Monitor release (Bildschirmfreigabe) in OS 10.7.3 not working

I used to run a Mac Mini as a Music server locked in a cabinet, without monitor just as a naked machine.
Whenever I needed to do some service to the machine, like adding a new CD, I connected via a Mac Book Air using the built in remote acces (Bildschirmfreigabe).
Since updating both machines to 10.7.3 thsi doesn work anymore. I get no acces at all, or a question for a password (which I changed a few times on the Mini, but it is not acceptet from remote. I am desperate!
Any idea?
Thanks
Falk

Ok. So like I said, I tried this several times at my house. Now I'm over at my parents and I tried it once and it worked fine. We both have the same internet provider. I had read from someone somewhere that he tried it with different internet and it worked. Can anyone explain why this is? Both seemed to download at same speed.

Similar Messages

"PC health monitor driver" on Satellite L750D with Win 8 not working

Hi,
I use a Toshiba laptop (model: Satellite L750D psk4ye).
Yesterday I upgrade this Windows 7 to Windows 8 pro (32 bit).
I installed some driver but when I try to setup pc health monitor driver in my computer it is not working.
I try one more time but failed again.
Ive download again this driver from
www.toshiba.eu/innovation/download_drivers_bios.jsp but its not working.
Now what can I do. Please help me..........

Hi
Try to download the PC health monitor released for newer models like for example Satellite L870.
As far as I know it should be possible to install such tool since the health monitor isnt model specific tool.

Message Monitoring Tool in RWB for Integration Engine Messages not working

Hi all
We currently work on a Pi 7.11 system. I f we start the runtime workbench and going to the message monitoring, we want to get in to a message in the integration engine. Normaly we should get the same sxi_monitor in the web browser, but we only get the soap envelope. The pipeline steps on the left side and also the payload cannot be seen.
We increased the rights of the user to sap_all but this did not changed anything. We also implemented the J2EE monitoring rule.
Seems to me as we forgot a setting after installation, but which??
Thanks in advance for your help.
Oliver

Hi Oliver,
I work on PI 7.0 and I know it's very different from 7.1x releases, but your problem sounds like a similar "problem" on 7.0.
Is your message sycronous? At PI 7.0 the default configuration is defined to remove the payload of sync messages. You can change it on JAVA Visual Administrator.
Try to find this parameter in Java Visual Administrator and set it to "false", below you will find the PI 7.0 path to this:
Server >> Services >> SAP XI AF Messaging >> messaging.syncMessageRemover.removeBody
I hope it helps,
Marcelo Vieira

External monitor says no signal and retina display is not working

my retina display stopped working, then i got an external monitor to view my desktop. I then set my laptop back to its factory settings. but now i can't view anything no matter how many monitors I try. I tried the dvi the hdmi and nothing.

Hi,
Have you tried
1.leaving the screen flipped open,
2.connecting power
3. connecting external monitor; waiting for it to 'wake up';
then 4. closing lid of MBP to activate clamshell mode?

Secondary monitor does not work after OS X install

My secondary monitor does not work well after OS X install. The image on my secondary monitor is different even the screen svaer image is different and the mouse can not be seen.

Try the easy thing first - NVRAM reset:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
If that does not work, post back with more info, including the version of Mac OS you are running. How is the external monitor connected, did it ever work, and from what OS X to what was the "OS X install" in your title?

3 DVI monitor not working after upgrade

I have three monitors connected to my new Mac pro via Active Minidisplay port to DVI adapters. They are all Dell 24" (1 2407,and 2 2405) they worked fine on 10.9.2 but after the upgrade to 10.9.3 only two monitors will work now. Verfiied that I was following Apple's document on connecting the three monitors. If I Disconnect one of the two working monitor the previous blank one would automatically go active.

This issue is caused by a bug in OS X 10.9.3. The following steps have been reported to resolve it in some cases (not all.) If none of them works for you, the only other option is to revert to 10.9.2, which can be done by restoring a pre-update backup. You may prefer to wait for Apple to release another update, but I don't know when that will happen.
1. Reset the System Management Controller.
2. Reset the PRAM.
3. Install the Combo updater.

New Release QuickVPN client 1.4.0.5 for windows 7 does not work????

New release of QuickVPN client version 1.4.0.5 for windows 7 is not working properly.
We can not connect; instead we receive this message:
"Remote Gateway is not responding, do you want to wait?"
Dear Cisco,,,,
Your release is not complete; please correct issue and advise after it has been tested.
Rgds, EM

Hi, first disable this POLSTORE.DLL again in your QuickVPN-Folder. Then start in this folder IPSEC.MSC and than IPSEC.EXE. You should get from IPSEC.EXE the error above. If not, than any other problem you have. Follow all the hints here in this thread.
If you get the same error above, than enable this POLSTORE.DLL again and start the IPSEC.EXE. You get the full info what has been gone. And within the IPSEC-Window for Local Computer you may find this FREESWAN-setting.
B.t.w. before I went this way I did export and import the IPSEC-settings from the XP-machine, as it was hinted some posts earlyer. But the way I have gone, works also with manualy deleting the FREESWAN config. With the IPSEC.EXE it will new generated in any case.
When you start via QuickVPN you may monitor also what happens within this IPSEC for Local Computer. Press F5 to keep it aktual.
From time to time the connection gets only succeeded after the second and more times. I have a very slow UMTS Internet-Access.
Juergen
Adding: These effects, getting not connected, first and during the VPN-Tunnel exists, has not changed since the top-first Version of Quick-VPN.
Dear customer, be patient, don't care about these stupid messages, click again or when the connection allready has succeeded through the VPN-tunnel do what you did like to do.
...... and again, with which configuration-scenario do the guys at Cisco test and develop .....
Fortunately, I never was a Cisco partner, only a poor user ;)

EEM script to monitor OSPF neighbor not working

I'm trying to monitor a OSPF neighbor syslog notification event to trigger actions to remove a network statement. I shut down the interface to the monitored neighbor and it removes the network statement which is good. I am also trying to monitor the neighbor to come back up and then re add the removed network statement which is not working. This may be a two part problem but I am receiving warnings that not enough vty lines are available. I am not seeing that the network addition is working at all. Here is my configuration.
event manager applet ospf-watch-down
event syslog pattern "OSPF-5-ADJCHG: Process 100, Nbr 1.1.1.2 on FastEthernet1/0 from FULL to DOWN"
action 1.0 cli command "enable"
action 2.0 cli command "config t"
action 3.0 cli command "router ospf 100"
action 4.0 cli command "no network 2.2.2.0 0.0.0.255 area 0"
action 5.0 cli command "end"
action 6.0 cli command "exit"
event manager applet ospf-watch-up
event syslog pattern "OSPF-5-ADJCHG: Process 100, Nbr 1.1.1.1 on FastEthernet1/0 from LOADING to FULL"
action 1.0 cli command "enable"
action 2.0 cli command "config t"
action 3.0 cli command "router ospf 100"
action 4.0 cli command "network 2.2.2.0 0.0.0.255 area 0"
action 5.0 cli command "end"
action 6.0 cli command "exit"
Here is the EM syslog error message " %HA_EM-3-FMPD_ERROR: Error executing applet ospf-watch-down statement 3.0" I am having the EM end and exit so I'm not sure why it's running out of CLI sessions. I'm also getting this one too " %HA_EM-3-FMPD_CLI_CONNECT: Unable to establish CLI session: no tty lines available, minimum of 2 required by EEM"
I've tested the ospf-watch-up and ospf-watch-down on its own after clearing all of the sessions and they each work on their own. I think this is a bug where eem won't release the session.
R1#show users
Line User Host(s) Idle Location
* 0 con 0 idle 00:00:00
130 vty 0 idle 00:02:13 EEM:ospf-watch-up
131 vty 1 idle 00:00:10 EEM:ospf-watch-up
132 vty 2 idle 00:00:28 EEM:ospf-watch-down
Interface User Mode Idle Peer Address
R1#

I know this is a old post. I was able to use the solution below, but I am having one problem.
Using the below config I am able to receive a email anytime my voice port is in any other state than ON HOOK. The problem I have is the script runs every 30 seconds and I receive an email every 30 seconds the line is in any other state than "ON-HOOK".
Is there a way to have only one email generated ONLY when the state changes from the previous state?
example : the line is on-hook, changes to off-hook or park or whatever- a email would be generated. ( only One email). not one every 30 seconds...
The line goes from Off-Hook back to IDLE. - A email would be generated to advise the line has been restored to a IDLE state.
scheduler allocate 20000 1000
event manager environment _email_from [email protected]
event manager environment _email_to email [email protected]
event manager environment _email_server smtp-server.isp.net
event manager applet check_1/0/0_if_NOT_ONHOOK
event timer watchdog time 30
action 001 cli command "enable"
action 002 cli command "show voice port summ | include 1/0/0"
action 003 foreach line "$_cli_result" "\n"
action 004 regexp "on-hook" "$line"
action 005 if $_regexp_result eq "1"
action 006 exit 0
action 007 end
action 008 end
action 009 syslog msg "PORT_1_is_in_any_other_state_then_on-HooK!"
action 1.0 mail server "$_email_server" to "$_email_to" from "$_email_from" subject "$_event_pub_time:Test EEM port 1/0/0 is SHORTED ie IN ALARM" body "TEST Body"
end
Any ideas?

Keyboard plugs into the back of my display does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

My keyboard plugs into the back of my display monitor it does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Resetting network settings: Setting>General>Reset>Reset Network Settings

SMGW, gateway monitoring not working

hi team,
when i try to run the Tx SMGW, i get an pop up with a message "connection could not be established to local gateway" (hostname sapgw10)
i tried to telnet to the host and it returns blank to the prompt after few seconds. [ECC6.0, WIN 2003, MSSQL]
D:\usr\sap\DV2\SYS\exe\uc\NTI386>gwmon -v
Connect to gateway on host OSISAP01, service sapgw00 failed
ERROR       partner '10.20.40.21:sapgw00' not reached
TIME        Fri Jan 02 01:14:18 2009
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     1
could someone let me know the roadmap to troubleshoot the issue.
the log of the dev_rd as follows.
trc file: "dev_rd", trc level: 1, release: "700"
Mon Dec 15 19:31:56 2008
***LOG S00=> GwInitReader, gateway started ( 2552) [gwxxrd.c     1757]
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    150
intno      20050900
make:      multithreaded, Unicode, optimized
pid        2552
gateway runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
gateway (version=700.2007.02.22)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Bind service sapgw10 (socket) to port 3310
GwPrintMyHostAddr: my host addresses are :
1 : [10.20.40.21] OSISAP01.OptimalSol.com (HOSTNAME)
2 : [127.0.0.1] OSISAP01.OptimalSol.com (LOCALHOST)
Full qualified hostname = OSISAP01.OptimalSol.com
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Mon Dec 15 19:31:57 2008
DpShMCreate: sizeof(wp_adm)          31440     (1572)
DpShMCreate: sizeof(tm_adm)          4401096     (21896)
DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm)          528064     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1544)
DpShMCreate: sizeof(wall_adm)          (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 07630040, size: 5073928)
DpShMCreate: allocated sys_adm at 07630040
DpShMCreate: allocated wp_adm at 07632098
DpShMCreate: allocated tm_adm_list at 07639B68
DpShMCreate: allocated tm_adm at 07639B98
DpShMCreate: allocated appc_ca_adm at 07A72120
DpShMCreate: allocated comm_adm at 07A74060
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07AF4F20
DpShMCreate: allocated gw_adm at 07AF4F60
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 07AF4F90
MtxInit: -2 0 0
Mon Dec 15 19:32:26 2008
GwDpInit: attached to gw_adm at 07AF4F60
Wed Dec 17 00:20:10 2008
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 12 / sock 1412
    (SI_ECONN_REFUSE/10061; I4; ST; 10.20.40.17:3301) [nixxi.cpp    2823]
LOCATION    SAP-Gateway on host OSISAP01 / sapgw10
ERROR       partner 'dalnas1.optimalsol.com:sapgw01' not reached
TIME        Wed Dec 17 00:20:10 2008
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -10
MODULE      nixxi.cpp
LINE        2823
DETAIL      NiPConnect2
SYSTEM CALL connect
ERRNO       10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER     1638
GwTraceHdlInfo:
HANDLE   = 12
TIME     = Wed Dec 17 00:20:09 2008
SOCKET   = 1412
STAT     = NI_CONN_WAIT
TYPE     = STREAM IPv4
OUT      = 0 messages 0 bytes
IN       = 0 messages 0 bytes
LOCAL    = 0.0.0.0:3104
REMOTE   = -
OPTIONS = BUFFERED
ni hdl      = 12
type        = CLIENT
net_stat    = CONNECT_TO_REM_GW_PENDING
hostaddr    = 10.20.40.17
opcode      = NORMAL_CLIENT
conn opcode = REMOTE_GATEWAY
conn vers   = 0
index       = 140
data        = 00000000
ext_info    = 014A2060
offset      = 0
rest_len    = 0
snc_forced = 0
remote gateway infos:
hostname =
hostaddr = 10.20.40.17
service = sapgw01
tpname   = sapdp01
Wed Dec 31 03:54:49 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
Wed Dec 31 03:54:50 2008
ERROR => NiIRead: SiRecv failed for hdl 10 / sock 1440
    (SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.20:4830) [nixxi.cpp    4424]
***LOG S23=> GwIDisconnectClient, client disconnected (048) [gwxxrd.c     11658]
***LOG S74=> GwIDisconnectClient, client disconnected ( osisap02) [gwxxrd.c     11669]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c     11704]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c     11717]
LOCATION    SAP-Gateway on host OSISAP01 / sapgw10
ERROR       connection to partner 'osisap02:4830' broken
TIME        Wed Dec 31 03:54:49 2008
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -6
MODULE      nixxi.cpp
LINE        4424
DETAIL      NiIRead
SYSTEM CALL recv
ERRNO       10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER     20753
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 11 / sock 1432
    (SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.20:4834) [nixxi.cpp    4424]
***LOG S23=> GwIDisconnectClient, client disconnected (050) [gwxxrd.c     11658]
***LOG S74=> GwIDisconnectClient, client disconnected ( osisap02) [gwxxrd.c     11669]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c     11704]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c     11717]
LOCATION    SAP-Gateway on host OSISAP01 / sapgw10
ERROR       connection to partner 'osisap02:4834' broken
TIME        Wed Dec 31 03:54:50 2008
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -6
MODULE      nixxi.cpp
LINE        4424
DETAIL      NiIRead
SYSTEM CALL recv
ERRNO       10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER     20756
WARNING => NiGetHdlParamEx: invalid hdl 11 [nixx.c       2498]
main: ignore type 0
main: NiSelNext (ni_hdl=16, read=1, write=1, connect=0, hdl_info=07230448)
request from CLIENT
GwRequest: request from client 68
GwGetMemory: allocated 073BFFB0 (len=34615)
NiHsLGetHostName: found address 10.20.40.20 in cache
NiIGetHostName: addr 10.20.40.20 = hostname 'osisap02'
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 16 / sock 1372
    (SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.20:4952) [nixxi.cpp    4424]
Adresse   Offset bad request
GwSaveErrInfo2: save err info (240)
***LOG S23=> GwIDisconnectClient, client disconnected (068) [gwxxrd.c     11658]
***LOG S74=> GwIDisconnectClient, client disconnected ( osisap02) [gwxxrd.c     11669]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c     11704]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c     11717]
LOCATION    SAP-Gateway on host OSISAP01 / sapgw10
ERROR       connection to partner 'osisap02:4952' broken
TIME        Wed Dec 31 03:54:50 2008
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -6
MODULE      nixxi.cpp
LINE        4424
DETAIL      NiIRead
SYSTEM CALL recv
ERRNO       10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER     20760
GwSaveErrInfo: save err info (240)
GwSysErr: delete conn 7 (94444887)
GwIDelR3Conn: send error message to server
GwSendRc3: send (appc_rc=CM_PRODUCT_SPECIFIC_ERROR / sap_rc=NI_READ_FAILED) to client OSISAP01 / sapgw10 (0)
GwRqDpSendTo: (OSISAP01 / sapgw10, gw_id=0, appc_ca_blk=-1, len=320, comm_index=-1)
LOCK APPC ca_blk 6
DpGetCpicCommIdx: found index 7 via appc_hdr
found comm entry 7 (tid/uid/mode/conv_id/a_r: 29/68/0/94444887/0)
GwFiSearchConvId: deleted 94444887 local, conn=7
GwRqDpSendTo: send close (bad rc or deallocate)
GwInitLocCommAdmEntry: init gw_comm_adm entry 7
GwListRemove: elem 7 not in comm_write_list
GwListRemove: elem 7 not in comm_wait_list
GwInitLocCommAdmEntry: 0 waiting writes to rem gw
make DISP owner of appc_ca_blk 6
DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 14778)
GwDispWakeUp: send wakeup with ni handle 1
NiIWrite: hdl 1 sent data (wrt=1,pac=1,MESG_IO)
-OUT- sender_id APPC_SERVER       tid 29    wp_ca_blk   -1      wp_id -1
-OUT- action    SEND_TO_WP        uid 68    appc_ca_blk 6       type NOWP
-OUT- new_stat NO_CHANGE         mode 0     len         320     rq_id 14778
GwIDelR3Conn: decrement conv_no of client 0: 0
GwIDelR3Conn: idx/conv = ((-1/3) | (-1/0)), delete conv 7 from conv-table
GwClearConn: conv_no/tcp_conv_no/sna_conv_no: 2/2/0
GwClearConn: free err info
GwClearConn: free r3 conv info
GwClearConn: free buffer info
GwClearConn: free frag overflow area
GwFiSearchConvId: not found 94444887 (remove=1)
GwListInsert: insert elem 7 into conn_free_list (at begin)
GwListInsert: 498 elems in conn_free_list
GwListRemove: elem 7 not in conn_search_list
GwListRemove: elem 7 not in conn_write_list
GwListRemove: remove elem 7 from conn_inuse_list
GwListRemove: 2 elems in conn_inuse_list
GwSelClear: clear RWC for hdl 16
NiICloseHandle: shutdown and close hdl 16 / sock 1372
GwIFreeMemForLU_TP: freed memory for sys 68
GwListRemove: elem 68 not in sys_r3_list
GwListRemove: elem 68 not in sys_reg_list
GwListRemove: remove elem 68 from sys_inuse_list
GwListRemove: 4 elems in sys_inuse_list
GwUpdateClient: act_sys: 4
GwIDisconnectClient: client 68 disconnected
GwFreeMemory: free 073BFFB0 (len=34615)
WARNING => NiGetHdlParamEx: invalid hdl 16 [nixx.c       2498]
main: ignore type 0
main: NiSelNext (ni_hdl=12, read=1, write=1, connect=0, hdl_info=07230348)
request from CLIENT
GwRequest: request from client 85
GwGetMemory: allocated 073BFFB0 (len=34615)
NiHsLGetHostName: found address 10.20.40.20 in cache
NiIGetHostName: addr 10.20.40.20 = hostname 'osisap02'
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 12 / sock 1396
    (SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.20:1664) [nixxi.cpp    4424]
Adresse   Offset bad request
GwSaveErrInfo2: save err info (240)
***LOG S23=> GwIDisconnectClient, client disconnected (085) [gwxxrd.c     11658]
***LOG S74=> GwIDisconnectClient, client disconnected ( osisap02) [gwxxrd.c     11669]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c     11704]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c     11717]
LOCATION    SAP-Gateway on host OSISAP01 / sapgw10
ERROR       connection to partner 'osisap02:1664' broken
TIME        Wed Dec 31 03:54:50 2008
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -6
MODULE      nixxi.cpp
LINE        4424
DETAIL      NiIRead
SYSTEM CALL recv
ERRNO       10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER     20764
GwSaveErrInfo: save err info (240)
GwSysErr: delete conn 3 (99889818)
GwIDelR3Conn: send error message to server
GwSendRc3: send (appc_rc=CM_PRODUCT_SPECIFIC_ERROR / sap_rc=NI_READ_FAILED) to client OSISAP01 / sapgw10 (0)
GwRqDpSendTo: (OSISAP01 / sapgw10, gw_id=0, appc_ca_blk=-1, len=320, comm_index=-1)
LOCK APPC ca_blk 7
DpGetCpicCommIdx: found index 8 via appc_hdr
found comm entry 8 (tid/uid/mode/conv_id/a_r: 36/283/0/99889818/0)
GwFiSearchConvId: deleted 99889818 local, conn=3
GwRqDpSendTo: send close (bad rc or deallocate)
GwInitLocCommAdmEntry: init gw_comm_adm entry 8
GwListRemove: elem 8 not in comm_write_list
GwListRemove: elem 8 not in comm_wait_list
GwInitLocCommAdmEntry: 0 waiting writes to rem gw
make DISP owner of appc_ca_blk 7
DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 14779)
GwDispWakeUp: send wakeup with ni handle 1
NiIWrite: hdl 1 sent data (wrt=1,pac=1,MESG_IO)
-OUT- sender_id APPC_SERVER       tid 36    wp_ca_blk   -1      wp_id -1
-OUT- action    SEND_TO_WP        uid 283   appc_ca_blk 7       type NOWP
-OUT- new_stat NO_CHANGE         mode 0     len         320     rq_id 14779
GwIDelR3Conn: decrement conv_no of client 0: 0
GwIDelR3Conn: idx/conv = ((-1/3) | (-1/0)), delete conv 3 from conv-table
GwClearConn: conv_no/tcp_conv_no/sna_conv_no: 1/1/0
GwClearConn: free err info
GwClearConn: free r3 conv info
GwClearConn: free buffer info
GwClearConn: free frag overflow area
GwFiSearchConvId: not found 99889818 (remove=1)
GwListInsert: insert elem 3 into conn_free_list (at begin)
GwListInsert: 499 elems in conn_free_list
GwListRemove: elem 3 not in conn_search_list
GwListRemove: elem 3 not in conn_write_list
GwListRemove: remove elem 3 from conn_inuse_list
GwListRemove: 1 elems in conn_inuse_list
GwSelClear: clear RWC for hdl 12
NiICloseHandle: shutdown and close hdl 12 / sock 1396
GwIFreeMemForLU_TP: freed memory for sys 85
GwListRemove: elem 85 not in sys_r3_list
GwListRemove: elem 85 not in sys_reg_list
GwListRemove: remove elem 85 from sys_inuse_list
GwListRemove: 3 elems in sys_inuse_list
GwUpdateClient: act_sys: 3
GwIDisconnectClient: client 85 disconnected
GwFreeMemory: free 073BFFB0 (len=34615)
WARNING => NiGetHdlParamEx: invalid hdl 12 [nixx.c       2498]
main: ignore type 0
main: NiSelNext (ni_hdl=23, read=1, write=1, connect=0, hdl_info=07230608)
request from CLIENT
GwRequest: request from client 144
GwGetMemory: allocated 073BFFB0 (len=34615)
NiHsLGetHostName: found address 10.20.40.20 in cache
NiIGetHostName: addr 10.20.40.20 = hostname 'osisap02'
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 23 / sock 1272
    (SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.20:4678) [nixxi.cpp    4424]
Adresse   Offset bad request
GwSaveErrInfo2: save err info (240)
***LOG S23=> GwIDisconnectClient, client disconnected (144) [gwxxrd.c     11658]
***LOG S74=> GwIDisconnectClient, client disconnected ( osisap02) [gwxxrd.c     11669]
***LOG S0R=> GwIDisconnectClient, client disconnected () [gwxxrd.c     11704]
***LOG S0I=> GwIDisconnectClient, client disconnected ( jlaunch) [gwxxrd.c     11717]
LOCATION    SAP-Gateway on host OSISAP01 / sapgw10
ERROR       connection to partner 'osisap02:4678' broken
TIME        Wed Dec 31 03:54:50 2008
RELEASE     700
COMPONENT   NI (network interface)
VERSION     38
RC          -6
MODULE      nixxi.cpp
LINE        4424
DETAIL      NiIRead
SYSTEM CALL recv
ERRNO       10054
ERRNO TEXT WSAECONNRESET: Connection reset by peer
COUNTER     20768
GwSaveErrInfo: save err info (240)
GwSysErr: delete conn 12 (37288997)
GwIDelR3Conn: send error message to server
GwSendRc3: send (appc_rc=CM_PRODUCT_SPECIFIC_ERROR / sap_rc=NI_READ_FAILED) to client OSISAP01 / sapgw10 (0)
GwRqDpSendTo: (OSISAP01 / sapgw10, gw_id=0, appc_ca_blk=-1, len=320, comm_index=-1)
LOCK APPC ca_blk 8
DpGetCpicCommIdx: found index 10 via appc_hdr
found comm entry 10 (tid/uid/mode/conv_id/a_r: 28/561/0/37288997/0)
GwFiSearchConvId: deleted 37288997 local, conn=12
GwRqDpSendTo: send close (bad rc or deallocate)
GwInitLocCommAdmEntry: init gw_comm_adm entry 10
GwListRemove: elem 10 not in comm_write_list
GwListRemove: elem 10 not in comm_wait_list
GwInitLocCommAdmEntry: 0 waiting writes to rem gw
make DISP owner of appc_ca_blk 8
DpRqPutIntoQueue: put request into queue (reqtype 0, prio LOW, rq_id 14780)
GwDispWakeUp: send wakeup with ni handle 1
NiIWrite: hdl 1 sent data (wrt=1,pac=1,MESG_IO)
-OUT- sender_id APPC_SERVER       tid 28    wp_ca_blk   -1      wp_id -1
-OUT- action    SEND_TO_WP        uid 561   appc_ca_blk 8       type NOWP
-OUT- new_stat NO_CHANGE         mode 0     len         320     rq_id 14780
GwIDelR3Conn: decrement conv_no of client 0: 0
GwIDelR3Conn: idx/conv = ((-1/3) | (-1/0)), delete conv 12 from conv-table
GwClearConn: conv_no/tcp_conv_no/sna_conv_no: 0/0/0
GwClearConn: free err info
GwClearConn: free r3 conv info
GwClearConn: free buffer info
GwClearConn: free frag overflow area
GwFiSearchConvId: not found 37288997 (remove=1)
GwListInsert: insert elem 12 into conn_free_list (at begin)
GwListInsert: 500 elems in conn_free_list
GwListRemove: elem 12 not in conn_search_list
GwListRemove: elem 12 not in conn_write_list
GwListRemove: remove elem 12 from conn_inuse_list
GwListRemove: 0 elems in conn_inuse_list
GwSelClear: clear RWC for hdl 23
NiICloseHandle: shutdown and close hdl 23 / sock 1272
GwIFreeMemForLU_TP: freed memory for sys 144
GwListRemove: elem 144 not in sys_r3_list
GwListRemove: elem 144 not in sys_reg_list
GwListRemove: remove elem 144 from sys_inuse_list
GwListRemove: 2 elems in sys_inuse_list
GwUpdateClient: act_sys: 2
GwIDisconnectClient: client 144 disconnected
GwFreeMemory: free 073BFFB0 (len=34615)
WARNING => NiGetHdlParamEx: invalid hdl 23 [nixx.c       2498]
main: ignore type 0
main: NiSelNext (ni_hdl=9, read=1, write=0, connect=0, hdl_info=07230288)
request from CLIENT
GwRequest: request from client 113
GwGetMemory: allocated 073BFFB0 (len=34615)
NiHsLGetHostName: found address 10.20.40.21 in cache
NiIGetHostName: addr 10.20.40.21 = hostname 'OSISAP01.OptimalSol.com'
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 9 / sock 1460
    (SI_ECONN_BROKEN/10054; I4; ST; 10.20.40.21:4191) [nixxi.cpp    4424]
Adresse   Offset bad request
GwSelClear: clear RWC for hdl 9
NiICloseHandle: shutdown and close hdl 9 / sock 1460
GwUpdateClient: act_reg: 20403
GwIFreeMemForLU_TP: freed memory for sys 113
GwUpdateClient: act_reg: 20402
GwListRemove: elem 113 not in sys_r3_list
GwListRemove: remove elem 113 from sys_reg_list
GwListRemove: 0 elems in sys_reg_list
GwListRemove: remove elem 113 from sys_inuse_list
GwListRemove: 1 elems in sys_inuse_list
GwUpdateClient: act_sys: 1
GwIDisconnectClient: client 113 disconnected
GwFreeMemory: free 073BFFB0 (len=34615)
GwReadReqIndex: (process_id: -1)
GwReadReqIndex: no filled request-index-block

Hai,
Please check the link below...
http://help.sap.com/saphelp_nw04/helpdata/en/bb/9f13194b9b11d189750000e8322d00/frameset.htm
If you have a stand alone gateway on WINDOWS then you can kill the process and start it again, if you have installed together with your Instance then you should restart the whole Instance.
Killing the process gwrd and then starting or forcing it to start will not work (waste of time), I have had the similar problem sometime back but on UNIX. I guess it will be same in WINDOWS as well.
So the better way is to restart the whole Instance.
Regards,
Yoganand.V

Mini DisplayPort to DVI not working, No Multi-Monitor, Jerky Mouse

I have an iMac, 27 inch, 2009 model.
Until today I've had a second monitor attached via the Mini DisplayPort to DVI adapter. The monitor is a Samsung SyncMaster T260. This setup has worked perfectly well so far.
Until today that is. Now the monitor is not recognised any more and if I try to select "Detect Displays" the mouse pointer hangs every few seconds - stops dead and then restarts again.
What did I do to make this happen? Nothing (that i'm aware of). Haven't installed anything, not done a software update, just literally rebooted and it's not working anymore.
_*Things that still work...*_
The Mini DisplayPort to DVI adapter works on a Mac Mini, so that's OK
The DVI cable works fine when plugged into a PC or Mac Mini, so that's OK
The Monitor works fine when plugged into a PC or Mac Mini, via DVI, HDMI or VGA, so that's OK
So I've established that, in isolation, each part of the system is functioning perfectly well.
*_Things I have tried - without success..._*
1) Rebooting - both iMac and monitor
2) Unplugging all cables and reconnecting then rebooting again
3) Clearing the PRAM - done it twice just to make sure
4) Updated to OS X 10.6.7
5) Reset the SMC
6) Deleted the com.apple.windowserver.plist files at /Library and ~/Library
7) Googled for solutions - plenty of people seem to have one or the other of these symptoms...
Can anyone shed any light on what's happened here ? Please help!
Cheers
Mart
** Sorry if this is in the wrong place, I just found a forum specifically for the iMac so posted it there but not sure how to delete this one. **

Well, it would be interesting if that's when it had occurred. At the time, I hadn't installed 10.6.7, and hadn't installed anything immediately prior to the problem occurring.
It doesn't seem like there's any way (a-la System Files Checker on Windows) of checking the integrity of system files which may have been corrupted, nor a way of reinstalling any update in the case of this happening - or is there a way of doing this? You don't seem to have any control over updates apart from applying them - if something does go wrong, there's no way of backing out. I guess Time Machine is the answer to my own question there.
I'm happy that it's working now, but it was a pretty extreme fix to have to wipe the entire system. At least it wasn't a hardware issue, I'll be thankful for that!

PI 1.3 Interface Monitor is not working

Dear all,
Today, I found one more very basic monitoring of Cisco PI 1.3 is not working.
I enabled interface health monitoring on Cisco PI 1.3 for some critical ports.
However, even I shutdown these ports the PI still show them as UP.
I am really disappointed with PI.
Best Regards

1. Yeah I Have checked Changes done on the RPd.
2. I have run a sample report on the answers and also a dashboard created
3. The sample report run has not Dynamic variables or any other system variables.
Thanks for the reply.

UCCX: Silent monitoring is not working and recorded file is also not playing

Hi,
Running UCM 8.5 cluster with UCCX 8.5.
In CSD, silent monitoring is not working.
Windows XP OS is running on supervisor desktop. when i select the agent
then the silent monitoring icon will highlighted once i click on the icon,
after 5-7 seconds i am getting an error "Silent monitoring session has
failed".
Not able to playback the recorded files:
I can able to record and the file size is 2.6mb for approximate 3min
recording.When i tried to play from supervisor record viewer it is playing
but no voice is coming. And i downloaded using play & save option and
tried to play the .wav file but i can't hear any voice.
Problem is while playing back the recorded file. I can able to see the
recorded files in the UCCX.
Please help me out!!!
Thanks & Regards,
Krishna

It's likely the same problem: CAD is not forwarding packets to CSD or the CCX recording service. Two common causes for this are:
The phone is not spanning to the PC port or does not allow PC Port VLAN Access. Change these options to true on the phone's configuration in CUCM.
The NIC of the agent's PC running CAD is not processing 802.1q-tagged Ethernet frames. It must not drop these and pass them into the Windows NDIS stack for CAD to get them. Google is your friend here; this commonly requires registry changes to make the NIC process the packets.

External Monitor Not Working With Macbook Pro

My computer was working fine with an external monitor, then my computer froze, and I had to hold down the power button. When I turned it back on, my computer would not work with an external monitor. I've tried different cables, so it's not the cable. The monitor is being detected by the computer, but nothing is showen on the external monitor. When connecting the monitor to the computer, the computer's screen goes blue, then turns back to normal. I
I cannot reset the SMC by removing the battery, I do not have the confidence to remove my battery, and do not have the time to send the computer to someone else to do it.
I also tried updating my OS from 10.7.4 (Might've been 10.7.3) to 10.7.5.
My computer is a MacBook Pro (13-inch, Mid 2010), running OS X 10.7.5 Lion.
I need to get this problem fixed ASAP, any help is appreciated.
Kind Regards,
Sergee237

I forgot to mention, I'm connecting the monitor via MiniDisplay -> HDMI. I've also tried USB -> HDMI and USB -> DVI -> HDMI but none of them seem to work.

HT6065 I have a problem with my Mac book pro, my external monitor is not working and i need it to do my business. Please can someone help me with this. I am running windows 8 on parallels.

Since I have up dated my Macbook pro, my external monitor does not work. Who can help me

It was working untill i did the update

Monitor release (Bildschirmfreigabe) in OS 10.7.3 not working

Similar Messages

Maybe you are looking for