Monitor Out Issue and 2K proxy from RED Issue

I'm having two monitor issues since I updated to FCS3 (Color 1.5)
The first is with most footage.
Most any footage that I bring into Color 1.5 using the "Sent to" feature from FCP7 (720p, 1080p, etc) will not be displayed in my external monitor (JVC DTV). This was not a problem in previous version of Color or FCP. When I adjust "Video Output" in my Color Preference from SD to HD 720p, 1080p etc... My monitor recognizes that new input. It tells me that it is no receiving a signal in a different frame size (rate). I have tried every combination of monitor setting under the sun in the Color Preferences Room and nothing will change that. (This is not a universal issue). I DO NOT HAVE ANY OF THESE ISSUES IN FCP7. There are only two ways I can see this footage, the first is in my Projects Settings bin in my Preferences Room. If I change my Resolution Presets to any of the 4k options, I see a tiny picture in my external monitor. The other way I can see an image in my external monitor is to go into my Secondaries Room, enable a secondary, goto the preview window and select the Color Matte tab (the middle of the 3 tabs on the upper right of the picture).
The second issue I'm having is with RED proxy files. When I bring into Color 1.5 2k proxy files from the RED everything works and plays fine (in all monitors) except there is a black artifact (bar) along the bottom right. Again this is not the case when I'm looking at these same files in FCP7.
Any help fixing these problems would be greatly appreciated ASAP. I'm scheduled to be grading a $600,000 dollar film in the coming weeks.
Thank you
Color vs 1.5
QT 7.6
GFX Card: VIDIA GeForce 7300GT
PowerMacG5 (Quad Processor)
MacOS 10.5.7
RAM: 4 GB
AJA Kona: 6.0.5 (also went back to my old 6.0.2 with the same problems)
Monitor: JVC DTV- checked this in multiple monitors with the same result

My Project settings are exactly what i want for this given project (as example)
Resolution Preset 1280 x 720 HD
Frame Rate 59.94
Width 1280
Height 720
Printing Density: Linear (0 Black - 1023 White)
Render File Type: Quicktime
Quicktime Export Codec: Original Format (But tried different options here with no result)
Geometry room looks clear, Scale, AR etc are all standard 1 or 0

Similar Messages

  • Re: How can I filter out email and website results from search results?

    I can't seem to add a further question to my original question.
    Although with your help I found how to select (and drag!) Spotlightcategories, the next time I went to search, it used different parameters than those I'd selected. For example, I'd unchecked Mail and web pages entirely, yet mail appeared second in the search results and web pages at the bottom.
    If I don't click that you helped me this time, it's because I want to keep the discussion open until I am SURE I've fixed it.
    Thank you.

    Setting 'Spotlight' preferences and using it to search seems to be the best answer, because it sorts results by type.
    , System Preferences, Personal, Spotlight, Search Results (or clicking Spotlight Preferences at the bottom of an active search) lets you control search results by types of files quite specifically:
    Message was edited by: kostby

  • When I cut and past text from Firefox to Microsoft Works I get an error stating 'Out of memory, close applicantions and restart windows'. This does not work. When I had IE I never had this issue. Help!

    When I try to cut and past text from Firefox to Microsoft Works I receive an error that says 'Not enough memory, close applications and restart windows'. This never works! I never had this issue with IE! How can I fix this issue?

    If the crashing only happens with other peoples projects it could be for a variety of reasons. There are tons of asset references saved in the library (the location every item was imported from) and much more. None of those locations will exist on your system and internal complications may simply happen, especially with any runtime shared assets.
    If possible you should consider adding more system RAM so you can multi-task. RAM is extremely cheap. I'm assuming from a smaller 500GB HD and 4GB RAM that you're probably on a laptop however. Installing RAM is still usually pretty easy if you have the notebook manual (or grab it online). It typically involves just lifting the keyboard or opening a single panel on the bottom of the notebook but it varies greatly. At any rate, 8GB RAM would help you quite a bit. If you do, just make sure you get the correct type of RAM (again, in the specs in your manual).
    Even when you run out of physical RAM, Flash (like any other application) will still see more RAM based on the OS's swap memory setting (using available space on your HD as RAM). It will get much slower but Flash should see the total amount the 32bit OS can handle for RAM (it doesn't know if it's physical fast RAM or SWAP (fake) HD RAM though). If you open other apps with Flash they should also operate, but will also use swap RAM and you've probably noticed your HD crunching a lot while more apps are open.
    That said, I have a 4GB RAM in my older i7 lappie and have used Flash CS5.5 and CS6 on it extensively, with other applications open. Although my projects contain mild assets and mostly tons of code. No issues at all. I just think your heavy assets are crashing you.
    Either way, glad you got your work done. You're welcome and good luck!

  • DVI Out Flicker and connection issues- Macbook Pro 2006

    No matter which monitors/cable combination I use, my external display flickers at random times. Sometimes, the signal will come back a second or two later, other times it will go out until a reboot.
    From my unofficial "tests", this happens more (but not always, and never consistently) when...
    * I am doing anything demanding like video or flash
    * When I have an expresscard in the slot
    Hardware Notes:
    * 1st gen Macbook Pro 2.0ghz (ati 256mb)
    * 10.6.3 - I don't know if this started happening on a particular release. I think it still happened in 10.5
    * DVI to DVI connection. Tried on two monitors with different DVI cables (even the ones from monoprice)
    * I use the external monitor as my main device (always have for 4 years
    I can't find any threads on this particular issue, maybe someone can point me in the right direction. Thanks for any help!

    I'm exactly on the same issue. Have you found a solution ?

  • I turned on my monitor and it was all red the background

    i turned on my computer and it has gone red color on everything i tried the menu on monitor to adjust and it wont go back i have even tried factory reset and nothing.
    This question was solved.
    View Solution.

    Hello vany39,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I  understand that your monitor is washing everything with a red background. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    As well if you could provide the product number for your monitor that would help as well.
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Issue connecting Consumer Proxy from SCL to SAP ECC

    Hi all,
    We are trying to connect duet Enterprise with an ECC 6.0 Ehp4 and we have an issue with connecting through a Costumer proxy from SCL to ECC.
    1-     The wizard is not creating properly the logical port.
    2-     In SOAMANAGER->Technical Administration Tab- the system connections is having issues, the connection doesn`t appears.
    3-     In SOAMANAGER-> Service Administration Tab->Business Scenario Configuration:
    When we make changes to DUET_STARTER_SERVICES_ALL, it activates too quickly, is not seen the u201CSOA Configuration Request Queue Managementu201D progress so if I change to another Business Scenario it works as expected.
    I left you some screenshots of those issues. If you need more information abut the systems or configurations just ask for. Thanks and I hope you can help me.
    [SE80 Service Consumer|http://www.image-share.com/upload/706/136.png]
    [SE80 ServiceGroups|http://www.image-share.com/upload/706/137.png]
    [SoaManager System Connections|http://www.image-share.com/upload/706/138.png]
    [Business Scenario Configuration|http://www.image-share.com/upload/706/139.png]
    [Web Service Administration|http://www.image-share.com/upload/706/140.png]

    Hi Eduardo,
    I do not fully understand. Are you currently trying to configure the out of the box service "Starter Services" or are you developing your own scenario (ZCO_SALES_ORDER...)?
    From your "SoaManager System Connections" screenshot it looks like the connection to your backend system was not created successful. If you used the Wizard, can you also try to follow the manual steps from the documentation (Chapter 3.3.2 Configure the Service Provider for Starter Services Endpoints). Maybe you will face the same problem as [here|System Connection Wizard;
    Regards,
    Holger.

  • How to find out when data was deleted from table in oracle and Who deleted that

    HI Experts,
    Help me for below query:
    how to find out when data was deleted from table in oracle and Who deleted that ?
    I did that to fidn out some data from dba_tab_modifications, but I m not sure that what timestamp shows, wether it shows for update,insert or delete time ?
    SQL> select TABLE_OWNER,TABLE_NAME,INSERTS,UPDATES,DELETES,TIMESTAMP,DROP_SEGMENTS,TRUNCATED from dba_tab_modifications where TABLE_NAME='F9001';
    TABLE_OWNER                    TABLE_NAME                        INSERTS    UPDATES    DELETES     TIMESTAMP         DROP_SEGMENTS TRU
    PRODCTL                        F9001                                                     1683         46       2171            11-12-13 18:23:39             0                   NO
    Audit is enable in my enviroment?
    customer is facing the issue and data missing in the table and I told him that yes there is a delete at 11-12-13 18:23:39 in table after seeing the DELETS column and timestamp in dba_tab_modifications, but not sure I am right or not
    SQL> show parameter audit
    NAME                                 TYPE        VALUE
    audit_file_dest                      string      /oracle/admin/pbowe/adump
    audit_sys_operations                 boolean     TRUE
    audit_syslog_level                   string
    audit_trail                          string      DB, EXTENDED
    please help
    Thanks
    Sam

    LOGMiner --> Using LogMiner to Analyze Redo Log Files
    AUDIT --> Configuring and Administering Auditing

  • My mac keeps freezing when i try and print anything from preview. any ideas as to what the issue is or how to fix it?

    my mac keeps freezing when i try and print anything from preview. any ideas as to what the issue is or how to fix it?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Monitor wigging out; lines and weird layers; Software or Hardware?

    Monitor wigging out; lines and weird layers jiggle and shake back and forth.
    iMac will only run a few minutes before it happens.
    I am ran Apple Hardware Test and everything checked out OK and my iMac ran flawlessly for hours after AHT, then I restarted it and BAM!! there it is again only worse.
    Could this a software issue?
    Any ideas??

    same thing here....was fine one min, then i come back after the screen saver came on, and it wouldn't respond. It wasn't responding so I had no option but to force shutdown. Turned it back on and the screen went wacky on me. Now it'll start up, but won't make it to my desktop. I can access it via afp (file sharing) but not VNC (screen sharing). Somebody help please! this is my second Mac to go bad and I'm starting to get really disappointed.

  • Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help...

    Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help... I have scoured the net trying everything the last few days.

    Please correct your porfile: iPhone 4 do not have IOS 6.1.4.
    The usual troubleshooting steps are, also remember to test it after every step:
    1. Restart
    2. Reset
    3. Restore from backup
    4. Restore as new.
    If no joy, make an Appointment with the Apple genius and have them evaluate

  • Why are sent emails from mac mail going to out box and message saying cannot connect to ATT server?

    I receive emails via ATT to my mac mailbox. But when I send an email it goes to the out box and I get a message that it cannot connect to the server?
    The genius bar said that APPLE and ATT were working on this, but very frustrating. Any suggestions?

    Same is happening with me.  Was having intermittent DSL service - called AT&T to rectify.
    After the internet was back up and running, I could no longer send outgoing mail from my Mac Mail 5.3 application.  I didn't change any settings or update any software, yet the IT person i was talking to (the same who corrected my internet issue) was saying it was a Mail problem.
    I disagree considering it was working 1/2 hour before we started our conversation!
    Any insight would be helpful.
    Definitely set up the way AT&T suggested!

  • HT5012 Any body suffering leggsness while opening the appstore and game center  from mnimaze center...... In ipad mini pls sort me out and tell me ......it will be improve after the update to ios 7.0.3

    Any body suffering leggsness while opening the appstore and game center  from mnimaze center...... In ipad mini pls sort me out and tell me ......it will be improve after the update to ios 7.0.3

    There have been issues with the app store and with game center. And they all seem to be on Apple's end. I'd wait for the next update and see if that helps.

  • I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    I am trying to print a PDF file to a legal size paper and I would like for it to fill up the page. How do I do this? I went into the settings and changed it from letter to legal, but it's still printing out the same size. Can someone help me, please?

    Are you trying to Print to PDF or are you trying to Print a PDF file to a physical printer?

  • I want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone

    i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!

    Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com

  • I transferred pictures over from my computer to my iPhone 5 and now i cannot delete them on the phone and cannot work out how to delete them from my phone by the computer?

    I trasferred pictures over from my computer to my iPhone 5 and now i cannot delete these pictures from my phone, and i cannot work out how to delete them from my phone by the computer as the pictures do not show up in my files on the computer, how can i remove them i have over 400 pictures that need removing?

    If you have a Mac with iPhoto, plug the iPhone in and open iPhoto. Choose to import the photos. Once they have been imported, there should be an option to "Remove Imported Photos from Device". Choose this.

Maybe you are looking for