Monitor resoultion with and iBook
I recently bought a monitor to use with my iBook, but it seems that the mini-vga port means my resolution is limited to what my iBook is putting out (1024x768). am i missing a way to use the monitor to its highest resolution? if not, whats the cheapest way i can acheive that resolution? is there a way short of buying a new computer?
thanks
I use a program called Screen Spanning Doctor to enable extended displays on my iBook. It allows you to use a vga monitor in extended mode like on a powerbook.
iBook G4 14" 1.42 GHz 60GB 768MB - Blueberry Clamshell 300MHz 20GB 320MB- both-> Mac OS X (10.4.7) Preforma 630CD, LCIII, Compaq laptop 266MHz 5GB 192MB (GNU/Linux, NOT windoze)
Similar Messages
-
Problems with epub 3 and iBooks 2
Problems with fixed layout epub 3 and iBooks version 2
I am producing an epub 3 fixed layout ebook. My query is whether there is a known issue with epub 3 and the old version of iBooks - iBooks 2.
The epub has passed verification with epubcheck 3.0.1 and I have viewed the file on my iPad with iBooks 3.2 as well as on iBooks on my Mac, and also through the Chrome browser using Readium. In all cases the layout is fine. But when the file is downloaded onto an old iPad using iBooks 2, the layout is all mixed up. The iPad says that its operating system of OS.5 is up-to-date , and will not allow it to be updated, and thus it's impossible to update iBooks to versions 3.
So my question is whether this is a known issue with fixed layout epub 3 and versions 2 of iBooks, and if so whether there is a work around to allow fixed layout epub 3 to be read on iBooks2.Follow-up query: (apple-ibooks-display-options) file needed in epub 3??
I tried adding the old (apple-ibooks-display-options) file to the META INF folder, as you used to for fixed layout epub 2, and the file displayed perfectly on the older version of iBooks, as well as on the latest iBooks. This leads me to ask whether you still need to add the 'apple-ibooks-display-options' file to epub 3, to make them readable on old versions of iBooks, or whether this indicates that some of the settings stating this is pre-paginated etc. are not entered correctly in the content.opf file, but I have checked this and I don't think so.
Any advice on this would be very welcome. -
Problems with epub3 and iBooks version2
Problems with fixed layout epub 3 and iBooks version 2
I am producing an epub 3 fixed layout ebook. My query is whether there is a known issue with epub 3 and the old version of iBooks - iBooks 2.
The epub has passed verification with epubcheck 3.0.1 and I have viewed the file on my iPad with iBooks 3.2 as well as on iBooks on my Mac, and also through the Chrome browser using Readium. In all cases the layout is fine. But when the file is downloaded onto an old iPad using iBooks 2, the layout is all mixed up. The iPad says that its operating system of OS.5 is up-to-date , and will not allow it to be updated, and thus it's impossible to update iBooks to versions 3.
So my question is whether this is a known issue with fixed layout epub 3 and versions 2 of iBooks, and if so whether there is a work around to allow fixed layout epub 3 to be read on iBooks2.Hello vinnyvg
I have an image of a map, each country has a text which links to the corresponding chapter to that country. The connection is made via a text link that connects to a box, which I am using to make a black background the size of the entire page, this box is labeled as diagram (info panel) and the text link connects directly to her.
I have already put all the links in the upper layer as you suggested, but it did not work.
Thanks for the suggestion. -
On my iPad, I'm trying to open a PDF from Safari with iBooks, but when I choose "Open with ..." in Safari, only Pages and Dropbox show as options. I'm running iOS 7.1.2 and iBooks 3.2. I have rebooted the iPad and that did not help, and reinstalled iBooks, which also changed nothing. Thanks for any ideas!
Yup, it was uploaded to our school Wiki as a PDF, and Pages did open it. I was then able to move it to iBooks, but I'd rather avoid the extra steps.
-
How can we change the password in the iBook donated to our nonprofit? No password was given with the iBook and every time we try to install items, the password window pops up. We need to put in printer and other software. Help! We can use the laptop without changing the password.
If you did not get an OS X install-restore DVD with the computer you may need
to buy one from somewhere, and you may be lucky to get a retail OS X 10.5.x
version. The original grey-label install set of software and OS X it shipped with
likely would be an older system than Leopard 10.5. Last versions of G4 Mac, &
G5, shipped with a Tiger 10.4 system; so did early Intel-based Mac. Grey discs
which accompanied other computer build models generally do not interchange.
The last OS X version a PowerPC architecture can use, if supported, is 10.5.8.
A PPC processor at 867MHz & faster should be able to run OS X 10.5 Leopard.
{With the correct disc installer, you can use it to change a password and other
things including re-install, and perform disk utility functions, etc.}
There is a chance you may be able to get a white-label Replacement 10.4 DVD
or Replacement 10.5 DVD from AppleCare or the online Apple Store (800myapple)
from a Mac OS X system specialist; these have been available yet hard to get
as not all persons involved with them seem to know if they still exist until someone
is asking. These aren't retail stock, are special discs for computers who could use
a system later than original old discs; these are complete install discs not for one
specific series of Mac. Generally they'd work in supported PowerPC G4/G5; but
do not replace specialized original install DVD, such as an early Intel mac requires.
You'd need to have a serial number of the computer, and a method of payment
when seeking some replacement system media from Applecare or Apple sales
and these discs are not available in a retail store. The original Retail discs are
labeled differently and shipped in a retail box with a big X on the front. Other
sources for retail 10.4 Tiger or 10.5 Leopard may be online via amazon sellers
or computer resellers who handle repaired Macs. Avoid mystery grey label ones
that were intended to be sold and kept with their original computer kits.
Good luck! -
Printer Sharing with eMac, iMac, and iBook not working
Hello, everyone. I hope you guys can help me out with this:
I have an Epson Stylus CX4600 hooked up to my eMac via USB. My eMac prints fine with it. The eMac is getting its internet via an Ethernet wire going downstairs into my Linksys Router, which sends my Shaw internet to my iBook, my iMac, and my eMac.
I want to allow the iMac and iBook to access the printer over the network directly, so I can just print from those computers and have it come out the eMac printer.
I've looked at many articles on this. So far I've installed the drivers on all computers, plus they can all network to each other over File Sharing, so they are connected.
But I haven't been able to print yet. The most I've been able to do is get the files I try to print from the iBook and iMac to show up on the eMac, in its printer queue. Only it didn't show up for a LONG time. And when it did, the jobs automatically stopped and everytime I clicked start, it would automatically switch back to stopped again. The files would not print.
At this point, I want to get the iBook connected to it first. If I can do that, I'll try the iMac. But the iBook is first priority. I've tried making it connect to the Printer using IPP (IP Printing), and the result was... what I explained in the above paragraph. I also tried just ordinary Printer Sharing, but it said something close to this:
"Unable to locate eMac.local, Unknown host."
That hardly makes sense, because at that time I also tried getting the iBook connected to the eMac over File Sharing which worked. For some reason, the "eMac.local" and "iMac.local" files don't show up in my Network thing when I connect to them, or even when they're not connected. HOWEVER, I think they did at one point. I could swear I saw "eMac.local" and "iMac.local" in the Servers folder in the Network section of the iBook at one point. But it's no longer there.
Please help. I've described my problem as well as possible. What a long post. If there's any way to make my eMac, iMac, and iBook be able to print through my Epson Stylus CX4600 at any time directly, then I'll do it.
Help!Yes. I did say that my eMac, iMac, and iBook are all
connected to the internet and networked to each other
over the Linksys router. I believe the router is
still on factory settings because we never really
"set" or programmed anything with it.
Mac OS 9.2.2 on the iMac, Mac OS X 10.4.8 on the
other two. IP addresses?
192.168.1.100 is what I would use to connect to the
eMac from the other computers.
This is the eMac's IP, correct? Did you type it into Network, or was it assigned by the router's DHCP?
192.168.1.101 is what I would use to connect to the
iBook from the other computers.
This is the iBook's IP, right? Again, fixed or DHCP?
192.168.1.102 is what I would use to connect to the
iMac from the other computers.
Same for this IP.
The iBook, as I've said, is wired. No wireless
connections to speak of.
Okay. Now, if the router is handing out IP addresses via DHCP, what range was it configured for? My Linksys, for example, is configured to hand out IPs in the range 192.168.0.10 to 192.168.0.254. It has the IP 192.168.0.1, so the IPs 192.168.0.2 through 192.168.0.9 are available for me to hand out as fixed IPs. If I was to hand out 192.168.0.100 as a fixed IP, the router's DHCP server would have a potential problem, as it might hand out that address too, and only one device can have a particular IP address on a particular network. If your router is handing out 192.168.1.100, .101, and .102 via DHCP, you could and probably do have a conflict if you've got those addresses set up as fixed IPs. In particular, if you have anything else on the network, including Bonjour-enabled devices such as printers, you're likely to have a conflict.
Best way to resolve a conflict, if any:
1 set all the Macs to either DHCP, or if fixed IPs are required, to a fixed IP outside the range of the DHCP range on the router. (Or you could just turn off DHCP on the router.)
2 check the router to be sure that DHCP is set the way you want it, and the DHCP pool is what you think it is.
3 shut down the Macs.
4 turn off the router, wait 30 seconds, turn it back on.
5 turn the Macs back on, one at a time.
On my Linksys, the way to set the DHCP pool is simple:
1 log into the router. (My router IP: 192.168.0.1. Yours would be 192.168.1.1.) Hit the 'Setup' tab. Verify the gateway IP. (Should be the router's IP. If it's not, something very strange is happening.) Verify the start of the DHCP pool. Verify that DHCP is on (or off, as you want). Verify the end of the DHCP pool. (My start is 192.168.0.10, and there are 245 IPs in the pool, so the end is 192.168.0.254. If I changed the number of IPs to 200, the end of the pool would be 192.168.0.209, and I'd be able to set the IPs 192.168.0.200 to 254 as fixed IPs if I wanted.) If your router allows for IPs to be reserved, you can set up reserved IPs for one or more of your Macs. (A reserved IP is an IP the router holds for a specific device. The network card in each computer has a specific MAC address; if that address is registered with the router, then every time that computer is turned on and connected it will get the IP that was reserved for it... so long as that IP is in the DHCP range and DHCP is turned on. Think of it as a fixed IP without your having to actually fix the IP.) -
We have multiple users, each with multiple devices, on 1 apple id - as we want to share music and ibooks etc. We want the children to have access to the store, but with a financial limit. How do we do this?
Welcome to the Apple Community.
That's simply not possible I'm afraid. You'd need to give them their own account and allowance or make it so you are required to be there to input the password when they wish to make a purchase. -
I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.
gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR -
I have an iPad 2 with iOS 5.1 and iBooks version 2.1.1. I have 64GB of storage, 80% is used. iBooks is using 250MB of storage. I have a large number of PDF files in my iBooks library. At this time I can not add another book or PDF file to my library. When I try to move a PDF file to iBooks the system works for a while...sometimes the file appears and than disappears....sometimes the file never appears. Is ther some limit to the number of books or total storage used in IBooks? Thanks....
Hi jybravo70,
Welcome to the Apple Support Communities!
It sounds like you may be experiencing issues on your non iOS 8 devices because iOS 8 is required to set up or join a Family Sharing group.
The following information is located in the print at the bottom of the article.
Apple - iCloud - Family Sharing
Family Sharing requires a personal Apple ID signed in to iCloud and iTunes. Music, movies, TV shows, and books can be downloaded on up to 10 devices per account, five of which can be computers. iOS 8 and OS X Yosemite are required to set up or join a Family Sharing group and are recommended for full functionality. Not all content is eligible for Family Sharing.
Have a great day,
Joe -
IOS 6.0.1 and iBook 3.0.1 - problems with interactive epub
My iPad 2 was recently updated wtih IOS 6.0.1 and iBook 3.0.1. After the recent update some of my interactive epub files are not working properly. Mainly slideshows, working fine earlier, where I have used jquery and javascript. Does anyone know why? Is there a bug in the updates. Thanks for helping me out of this problem.
LadyAce
Did you see a release note on it somewhere or did you find out through your own experience with it?
Since it was a quietly released 13.3 I am curious what it fixed officially. According to the release notes from Apple with 6.0.1 it did not make any mention that it was patching the data leaking when using WiFi and cell data. Only that complaints of dropped wifi from people using iPads and iPhones that was previously reported was fixed. -
Upgraded to os7 and done my updates on the apps as they appear.. Any function to do with the iBook store is not working or visible. The purchase at the end of a sample book doesn't work either. Anyone have a solution?
Upgraded to os7 and done my updates on the apps as they appear.. Any function to do with the iBook store is not working or visible. The purchase at the end of a sample book doesn't work either. Anyone have a solution?
-
Dual monitor issue with 10.8 and Windows 7 (bootcamp)
I've a read a lot of threads here about people having nightmare-ish problems after upgrading. Thankfully, this isn't one of them, just a frustration that I'd like advice on.
My system: 2010 13" MBP, 2.4GHz Intel Core 2 Duo, 8GB RAM, 320GB HD. Work setup has external 17" Dell Widescreen monitor connected with VGA to miniDisplay adapter. Home theater setup has 23" Dell monitor connected with HDMI to miniDisplay cable.
I upgraded from 10.6.8 to 10.8, as I like to stay up to date and it seemed ML fixed many of the Lion issues. After finding out Front Row is completely gone I just about reverted (my laptop doubles as my home theater control). I found XBMC, and it works, sort of (anyone with news on whether Front Row will be returned to us, let me know!).
Enough babbling, my issue:
When I switch from bootcamp windows 7 back to OS X, my second monitor's resolution is all screwed up (very low) and the dock and menu bar are BOTH on the second (Dell 17") screen, though it's not in a mirror mode.
Usually the dock is on the laptop screen, and the menu bar is on the second.
All I have to do is unplug the miniDisplay port and plug it back in, but is there a setting I'm missing to keep me from having to do this? Also, I've never used Windows at home, so I've never had to switch with the 23 inch monitor connected. Don't really want to try as that system is working quite well right now.
Thanks!
-RobIt's NVidia GeForce 320M.
Just checked the drivers page and the Mac side only lists up to 10.6.8
Should I assume that the update needs to be on the Windows 7 side? At one point last November I tried to update on the Windows side and it caused all sorts of **** on my system causing me to have to reinstall both OS X and 7.
May be worth another try?
-Rob -
Does LR handle a dual monitor setup with different aspect ratios (16:9 and 16:10)?
Does LR 5 handle a dual monitor setup with different aspect ratios (16:9 and 16:10)?
I'm planing to buy a 27" 16:9 monitor and use it as primary together with a 22" 16:10. Does any have any idea?
ThanksMoreover, the two monitors can have completely different characteristics. As always, you really need to calibrate/profile any monitor (with a hardware tool - Spyder, Colormunki etc). That's no more important with two monitors, but you see for sure if you don't, as two dissimilar monitors will then probably look different.
-
I have written a book with the ibooks application and I have gone through the process of publishing it through itunes to the itunes book store. Everything seems to work and i get to the end of the process and get a big green check. However, what now? How do I check to see if it actually got through to the book store or not?
Thanks.Hi khicks48,
Welcome to the Support Communities!
The article below will explains the publishing process for the iBookstore:
Apple - iTunes - Partner Programs - Book Publishers
I hope this information helps ....
Have a great day!
- Judy -
I hit the wrong monitor refresh rate and now lost monitor picture. How can I get back to the right refresh rate with no pic to view?
Try this:
Mac OS X 10.6 Help: If you changed your display’s resolution and now it doesn’t display a picture
Maybe you are looking for
-
When I try to sync my iPod with iTunes I can't because it says it's over capacity. It's not. It's a 16 GB iPod, it's only 105 songs on there. No movies or pictures or such. Anybody got a word of advise? I've tried resetting the iPod but get the messa
-
Why won't a cursor show up in the shape when I double click it?
I thought you could just double click the shape to type in it...The cursor shows up outside the shape in the main part of the document or it highlights unrelated text from a text box, but it won't put a cursor in the shape. After trying 50 times, I
-
QuickTime 7.0.3 and 7.0.4 won't play Expo Keynote or other streaming video
I have been trying to watch the Mac Expo Keynote but nothing works. I click on the keynote link and a file is downloaded (qtbutton_100.mov). Clicking on this file get me to a Quicktime player window, without screen (audio only) and the title "Watch t
-
Is there a way to do something like this without making placeholders? Is there a method In the JButton I could call that would tell me the correct location? JButton[][] o = new JButton[20][20]; o[2][4] = new JButton("Hello"); o.addActionListener(this
-
using Javascript I have a drop down with the following 1. jobs 2. annoucements 3.cars I have few textfields in the same form, one of the textfield is called "position" and is not validated and i want to validate it I want to know how can i write the