Monitor setup for Premier CS5?

I will be building a stand alone system for Premiere CS5 to edit HDV tape. I'm a graphic designer by trade and video editing is completely new to me. In addition to building a monster system I'm not sure what to do for monitors. Is it pretty standard to run a dual monitor setup in Premiere as it is with most adobe programs since you can put all your pallets on the 2nd monitor? What size monitors are a standard for premiere? Our IT department tried to get us to use 16x9 format monitors (only 11" tall) on our CS4 systems and they were worthless since only the highest setting kept things in proper perspective and then you couldn't read anything on the screen. So, I'm still using CRT monitors. Also, would it be a wise decision to get a HDTV to hook up to the computer for viewing purposes. I work for a large commercial development company and we will be brodcasting this video to about 12 large HDTVs through out our headquarters. Any advice on monitors would be greatly appreciated.

Take a look at these:
http://usa.asus.com/product.aspx?P_ID=zMRyN4KB5o5rSqKr
http://usa.asus.com/product.aspx?P_ID=VtCFrzY48DGVjc6r
http://usa.asus.com/product.aspx?P_ID=QC3Ie0INJMD9PlEP
Those are all 1080P (1920x1080 res) monitors 22 to 24 inch range. For the price, you can't beat them.

Similar Messages

Dual Monitor setup for Mac Mini???

I just bought a VGA Y-cable and split my monitor signal to two monitors. Unfortunatley the same thing is displayed on both screens where as I was looking for an extension to my desktop.
I found this http://www.national-tech.com/catalog/dvisplitter.htm (the top one for $ 146)
I was wondering if I split the signal with a dvi splitter rather than a vga splitter if i could have a dual monitor setup with more screen space...
Thanks,
Paulie
Mac Mini Mac OS X (10.3.9)

This will do it for you: http://shopmatrox.com/usa/products/datasheet.asp?ID=788
ibook g4, mac mini core solo, powermac g4 gigabit ethernet Mac OS X (10.4.5)

Monitor setup for film sound-edit

Hi freaks,
My monitor setup is 3 Bm5a's and a Bm9 sub. The movie will be mixed LCR, not surround.
In the (Logic 8) prefs/audio/surround i've got it set to 5.1 with the L monitor on output 1, R on out-2 and C on out-8 of the digi 003 in my studio. Output 1-2 run throughthe Bm9. This way when not sound-editing the set functions normally for music.
The style is quite lowkey, intercut with documentary footage so i wont be needing the sub on a seperate channel as it wont be used.
The audio was recorded in M/S which makes things interesting (for me at least) translating this to the 3 channel format.
The M channel is currently set to surround with the front and rear surround channels turned off. If i need to pan it around i can turn on the front surrounds on a channel.
The S channel has a gain mono->stereo plugin with the right channel phase inverted. output set to surround.
Is there a rule for the relative loudness of the center speaker compared to the surrounds? To get them to match i have to drop the center by 20dB!
The mix will be done in a proper facility, but i want to have everything well sorted out. The Pyramix/Protools crowd aren't big Logic fans.

Output 1-2 are connected to the "main-outputs" on the 003 which are thus controlled by the volume knob. The center monitor on output 8 isn't. This is where i was getting the volume difference. I'm presuming they should be the same volume.

Monitor recommendations for PS/CS5.5 print work

Hopefully this won't be retreading old ground too much, but I'm looking for monitor recommendations for using with CS5.5 for print work in Photoshop and InDesign mainly on a new Mac Mini. I've got a Spyder 3 for calibration already so that side of things is covered - the Apple Thunderbolt display is a bit of range financially, plus I'm not sure about the glossy screen myself, ideally I'd be looking to spend no more than £500 and size wise about 24" would be the ideal size due to the amount of deskspace available to me. TIA for any/all help/recommendations!

For starters look heere:
http://www.tftcentral.co.uk/
The degree of perfection is dependent on your final needs. A studio doing catalog work is going to need a monitor all the way up to top providers like Eizo. for my needs where I output to an Epson 3800 and bigger, I find the dell u2412 to be ideal, and at your price category, maybe 2 will fit the budget.
The 2412 does not cover the full Adobe RGB gamut, but it does cover sRGB IEC 61966-2-1:1999, the current preference for online color. I use it because correcting the monitor to match the print for b&w is paramount, and the best monitors for this use LED backlight. The u2412 is admirable for this especially at it's price point.
I also use a 2nd monitor but it is a smaller 4:3 aspect ratio. It's use is strictly for tools and such.
The 2412 is a 16:10 aspect ratio and is far better, imo, for graphics work. Also (and maybe especially!) it is very close to the golden mean ratio giving it a wonderful presentation format. Check it out where you see 16:9 and 16:10 side by side.
When I am working closely with adjustment layers I have enough room on my screen to pull over the specific palette next to the image while tweaking, a big help without losing the ability to fill the screen later if you wish. Simply move the palette back to it's home on the other screen.
Good Luck!

Multiple Monitor Setup for HPE-180t w/ NVIDIA GeForce GT 220 (only one DVI port)

I am wanting to connect mutliple montitors via DVI connection to my HPE-180t. My graphics card is the NVIDIA GeForce GT 220 which has 3 ports (VGA, HDMI, DVI) and does support mutli monitor display. What is the best way for me to connect multiple monitors to my desktop? I would like for all of them to be connected via DVI.
Thank you so much,
Angela
``````````````````````````````````````````
old computer: HP Pavilion PU131AV / a1050y, Windows XP MCE, SP3 32bit, Nvidia GeForce 6600, Intel Pentium 4 CPU, 3.20 GHz, 2GB of RAM
new computer: HPE-180t, Windows 7 Pro (64bit), Nvidia GeForce GT 220, Intel Core i7-930 quad-core CPU @ 2.80 GHz, 8GB of RAM

What is the end goal you are attempting to acheive? Are you looking to clone all three monitors or each monitor to be independent of the other (extended display)?
This document covers how to configure the monitors in Windows 7. I didn't see the GT 220 listed in the specifications, so I take it this is one purchased separately for the unit. Most video cards require multiple monitors to be connected to a different port (to truly achieve a multiple monitor setup). Since the card only has one DVI port, then the other ports (HDMI and VGA will need DVI adapters). An example of an HDMI - DVI adapter can be found here.
The tricky part will be using the VGA - DVI adapter as DVI ports are typically DVI-D which makes it a pure digital signal. VGA is analog, so the adapter will need to be special if the monitor is using a DVI-D port. If it is a DVI-A or DVI-I port, then a standard VGA - DVI adapter will work. If it is a DVI-D port, you will need an active VGA - DVI adapter. If it is DVI-A/I, then a passive adapter will work. This is an example of an Active VGA - DVI adapter. For that adapter, a VGA cable will need to be connected to the VGA port with that end connected to the VGA side of the adapter and then being connected to the DVI port of the monitor.
Provided the video card supports 3 monitors, this would allow all monitors to have a DVI connection. Keep in mind that the VGA port will still deliver an analog signal as opposed to the DVI and HDMI ports. The card specifications do not really say how many monitors it supports, but it most likely does support three monitors.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Need help with dual monitor setup for KDE 3.5.5.

Here's my hardware:
NEC MultiSync LCD 1530V: 1024x768 (analog)
Samsung SyncMaster 941BW: 1440x900 (digital)
nVidia Dual head AGP video card.
The dual monitor works under dual-boot Windows, boot up and pure Linux console. I've googled around for help, changed my xorg.conf file accordingly to some sites, but it wasn't much help.
Here's my working xorg.conf:
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
Identifier "NEC LCD1530V"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 70.0
EndSection
Section "Device"
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
Identifier "NVIDIA GeForce"
Driver "nvidia"
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "NEC LCD1530V"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Using this xorg.conf file, only my NEC LCD analog monitor could display KDE while the Samsung digital can't.
Any suggestions?

Thanks for your help guys, I'm halfway there.
The second monitor shows the KDE desktop, but it isn't exactly what I expected. Right now, both monitors display at 1024x768 (each) or 2048x768 (total). The larger monitor stretches and distorts the display of 1024x768 to its natural resolution at 1440x900 and it isn't what I wanted. Other than that, the dual desktop setup behaves what I expected to.
Here's a snippet of my xorg.conf that currently works:
Section "Monitor"
Identifier "NEC LCD1530V"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "Samsung SyncMaster"
HorizSync 31.5 - 60
VertRefresh 60.0 - 70.0
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "NVIDIA GeForce"
Driver "nvidia"
Option "NoLogo" "true"
Option "TwinView" "true"
Option "TwinViewOrientation" "LeftOf"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
# Option "MetaModes" "1440x900, 1440x900; 1024x768, 1024x768"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "NEC LCD1530V"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen 2"
Device "NVIDIA GeForce"
Monitor "Samsung SyncMaster"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1440x900"
EndSubSection
EndSection
Anyone have an idea?
EDIT: Oh snaps. I just did a pacman -Syu and it upgraded Arch Linux to 0.8 and the 2nd monitor stopped working.

System monitoring setup for j2ee

Hello,
I am seeting up system monitoring in my solution manager7.0 for XI systems. I am able to configure abap engine but not j2ee. whenver i clicked on active check mark for dispatcher and server hearbeat it is turning to red colour where as user defined alert i am able to configure. When i click on dispatcher heart beat and try to open properties it is telling you cann ot maintain properties. Could someone guide me to setup system monitoring for j2ee.
Thanks,
Kiran.

Check
http://service.sap.com/diagnostics
Did you set up the SMD agent on your XI system?
Markus

Monitoring Setup for RWD UPerfrom - 4.3.0

Hello All,
We have recently implemented RWD UPerform for one of our customers and we are looking for documentation on setting up monitoring for RWD from Sol Man but unfortunately I have not come across anything that can help me, does anyone of you have any idea on this or how is that you are managing your RWD servers monitoring ?
Please guide me on this!
Server Configuration:
RWDUPERFORM : 4.3.0
DB : SQL Server 2005
Thanks in Advance
Regards
Sai

Hi Shu Liu,
Thanks for your inputs I have been already through that part but that doesn't speak anything on Monitoring the RWD server but it just says how solman can be integrated to RWD but nothing related to Monitoring services of RWD
I am still finding it tough to setup monitoring for IIS services!
Regards
Sai

Triple Monitor setup for e9270t

I have two 24-inch monitors running at 1920x1200 on my e9270t with GTX260 (1792MB), W7 64-bit. I have an unused 23-inch monitor I'd like to use. I didn't think I could just slap any old video card in. Recommendations?
This is not a gaming rig, I just like lots of real estate for surfing, debugging, etc.
Thanks.

I called HP and asked if they had a three monitor set up, and was told yes they could customize one. Told HP that I am a Mac person and am new to the PC world. Had never run more than one monitor, but that the software I need to run takes three monitors and likes PC's better. Told them the ram, speed, etc that I needed to run, along with the 3 monitors. They said they could easily provide a system to do that. I asked it directions for hook up come with the system, and was told it's easy, you will be able to easily tell which hooks to what. It will be out of the boxes and hooked up in no time. It's easy. All the parts will be there and since you know computers, even though a different platform, it will be easy, you can do it.
Well, not that easy! Or I am a total idiot. Not a good intoduction to the PC world!!!! Gee, with Macs all the parts come in one shipment and ALL the pieces are there and all the cables are there and even easy to follow directions come with...All seems to be not so with HP!!!   Shipment after shipment came and was piled into one corner until the final box, the cpu arrived.
The ports on the back of the monitors and ports on the ATI Radeon HD 5570 2GB DDR2 graphics card are as follows. I have managed to hook DVI to DVI and HDMI to HDMI and have two monitors up and running. Now the third is the pain in the..... It's been over a week of headache. How do I hook them up? 5 or 6 calls now to HP tech support and it's not on their screen so they don't know. Nice!!!! That's why I am asking for more expert help. You guys. If I can't get this resolved in a day or two, the whole system is going back to HP and I will never ever ever ever use HP again, ever!!!
The back of each HP monitor (2 are 2311z and 1 is 2310e) has three ports..VGA (blue), DVI-D (white), and HDMI (black)
The graphics card has three ports.. DVI (white), HDMI (black), and DP   There is an adapter for VGA but is doesn't seem to fit into the DP port. Nothing they gave me fits into the DP port. I have just come back from both Office Max and Office Depot and they don't have any cables or adaptors with a DP port. I have absolutely no clue. All I know is that I was promised it would be easy to set up and all the parts would be here, and it would run three monitors!
HP put in this GC based on my asking for a working three monitor system, so at this point I presume that this card will handle three monitors.(gee, I guess that's a lot to presume though) That's what HP reads off their screen. (they can read and are polite, just don't know anything) No one there at HP seems to have actually hooded up three monitors before.
Help me know how to hood up this mess and get it working, please.
More and more frustrated every day, guess it shows how much I love HP at this point!!
(And the jerk at HP who gave me this cpu with the speaker setting deep within the software turned off just isn't funny! No not the mute and not the volume but the actual speaker on and off that controls the jacks was set to off in the software....that took a week to find and fix. And of course, it wasn't on their screen, so HP tech support couldn't help! It was only by accident I found that setting!)   So far I think I'm doing quite well for a Mac person.
OK, sorry, back to the point..how do I hook up the GC to the third monitor and get it to work?
Deb

Best Mac Pro Setup for Photoshop CS5

I've read around that it's not needed to have the fastest (and costliest) Mac Pro to run Photoshop CS5 at it's best.
However, there doesn't seem to exist any discussions involving the latest models (Feb 2012).
Which would be the optimal Mac Pro available today for running large files (1GB and up) in Photoshop CS5?

LOTs of RAM, fast 6-core 3.33GHz for starters.
Mac Pro Photoshop CS5 and Lightroom 3
Optimize Photoshop CS5
Optimize CS5 CS4 Mac OS X
http://www.macperformanceguide.com

Monitor Setup for Intel Platform

I have installed Solaris 8 on Intel Platform. But I am unable to set the Color resolution of my Monitor and it is working in Monochrome mode. How do I set the Monitor back to color ?

Output 1-2 are connected to the "main-outputs" on the 003 which are thus controlled by the volume knob. The center monitor on output 8 isn't. This is where i was getting the volume difference. I'm presuming they should be the same volume.

Dual monitor setup for prem pro cs6

I asked a question a while back wanting to know can i work on two cs6 programs at the same time. Can this be done? Would it be dual monitors to one PC then could i open one project then another one at the dame time? steve

Cheers guys i will have to ask adobe as i am now mixed up. surely i must be able to use on both computers, i want to work on one project while the other is burning and then work on the project burn it then go back and do another project again on the one i was burning on.

What is the best setup for Photoshop CS5 on a Dual Drive Laptop?

I have a new W701ds with Windows 7, 16 gig of ram, drive C is a 256GB SSD, the second drive is 7200rpm 500GB HDD. I want to use was thinking about partioning the second drive to allow for backup. .

Welcome to the forum.
If the partition is ONLY to be used for backup, you are probably OK, but if you plan on using it for say Scratch Disks, I would hold off on that.
With the fast SSD Drive 0, you will have your OS and programs there. Then you will have your images and your Scratch Disks on Drive 1. Even faster would be to have the Scratch Disks on Drive 2, but you only have the SSD and the one SATA HDD, so the former is as good as it gets.
Good luck,
Hunt

System Monitoring Setup in Solution Manager

Hello Experts,
We are going to implement and configure Solution Manager - System monitoring setup for pre testing purpose
Currenly we have installed below SAP Systems
1.Solution Manager Server
2.ECC server (Without Ides) - Abap
3.CRM Server (Without Ides) -Abap + Java
We need to setup below tasks in Solution Manager
1.Early watch alert
2.System Monitoring
3.Central System Administration
4.Business Process Monitoring
5.Service Level reporting
1.Is it possible to setup the solution manager -above mentioned tasks without Ides system ?
Could you please someone give input reg this.
Thanks
Thirumal
Edited by: Thiru Thirumal on Aug 6, 2008 4:56 AM
Edited by: Thiru Thirumal on Aug 6, 2008 4:57 AM

Hi,
Q. Is it possible to setup the solution manager -above mentioned tasks without Ides system ?
A. Yes.
Check with links for
1.Early watch alert
This process helps you to identify potential problems early, avoid bottlenecks, and monitor the performance of your ABAP and JAVA systems and your most important business processes, regularly, automatically and effectively. The data collection infrastructure comprises the ABAP Service Data Control Center and the JAVA function module Data Provider. The SAP EarlyWatch Alert in the SAP Solution Manager is a service provided by SAP.
To be able to use it, you have:
maintained the non-ABAP systems correctly in the system landscape maintenance (transaction SMSY)
RFC u2013 Connections between: and an RFC u2013 Connections established.
your satellite systems and the SAP Solution Manager system
SAP Solution Manager and the SAP Service Marketplace
Solution Manager system and Solution Manager Diagnostics
Cf: Solution Manager IMG (transaction SPRO).
checked the availability of the tools required for the SAP Service sessions (add-on ST-A/PI), with the report RTCCTOOL.
activated Alert Monitoring and set-up the Automatic Session Manager (ASM) in the Service Data Control Center (SDCCN) of your satellite systems, for all SAP satellite systems and the central SAP Solution Manager of your solution
set-up your systems in a solution landscape in the SAP Solution Manager
configured Solution Manager Diagnostics
2.System Monitoring
The system monitoring in the SAP Solution Manager is, as described above, like a system-wide central CCMS. It can also contain the central CCMS (CEN) of satellite systems. These CENs can then monitor other components.
The graphical display in the SAP Solution Manager gives you access to the alerts of all systems in a solution. You can go to the local or central CCMS of the satellite systems.
The system proposes the most important alerts in the CCMS monitor collection, according to SAP experience, and their alert thresholds, for each system in the solution, in the system monitoring Session. You can activate or deactivate these alerts. The connection between the local CCMS and the SAP Solution Manager allows you to maintain the alert thresholds directly in the SAP Solution Manager, overwriting the values in the local CCMS.
3.Central System Administration
You activate the customizing for business processes in your solution, in the Business Process MONITORING session in the SAP Solution Manager. A monitoring tree element (MTE), or a monitor collection, u201EBPMu201C of several monitoring objects, is created in the local or central (CEN) CCMS of the satellite system.
The data is collected for the monitoring types of the business process monitoring in contrast to system monitoring, as follows:
● The system collects performance (dialog transactions), posting cancellations (V1 and V2) and u201EOther CCMSu201C and interface data, in the local CCMS of the satellite systems.
● The system collects background processing, application list, application monitors, delivery lists, and document size data, in the central SAP Solution Manager CCMS.
The SAP Solution Manager system copies the data from the local CCMS.
The graphical display in the SAP Solution Manager simplifies access to the alerts for the business processes, business process steps or the interfaces between the systems in a solution. You can go to the local CCMS of the satellite systems.
The connection between the local CCMS and the SAP Solution Manager allows you to maintain the alert thresholds directly in the SAP Solution Manager. These overwrite the values in the local CCMS.
4.Business Process Monitoring
The system and business process monitoring (including interface monitoring) in the SAP Solution Manager, both use the Computing Center Management System (CCMS) (transaction RZ20) architecture. This means that system alerts which occur in the local CCMS, are passed to the SAP Solution Manager via RFC connections between the SAP Solution Manager and the satellites. The system shows these alerts in a graphic or in Sessions. You can also handle the alerts centrally, without having to go to the local CCMS of the satellite systems.
You can see the alerts from several systems in a solution landscape in the SAP Solution Manager, in a graphical overview, in contrast to the local CCMS of the SAP Solution Manager satellite systems. This is the view of a central CCMS (CEN). You can also monitor non-SAP systems in a central CCMS (CEN) of a satellite system
5.Service Level reporting
http://service.sap.com/solutionmanager for all solman tasks as given below.
http://www.asap.net.cn/homepage_en/Solution%20Manager%20EN.pdf
http://help.sap.com/saphelp_sm32/helpdata/en/1b/f02c41ab78f66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_sm32/helpdata/en/9f/1f46570f8a4a268b3154e0e0f07280/content.htm
Regards,
Srini Nookala

Queries regarding CCMS monitoring setup

Hi All,
We have configured the CCMS alert monitoring setup for our system and thatu2019s running fine.
We have some queries:
Is it possible to get the availability of the physical server (windows) using CCMS ping?
We have configured it on high availability server and registered the SAPCCM4x and CCMSPING agent to both nodes but facing issue with file system usage monitoring, we are not getting the data for virtual drive, Example: we are getting the data for only 3 drives C, D, S but we are not getting data for other drive like G, Z, F..
We have checked also the ST06 for the file system there also we are getting the same data.
Please suggest
Regards,
Harish

Dear Mansoor
Since your questions are more related to configuration, I would suggest to go through the attached document especially the topics "Email Infrastructure" "Workflow" (defining routing logic for emails) and "Chat infrastructure. Here you will find information alongwith screenshots.

Monitor setup for Premier CS5?

Similar Messages

Maybe you are looking for