Monitor reports wrong version for NetWare

We're all at 8.0.1 for all our agents now.
However, Monitor reports that on NetWare, it's 8.0a
But if it's on Linux, it's 8.0.1 being reported.
I'm assuming it's a bug?

Welcome to GWMonitorland. It has reported it this way since GW7 and perhaps 65. Two of my biggest problems with Novell is their naming and versioning.
Here is how 8.0 SP1 or 8.0.1 is reported: on the Netware console, the GW NLM modules shows as version 8.00.01. On GWMon, it's (as you see) 8.0a. On the Console screen, 8.0.1. If you're not on a major service pack (e.g., hp2ftf1revdbeta900000), then you're better off paying attention to the date of the .exe, .nlm, or script. The minor revs often show as the main version when queried (e.g., 7.0.2hp3 will show as simply 7.0.2). As you can tell, there's an overall lack of consistency when it comes to reporting versions as to what you think you've loaded and what certain pieces may report as the running version.
So to more directly address your issue, this is "working as designed" as best I can tell. 8.0a = 8.00.01 = 8.0.1 = 8.0 SP1. If this is not working as designed, it's been broken for years.
/minirant
Aaron

Similar Messages

  • Total No of pages different in report printed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8)

    Currently in our application, we are using Crystal Report XI R2 for generating the reports. We are in the process of upgrading the Crystal Report to SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). I updated that on my machine and all the reports work fine. I didn't have to modify any of the reports.
    However when comparing the reports, we found that there are few reports on which the total no. of pages differ from the report displayed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). Comparing the reports, it looks all the data that were fit on one page earlier with version XI R2 doesn't fit on the same page with version 13.8, thereby increasing the page counts.
    The fonts, page margins everything set on report itself. Nothing being set in the code.
    Both the application is using the same report that is pulling the data from the same database. Our application is a web application.
    Any suggestion, why this is happening.
    Thanks.
    Sanjay

    I am not sure what is being compared here?
    CRXI R2 designer to CRVS?
    CR XI R2 in some version of .NET to CRVS?
    CR XI R2 using RDC SDK to CRVS?
    Also, is this happening on your development computer or after you deploy?
    If you compare the the "Page setup" options dialog between reports that work and those that do not work, do you see any difference?
    Is this a web or a win app?
    Are you seeing the same issue when viewing and exporting - say export to PDF?
    What is the printer driver used and it's version?
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Million+ views - SAP Crystal Reports, developer version for MS VS: Updates & Runtime Downloads

    1,000,000! One million views in just over three years;
    SAP Crystal Reports, developer version for Microsoft Visual Studio Updates & Runtime Downloads;

    Re. runtime distribution limits; WIN apps, free. Web apps used internal to your organization, free. Web apps deployed external to your organization, extra licensing applies. Check with sales: 866-681-3435
    Worldwide Office Locations | SAP
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Why windows 8.1 in WSUS 3.2.7600.262 (lastest) report wrong version OS 6.3

    In the console of WSUS into a Windows server 2008 R2, i have any clients in different version XP, 7, 8 and now 8.1 but for this client version 8.1 WSUS report a wrong version Windows 6.3 like first with Windows 8 --> 6.2
    Microsoft resolved the problem for wrong version in WSUS console for Windows 8 and 2012 server, but the problem appear again with 8.1 and 2012 R2.
    I'm afroid because this issue is know since Windows 8.1 preview exist...
    I think there is a bug that not resolved by Microsoft because i have installed the last KB for WSUS : Version
    3.2.7600.262
    Also i googlelised this problem during 1 hour but i find nothing on this issue ?!  If in a Deutsch forum but anyone find an answer...
    Thanks for your help.

    How do you get the update to install on the 2008R2 box, when it was written specifically for 2012?
    You download the version of the update designed for Windows Server 2008R2 (WSUS v3.2)
    The link is in the KB article. See
    KB2938066.
    Microsoft Download Center
    The following files are available for download from the Microsoft Download Center:
    Operating system
    Update
    All supported x64-based versions of Windows Server 2012 R2
    Download the package now.
    All supported x64-based versions of Windows Server 2012
    Download the package now.
    Update for WSUS 3.0 SP2
    Download the package now.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • "SAP Crystal Reports, developer version for Microsoft Visual Studio" (CRforVS_13_0_9.exe) has error during Installation.

    Hello,
    I just tried to install the new file CRforVS_13_0_9.exe on a Windows 7 Ultimate machine.
    I have Visual Studio 2013 and wanted Crystal Reports to be fully integrated with it.
    By the way, I had already uninstalled CRforVS_13_0_8.exe before I attempted the installation of CRforVS_13_0_9.exe.
    However, the installation failed with the following error message...
    "The installation failed prematurely." The error dialog box with a full error message is attached.
    It may be significant to note that even after what looks like a failed installation, that "SAP Crystal Reports, version for Microsoft Visual Studio" (ver. 13.0.9.1312) does show up in the Programs and Features Control Panel).
    Any help/advice would be greatly appreciated. Please advise.
    Tom Davey

    This used to be quite common on WIN XP and Vista and it was an MS issue. Googling I found the following that may help:
    Fast and easy Windows Error Code 2753 resolution
    Error 2753 Preventing Uninstall/Reinstall - Microsoft Community
    Windows Installer Error Messages (Windows)
    For now, this is the only report of the error with SP 9, so it will be good to check if the above helps.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Your plugincheck webpage has the wrong version for flash, it's 442 not 378 on Linux

    Your plugincheck web page reports an incorrect version for Adobe Flash Player, you report: 11.2.202.378 for Linux, when the current patch is 11.2.202.442
    Firefox 29.0 (required for VMware's crappy cloud interface)
    Flash 11.2.202.442
    Open SuSE 13.1 x64

    Try to delete the pluginreg.dat file in the Firefox Profile Folder and maybe addons.sqlite as well to reset the plugin registry databases.
    See Re-initializing the plugins database:
    *https://support.mozilla.org/kb/troubleshoot-issues-with-plugins-fix-problems
    You can use this button to go to the currently used Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Disk Utility: Reporting wrong size for disk after a restore

    First up, hardware is G4(PPC) running OS 10.4.11
    I've just purchased and installed a new 500G drive for this old workhorse as an upgrade for the previous secondary drive. Set it up with a single partition, JHFS+. No problems so far. Went to copy the files from the old drive to this new one and thought, "Why don't I try that handly looking Restore button?". +Yeah, apparently a bad idea+. The old drive is 120GB. I set its (only) volume to be the source and my newly created partition to be the target; set it going and left it alone. All appeared to be well when I came back, until I checked the available space on the new drive.
    Disk Utility now reports that this new, 500G drive has a Total Capacity of 128G (137,438,952,960 bytes).
    *Remedies tried so far:*
    - I've tried reformatting/partitioning, but wasn't able to convince it otherwise. Also tried it booting from an install DVD just in case that made a difference.
    - I downloaded a utility from the drive manufacturer which I managed to get on to an ancient, dusty w2k box. Reformatted the drive with 2 NTFS partitions. This seemed to do the trick as they both mounted when I rebooted the Mac. However, when I went to reformat the volumes to JHFS I noticed that the total disk size was still being reported as 128G. Still, they reformatted fine and I transfered my data to them. On a reboot, though, the Mac decided that it didn't want to see the second partition and only shows me disk1s10, ignoring the second partition I set up.
    - I have an identical, empty drive to the 500G. I thought I might be able to use the Restore "feature" to trick it back. Set up the second 500G in a firewire box, ran the restore from the empty volume to the screwed up one. No dice.
    I thought that OS X ignored any sort of BIOS info on a drive and merely looked at the physical media. Is this correct? Does it store this gathered info in a file somewhere that I can delete?
    *This is a call for help.*
    I have no problems playing with the command line as root, if that's the sort of suggestions you've got. I just thought I'd ask here before I fdisk/dd etc from new500 to old500. Geometry of the new500 is 60801/255/63.

    Thanks! That sounds like a good short term solution for a backup.
    EDIT: Cross reference link for anyone who happens to google this thread with a similar problem:
    http://discussions.apple.com/thread.jspa?messageID=7230072&tstart=0
    Message was edited by: mr_lunch

  • Oracle Forms/Reports compatible version for Oracle 9.2.0.1 database

    Hello,
    I installed Oracle 9.2.0.1 as database and trying to intstall developer suite. Can someone in this group tell me what is the correct version of developer suite that i need to download.
    Thanks a lot.

    as Srini said, you need to go for 9.2.0.2,
    there is no certification for 9.2.0.1 on windows 64 bit.
    https://support.oracle.com/CSP/ui/flash.html#tab=CertifyHomePageV2%28page=CertifyHomePageV2&id=gi0tnl7l%28%29%29

  • Reporting wrong properties for H.264 File

    I copied a .MTS AVCHD M.264 file from the chip recorded by a Panasonic HDC-SD1 to my hard drive and the Properties reported are 1440 x 1080 by Windows 7 and Premiere Pro 5.0.  It looks as if it is actually 1920 x 1080 and other programs report the file this way.  Do I need to update some software, or is this a misnomer that I should ignore?

    >Premiere Pro 5.0
    Current is 5.0.3 for Windows, which includes several fixes and enhancesments... you need to update
    All Adobe updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/
    Also, See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666 to be sure your project sequence matches your video file

  • "file -i" and "xdg-mime" reports wrong mimetype for zip files

    If I run "file something.zip" it returns "Zip archive data" as it should, but if I run "file -i something.zip" or "xdg-mime query filetype something.zip" they both return "application/octet-stream; charset=binary" instead of "application/zip; charset=binary".
    I already tried to
    remove /usr/share/mime/mime.cache and ~/.local/share/mime/mime.cache, then run update-mime-database on both folders
    delete the whole ~/.local/share/mime folder
    remove and reinstall mime-types and shared-mime-info
    without any success.
    I hope someone can help me on this because I've ran out of ideas.

    I too got annoyed at those unreliable mime-type inspectors and went searching for a better one that used the command line. I found "perl-file-mimeinfo" which comes with a wonderful script called "mimetype".

  • Ipad not restoring i get the wrong version for my ipad 2

    For some reason when I try to restore my iPad 2 I get the imagen below.
    I have a Mac Mini with Mountain Lion, up to date, iTunes up to date, ans still I get this, what cold be the error?

    Hi Abe,
    Here is an article of troubleshooting for that particular error:
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    http://support.apple.com/kb/ts4451
    Cheers!
    - Ari

  • Error when use Crystal report Bundled Version with Vs2003 on Windows Vista

    Post Author: MartinoLuccarelli
    CA Forum: .NET
    Hi,  I have developed a software with Vs2003 that uses Crystal report Bundled Version.   I have created a Installation package that include the merge modules,   and i have entered the Licence Key for Crystal_regWiz2003 module.    If i install and use the software in the computer with XP or Windows 2000 I do not have problems.    But when i install the software on the PC with Windows Vista i have this error when the probram show a report "Operazine di Crystal Report non Riuscita perche' non e' stato possibile ottenere una licenza gratuita nel tempo allocato"  Thank's

    Uninstall CRVS2010 that you currently have installed.
    To remove the assemblies from the GAC use gacutil. Google will get you a number of links on how to. Also, see the KB [1535325  - How to remove CRVS2010 Beta 2|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333333323335%7D.do].
    Reinstall CRVS2010 SP1 from here:
    SAP Crystal Reports, developer version for Microsoft Visual Studio: Updates & Runtime Downloads [original link is broken]
    - Ludek

  • Icloudsetup.exe downloads, but install say it is the wrong version

    I downloaded icloudsetup.exe, but when I try to install it, it says it is the wrong version for my computer. It downloads a version for Vista or XP, but I am running itunes on a 64 bit version Windows Server 2008 R2 server. How do I get the right (i.e., a 64 bit Windows 7) version of icloudsetup.exe?

    Hello there, jdtwoseven.
    The following link is to the download of the latest iCloud Control Panel version it also lists the system requirements in the footnotes:
    iCloud Control Panel 3.1 for Windows
    http://support.apple.com/kb/DL1455
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT3702 Can i get a refund if i have purchased the wrong version? I purchased the iphone version instead of the ipad version.

    Is it possible to have a refund from Apps Store?
    I clicked on the wrong version for my new ipad. After installing, then I noticed it is meant for the iphone.
    I have purchased Catan Settlers game. Also, the description is misleading. It does not include the seafarers expansion as mentioned in the description.

    Sorry, but Apple's policy states that, "all sales are final >  iTUNES STORE - TERMS AND CONDITIONS
    But if the information is misleading, you can at least ask for a refund.
    Use the email form here >  Apple - Support - iTunes Store - Contact Us

  • Split Package Installs wrong version

    I noticed that AUR package for gradle and gradle-doc are a split package. I use AURA for my package manager and I opened a issue aurapm/aura#227. However, I am not sure it's a AURA issue.
    If you do aura -Aakx gradle-docs it installed the 1.12 documentation even though if you do -Ai gradle-doc which shows version 2. Gradle installed version 2 but the docs are always 1.12.
    Anyone have an idea why it's doing this?

    @Scimmia, I didn't think it was a PKGBUILD problem -- since doing the searches and looking directly at the PKGBUILD seems to be right. Its frustrating when trying to upgrade gradle and it keeps installing the wrong version for some odd reason.

Maybe you are looking for

  • How to Change the XML data that got stuck up in XI

    Hi, I am executing a scenario which sends the data from HTTP client>Xi->SAP(R/3 4.6).We are queuing the messages in XI, through QoS EOIO.Sender side we have configured the HTTP adapter and on receiver side we have configured RFC adapter.RFC at receiv

  • How to set the size of SUM()/SUM() of NUMBER Tyep?

    I met the oracle truncation error when I post the SUM(a field)/SUM(b field), a and b field are NUMBER Type From the OCI Doc, Numbers with up to 38 digits precision. and I set the size of data buffer 41 for NUMBER TYPE. (for example) rc = OCIDefineByP

  • Field in FMRP_RFFMEP1AX adds date to field

    Ever since we upgraded to ECC6, we've got an odd change occuring in report  FMRP_RFFMEP1AX The material document field(found after drilling down a bit in the report) is now prepending the Material Document field with the date.  In other words, instea

  • Search Help default value

    Hi experts, I want to create a search help for the Material. In the search help I should set some default value like the language and the company. I know how can I set the default language, but how can I say that the default language could not be 'EN

  • I had to restore Snow Leopard from Mavericks - should I upgrade to Mountain Lion?

    Hi, I installed Mavericks from Snow Leopard and it corrupted my computer (MacBook Pro 2011).  I restored the backup and I don't want to try Mavericks again.  I have a copy of Mountain Lion that I never installed. Should I install Mountain Lion or sho