Monitor out in Demo

Hey, i'm a AE user like many of you on this board. For fun I downloaded the Shake demo and I am running through the tuts tonight. I also wanted to see if it would output through my Aurora video card to my monitor but I can't seem to get it to work.
My gut feeling is that this is a limitation of the demo to avoid people outputing video with a demo or is there a way to do it?
Thanks,
-Lars

Don't know about the demo, but with the full version, you have to select monitor # 3 (or #2 if you only have one monitor), then make sure that the aurora is set to some sort of desktop mode (I use a Kona2).

Similar Messages

Equium A100-306 Is the monitor out on the side the same as a DVI out?

Hello i was wondering is the monitor out on the side of my laptop the same as a DVI output? I am looking to connect my laptop to my hd tv, what is the best way? Can i use some sort of HDMI cable? Like a DVI to HDMI cable? Or is there a special cable for this?
When i try to use the svhs cable the screen is in black and white. Do i need to change any settings to rectify this?
Can anyone help please?
Thanks in advance.

Why to HDMI? Why is this HDMI port so important to you? Your notebook has S-Video port and this port is for Video transfer to external device like the TV. The same situation is on my Tecra notebook
You have three possibilities to connect your notebook to the TV:
- using S-Video cable
- using chinch adapter http://www.nikomp.com.pl/opisy/AY000/AYVCW12N.jpg
- or using SCART adaptor http://www.lenexpo-electronics.com/e_italy/i/AdattatoreScartSVHS.jpg
It is important to enable the right port on the TV. Please note that on this way only the picture will be sent to your TV. If you want to send the sound you must use adaptor like http://ecommerce.intermediae.it/images/07628G.jpg and connect sound cable to the TV. Because of that I recommend you to use SCART adaptor and you can connect all cables there (video and audio).
I have tested it with my BRAVIA LCD TV and it works well.

Monitor Out - Qosmio X300-12S

I have a Qosmio X300-12S and I want to use my monitor out and use it into my TV.
I don't have an HDMI TV, so can't use that output.
I have bought a Monitor out to Composite/Scart but can't get it to work. I have tried going into the NVidia Control Panel and forcing rigorous detection, but with no luck.
Can anyone give me any clues?
Thanks!

Hi,
Thanks for your replies - my laptop only has a DVI / Monitor Out and a HDMI out.
Not sure what you mean by enabling the right port on my TV. I have plugged the composite cable into the sockets, and I tried a S-Video cable, but had no luck with either of them.
I don't really want to buy a HDTV so that I can watch things (although I'd like one, just don't want to pay for it!!!), but I feel like I'm having less choice as the time ticks on.
Thanks again...

How to get out of demo mode on ipad2

how to get out of demo mode on ipad2

Did you erase it and restore it as a new iPad after you bought it? If not, I would do that first and see if that helps.
~Lyssa

TS1702 I purchased the app Word Lens but cannot get it out of demo mode.

I purchased the app Word Lens but cannot get it out of demo mode.

Hi bellref, I'm one of the creators of Word Lens.
Once you download Word Lens for free, you can purchase language packs by tapping the language bar at the top of the screen. We currently offer Spanish, French, and soon Italian. If those are not on your list, let us know which you'd like to see.
You can also chat with us at [email protected], or contact us on twitter!

Any chance e90 TV or monitor out?

Any chance for e90 TV or monitor out?

To the best of my knowledge there's no option per se.
You could try a program called Phonescreen. Though I don't know if it will work with the E90. This program allows the screen to be sent via BT to a PC.
640K Should be enough for everybody
El_Loco Nokia Video Blog

Monitor out of range

Brand new Mac Mini out of the box. Hooking HDMI to a Westinghouse L2610NW. Showing "out of range". No way to hook up VGA with what is out of box because there is only a DVI-D adaptor. Tried powering on with no HDMI connected. Tried connecting another computer to the monitor and that works. No DVI connection on the monitor. No other monitor available to connect to. Can you set to 1024x768 out of the box just to get through the set up?

The native resolution for your L2610NW is 1920 x 1200 and the Mac Mini supports that using the HDMI port.
With the monitor connected, reset the PRAM as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.

Monitor out of range problem

I have a G5 dual 2.3 with a Sony monitor (analog) connected to the DVI port by the converter that came with the Mac. I have a problem in that certain games set the default resolution to a setting that is out of range of the monitor. Specifically, the refresh rate is out of range for it. This same problem occurs with any VGA monitor I use. Is there any way around this? I just bought the Cars game for my kids, for example, and I can't use it (Cars does not have a windowed mode).

as a wild guess, some monitors come with software drivers that allow to get more options for setting parameters.
you can check Sony site for any drivers for your monitor model, and also check what video card you have in G5 and check on card manufacturer site for driver updates for Mac OS.

Hp w2072a monitor out of range problem

Hey reader, I'm using a hp w2072a monitor and hooked it up to my ps3 from a hdmi to dvi cable but when output to 1080 p resolution onto the w2072a it said out of range change setting to 1600 x 900 - 60Hz and tried changing it but couldn't find it through the monitor's main menu please help Thanks
This question was solved.
View Solution.

Hi,
you have to change the resolution at you ps3, not in the monitor's menu.
V.
*** Say 'Thanks' with Kudos ***

Live Install - Monitor "Out of Range"

Brand new to Solaris, and fairly new to *nix.
Tried installing from the Live CD, and my monitor goes "out of range" when the GUI boots. Likewise, did the text installer, installed "slim_install" and enabled gdm and the same same thing occurred. I am able to boot from the Live CD with the VESA driver, but curious how to troubleshoot and resolve the issue without using VESA.
Video is Intel i915.
What would be the best avenue to t/s? Is there a config file I can use to specify the default video settings? Or is this a driver issue?

Just adding 1 to the kernel boot line is enough to boot in single user mode.
Try removing kdm from rc.conf and instead edit /etc/inittab where you can change the default run level from 3 to 5
id:5:initdefault:
and run kdm rather than xdm
x:5:respawn:/opt/kde/bin/kdm -nodaemon
If you get stuck in future, add 3 to the end of your boot line - you'll be in multi-user text mode but with network running so you can download packages, browse the forum with links. I recommend downloading the (text mode) mc file manager which also provides mcedit.

VGA monitor out of range error

Hello all,
I'm putting together a new computer with an oldish VGA only monitor. I used the latest installation disk. Installation went fine. I then did pacman -Syu of course. After that, whenever I boot my computer, it boots the kernel and shortly afterwards (before the login prompt) cause the monitor to go "out of range". I've tested the monitor with a Windows laptop and it seems fine. My question is: why did the VGA mode change during boot? How do I avoid that? If I can get a prompt and install X it'll be one step anyway. Thanks,

lang2 wrote:
I'm assuming you meant kernel log. I had to enable sshd and login remotely to get it:
http://pastebin.com/QQwM99L3
The problem:
[ 4.544007] [drm] Initialized drm 1.1.0 20060810
[ 4.674859] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.674863] i915 0000:00:02.0: setting latency timer to 64
[ 4.706140] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 4.706142] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 4.706393] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[ 4.706396] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.706397] [drm] Driver supports precise vblank timestamp query.
[ 4.736280] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.922865] checking generic (e0000000 fff0000) vs hw (e0000000 10000000)
[ 4.922868] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 4.922883] Console: switching to colour dummy device 80x25
[ 4.923077] fbcon: inteldrmfb (fb0) is primary device
[ 5.083490] Console: switching to colour frame buffer device 240x67
[ 5.195838] fb0: inteldrmfb frame buffer device
[ 5.195839] drm: registered panic notifier
[ 5.195954] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Maybe removing the vga part would help:
[ 0.000000] Command line: root=/dev/sda3 ro vga=773
but I'm basically guessing here.

Monitor out of calibration

I've been successfully calibrating my Apple 20" display with Spyder3. A week ago my calibration went out- way out. Everything is posterized, there is no detail in the highlights or shadows. The brightness button(which I locked) is missing from the "Display" window. Nothing I do seems to allow me to get the monitor back into calibration.
Any ideas?
Thanks.

Everything is posterized, there is no detail in the highlights or shadows.
Check the "Enhance contrast" slider in the "Seeing" tab of "Universal Access" system preference.
The brightness button(which I locked) is missing from the "Display" window.
Is the display's USB cable plugged into the computer? Do the Display's USB ports work?

Monitor out of focus

I have recently purchased a MacBook Pro referb which has worked fine for two months. Suddenly the monitor has started to go out of focus (esp type) in patchy areas. Oddly, when i move the cursor halfway down the monitor it appears to move up one pixel, too - any ideas?

GlenB: Sounds like you've zoomed in a little. To zoom in/out, hold down Control and scroll up or down using the trackpad (touch it with two fingers and move them up or down).
chris65: Sounds like you've changed the resolution to something lower than the native display. To change the resolution, go to System Preferences > Displays and pick the highest one in the list; that will be the native resolution on your display.

[SOLVED] Monitor out of frequency while installing

Past week I completed my first Arch Linux install in a laptop and everything works flawlessly, so I decided to install it also in my desktop computer. I boot from the CD, choose "Boot Arch Linux" option, some boot messages appear, some services start, and before udev service shows the [DONE] status, my monitor goes out of frequency and I can't see anything.
My monitor is a LG Flatron F900P (CRT with a max resolution of 1600x1200). Why is installation not working? Is there a way to force a working video mode during boot?
Last edited by doragasu (2012-03-09 21:51:48)

Have you tried out any of these tips?
What video card do you have?
Can't check this atm, but isn't it possible to select a screen resolution while booting the CD?
Last edited by bohoomil (2012-03-09 17:55:35)

Dual Monitor Out of Frequency

I am reposting this from another area to see if get a response here.
I have a G5 Dual 1.8 machine with a GeForce FX 5200 DVI-VGA and ADC-VGA adapters. It drives to 17in Daewoo LCD monitors.
It all worked fine with dual monitors until I upgraded to 10.4.3. First alternatively one of my monitors went out of frequency after working through most of start up. Then the next causing the same work. Then after getting it to work by swapping around the monitors and reseting the frequency down to 75hz, both monitors went out of frequency.
I reinstalled tiger and upgraded all the way to 10.4.2 and am able to use both monitors. I did this in both archive and full mode. I also upgraded in steps several times so I am confident it is a problem that ocurs with 10.4.3 upgrade.
So it looks like their is a bug in 10.4.3 that does periodically puts the frequency out of range for the monitor.
I am posting this to be helpful to others who might experience this problem and to request any suggestions that I might have missed.

Now I just tried 10.4.5. Still the same problem. So again I went back to 10.4.2 and the problem goes away.
Given the lack of responses to my posting, I am puzzled - there must be someone else out there with a fx 5200 nvidia and vga monitors - why am I the only one with this challenge?

Monitor out in Demo

Similar Messages

Maybe you are looking for