with another problem. I had been running a very stable system with no problems for a very long time but recently my system developed a problem without any changes to hardware or software.
Randomly my monitor began to go into sleep mode (sometimes while running applications others while just running idle on the desktop). I would try and turn the monitor off and then back on again but it would go right back into the sleep state. The system would still be on (I dont know if it locked up or not, but i think it was). When I hit the reset button sometimes the monitor would come on and then would work fine for a boot or two before I would experience the problem again or the monitor would not start at all and the system hung in the boot process.
In a couple early instances I recieved an error message (in windows after a reboot) saying that there was a problem caused by my graphics card. So I swaped out the 6600gt with an older 16mb TNT2 with its older nvidia drivers. I am experiencing the same problems with that card.
also a couple times right as I restarted the computer after one of these problems I got a blue screen that said there was a problem and had to be restarted with more information but it always restarted before I could read any more of it.
Currently I removed one stick of ram to see if that has something to do with it.
Does anyone have an suggestions on how to go about fixing/diagnosing this problem?

Sorry Glenn, I should have read my own post. What I meant to say was that, I do NOT know how a bad monitor could cause boot problems.
After removing one stick of ram I have still experienced the problem. The monitor went black and the light on it went orange. If I unplug the monitor and plug it back in it turns on then goes right back into standby. I plugged in a very old monitor and was able to get a picture (although messed up from what I think is either a driver issue or a bad old monitor) but I was able to move the mouse around and open folders. So, the system does not freeze when the monitor shuts off. I then restarted the computer with the test monitor and it booted into windows fine. However, the computer then froze seconds later. I still had a picture however. I do not understand if this is a related issue (I am thinking yes). Nor do I understand what this all means. I am incapable of figuring out what in the world all of this could caused by. Do I try a new monitor? Is it the computer power supply? Even though the power supply is less than 6 months old. How could a monitor affect the system like this? If the power supply in the monitor was going bad why would it work for a couple days then have the problem then go back to working again?
UPDATE:
So, I turned my computer off to put back in the other stick of ram since that stick can't be the problem. When I tried to reboot the computer I immediately received a beep then another then another. One beep every 5 seconds. Additionally, only the number 1 light (top left) on the d-bracket was green. I reset the computer and got the same response. So i unplugged it for 15 seconds and then hit the power button and everything was fine.
This is very frustrating but, please someone help me! Thank you.

TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up

Dear apple, I am really dissapointed with you. Around January 2013, my iPhone 4s 16GB White has hardware issues, which was the Wi-Fi grey out. The wifi grey out means that I can't access the wifi on/off button, and also it has no connection. I have put up with it for months, until june 7 when I decided it has been long enough, and I got a replacement. I told the genius bar what happened, and I already did the so called "steps" that apple reccommended on the site, which was reset network settings, restore iPhone. The genius bar gave me a replacement phone, so I was expecting that the problem would be over, but it isn't. It seems that it's iOS 6.1.3 which is the case of most public complaints on apple iPhone products. Not even 3 weeks after I got the phone replaced, it is doing it again, so I suspect I'm just going to get a replacement again? Unfortunately I only have until 5th of july 2013 until my 1 year warranty is up. After that, any issue I have, I have to purchase apple care. People are expecting this problem to be fixed but I don't see it being solved any time soon. This is horrible and really low, because I have been a good customer, when I talk to the people at the genius bar, I show the utmost respect I can to them for the work they put into their job, but somewhere there is a problem where something has gone wrong. Because of that, people that only have a one year warranty (which i received because I purchased my apple iPhone at an Optus outlet, once that one year warranty is up, I have to pay for a problem that isn't even my fault? That isn't how it should work, you should be fixing this problem so people can be happy customers and leave happy. Obviously you don't all know how to do your jobs, because if you did, we wouldn't have this problem. I would like a replacement phone, ONCE AGAIN. If this problem occurs again, I will simply stop buying your products, and lose faith in your company, your's sincerely, Jack Maher.

This is a user to user help forum only. You are not addressing Apple here.
My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3.

Attempting to open Firefox freezes computer, requiring system shutdown via On/Off button. Opening FF in Safe Mode doesn't help anything.

I was using Firefox just fine as I have been for years, and when I tried to open it today after restarting the machine, it froze the computer almost completely (mouse works, but clicking it anywhere does nothing and ctrl + alt + del does not work). Sometimes even the mouse ceases to work. The only way to react to this is to shut down the system by cutting the energy (On/Off button) as I have waited up to 5 minutes and the system does not recover.
I have tried opening the Safe Mode dialog box (start -> run -> firefox -safe-mode) and choosing the options to disable extensions and toolbars and "reset user preferences to FF defaults" and click "apply and restart" and the computer freezes. If I hit the "continue with Safe Mode" button instead, I get to see the FF screen with a blank tab on it but the computer freezes as well.
I am completely baffled by this sudden problem. I am having to type this from Google Chrome and thus I cannot supply troubleshooting information, sadly. I am sure it is not conflict with antiviruses because I have not installed any new firewalls or antiviruses before the problem started.
I tried downloading Firefox 8.0 and installing it (was previously on 7.0) but it didn't help at all. I also tried running FF with Windows on Safe Mode, but the freeze still happens.
Please help me, my life depends on ReminderFox reminding me of stuff and now I can't access it :,-(. I need FF back ASAP!
Thanks a whole lot!
'''Addendum:''' The freeze is also happening at random even without opening Firefox, it has a chance of happening when I click something. My computer has frozen when I: 1- clicked the "reveal desktop" button to minimize all windows; 2- Attempted to close a tab in Chrome; 3- Clicked "play" in a Youtube video that had been loaded and waiting for some time). It will also almost always freeze when I leave it idle for more than about 10 minutes.
But it will '''guaranteedly''' freeze when trying to open FF, which doesn't happen with any other program.
I think my computer is breaking down. :(

'''Addendum:''' The freeze is also happening at random even without opening Firefox, it has a chance of happening when I click something. My computer has frozen when I: 1- clicked the "reveal desktop" button to minimize all windows; 2- Attempted to close a tab in Chrome; 3- Clicked "play" in a Youtube video that had been loaded and waiting for some time). It will also almost always freeze when I leave it idle for more than about 10 minutes.
But it will '''guaranteedly''' freeze when trying to open FF, which doesn't happen with any other program.
I think my computer is breaking down. :(

My home screen is gigantic. As a result I cannot see the keypad for entering in my passcode. Somehow, everything on my home screen has expanded to gigantic size. I've tried to reset the phone by holding the home button and the on off button...

My home screen is gigantic… So much so that 1/200 of the normal screen display now fills up the entire screen. As a result, I cannot even see my keypad to enter in my passcode. I've tried a hard reset a few times (holding the home button and the on off button at the same time until the iPhone restarts). This has not resulted in any changes. Any ideas?

Thank you Lawrence. that worked! I have another question for you as well. I just got this 6 Plus and it is already saying that I am nearing the end of my storage. My iCloud is apparently 20gb and I have 6gb left. I'm attaching a screen shot. Any thoughts on how I can make available some more storage?
I Also wanted to get an enhanced quality Speech voice Alex, but it is saying I don't have enough Memory (I think it says memory because I can't read the message fully). Lastly, in your opinion does Grayscale really improve battery life above and beyond what can be achieved by closing out all apps etc. Thank you.

Log off button in a web report (bw 3.5)

Hi,
I'm trying to add a log off button in my default web template, but it seems not working properly.
My web template, including simple query result, without user input variable :
<HTML>

<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="SET_DATA_PROVIDER"/>
 <param name="NAME" value="DATAPROVIDER_1"/>
 <param name="QUERY" value="ZTESTGC_QUERYLOGOFF"/>
 <param name="INFOCUBE" value="SUZ_C01"/>
 DATA_PROVIDER: DATAPROVIDER_1
</object>
<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="SET_PROPERTIES"/>
 <param name="TEMPLATE_ID" value="ZTESTGC_LOGOFF"/>
 <param name="STATELESS" value="X"/>
 <param name="USE_PAGE_WRAPPER" value="X"/>
 TEMPLATE PROPERTIES
</object>
<HEAD>
 <link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
</HEAD>
<BODY>
<A class=SAPBEXBtnStd title="Log Off" href ="<SAP_BW_URL CMD='LOG_OFF'>&sap-sessioncmd=cancel"> Log Off </A>
<object>
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="TABLE_1"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 ITEM: TABLE_1
</object>
</BODY>
</HTML>
When I click on my button, i'm redirected on a blank page but :
- if i click on the back browser (IE6) button, I see query results again, without see logon screen.
- if i stay on the blank page and i relaunch my web template using WAD button 'Execute in browser ...' it doesn't ask me my logon information
Why ???
Thanks to help me,
CG.

Hi,
try something like this:
button, which calls javascript function
function logoff()
// releases the current session and calls the log out page
SAPBWOpenURL(SAP_BW_URL_Get()+'&CMD=LOG_OFF&REDIRECT_URL=/sap/bw/Mime/Customer/WebApplications/htm_logoff.html');
it works correctly.If you press the button you will be at first loged off and after that redirected to htm_logoff.html (it is a simple html site, which you have to build)
Regards
Erwin
Edited by: Erwin Buda on Jan 9, 2009 3:31 PM

I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.

I have a Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power off button. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Any ideas?

I have a Power Mac G4 double mirrored model and everytime I shut it off it will not go on when I hit the power on/off button again. However, if I unplug and plug in the power cord it boots fine and everything is OK. The PMU and logic board have been reset. Sometimes my Mac goes on just by pressing the power on button but most times I have to pull the power cord and put it back in. Any ideas or help out there for this? Could it be a failing power supply? Apple Care says that this model is obsolete so there is no help from there. John
<E-mail Edited by Host>

Hi John,
That's often a sign of a bsad Capacitor in the Power Supply, but...
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

After upgrading to Yosemite my mac doesn't shut off. The off button doesn't work

After upgrading to Yosemite, my mac doesn't shut off. The off button no longer works. I want to shut the thing off.

Jehreth,
On my Macbook Pro you have to hold the power button down a moment till a little window pops up and asks what you would like to do. Also you can go to:
(  ) Menu > Shut down ...
to shutdown your Mac. Or are you saying that these options do not work?
Hope that helps,
Weston
Supporting article,
OS X Yosemite: Log out, sleep, restart, and shut down

Monitor on off button

Similar Messages

Maybe you are looking for