Monitor refresh error

I am Running photoshop CS3 on a mac pro 2.8GHz 8-core with and ATI Radeon 2600XT graphics card. On any size file, from a small jpeg to an enormous tif, any time I pan around the image, the monitor will repeat a section of the image over and over to fill the screen. That is to say, panning vertically will fill the screen with copies of a random horizontal section of the image (20pixels wide or so). The effect goes away as soon as I perform another action that affects the entire image (zoom, action undo, create new layer, etc.). I have updated photoshop and osx with all available software and firmware updates.
An example of what this looks like: http://www.flickr.com/photos/26107441@N02/2450960322/
My monitor is a LaCie 320 running at 1600x1200@60Hz, well within the supposed range of both the monitor and graphics card.
The only way that the error does not occur while I am working is if I hit tab to hide my palettes in photoshop. If the palettes are hidden, there are no errors. Adobe claims it is not their problem as does LaCie. AMD has not yet responded.

Hey Roo
You might need it to look like this?
You will need to actually poll the activeX node as often as you can to catch the change in status.
(I would actually use the "getScanLine" and some 'Jiggery Pockery' to work out when the new frame is updated)
Thanx
AdamB
Applications Engineering Team Leader | National Instruments | UK & Ireland
Attachments:
Screen Updates.JPG ‏9 KB

Similar Messages

  • Strange behavior in apps/monitor refreshing after theme installation

    Good times of the day everyone!
    I'm very new to archlinux and ArchLinux community (as you can see, this is my 1st post here).
    I use dwm and was playing around with themes.
    I found a GTK Theme - Moka which really suited my taste and installed it.
    But for some reason, after the installation, applications started showing stuff strangely (or maybe monitor refreshing is going strange, i don't really have an idea of what's happening).
    -Change in behavior of applications
    ---Midori:
    ------ Every time i switch between tags, strange big black box appears on the page. To get rid of it I have to scroll down-n-back the page;switch back-n-forth between workspaces; select all and deselect all in the page; click to adress bar.
    ------ When Opening links/sites|Refreshing the pages - big black box shows up and goes away/sometimes doesn't go away.
    ---Pidgin:
    ------ Every time I receive a new message, the text turns into a box of strange mix of colors
    Here are the pictures:
    Would appreciate it if anybody would help me to solve this problem.
    Last edited by theimpaler (2010-03-07 08:54:12)

    Update:
    I've noticed one more strange thing, in Midori if I have only one tab opened, no black box appears.
    EDIT:
    Never mind.. I guess it was the error in theme itself.
    Last edited by theimpaler (2010-03-07 12:07:23)

  • Cache monitoring shows error

    Hi,
    In the runtime workbench of XI3.0, my Cache monitoring gives error:
    Communication Error.
    Please advise.
    Thanks & Regards,
    Shobhit

    Hi  Shobhit,
    There are two types ports being used
    1. J2EE Port usally 50000
    2. HTTP Port usally 8000
    u can check the same using transaction SMICM->Shift+F1
    >>1) In the RFC Dest INTEGRATION_DIRECTORY_HMI, what port shall I use. I am using 50000 (xi start page port). But somewhere I saw '8000'. Also im using user 'XIISUSER'.
    Use J2EE Port (from ID URL)
    2) in the SLD->Business System->Integration Server->What port shall I use. I am using '8000' here.
    Use HTTP Port (from SMICM)
    3) in SICF, sap->bc->ping service is tested as per the document. But should it be left activated too?
    I checked this in my system it is not activated.
    4) in SICF, sap->xi->cache. The anonymous logon data is empty. Is it all right?
    I checked this in my system it is  blank.
    5) On going to the link: http://xi:5000/CPACache/refresh?mode=full , it asks for useid/pwd but is not accepting any of the uid/pwds and gives error: You are not authorized to view the requested resource.
    I think you need to use XIDIRUSER for this..
    hope this helps..
    Regards
    Anand

  • PowerPivot refresh error with data feed from sharepoint list with empty exception information

    Hi,
    My Powpivot refreshing error seems to be different from what others already experienced.
    Scenario:
    Constructed an external data source in the format of Http://<server_IP>/sites/<mysitecollection>/_vti_bin/listdata.svc
    selected one table with some of the needed columns in the next step
    Create calculate colums etc.
    Create pivot tables etc.
    All worked well offline
    Upload the workbook into PowerPivot Gallery
    Reference it from a page through Excel Web Service webpart allowing manual refresh
    The refresh always reports failure with the named external data source
    I opend the log file in C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS and located the following error messages:
    ASPPHOST::ShowEngineError: Out of line object 'DataSource', referring to ID(s) 'f8939b694cae', has been specified but has not been used。The following exception occurred while the managed IDbCommand interface was being used: .
    Please note in the above message, NO detailed exception message was given. In other words,
    the exception information is empty.
    I checked as many things as I possibly could includin the security accounts etc. All seem to be right. But this empty exception got me stuck here.
    What could possibly go wrong? Any help will be appreciated.
    Thanks.

    Hello,
    Here is a good article regarding Where to get information about data refresh failures for your reference, please see:
    http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshooting-powerpivot-data-refresh.aspx
    In addition, which credential option you're configured for the PowerPivot data refresh in SharePoint farm? You can go through the following articles regarding configure the PowerPivot data refresh:
    Configure the PowerPivot Unattended Data Refresh Account (PowerPivot for SharePoint):
    http://technet.microsoft.com/en-us/library/ff773327.aspx
    Configure Stored Credentials for PowerPivot Data Refresh (PowerPivot for SharePoint):
    http://technet.microsoft.com/en-us/library/ee210671.aspx
    Hope this helps.
    Regards,
    Elvis Long
    TechNet Community Support

  • Monitor refresh rates and Open Firmware

    Does anyone know if it's possible to change the default monitor refresh rate of an iMac in Open Firmware and how?
    Thanks.

    Thanks but I think the iMac G5 does have a refresh rate or something analogous to one, in this case I believe it is 60 hertz. I want to know how to change it in firmware because I believe it will solve an issue my display suffers from. See here:
    Stephen Durnin, "Horizontal wavy lines when screen shows too many dark pixels", 06:00pm Sep 16, 2005 CDT

  • X800PRO TD256, monitor refresh rate override

    I would like to know how to override the monitor refresh rate on x800 like in forceware drivers. Thanks
    OK, just installed the Omega drives with multires and it works!

    use the window options that allow you to adjust the refresh rate

  • Monitor input error

    Moved recently and Gateway 3250S, reconnected monitor input error showed up on monitor. Computer doctor did virtual diagnostic and said it was the graphics card. Plus fan wasn't working. Sent specs to purchase return hp Pavilion 6000 pro.MXLO180WRK. Bought & set up the desktop yesterday 7/9/15 with appropriate chords. Turned monitor first, then cpu. Received same error message: Monitor input error. Monitor going to sleep. As per where I bought computer switched out chords and monitors. Still same error.  Where purchased hp suggested I bring everything in and they'll do a diagnostic. That involves renting a car & finding the time.

    The standard Blue & White G3 has a 15-pin 3-row connector that connects to most third-party monitors. So cable adapters should not be the issue here.
    There are two places that hold onto the screen resolution. The first is the PRAM, backed up by the PRAM backup/clock battery. If you have had a power failure or pulled the main power plug, and are now having this trouble, that battery is the prime suspect. I suggest you open the side door on the Mac, find the tiny button nearest the battery, and press and hold it for a quarter minute. then allow at least 5 seconds to pass before you attempt to power up. If the symptoms change, consider replacing the battery.
    The other place the display resolution is stored is in a Preference file. To accommodate an environment with multiple users on multiple computers, the display setting used after you log in is stored in:
    Hard Drive / Users / your_id / Library / Preferences / By Host / com.apple.preference.displays.yourHWAddress.plist
    If you can boot to a different software source such as a System CD, you can both bypass the bad value stored in that preference file and gain access to that preference file to move it to another location (which will inactivate it).

  • Cache refresh error in Production Server in XI

    Hi All,
    whenever any object in ID gets changed cache refresh stops in XI in the production server.It throws error that it is unable to refresh the cache.All post installation activities are done properly.What should be done to solve the issue.

    What is the exact error? You may try looking into these two guides:
    [How Tou2026 Handle Caches in SAP XI 3.0:|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290?quicklink=index&overridelayout=true]
    [How Tou2026 Handle XPI Caches in SAP NetWeaver 7.0:|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0332b2a-eb97-2910-b6ba-dbe52a01be34?quicklink=index&overridelayout=true]
    For an overview of cache refresh errors in the Integration Repository or Integration Directory you can check SAP Note 780747.

  • Set permanent monitor refresh rate without xorg.conf

    Hi everyone,
    Came back to archlinux, made a clean install with gnome 3. Found out that my GDM and Gnome monitor refresh rate is wrong. For GDM I solved it by adding   xrandr -s 1024x768 -r 85 to the gdm init script. Maybe it's ugly, but at least working. I've got no xorg.conf and I don't want to create it only because of this problem. Using GUI screen settings in System preferences I managed only to set permanently correct resolution (1024x768) but the refresh rate cannot be changed there, so every time I boot now I have correct resolution and refresh rate for GDM, but after login I have 1024x768@60 only, so I have to manually issue   'xrandr -r 85' every time I login. Can I fix it without creating xorg.conf file under /etc/X11? What I already tried was creating the config file under  /etc/X11/xorg.conf.d/  and set proper resolution and refresh rate there, but it didn't help. If someone has advice or idea, i will be very grateful. Thanks a lot in advance.

    I think you need to specify the values from the manufacturer's website.
    Here's my /etc/X11/xorg.conf.d/10-monitor.conf:
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "DELL"
    ModelName "U2311H"
    HorizSync 30.0 - 83.0
    VertRefresh 56.0 - 76.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nouveau"
    VendorName "NVIDIA Corporation"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    I probably don't need to specify "Driver" with open-source drivers, but it's easier to just replace it with "nvidia", since I sometimes switch to the proprietary ones.
    $ xrandr
    Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 4096 x 4096
    VGA-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 509mm x 286mm
    1920x1080 60.0*+
    1680x1050 60.0
    1680x945 60.0
    1400x1050 74.9 60.0
    1600x900 60.0
    1280x1024 75.0 60.0
    1440x900 75.0 59.9
    1280x960 60.0
    1366x768 60.0
    1360x768 60.0
    1280x800 74.9 59.8
    1152x864 75.0
    1280x768 74.9 59.9
    1024x768 75.1 70.1 60.0
    1024x576 60.0
    800x600 72.2 75.0 60.3 56.2
    848x480 60.0
    640x480 72.8 75.0 60.0
    720x400 70.1

  • Cannot add Portlets: Portal Repository - Refresh Errors

    I cannot add portlets in Portal 3.0.8.
    When I click the "Refresh Error" link in the Portal Repository, I get the following error:
    PROVIDER[527954]: Oracle Portal Pages PORTLET[886]: TN_ORGAN LANGUAGE: s ERROR: User-Defined Exception
    How do I get rid of the error?
    null

    The way the Refresh works is that for each provider, Oracle9i AS Portal contacts the provider for its list of portlets. It will request the list in each of the installed languages. For database providers, this call is the get_portlet_list API. For web providers, this call is the oracle.portal.provider.v1.Provider.getPortlets java API.
    The error you are seeing in the refresh log is being caused by an exception raised in provider=527954,portlet=886,language=s in either the get portlets or get portlet methods. You should check these two methods with Swedish.

  • I hit the wrong monitor refresh rate and now lost monitor picture.  How can I get back to the right refresh rate with no pic to view?

    I hit the wrong monitor refresh rate and now lost monitor picture.  How can I get back to the right refresh rate with no pic to view?

    Try this:
    Mac OS X 10.6 Help: If you changed your display’s resolution and now it doesn’t display a picture

  • How to monitor Spool errors/Spool request in CCMS

    Hi @ all,
    I have configured our Solution Manager system to monitor the spool system in the CCMS environment. However I also want to monitor spool errors/spool request in the *CCMS. I have already search in SDN for a solution but couldn´t find any. Do you have any idea how I could monitor the spool errors in CCMS (like in the transaction SP01) ?
    Kind regards
    Thomas

    Hi
    Have you checked this [http://help.sap.com/saphelp_nw04/helpdata/en/18/2625c6fed011d18e410000e83dd9fc/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/18/2625c6fed011d18e410000e83dd9fc/content.htm]
    [http://help.sap.com/saphelp_47x200/helpdata/en/34/658a3b15566262e10000000a11402f/frameset.htm|http://help.sap.com/saphelp_47x200/helpdata/en/34/658a3b15566262e10000000a11402f/frameset.htm]
    Jansi

  • DTP - Monitor Entry - Error PSA

    I have a routine in a transformation to create a monitor entry if a certain field errors out.
    I still want all valid records to be updated in the DSO, but just want to show that there was a failure.
    If I use the setting "Valid Records Update, Reporting Possible (Request Green), then the DTP loads to the DSO with a request status of Green, writes the errors to the error stack, but does not show any warnings or labels stating there are error PSA.
    If I use the setting "Valid Records Update, No Reporting (Request Red), then the monitor will create an entry stating the error, will add the errors to the error stack, but will not set the request status to Green to allow activation.
    How can I determine if there are errors (below a certain threshold set in error handling), yet still set the DSO Request status to green (similar to 3.5 error handling, allowing valid records to update, but showing in the monitor that there are error PSA)?
    edit
    Routine is:
    *selecting SAP User ID from PEMP_105 into 0TCTUSERNM (USER).
    select single /BIC/PUSERID into RESULT
        FROM /BIC/PPEMP_105
        WHERE /BIC/PEMP_105 = SOURCE_FIELDS-PERNR.
    *This will create a monitor entry/error PSA for any records that are not
    *present in PEMP_105.
    IF RESULT IS INITIAL.
          MONITOR_REC-MSGID = 'RSM'.
          MONITOR_REC-MSGTY = 'E'.
          MONITOR_REC-MSGNO = '799'.
          MONITOR_REC-MSGV1 = 'No User ID present in PEMP_105 for Employee'.
          MONITOR_REC-MSGV2 = SOURCE_FIELDS-PERNR.
          APPEND MONITOR_REC to MONITOR.
    to skip a record
          raise exception type CX_RSROUT_SKIP_RECORD.
    ENDIF.
    Edited by: Cote Adams on Apr 2, 2008 11:52 PM

    Your guess is correct, but I don't want to have Operations have to look at the error stack every night to determine if there is an error. I want there to be a symbol or entry in the monitor to tell them there is an error. Just like 3.5, when there are errors (less than the max number of errors), the valid records pass, but the monitor status shows a different symbol.

  • Getting # to Refresh error in web-i report.

    hello
    yesterday i opened the report it was opened properly but today while i opening  the same report i am getting  #TOREFRESH error even i refreshed am unable to find the data it was showing the same error in the entire columns of a report.But while i am opening the same report via bi-launch pad it was showing the correct data.i am using SAP database.can anybody please let u know me y am getting the problem& what is the resolution for that.
    Thanks in Advance
    Suresh.

    Hi Suresh,
    Please go through below thread will help you-
    #TOREFRESH ISSUE IN WEBI
    #TO REFRESH Error In Webi report
    If you are generating universe from BEx query then change aggregation property of the measure object from "Delegated" to "Sum" and then try.
    ~Anuj

  • Refresh errors

    How do I troubleshoot refresh errors? I have 7 calendars in my google calendar that I sync with iCal. This has worked flawlessly for over a year. Now any 3 of the calendars, will produce refresh errors that produce error dialog boxes that I cannot get off my screen.
    How do I go about troubleshooting the refresh, so I do not receive these errors?

    Any ideas for Shining Star?
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

Maybe you are looking for