Monitor problem w/ M-Audio MobilePreUSB in GB2

I am trying to monitor my GB2 audio tracks in stereo out of the M-Audio 1/4 inch outputs i my studio monitors but only get one side ?
Say I have a rhythm track down in GB2 & am am tracking a vocal or second guitar I only hear the track I am recording on one side of my speakers ?
Also when I go to record a guitar track I don't hear the settings that I choose in GB 2 for amp simulation when I track the guitar ?
Any know what I amy be doing wrong ?

http://www.thehangtime.com/gb/gbfaq2.html#leftspeakeronly

Similar Messages

Problems with M-Audio Fasttrack Pro and Garageband after 10.5.2

Hi all,
I use GarageBand daily with my M-Audio FastTrack Pro and have had absolutely no problems until I installed the 10.5.2 update.
Suddenly the Audio randomly cuts out when I'm recording, monitoring or playing back - also my recordings appear to skip and jump too. Usually I can rectify it by power cycling the Fasttrack but the problem re-occurs after about 30 seconds of recording.
I have double checked the I am using M-Audio's latest drivers and have repaired permissions and the disk. I was wondering if anyone else had had any problems with this?
All help would be appreciated, looks like I'm going back to 10.5.1 though.

Hi !
Still no answer from M-Audio but it seems that they are not in cause.
I read on several topics of Apple's Forums some similar problems with other audio devices and also with some USBhubs.
I ran some little tests and for my case, using the other USB port of the MacBook seems to resolve the problem (but that's not a permanent solution for my point of view).
Using a selft-powered USBhub works also, even on the port that makes it crash without hub.
As I studied a little bit of electronics, it looks really like a problem of power supply through USB to me. It could be some kind of micro-cuts (or micro-undervoltage) that are sufficient to cut the audio stream and freeze a bit the system but not enough for MacOSX to switch significantly to the internal audio.
But two questions still remain :
Why one USB port of the MacBook and not the other one ?
Why since 10.5.2 ?
Steve, if you hear me ;o)
'Hope they will react quickly !

How can I resolve this problem? The audio engine was not able to process all required data in time. (-10011)

How can I resolve this problem? The audio engine was not able to process all required data in time. (-10011)

Could you do this?
Go to Finder
Go to Applications
Go to Utilities folder
Launch Activity Monitor app
go to its Memory tab on top
tell us what you see at the very bottom?
Here is a sample of mine.
I bet your page/swap amount will be huge.
If there is not enough RAM, OS X temporarily stores RAM data on the harddrive and tries to retrieve it back into RAM when needed, unfortunately that is so slow that GB throws an error as it cannot play it all in real time.

Problems with M-Audio Fast Track Pro interface & FCP\Logic

Hi gang,
I'm using a small M-Audio (Fast Track Pro) external interface to pump sound from the Mac to my speakers (and to input live sound).
I use it a lot with Logic Audio. No problems.
With FCP it does odd things on occasion. It suddenly starts to feedback, creating a horrendous din. Then I have to shut down FCP, replug the USB connect, even restart the computer to get it working normally again. And sometimes it just goes dead ... NO sound to the speakers.
Anybody come across this kind of thing? Any suggestions?
Ben

I'm seeing similar things in Logic Express 8.0.1. I didn't experienced this with Logic Express 8.0, though I only used it a handful of times before getting the update.
Using the Fast Track Pro as an output device seems to work fine, but when I create an audio track and monitor my bass the audio tends to drop out after between 5 to 30 seconds; using inserts on the track seems to make it fail faster. Logic looks like its still monitoring, going by the monitor level, for a little longer, then it gets "stuck". If I record the audio track while its stuck and then play back through built-in audio its a clip of the bass, about a half a second or so long, repeating over and over again making it seem like the Fast Track Pro is, itself, stuck.
While it's doing all this Logic and the whole OS have a tendency to lock up for up to probably half a minute, sometimes longer.

Possibly mundane Mini-DVI to VGA into an external monitor problem

Hi,
I've had a look over the interwebs regarding my problem and it seems as if it's not unusual to have external monitor problems but I'm not sure if mine is slightly different:
I had a perfectly working set up with my new Macbook (the white one, '06 model I believe), that was connected to my Hanns-G HU196D monitor via a mini-DVI to VGA adapter, no problems whatsoever. But for a couple of weeks now my Macbook just flickers a light blue colour, with nothing at all on the monitor, and my macbook is unusable until I remove the adapter. I've read about updating firmware but I can't see my desktop once the macbook is connected to the monitor so it's not possible to configure anything. I've read somewhere that my external monitor isn't compatible with this set up, but it was until a couple of weeks ago!
My Macbook's 4 months old now and since then I've bought a new mini-dvi to vga adapter and a new VGA cable, no connections seem loose on either mini-dvi port or my monitor's vga port.
Thanks if you can help!
Jack

You will need to use a mini Dvi-dvi and a dvi-svideo/rca adapter.
Joy joy hallelujah.
Pardon the sarcasm...I just wasted 3 hours of my life trying to sort the issue out.
Heard a KWORLD PlusTV PCTOTV Converter SA235 USB 2.0 Interface would sort the issue out for under 40$ but it's not Mac.
Hope that helps.
~r

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

Creative Zen 32GB "There is a problem playing this audio" AAC

GCreative Zen 32GB "There is a problem playing this audio" AACZ All right, this is driving me nuts. I have a Zen 32GB and a Vista 32-bit machine. I have been encountering a lot of problems playing AAC files on my Zen--many of the tracks stop short, and the error message "There is a problem playing this audio" appears.
These are AAC files that I ripped off my own CDs using iTunes, so there are no DRM issues. ? I'm not sure if the problem lies in the actual ripping process (although the problem tracks play on my iPod without problem), the importing into my Zen using Zen Media Explorer, or my Zen trying to play the tracks. I've tried turning off my antivirus program, as well as checking the box in iTunes that double-checks for audio errors after ripping. I thought at first that it could be related to scratched CDs, but it also happens with pristine CDs.
I have latest firmware (.2.03) installed, and also the latest version of Zen Media Explorer.
I've searched this forum as well as Google for this exact error message, and don't get any related hits. Can anyone out there help me? Please?

Thanks for that response--I was beginning to feel a little neglected. It's disappointing, though--one of the reasons I bought the Zen was because it advertised AAC compatibility, so that I could have just one library of AAC files for my iPod and Zen, instead of entirely duplicate libraries of AAC and WMA files. Most of the AAC files I've imported into the Zen play fine--I just have to check all of the tracks to see which ones have that audio error. Usually, if I re-import the track, it comes out fine (eventually).

Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point my PC running XP loses all audio.

Several attempts to upgrade to iTunes 11 have failed. After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly." At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray. Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
I did that. I reinstalled iTunes 10.5. Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
What might be the problem with my audio configuration?
Why doesn't my iPhone 4S work with iTunes 10.5? It used to work with iTunes 10.5.
Please advise.
ep

This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards.

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0)

TS1362 my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly"

my iTunes wont play music or videos when i open it it comes up with "iTunes has detected a problem with your audio with your configuration AudioVideo playback may not operate properly" i have uninstalled it and reinstalled it twice and it stil lcomes up with that message every time I opentheiTunes icon I dont knowwhat to do

Hello Wade,
This is typically indicative of an issue with the installation of QuickTime on your computer. The following article provides steps for reinstalling QuickTime to resolve the issue.
"iTunes cannot run because it has detected a problem with your audio configuration"
Resolution
QuickTime may need to be reinstalled. Follow the steps below to uninstall QuickTime and then download and install QuickTime using the QuickTime standalone Installer.
On the Start menu, click Control Panel.
Follow the steps appropriate for your Windows operating system below.
Windows XP and Windows 2000: Open the Add or Remove Programs control panel and selectQuickTime in the list of currently installed programs.
Windows Vista and Windows 7: Click Uninstall a program (or if using Windows Vista's Classic View of the Control Panel, click Programs and Features) and select QuickTime in the list of currently installed programs.
Click the Remove button (or Uninstall for Windows Vista and Windows 7) and follow the prompts to remove QuickTime from your computer.
Download QuickTime. Note: There are two options for downloading QuickTime, be sure to select the option that does not include iTunes.
During the download:
If you choose to run the installer, proceed to the next step.
If you choose to save the download, double click the QuickTimeInstaller file, then proceed to next step.
Follow the on-screen instructions to install QuickTime.
Reopen iTunes.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371
Cheers,
Allen

Itunes won't run because of some problem with my audio configuration? help!

it specifically says "itunes cannot run because it has detected a problem with your audio configuration". anybody know how to fix that. all i did was when my itunes was werking perfectly fine i was uploading some videos onto it but wen i did it was freezing so i did it again and it froze again so i deleted itunes and installed it again. thats when the problem happened. i tried installing quicktime again. that didn't work then i organized my music and video files but it still wouldn't work. my speakers work good. id on't know what the problem is. CAN ANYBODY HELP????!!!!

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
Good luck.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Itunes cannot run because it detected a problem with your audio config.

I keep coming up with this message. I feel like I have tried everything. Uninstalling---reinstalling---installing earlier versions---even tried apple's help page regarding this error. Nothing seems to work. Anyone have any ideas?

I have exactly the same problem. Everytime I try to open itunes it shows the dialog "itunes has detected a problem with your audio config..." and then when it "opens"
has no background, so it's impossible to do something. I've tried to reinstall itunes and quicktime in different ways like both of them separately and following every instruction in Apple's Web site like article #304424. I've installed prior versions for those programs too and the problem persist, tried to clean up the registry, etc. I don't want to reinstall Windows to solve this issue 'cause it seems to be only way to get rid of this! =( HELP!!!

ITunes Cannot Run It Has Detected a Problem With Your Audio Configuration

Well... I've just come back from christmas with my new green iPod nano (second gen), and I try to use iTunes. It has an "...unknown error (-200)." So I download the new iTunes. NOW it says "iTunes Cannot Because Run It Has Detected a Problem With Your Audio Configuration." I've tryed the support but it doesn't have any WORKING solution. If SOMEONE could PLEASE tell me whats going on, I'd be REALLY greatful.
I've been trying to figure this out for almost 3 days now and I'm hanging by a string here.
HP Pavillion Windows XP Windows Media Edition

It is your QuickTime application, actually. What you want to do is go into your Control Panel, and then Add/Remove Programs. Find QuickTime, click on it, and click on Remove, and then follow through the prompts to uninstall QuickTime.
Then, go here to reinstall it:
http://www.apple.com/quicktime/download/win.html
Make sure you choose the second option that says QuickTime for Windows (NOT the QuickTime with iTunes).
Go through the download and install, and whenever it completes, try to launch iTunes.
CG

ITunes 7.3.1 cannot run as it has detected a problem with your audio..

Hey
I installed iTunes 7.3.1 last night, and when I click to open it, a message comes up saying 'iTunes 7.3.1 cannot run as it has detected a problem with your audio configeration'
Please help
Thanks

Hi,
I got this message on the older version (7.3) of iTunes and then I got an error to do with runtime as highlighted in another thread.
I used windows add/remove to uninstall iTunes and reinstalled the latest version.
You could try re-installing the latest version.
Cheers,
Cofnchtr.

Monitor problem w/ M-Audio MobilePreUSB in GB2

Similar Messages

Maybe you are looking for