Monitor on Windows w/ Apache?

Hello,
Is it possible to install GW Monitor on a Windows 2000 Server with Apache,
not IIS? I have one such server that I have been trying to install monitor
onto. I get the "GroupWise Monitor Install" window to pop up for a second,
but then the install exits. I have the newest Novell client installed, but
I do not have IIS installed on this server, just Apache. I'd really like
to avoid installing IIS if at all possible. I see that Monitor works on
NetWare with Apache, but they don't list Apache with Windows.
Timothy M. Musa
Community Consolidated School District 93
Carol Stream, IL
http://www.ccsd93.com/

Tim Musa wrote:
> Hello,
>
> Is it possible to install GW Monitor on a Windows 2000 Server with Apache,
> not IIS? I have one such server that I have been trying to install monitor
> onto. I get the "GroupWise Monitor Install" window to pop up for a second,
> but then the install exits. I have the newest Novell client installed, but
> I do not have IIS installed on this server, just Apache. I'd really like
> to avoid installing IIS if at all possible. I see that Monitor works on
> NetWare with Apache, but they don't list Apache with Windows.
I assume you're referring to the Monitor *application*, yes? You can
definitely install it on Apache on Windows, but it needs Tomcat as well,
and is a completely "manual" installation (manual meaning you unpack the
various archives to their correct location on the server, then edit the
various config files by hand.)
That said, are you sure you even *need* the Monitor application? What I
mean is, there are two web interfaces into Monitor: one is an embedded
HTTP server within Monitor agent itself, the other is the "monitor
application" that runs on a web server, and communicates with the
monitor agent.
In years past the web interface to the monitor agent left a lot to be
desired, so many preferred the monitor application, even though it is an
extra layer of complexity to set up. But as of GW7 the monitor agent now
runs on Linux, and consequently they had to put all the "cool stuff"
that used to be exposed only via the monitor agent on windows into the
web interface of the agent.
So, that's just a long way of asking if you're sure you need the monitor
application at all? Try hitting the monitor agent's web server and see
if it gives you the stats/control you need.
Jim
NSC Sysop

Similar Messages

No signal on monitor after Windows 8 logo

I have a Lenovo H430-2558-1ZU desktop running Windows 8 Pro with Media Center. It orignally came with Windows 7. I was using it then all of a sudden the video went dead and I got no signal on the monitor. I restarted and after the Windows 8 logo, I get No Signal on the monitor. Windows 8 is running because I can hear sounds from the speakers. After using this method, I booted into safe mode. I uninstalled the Intel HD Graphics driver from safe mode and restarted in normal mode. It was fine for a few minutes, but then I got no signal on the monitor. So I booted into safe mode again and uninstalled the driver. I installed a new driver from intel's website, but I still have the same problem. I tried to uninstall the monitor driver, but still have the same issue. The monitor is connected to the computer's HDMI port via an XtremeMac HDMI to DVI cable. The monitor is a Viewsonic VX1945wm I've used for many years. I don't think this is a hardware problem, because my Ubuntu install works just fine. I'm at a loss here, IDK what to do. Please help!
Solved!
Go to Solution.

Hi seagdude,
Welcome to Lenovo Community Forums!
I’m sorry to hear that monitor is displaying blank screen with “No Signal” error message even after re-installing the Graphic drivers the issue is same and the H430 is not working as expected in Safe Mode as well.
This seems to be compatibility issue with Windows 8 and as driver re-installation is done and the issue still persists, re-install the Operating System will resolve the issue using the Windows 7 recovery disc that is made when the computer had pre-installed Operating System in it.
NOTE: Please backup the data before performing OKR as the computer will be re-installed to its factory settings.
If recovery discs are not created, please contact our Telephone Support team for the further information, I’m sure they will be a great help.
NOTE: I have private messaged you Contact details of TFN(Toll Free Number).
Do post back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Access Denied Error Opens when Installing HP Monitor Software (Windows 7)

im getting the following error trying to upgrade my screen driver.
"Access Denied Error Opens when Installing HP Monitor Software (Windows 7)"
I found this error in the help area but it doesnt address the problem, it simply describes the device manager instalation procedure, which I am using , and which results in the error.

Hi debgibson,
What is the monitor model number and what is the PC model number?
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Touchscreen monitors for Windows 8 ?

I have a hp desktop and monitor and was wondering if HP will be releasing a touchscreen monitor for windows 8. They did a TS monitor afew years ago but discontinued it.
If windows 8 if designed more for this hands-on approach, i would think all manufacturers would start producing touchscreen monitors. I understand you can buy all-in-ones, but not everyone wants or has one of these.

Currently, HP and many other manufacturers have touch screen monitors for sale. Support for Windows 8 should be native in many cases or require a driver download when available.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

SCOM 2012 Monitoring of windows based service

Hi,
Here my requiremt is to monitoring windows based service in scom 2012. The agent server is a windows based machine and I need to monitor these service, once they are in stopped state or in starting state. The server state is ahowing healthy.
Could someone pls guide me or share me the details for configure a wondows based service in scom for monitoring.
Below is the service i want to monitor through scom 2012
Thanks
Regards, Rajeev Parambil

Hi,
Please follow the steps below:
1. Under Authoring console, right click Monitors, then choose create a Monitor, select Unit monitor.
2. With the Create a Unit Monitor Wizard, we select Basic Service Monitor under Windows Services.
3. Choose the destinaton management pack to store the monitor. Click Next.
4. Specify the monitor name, and choose Monitor target class, such as Windows Operation System. Click Next.
5. Then select Service that you want to monitor, we can specify the computer name, and then find the service under the computer. Click Next.
6. Configure Health and Configure Alert.
Regards,
Yan Li
Regards, Yan Li

How to Open Two Excel Files in Multiple Monitors in Windows 7

How to open two excel files in two excel windows using multiple monitors in Windows 7.
Currently it opens multiple files on top of each other on the same one monitor.
I found this article in a blog it says
"The snap feature that you are looking for will not work unless you open two instances of Excel. This is because Excel Unlike Word is not a True SDI Application. Microsoft is aware of the Issue however there is no resolution to the problem but the workaround"

If you are working almost the entire day in front of your computer at your office with lots of Excel Sheets and Word, then probably you might be working with a
dual monitor or may be even more than that. Studies have shown that having an additional monitor increases the productivity by 20 to 30 percent (Source: NY Times)
But some applications like MS Office Excel, even though you open multiple files, they are all from the same instance of the application. So if you want to compare two
Excel
files, then you may not be able to have it in two
separate monitors as the files are loaded using the same instance of Excel. If you move one
Excel
file to the other window, the other Excel files are also moved to the other window.
So how to have two separate Excel files or other application side by side in dual monitors?
Option A:
In Excel 2003, go to Tools -> Options ->
General tab.
Make sure the option, ‘Ignore other applications’ is checked. Now all the Excel files will be opened as separate instance and you can move the Excel files individually across the monitors.
In Excel 2007, Click the Office button ->
Excel Options -> Advanced.
Under General, check ‘Ignore other applications that use Dynamic Data Exchange’.
or
As this method forces each Excel file as a separate instance, the memory consumption will be more. If you don’t want too many memory consumption then you can open only two instances (see
Option B) and manage wisely to view in both the monitors.
Note: If you are having issues like Excel opens without displaying a workbook, then you may have to
uncheck this option. (See Microsoft Help for more details on this). You can use option B in this case. I have this option checked and I have not faced any issue yet.
Option B:
They key here is, the application has to be loaded as separate instances. Lets say you have opened an Excel file in
Monitor 1 and you want to open the next excel file in Monitor 2. You can usually open another instance of Excel by browsing through the
Start Menu -> Programs -> Microsoft Office ->
Excel. Make sure this newly opened Excel file is the last Excel file you had viewed and then double click on the Excel file that you wanted to open. This will force the Excel to
open
in the second instance of Excel. Now you can move these
two excel files separately across windows or monitors.
This may be little cumbersome way to open new instances of Excel every time. The easy solution would be to keep these links in the
quick links near the Start button. So, every time you want to open a new instance of the application, you can just use those quick links.
hope work thanks
http://www.lytebyte.com/2008/05/13/how-to-open-two-excel-files-side-by-side-in-separate-monitors/

SNMP Monitoring the Windows Server using Netscaler

I am trying to monitor the Windows Server 2008 R2 using the SNMP on the Netscaler. To acheive this, I would need the SNMP OID which Windows Server Understands to be configured on Netscaler. Unfortunately, whatever OID 's i am using there is a response saying
nosuchname or nosuchresource.
Please help me with this. Thanks in advance.

I guess that SNMP should be allowed to both, read and write. Double check your configuration.
Rgds
Milos

How to adjust the brightness of an apple monitor from Windows 7?

how to adjust the brightness of an apple monitor from Windows 7?

In Windows 7 go to help display brightness or help power saving.

Monitoring Microsoft Windows 2008 Active Directory by a remoted Agent

Oracle documentation (E14542-01) said that for remote Agent monitoring with default settings, Grid Control can monitor only the Active Directory associated with the primary domain controller.
But for Microsoft Windows 2008 Active Directory primary domain doesn't exist anymore, can we use a remote Agent to monitor Microsoft Windows 2008 Active Directory ?
Thanks
Dominik

Dominik wrote:
Oracle documentation (E14542-01) said that for remote Agent monitoring with default settings, Grid Control can monitor only the Active Directory associated with the primary domain controller.
But for Microsoft Windows 2008 Active Directory primary domain doesn't exist anymore, can we use a remote Agent to monitor Microsoft Windows 2008 Active Directory ?I think , you can monitor it . Please check :
Oracle Enterprise Manager Grid Control Certification Checker [ID 412431.1]
How to Install the Microsoft Active Directory Plugin for Grid Control R2 [ID 359621.1]
Regards
Rajesh

MSI RX9250-TD128 Problem: Jumbled video at top of monitor after windows starts

I'm trying to intsall my new MSI radeon 9250 128MB video card in my year 2000 vintage Dell dimension 750 series desktop.
I've tried installing all of the drivers provided on the driver cd and I keep getting the problem of a jumbled bar of video displayed at the very top of my monitor once Windows starts up i.e. once display would go to 1600X1400 or whatever.
I am able to boot up in safe mode.
About my computer:
Windows 2000 professional
750 MHz pentium iii processor
340 mb ram
an AGP slot that fits the card (im not sure what type, anyone know how i can check if it is 2x 4x 8x?, i don't think this is the problem though because it is supposed to be compatible with 4x)
note: when i open up the device manager and go under display adapters, radeon 9200 series.. the "general" tab says that there is no driver installed. However, when I look under the driver tab, it lists the driver that is installed and the various driver files that are installed.
another note: in the device manager there are two display adapters, "radeon 9250" and "radeon 9250 (secondary)" i tried turning the secondary off and it didn't solve the problem
Also, is there an MSI technical support email that works? I've tried emailing [email protected] from two different email accounts and I'm getting it returned.
Thank you

Quote
Also, is there an MSI technical support email that works? I've tried emailing [email protected] from two different email accounts and I'm getting it returned.
http://support.msi.com.tw

Using Mac OS on multiple monitor is great, but after removing external monitor (2nd monitor) usually windows position originally on the external monitor doesn't get re-positioned to default monitor. Is there any shortcut key or utilities that can reset wi

Using Mac OS on multiple monitor is great, but after removing external monitor (2nd monitor) usually windows position originally on the external monitor doesn't get re-positioned to default monitor. Is there any shortcut key or utilities that can reset wi

Got the "apple firewire ntsc" choice to show up even if grayed out and "missing" under "audio/visual" menus by recreating choices in Easy Setup under "final cut pro" MENU thank GOODNESS because I was reading horror stories on here about this under another thread with someone trashing preferences, reinstalling and the works and still not getting it to show up...on my search now for an analog/digital converter up at b&h...find it odd that the s video connector wouldn't show the crt monitor when I put both displays through the 3870...I switched it back to see if it worked again when only the one dell monitor display was there and there it is again mirroring the screen display on my desktop...just can't be seen as an "external monitor" in fcp...couldn't find anything specific in the shane ross threads to this. I'm sad the program doesn't just see the s video connection though the 3870 though my computer does fine and will query up at b&h in regard to what might be affordable as far as a digital/analog converter. It's also weird in itself that when I put the two dell monitors on the one card my computer no longer could see the s video crt connection...makes no sense. Will report in later as to what I discover up at b&h as I'm sure there's a world of people out there using this sony crt monitor still even into the upgrades with computers and software so I imagine therein lies the solution. Thanks again and I'll report in as to what hardware might be suggested for me.

Sharepoint 2013 monitoring on windows server 2012

Hi,
Can we monitor sharepoint 2013 installed on windows server 2012 from scom 2007 R2 CU5??
Thanks
Ashish

Hi,
Yes, SCOM 2007 R2 support SharePoint 2013 Management Pack.
http://www.microsoft.com/en-us/download/details.aspx?id=35590
Niki Han
TechNet Community Support

Imac as external monitor for windows Notebook

Hi,
I want to switch from my Windows Pc to a mac for private use.
I prefer the new iMac (2011) 21,5" but I could not get an definite answer (not even in my local apple store) if it is possible to connect an existing Notebook (with VGA Mini-d-sub or DVI connector) to the new iMac in order to use the iMac as an external monitor for the Notebook.
I definitely need this for my business work in my home-office so this information is vital.
If ist is not possible I have to take the macMini and stay with my standard monitor.
Can please someone tell me if it is possible at all and if so, how it can be done.
I searched the internet and only found out that it was possible with the older 27" model but no information for the 2011 21,5" so please help!
Thank you in advance for your Support.
Celindir

Hi,
Sorry to say, but ...
The 2011 iMacs (21.5" and 27") can only be used as a second display via a Thunderbolt-to-Thunderbolt cable.
The 2009 and 2010 27" iMacs can be used as a second display via a DisplayPort connection.
http://support.apple.com/kb/TS3775 andhttp://docs.info.apple.com/article.html?path=Thunderbolt/10.6/en/30822.html
Stefan

How To edit Display ID/Monitor ID or erase Display ID/Monitor ID Windows 7

Hi !
Started a tread in the other "answers microsoft forum" bur got redirected here hence they thought that this was a developer-question...
My original Thread:
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/how-to-edit-display-idmonitor-id-or-erase-display/62eeace8-358c-4d65-8609-a3df7c3ac216?rtAction=1425277245844
question:
Have a problem that appears sometimes.
Setting up workstations at work with multiple Display-Monitors, its part of my job...
The Actual ID that the monitors get from Windows is usually not a problem, most programs can adapt to the windows settings and everything is fine.
BUT some of the systems we run sends commands and stuff to based on the actual number of the display, the number that appears on the screen when clicking the "identify button" in the desktop/display-settings from control-panel.
Lets call it the HardWare-ID of the Display
the computer, or windows remember display´s EDID and stores the monitors that has been connected in a list ?
If I installed the monitors/displays in correct order everything is good and works like we want it to.
So it happens that a display brakes or switch place for some reason, or maybe a driver-upgrade resets the display-list and windows now initiates the monitors in the wrong order.
the monitor that 1 want to have HW-ID 1 now has HW-ID 2, and everything is wrong, messages and commands now end up on the wrong display.
We have 3 options.
1 - Fix the display HW-ID
2 - Re-Configure the system and all that that includes, and hope that it wont change back at the next display-switch or driver-upgrade.
3 - re-install windows and hope that the displays get the correct ID and the continue with customer applications and so on.
I have found out that this is being stored somewhere in REG-Edit, but cant find the correct place
Having talked to HP, they don't support this kind of things... it must be a windows-problem, try with a clean install..... c-mon I switched a display !!
Tried clean driver-installs from AMD and Nvidia for the graphics cards, worked one time, until I rebooted the machine, the back to square one...
Then they ponited at Microsoft.
Having talked to Microsoft Support they dont support this kind of things....
I dont have the skills, but I cant se a problem with a scrips that deletes the reg-edit EDID list after a reboot ?
then it wouldnt be so complicated, simply:
unplug all but the display that you wan to be number 1
run script
reboot
plug in display 2 and so on ?
clearification:
Hi !
The question remains.
Not sure you guys understand my problem, doesent seem so...
I have the need to sweep the computers display-memory
The Application we are using is sending the commands to to logical screen number, not primary or secondary screen.
So It is Vital that I can decide or edit the logical numbers of the displays/screens
It doesent help me at all to switch sides in controlpanel och swtich witch is primary screen for desktop.
the application still sends the commands to teh logical numbers, and we dont want to reconfigure that if we changed a display that was faulty.
So:
I Need to disconnect displays så that I only have one connected
sweep the display-memory that is on the computer so that the disconnect monitor becomes number 2 when I reconnect it, if I dont get this memory swiped windows remembers the display and gives it the old number again.
can anyone help me `?
NOT connected to any Domain.
I realy cant understand how hard it can be to swipe the hardware ID of the displays and start over without having to to a clead install of windows !!

Hi Bobbyco57,
i've deleted my iCloud's mail ID in my iPhone 4 successfully so i've mentioned steps to delete iCould mail ID as below:
1. Select Settings icon.
2. Select iColud icon.
3. Click on Delete Account.
4. Enter new Apple ID and Password.
5. Click on Agree.
Thanks and Regards,
Suresh Balakrishnan

SCOM monitoring on windows services in starting or stopping state

Hi,
Any chance if somebody can help me to set alarm on stopping and starting state windows services (automatic services) in SCOM for client servers.
Balys

1) Using Windows Service Template to create a windows service monitor with enabled "monitor only automatic service" option
2) Export the management pack containing the monitor which created in step 1)
3) Modidy data source from
TypeID="Windows!Microsoft.Windows.Win32ServiceInformationProviderWithClassSnapshotDataMapper">
    <ComputerName>$Target/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
    <ServiceName>XXXX</ServiceName>
into
TypeID="Windows!Microsoft.Windows.WmiProviderWithClassSnapshotDataMapper">
    <NameSpace>root\cimv2</NameSpace>
    <Query>select * from win32_service </Query>
AND
<Setting>
          <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/ServiceProcessName$</Name>
          <Value>$Data/Property[@Name='BinaryPathName']$</Value>
        </Setting>
into
<Setting>
          <Name>$MPElement[Name="MicrosoftSystemCenterNTServiceLibrary!Microsoft.SystemCenter.NTService"]/ServiceProcessName$</Name>
          <Value>$Data/Property[@Name='PathName']$</Value>
        </Setting>
4) Import the management pack
http://blogs.technet.com/b/brianwren/archive/2008/03/07/using-wildcards-with-the-windows-service-template.aspx
Roger

Monitor on Windows w/ Apache?

Similar Messages

Maybe you are looking for