Monitor on timeline goes black...

Using the latest version of Premiere Pro, what causes the monitor to go black on the timeline?

FAQ: What information should I provide when asking a question on this forum?

Similar Messages

Premiere CS4 timeline goes black - refresh problem?

Every time I try to edit in premiere pro CS4, after a while (or straight away) the timeline goes black. Everything around the clips (not including the clips) goes black and I can see anything on the timeline except the clips. If I move the timeline off the screen and back on it refreshes normally? This problem in intermittent by persistent. I have done all the updates for premiere and my graphics card.
My system is:
OS: Win7 64Bit
Intel core i7 920
6GB Ram
ATI HD5770 1GB GDDR5
C drive is 200GB SATA1
Thanks

Hi,
I had an almost identical problem.
Windows 7 64bit
Premiere Pro CS4 4.2.1
Cineform neoscene
Nvidia GT240 (latest driver 257.21)
Premiere pro would work fine until I loaded up internet explorer, then the timeline would go black as soon as I dragged a clip around. I needed to completely log out of windows to get the timeline visible again after moving a clip.
I switched to firefox, but that had the same effect.
However I then tried the seamonkey browser and premiere now works fine!
Hope this helps.
Kerrin

My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. They will help you.
Best.

Program monitor freezes and goes black but I can still hear the audio

Hi just recently I've noticed after a few playbacks the program monitor goes black, the sequence plays out with audio, I just can't see the image. Timeline is mixed with prores, mts But haven't had this issue occur since updating.
THanks
I7 3970
gtx 780 tI
11TB raid 5

Hi,
Are you using CUDA for playback? Try changing the Mercury Playback Engine options and see if it helps.
Thanks,
Rameez

HP w1907 monitor - screen is going black

Please help! 2+ years new. I didn't make any recent changes. Monitor goes black after a few minutes. I tried without internet connected and still goes black.

Hi,
Press Menu button on front of the Monitor, choose Factory Reset with - and + Keys, press Select Button. If the issue persists, contact HP to have it replaced.
Thank You.
Kiran Talluri
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer "Accept as Solution" if it solves your issue

[SOLVED] Connecting extra Monitor, laptop screen goes black.

Whenever i connect a additional monitor through HDMI (my only output), the laptop screen goes black. If i do FN + external_monitor switch, then the laptop screen turns on but the external monitor turns off.
If you move the mouse you can feel that the desktop has been extended as i wanted, it is just that one of the screens keeps going black. The gnome display settings show both screens as active, the menu is so minimalistic that there is not much to do.
system
[cristobal@orion ~]$ uname -a
Linux orion 3.11.4-1-razer #1 SMP PREEMPT Tue Oct 8 12:31:50 CLST 2013 x86_64 GNU/Linux
As a side note, the custom kernel is almost identical to the original archlinux one, just that USB 3.0 module is disabled.
some packages
[cristobal@orion ~]$ pacman -Q nvidia-dkms bumblebee bbswitch-dkms nvidia-utils gnome-desktop
nvidia-dkms 325.15-2
bumblebee 3.2.1-3
bbswitch-dkms 0.7-1
nvidia-utils 325.15-1
gnome-desktop 1:3.10.0-1
Any ideas?
Last edited by labotsirc (2013-10-15 18:33:18)

The problem is now fixed,
For some weird reason, this time the gnome settings did work. Must have been some sort of rare bug that now i cannot reproduce.
Last edited by labotsirc (2013-10-15 18:32:53)

PP cs2 timeline goes black when i render

i created a project and sequence with avi files. the edit went smooth but when i rendered the timeline the video went black. audio was fine. also when i encoded it as a wmv it was fine.
i'm on vista 64. never had this problem before. do i need a special codec?

For starters, if the export comes out fine, I say don't worry too much about it. Rendering isn't required most of the time.
As to why this may be happening, where did you get the AVI files?

Display goes black

As of last night, my display on my Powerbook G4 is also not working properly. I unplugged my AC plug so I could take my laptop to another part of the house and the screen went blank. I thought it went to sleep so I toggled the track pad and some of the keys and nothing. I shut down and reboot several times to start my process of elimination. Here is what I found....The computer will not boot at all unless the wall plug is connected. My battery says it is fully charged though. When the computer is plugged into the wall, if I take the plug out of the computer, the screen goes black. Also if I plug in anything else in any of the other ports, like an external monitor, the screen goes black. When sometimes working with Photoshop CS2 or even Lightroom, the screen will go black and I have to reboot all over again.
Has this happened to anyone else?
Thanks in advance!

Sorry for my M.I.A. Status. The Apple guys have my computer and I have an old iBook I am using. I took the computer back to the Apple Store and had their "Geniuses" look at it. I was able to use the computer with only the new AC adapter I purchased online at MacWizards. My old battery would not charge off of the new plug and neither would the new Apple battery I bought.
The Apple guys diagnosed it as a logic board issue. Since I am not under Apple Care any more, they have a deal where I pay $350 US dollars and they send it to Apple and have anything and everything that is wrong with my computer fixed. They said I will have it back in 3-7 days. That is the option I went for. It is cheaper than buying a new computer...which I will still have to do in about 5 months, but this will do for now!
Hope this helps!

Program monitor keeps going black in Premiere Pro CC

PC - Premiere Pro CC - AMD Fire Pro (13.101-130604a-158071E-ATI)
I'm working on a project and the program monitor keeps going black in Premiere Pro CC while I am working on the timeline. I've got like 28 GB of memory alocated to the program and just updated the latest driver for my video card. No clue why this keeps happening, but the only way I can get around it is to restart. When I go to close down the program freezes and I have to shut it down in the system preferences.
Under a crazy deadline if you can help? Thanks

here's my story. I'm also having this problem with video appearing in the Program monitor. The only thing I did differently is that yesterday when I was editing, I pulled the Program monitor out of the main Premiere interface and dragged it over to my second desktop monitor. that worked just dandy.
when I opened Premiere today, and opened an entierly different project, there was no video in the output window (and it was locked back into the main interface). I also can't select clips on the TL. The software locks up, and I have to restart.
I am able to create a new project and render the countdown leader. I was also able to import the project that wasn't displaying correctly, and have it work just like normal. So I think I'm back in business for now.
I'm deeply concerned though. I'm doing a webinar about Premiere very soon (with rehearsals tomorrow!). A failure like this looks bad for everybody. Also, I don't relish having to re-import all of my old projects in this way to get the basics working again. Any idea what went wrong? Right now I feel like I'd better never drag the program window to a second monitor to enjoy a larger program monitor while editing.
Premiere Pro CS6 - Mighty Kilt
Win 7 home premium SP1 - 64 bit OS
Gateway dx4870
intel core i7-3779 @3.40GHz
16gigs ram
GeForce GTX560
driver 320.49 (just reinstalled to be sure)
I haven't installed any new software that I know of between the last time I edited with the Program on monitor #2 and right now.

Macbook Pro 2013 HDMI Monitor Goes Black for a few seconds

So I purchased a brand new Macbook Pro 2013 (specs below) and for the entire time I have been using it with a BenQ RL2455 via HDMI with no problems at all. Recently though I have started to experience problems between the computer and the monitor. There is no particular sequence as to when this will happen but the monitor screen just goes completely black for a couple of seconds, and then goes back to normal.
There is nothing to suggest that the monitor is being disconnected from the mac, as it still detects the fact that the two are still connected. I have followed each cable back to the source and they all seem to be properly connected.
As you can imagine, this is very annoying and inconvenient, and it would be much appreciated if anyone knows any solutions to this. I just thought i'd see if there was anything i could do before i contacted apple, just incase i was being a total idiot and missing something obvious!
Thanks!
Specs:
Macbook Pro Retina 2013
2.6GHz Intel Core i7
16GB Ram
1TB SSD

15" or 13"? How long have to had it?
I've noticed my HDMI monitor comes up blank on reboot sometimes. Using a late 2013 MBP Retina 13" for a couple of days now.

My Macbook pro 1,2 monitor and laptop screen goes black once in a while and then comes back on

Hello all,
Thank you very much for taking the time to view my issue. This issue just started about a month ago, I have a 22" LCD Monitor that I have been using, when this issue started the monitor would flicker and the screen would go black, but if I turned it off for a bit then turned it back on it would come back on. After a while it just started to go black and not come back on at all, so I decided to disconnect the monitor and use the notebook screen, I thought the monitor itself was broken. The notebook screen was working fine up until the last week, it is now doing the exact same thing, when my computer wakes up from being asleep it sometimes flickers then goes black, I can still faintly see the outline of the programs I have up but it is completely black. Sometimes it is a pain to get back on and I have to force shutdown and turn it back on to get it working. I am not sure what the problem is but I really want to get it fixed.
My Macbook Pro 1,2 is the first model made, but it was the best model available at the time. It has a Intel Core Duo 2.16GHz chip with 2GB of ram and a 160GB hard drive, it also has an ATI Radeon X1600 video card with 256mb of Vram. If anyone has any suggestions or resources I can use, I would greatly appreciate you sharing them with me.
Thank you very much in advance!
Sincerely,
Saggz.

Hey Fleurdemimi,
Thanks for the question. I understand you are experiencing issues with your iPhone 4s. Based on the information you have provided, restoring your iPhone in recovery mode may resolve your issue:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

MacBook Pro retina display goes black while outputting video through HDMI to external monitor??

I frequently connect my MacBook Pro to my 42inch Panasonic TV to watch movies/videos. I use VLC media player for all my playback. The problem I'm running into is that when I put VLC media player into fullscreen mode on my external display, my retina display goes black (I can still see the finder bar at the top and when I mouse down the dock appears but the rest of the display shows all black. If I click on Safari it will open but I can't see it on my MacBook display unless I take the external display out of fullscreen mode.
I would still like to be able to do things on my MacBook while video is playing. I've played around with the display settings but they're pretty limited and I can't figure out how to get it to work the way I'd like. I've seen people having up to 3 or 4 displays hooked up, I'm just trying to hookup one. I would consider this a severe limitation of OS X if I'm not able to separately manage the displays. Hopefully there is a setting or something I'm just not seeing. Thanks.

Yeah, fullscreen mode still doesn't play nice with multiple monitors. The common workaround is to stretch the window out to the edges of the screen instead of using actual fullscreen mode.

External Monitor with iTunes - iMac screen goes black

I have an iMac with iTunes 7.7/Leopard and an external VGA monitor (I use the standard Apple mini-DVI to VGA converter) then I use the external monitor to watch video from my iTunes library.
All works well - I have my desktop spread over both monitors, I fire up a movie from iTunes, move the video window across to the external monitor and everything is good - I can watch the video on the external monitor whilst continuing to work on my Mac - the iMac screen displays the Mac desktop as normal.
However, if I put the movie into fullscreen mode (view -> fullscreen on the iTunes menu), the external monitor displays the movie in fullscreen mode as it should, however the iMac monitor goes black.
The only way to fix this is to exit fullscreen mode and go back to one of the view options (rg fit to screen).
Any ideas how I can have my external monitor in fullscreen mode and have my desktop back?
Many thanks
SM

I have an iMac with iTunes 7.7/Leopard and an external VGA monitor (I use the standard Apple mini-DVI to VGA converter) then I use the external monitor to watch video from my iTunes library.
All works well - I have my desktop spread over both monitors, I fire up a movie from iTunes, move the video window across to the external monitor and everything is good - I can watch the video on the external monitor whilst continuing to work on my Mac - the iMac screen displays the Mac desktop as normal.
However, if I put the movie into fullscreen mode (view -> fullscreen on the iTunes menu), the external monitor displays the movie in fullscreen mode as it should, however the iMac monitor goes black.
The only way to fix this is to exit fullscreen mode and go back to one of the view options (rg fit to screen).
Any ideas how I can have my external monitor in fullscreen mode and have my desktop back?
Many thanks
SM

HT3131 Clamshell mode not working even after powering off and reconnecting display; external monitor goes black anyway

After connecting an external monitor (non-Mac) to my MacBook (Mac OSX 10.6.6) w/proper adaptor, setting up to use clamshell mode as per manual, the external still goes black even after putting MacBook to sleep, disconnecting and reconnecting external and powering up again as suggested in Support. Displays are set to Mirror. Also, when I open Displays in System preferences, 2 different windows for Resolution settings appear. Where have I gone wrong? This monitor (Viewsonic) came with it's own software for setup on a Windows PC, but of course it is not being used on the MacBook.
Any help would be appreciated!

Hi Mike,
Yes I followed all the procedueres....except for waking the computer using a keyboard click. For obvious reasons one is just inclined to open the top of the MacBook to wake it when the external goes dark...I did that twice, until I realized that very last step was needed to 'wake' it. It worked. Something so simple, easy to overlook I guess.
I did leave the monitors mirrored, fyi, if I don't then all I can access from the external are the resolution settings. This Viewsonic comes pre-loaded with Windows software of it's own and doesn't quite behanve the way my previous external did, but I got it figured out.
Thanks for your response, tho!

Imac 27" Intel Core 7 CPU. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware scan and all is fine. Did clean wipe from Mavrick back

Imac 27" Intel Core7 CPU 16 Gig RAM. Screen goes black and will not respond except with a push of power button. Second monitor connected via displayport continues to display fine. Apply Store did full hardware diagnostic and all is fine. Did clean wipe from Mavrick back to Mountain Lion but problem remains. Apple Store can do no more.

I did some more digging, it appears to be a backlight problem only. I can see the screen very dimly if I use a bright flashlight in a very dark room. It also seems to run ok if the brightness is turned down a LOT.
So I'm thinking this is a LED driver board issue or the display itself. I'll open it up and check the connection between the two and see if I can get any more clues. At least I can use it somewhat now by dimming the display significantly...

Monitor on timeline goes black...

Similar Messages

Maybe you are looking for