MONITOR SCREEN PROBLEMS - has anyone else had this ? HELP ..

Friends,
I am going nuts ( no don't answer that one ! ).
Recently ( possibly after the 10.5.2 graphics update - I can't exactly recall ) my LG flat screen monitor has started to look like a grainy 60's acid art house experiment !!
It is subtle but most disconcerting as I use my beloved G5 every day with Logic P8.
I have tried changing settings - calibration the lot... but still it looks strangely weird - like a TV that is not quite tuned in.
Gradients and shaded areas have weird lines instead of fine tones and artifacts appear around type and lines where was once beautiful and clear graphics.
When I first bought the LG 204WT 20" monitor 5 months ago it was fine !.
I have been using the recommended DVI output and tried different cables and the alternative input - the effect is still there but not quite as bad when using connector to RGB input.
The shaded areas in finder and Logic are almost transparent and grainy with a light blue / pink halo like effect around windows and graphic boxes.
I *don't know how to explain it really but I do hope someone out there may have some answers or at least have an inkling of what I'm trying to describe..*
As if I couldn't make matters worse I did an archive and install to roll back to 10.5.1 early hours of this morning - this didn;'t cure the problem and I lost the use of some music plug -ins and authorizations in the bargain.. Maybe it is time to call it a day and take a long break.
Really I should get a pen and paper and sit with my guitar an a darkened room for a few days.
I called the Mac shop where it was purchased then LG but with no help, advice or offers to replace it.
I guess the monitor basically works but this strange behaviour is arguably quite subtle and may not be considered 'serious' by most people !
*In the meantime if any of you lovely people could take my situation seriously and offer any practical advise I would be most appreciative.*
Many thanks - not quite lost it yet - Paul

Hi Pancenter,
Many thanks for taking time to message.
The resoloution is set as it should be and millions of colours is selected etc.
The screen has had several contrast / brightness adjustments and a factory reset with no improvement.
Also someone suggested the screen zoom might be on but this is all set as normal.
I have an imac which works fine and the difference is quite noticable - on the G5 w/ LG screen there are light blue and pink 'halo's ' around gray areas, graphics have strange patchy dots like a screen print and as I am looking and typing into this forum the gradient shaded area that says 'Apple Discussions' has very poor quality shading with horizontal blue lines !
I've also tested the cables and made sure there are no interferences - this is really weird...
I will try another monitor when I get chance - thanks again.
Paul

Similar Messages

  • I have upgraded my iPhone to iOS 5.1 and now cannot access the camera from a locked screen.  Has anyone else had this problem?

    I have upgraded my iPhone 4S to iOS 5.1 and now cannot access the camera from a locked screen.  Anyone have any suggestions?

    From the lock screen, to access the camera you touch the camera icon and slide in an upward motion. It no longer takes a tap to get it to open.

  • HT1384 My iPod Classic doesn't appear to be charged. There is nothing on the screen. Has anyone else had this problem?

    My week old iPod classic doesn't appear to be charged although it has been connected to my laptop. Nothing happens when I select the menu. I've followed the trouble shooting suggestions but nothing has changed. I've shut down my laptop and rebooted it. Still nothing. Any help would be appreciated.
    Many thanks
    Nugget

    How long did you leave the iPod to charge?  Have you tried doing a hard reset to see if that makes a difference? To do this, press and hold both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • Has anyone else had this problem Viewsonic 19" VA912b "Out of Range"

    I bought 2 new Viewsonic VA912b 19" flat panel monitors and found that when I tried to boot the computer from a CD (both a G4 and G5) running OX10.3.9, the screen would go black then display the message "out of range" then go totally black. The only way to restart was by holding in the button on the computer. I called Viewsonic twice and each time they said they had never heard of such a thing and suggested I try the screens on a Windows machine. That made no sense to me.
    Has anyone else had this problem and has anyone found a workaround?
    I really like the screen, but want to be able to repair permission and optimize the harddrive from time to time.

    You should still be able to boot into the Open Firmware screen
    command + option + o + f
    make any changes necessary to screen geometry using onscreen tools to get it centered etc.
    and then, type:
    reset-nvram
    set-defaults
    reset-all
    I would then, on the reboot which will occur, boot into single user mode, and run "fsck -fy" on the drive - anytime you do a hard reset reboot you very likely will result in corrupt directory and filesystem.
    Applejack would be nice to dump cache folders, swap files, check for corrupt or damaged prefs. And you probably do want/need to delete any .plist the deals with displays.
    Might also want to rerun the combo updater (10.4.6) as well.
    I have G90f-2 and VE800 and really like both. The G90 can run up to 1600x1200 @ 85Hz? and almost everything below that resolution. The VE is a nice 18" LCD too.

  • Since day light savings, events are not saving in my calendar. Has anyone else had this problem?, Since day light savings, events are not saving in my calendar. Has anyone else had this problem?

    Since day light savings, events are not saving in my calendar. Has anyone else had this problem?, Since day light savings, events are not saving in my calendar. Has anyone else had this problem?

    Greetings,
    I have not heard of that issue although some people have reported events showing an hour earlier / later (though I haven't seen that personally).
    Questions:
    What version of the Mac OS are you running (Apple > About this Mac)?
    Can you make an event and then it just disappears?
    Are you using iCloud / MobileMe / Google / Yahoo / Some other server based calendar?
    Try these in order:
    Go to Apple Menu > System Preferences > Language & Text > Formats > Region. Region should be set to the country of your choice. Do not have it set to "Custom" as this can have unexpected results in the iCal window.
    Go to Apple Menu > System Preferences > Date & Time and make sure the Date and Time are correct and that the correct Time Zone is selected.
    If that doesn't resolve the issue:
    1. First make an iCal backup:  Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
    2. Go to iCal > Quit iCal
    3. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    --- NOTE: To get to "Home > Library" in Lion: Click anywhere on the desktop and then click on the "Go" menu at the top of the computer screen while holding down the "option" key on the keyboard.  You will see "Library" in the menu.
    4. Launch iCal and test.
    If the issue persists:
    1. Go to iCal > Quit iCal
    2. Remove the following to the trash and restart your computer:
    Home > Library > Caches > com.apple.ical
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    --- NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    3. Launch iCal and test.
    Hope that helps.

  • HT4623 I keep getting an error message "cannot connect to the internet."  Is this a problem with my internet provider, or has anyone else had this problem.

    I keep getting an error message "cannot connect to the internet."  Is this a problem with my internet provider, or has anyone else had this problem.

    I get that problem once in a while and I will not be able to connect to the Internet with any of the 5 or 6 (or 7 or 8 ) web browsers that I use on my iPad. The one thing that I do that has never failed to work for me is to close all apps on my iPad and reset the device. I can't guarantee that it will work for you, but this works for me every time I get the server failed to load/can't connect to the Internet message.... Or whatever the exact message is.
    If you have a ton of apps in the multitasking display, it can take a while to close them all, so you could just trey resetting the iPad first and that might be all that you need to do.
    Closing apps in iOS 7 works like this. Drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I recently downloaded the latest version of SnowLeopard and now I can't open any pdf files. Has anyone else had this problem?

    I recently downloaded the most recent version of snow leopard to my imac. Now I can't open any pdf files. I just get a dark gray screen when I try to pull one up. Has anyone else had this problem? Please advise.

    See TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
    tt2

  • Unable to open my Nemo's reef for last 4days. Has anyone else had this problem

    Unable to open my Nemo's reef for last 4days. Has anyone else had this problem. It seemed to occur after the last content download

    I too have been unable to open Nemo's Reef properly since January 31 2014. I have used it without problems since August 2013. I recall it self updated around midday and then ever since it's failed to get beyond the opening page of what's in the reef. If I tap the back button it goes back to the iPad screen of apps. If I tap to buy a suggested plant it also disappears from the screen. However I have managed to collect my pearl gifts/sand dollars daily on that initial screen.
    I just cannot buy a plant or get out of this screen without the crash. Just going nowhere.
    Rather frustrating at level 37 and about £80 overall spent in pearls to build the reef and get beautiful fish whilst recovering from surgery past six months. I have found the game very calming. I've really enjoyed this game which past level 8 is surely intended for adults and more strategic play.
    This morning I switched on and there was instead a full screen advert. I hit the x button and it just crashed again. Now it shows my own reef on loading, but instantly crashes even faster.
    Is this an iPad problem or an apple problem. From an Apple point of view FWIW I have noticed my screen gets very hot when playing games such as Bejewelled Blitz too.
    It would be good to know if others have this nemo or/ and overheating iPad problem too. What is the solution?

  • Recently updated to 3.8.2 v1.1 and since then my mac crashes a lot, and can't handle simple tasks. Has anyone else had this problem?

    I recently got told about the new software update for OS Yosemite.  It was version 3.8.2 v1.1 and since then my mac crashes a lot, and can't handle simple tasks. Like playing a 3 minute song, checking emails, and even whilst typing this its crashed so many more times than i've lost count. Has anyone else had this problem? And what do you recommend I do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My battery will not charge unless it is turned off. has anyone else had this problem?, my battery will not charge unless it is turned off. has anyone else had this problem?

    my battery on my iphone 4 will not charge unless the phone is turned off. Has anyone else had this problem?

    Is this observed as the iPhone is plugged into a Computer or into an AC outlet; or both?  In any case you should try a Reset of the iPhone by depressing the Sleep button and the Home button at the same time until the Apple logo appears then wait for the Reset to bring your iPhone back to the Lock-Screen. 

  • HT4623 My camera just recently went blurry. It was working just fine yesterday but then I went to use it today and the pictures are so fuzzy. Has anyone else had this problem with their iPhone 5?

    My camera just recently went blurry. It was working just fine yesterday but then I went to use it today and the pictures are so fuzzy. Has anyone else had this problem with their iPhone 5?

    1st... make sure nothing's covering/smudging the camera lens.  then...
    Standard troubleshooting...
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    Remove the Camera app from Recently Used list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Tap and hold any icon in this list until they wiggle
    - Press the red to delete the Camera app from this list.
    - Press the home button twice when done.
    - Restart the Camera app
    If still a problem restore with your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    If still a problem, it's likely a hardware issue.

  • When I go to my downloads folder on my dock and click the file all the content shows up but as soon as I go to open it in the finder, I get a blank window. Has anyone else had this problem, if so, How do you fix it.

    When I go to my downloads folder on my dock and click the file all the content shows up but as soon as I go to open it in the finder, I get a blank window. Has anyone else had this problem, if so, How do you fix it. I also cant delete anything from this folder because of it. Any help would be greatly appreciated.

    Hey Allen,
    I am having the same issue here in September.  How did yor situation get resolved.  My iPad Siri works great.  My iPhone 5 Siri has been out of comission (OOC) for almost a month and I am beginning to get a little frustrated since Siri works so well in July....ANY assistance would be highly appreciated... Thanx

  • HT201317 Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they a

    Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they appear OK

    Hi AP_In_Surbiton,
    I am really sorry that you have had so much trouble getting your Caller ID up and going.  I'll be happy to help you out with this and get it working for you.
    Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • I have the latest version of Pages 5.2 but I keep getting a message saying I must download the newest version to open my file, has anyone else had this problem?

    I have the latest version of Pages 5.2 but I keep getting a message saying I must download the newest version to open my file, has anyone else had this problem?

    You have 2 versions of Pages on your Mac.
    Pages 5.2 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5.01 can not open Pages 5.2 files and you will get the warning that you need a newer version.
    Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Once opened and saved in Pages 5.2 files can not be opened in Pages 5.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has removed over 95 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
    Peter

  • HT201263 my phone is in recovery mode and wont restore.  instead i receive the error message 1604.  i have used alternative usb cables and am at a loss. has anyone else had this problem?

    Hi,
    my phone is in recovery mode and wont restore.  instead i receive the error message 1604.  i have used alternative usb cables and am at a loss. has anyone else had this problem?

    Hi there hstear93,
    You may find the information in the article below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W. 

Maybe you are looking for

  • How we can use call transaction xd03 in alv report

    hey guys i want now that how we can use call transaction xd03 in alv report by using various tables in report or coding. can you tell me about that by the way of coding so that it can be easy for me to understand and help ful to make report by using

  • BasicRealm getUser() bug in WL5.1?

    Hi, I am facing a weird problem with authentication using a custom realm in WLS5.1. I have written a custom security realm which implements the BasicRealm and ListableRealm interfaces (the realm it does not extend Weblogic's AbstractListableRealm). I

  • Getting PCD folder name of iView

    Hi guys, I'm writing an application to print out the iViews and their properties in Folder A, which consists of sub-folders B and C. THus, the application is retrieving and printing the iViews in sub-folders B and C as well. However, apparently, the

  • Sorry, let me clarity...(DNG 8, XP, CS2)

    After re-reading the DNG 8 page, it will work with XP.  I didn't realize it was a seperate app.  Ihave CS2 with camera raw 3, which is a plug in.  Sorry about my confusion (old age).  Do I need to remove my camera raw plug in??

  • Problems with PDF downloads

    I was ready to blame the latest update from Apple, but perhaps not. Here are the symptoms: Our church publishes a newsletter in PDF format which can be downloaded from their web site every month. This month, after the latest Apple update, the downloa