Monitor Speakers The old Tannoy Reveal 6 vs. Prokit 5 by KRK

lol pleae dont delete this...i noticed alot of the mods were rockin Tannoys...i want to know, i might pick them up today

Similar Messages

I have a new Mac Mini and a 7 year old Mac monitor. The connectors don't match. What to do?

I have a new Mac Mini and a 7 year old Mac monitor. The connectors dont match. What to do?

I suspect the monitor has an ADC connector
http://en.wikipedia.org/wiki/Apple_Display_Connector
If so you need one of these:
http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2/ref=cm_cr_pr_p roduct_top
Otherwise what connector is on the monitor?

Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina?

Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina? E.g. Using a mini-display cable to connect from the imac mini display port to thunderbolt port on my macbook.

Apple shows only the 27" version supporting Target Display Mode.
<http://support.apple.com/kb/HT3924>

I have two monitor speakers that I would like to airplay to from my iMac. Is this possible? Is there an adapter or receiver? The monitor speakers are KRK VXT8.

I have two monitor speakers that I would like to airplay to from my iMac. Is this possible? Is there an adapter or receiver? The monitor speakers are KRK VXT8.

They have a trial version you can test before you purchase. It limits you to 10 minutes of streaming before it starts inserting noise into the stream.
But you may not need it. I've read a bit further, and it appears that you may be able to stream any system audio to an Airport Express without needing AirFoil since you have Mountain Lion. I though it would work only with an Apple TV, but I've seen mention that it works with the AE as well (I don't have one to try). When you get your Airport Express set up, go to the Sound (speaker) icon in the menu bar, hold down the Option key, and click the icon. You may see the AE listed there as a selectable output device; if so, select it and all your system audio should be sent to the AE, including Spotify.
Regards.

I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

If it won't turn on then the monitor is dead (power supply?, video circuits?). Not worth repairing.
If you have a new iMac then it has thunderbolt. So exactly what is that monitor you are trying to connect? For TB you can connect a mini-displayport monitor. Probably (not 100% sure with TB) can use dvi or vga too if you have the appropriate adapter.

I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is t

I am using duel thunderbolt displays with a MacBook Pro. I only have the option to have sound come from one or the other. Has anyone thought of making the left channel come from both speakers on the left Monitor and the same of the right? If yes, how is that done? The MacBook Pro could even be a center channel if configured in that order.

See the following thread on the same topic:
2 Thunderbolt displays MBP = sound coming from both displays?

Is Adobe going to bring back the old multi Camera monitor?

Why did Adobe take away the Old Multi camera monitor away in the first place. I'm using Adobe because I like Adobe not because I want Adobe to be like Final Cut. Are there other users out there who agree with me? The new multi camera monitor is very limiting and stupid in my opinion.

Lighting is the key.
Your real background should be as flat in colour as you can manage.
Your chair for instance should not be the same colour as your clothes.
Overhead lighting that is fairly close can flare off your hair.
8:31 PM Friday; January 11, 2008

Bought a new monitor.. wide screen 23"... Firefox is not filling the full window. IE works fine but I prefer Firefox. What do I need to do to fill entire window, not just the way it was with the old monitor?

Bought a new monitor.. wide screen 23"... Firefox is not filling the full window. IE works fine but I prefer Firefox. What do I need to do to fill entire window, not just the way it was with the old monitor? edit

Most pages are defined to be a certain size, regardless of how large or small your monitor is. You can use Firefox's zoom feature (View menu) to enlarge the text and images (or just the text, if you prefer) on a page.
In addition to making individual site adjustments, there are some add-ons that will default every site to a higher zoom level. For example, check out:
* [https://addons.mozilla.org/en-US/firefox/addon/6965/ Default FullZoom Level]
* [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]
Does that help?

A question regarding the old connector (headphones jack) used in SE headphones models.

HELLO .
I liked the idea of MH907 , and I both them. Was very satisfied with the motion
activated feature - even if they didnt have the superbass feature like the ones
that were included in the package when I both the w380i phone.
Then I had a few problems with charging the "older" phone - I was using it for 3 years
and had to buy a new one. With limited resources at that moment, I got SPIRO.
Line in or 3,5mm or the connector changed during that period, to standard 3,5mm - just like
other phone ( walkman, ipod ... etc ) manufactures use. So I was unable to use perfectly
good headphones from previous phone and MH907 with my SPIRO.
Normally I didnt argue so much and both new ones - at the time decided for MH700.
Recently, when I lost ( or forgot them somewhere ) my MH700 - btw I was also satisfied
with them , good sound quality, I started searching for new ones online, in the local stores.
I saw a few products available, and was ( still am ) interested in HPM 88.
Noise canceling and superior sound quality speakers are surely a very good option,
but I noticed ( after looking at the pictures online and checking the compatible phones )
- the HPM 88 heaphones also have the old connector.
I asked this question before, but only mentioned MH907 - the answer was : " there are no
such plans " .
Now I ask SE or/and SE Xtras manufacturers again :
Are there any plans to make (the same) older model headphones with new connector ?
If not, is there an alternative solution with an aditional plugin to convert old connector
to a 3,5mm in ( without sound quality loss ) ?
THANK YOU FOR YOUR TIME AND ANSWERS.

Yes, yeah ; once again I agree with you - "over the ear" or lets say normal speakers are prefered choice in studios and professional work with music. It is hard to reach the sound quality with in-ear headphones that the "old fashioned" headphones offer, but in these modern days possible.
When I saw the monitor in-ear SONY headphones online and in SONY local store - you probably know that 50€ is the starting point (the cheapest EX monitor headphones), and reaches up to 500 €
with the best possible head set, I said to myself - surely there is a reasson for such a price.
SONY products are well known for its quality, and headphones with a price of a bit less then "minimum monthly income in our country" surely offer unique sound experience and listening pleasure(s) that I can only dream about at the moment.
I not a producer and I dont make music for a living - but when it comes to outdoor excercise with my bike,walks in the nature and/or just sitting outdoors and smoking - I just can not imagine having big "old fashined" headphones on my head ( an answer why I would prefer in-ear model ) .
I listen to the radio ( with mostly electronic music - but also lots of popular (and new ) songs from pop, rap to rock and metal - where voice and lirics are important and I want to hear them as good as I can. I also listen to harder, faster genres of electronic music like trance, techno and in that kind of genre its more if not all about a good bass line.
So If I quicly finish this post -> MH - 700 are a very good product for an affordable price. I was very satisfied untill I lost/missplaced (or something similar) them. Compared to ones included with SPIRO (both the phone in a package with local (slovenian) mobile carrier ) is like comparing HONDA TO A YUGO if you know what I mean. I would recommend them to every person who wants a bit more from listening to music - but cant afford an expensive headphones.
As for the "long" cord problem -> Did you ever want to reach for something while listening to music and could not, due the short cord ? It happened to me a few times. At least I can shorten that cord with a plastic tensioner or double wrap them around my neck - at least with that way I will not lose them again............. :_) " problem (at least with me) erupts when the cord is to short , not to long "
Thank you for feedback, I will reply when I can, when I purchase new headphones and I also hope to buy a smart phone this year - one of the Xperia models - they are so tempting :_)
PS : sorry for any spelling and grammar errors in my post

My husband and I have upgraded our phones (iPhone 4s and iPhone 5) to the iPhone 5s. We have given 2 of our kids the "old" phones and want to set them up as an iPod touch. Both kids have email and need to be able to text (iMessage).

My husband and I have upgraded our phones (iPhone 4s and iPhone 5) to the iPhone 5s. We have given 2 of our kids the "old" phones and want to set them up as an iPod touch. Both kids have email and need to be able to text (iMessage).
I have read multiple posts on how to do this and I am still confused.
Apple ID/ICoud:
We want to be able to monitor what they do, but do not want their devices linked to our emails/contacts/etc... Each kid has their own email account. So, from what I have read the best way to do this is to use our family Apple ID, but set them up with a separate iCloud account? Is this correct?
Reset/Restore/DFU:
To start fresh we have done multiple factory resets. I did one that someone said was a DFU and a plan ol' factory reset, etc... Not sure the difference. However, when I do that I get the "hello" screen and am able to start setting the phone up anew. However, when I go to set the phone up as an iPod I end with the same result.
So, here is what I am doing (tell me what I am doing wrong):
Hello Screen
Asks me to select language and selecting: English
Select Your Country or Region: United States
Choose a Wi-Fi Network: select my home wi-fi network
Enter password: entered my home wi-fi network password
Activiate iPhone - wants me to enter Apple ID and Passwordsays that this iphone is currently linked to an Apple ID (k*******@gmail.com). Sign in with the Apple ID that was used to set up this iPhone.
Location Services - I have enabled location services
Set Up iPhone
Set Up as New iPhone
Apple ID
Options are to sign in with your Apple ID or Create a Free Apple ID
Or I could "skip this step"
I signed in with my Apple ID
Terms and Conditions - Agree
iCloud - I can select either to use iCloud or Don't Use iCloud - I selected use iCloud
Find My iPhone - I can select either to use find my iPhone or to not - I selected use find my iphone
Once I do this it says iMessage and FaceTime and shows the following:
my email
my other child's cell phone number
and my husband's work phone number
This is where things do not make sense. I only want the phone set up with the current child's email address. Where did I go wrong?

There are a number of Apple services: iMessage, FaceTime, iCloud, Game center, Find My iPad, etc.
Now, to share apps, music and books you need to have the same Apple ID:
iPad's Settings > iTunes & App Stores > Apple ID > Your purchasing Apple ID.
For the other service, your wife should have her own Apple ID.
All she needs is a valid e-mail address, apply Apple ID below:
https://appleid.apple.com
Here's a limk with useful tips: Note: It's also valid in IOS 6
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

I've kept the old version od imovie (6.0.4) through three migrations and now have it on a mac 10.6.8. i prefer it to the new one, but it has recently begun to give me serious problems. is it becoming obsolete?

i've always thought imovie 6.0.4 was the superior product. i've used it edit semi-profesional films. its easy and intuitive, and always gives you what you want, while looking profesional. i have final cut pro, which i use when i have more time or the project is of more importance, but i still love the ease and simplicity of the old imovie. i've migrated it over 4 computers and it has worked fine till about a week ago. it now takes up to 20 minutes to load, frequently drops out. leaves phantom and relic snipets of audio. is there any way i can fix this problem and keep my beloved imovie 6.0.4? can download it from a third party? are the issues because the .app is going obsolete or are there just new bugs on my computer? i've recently uninstalled all my adobe products and put them onto another computer, could that be it? help me obi won, you're my only hope!

klaus 1,
thanx for the reply. i'm on a 10.6.8 snow leopard.
yes, it did arrive via migration, but had been working well for over 2 years, and two years before that on a 10.5, where it had migrated from a mac book g4 where i used it regularly. through all that time and migration, not a single problem
i can't pinpoint the exact 'original' problem, because i'm currently working on two different editing jobs (one serious [a kickstarted campaign] the other, not so much, for my son's pre-school graduation, i was making the school a little video for their website). so during this time, i'm using a combo of; imovie, adobe premiere and final cut pro. and i've had so much pulsing through my computer (and external hard drives), literally hundreds of gigs of HD video, tons of tiff and jpeg files, and much mp4 and aif music files. i often had three or four major applications all open and running simultaneously, so who knows how this all started. but one day, i flipped open my mac, and just clicked on imovie, not a file mind you, but just the icon, and it took like 2 minutes to load (usually 5-10 seconds). i made sure all other apps and windows were closed and tried it again - now 3 minutes to load and it drops out mid edit. and it just kept getting worse.
AND THEN, AFTER IWROTE ABOVE 'I - ME' MADE THINGS, MUCH, MUCH WORSE.
i was aware that there is an old quicktime 7 that gets installed in a 10.6.8 to supplement the newer quicktime x and the various other programs, including imovie, that still use qt 7. i was a bit confused why there even is an icon for qt 7 in the utilities folder, since you never open it directly, it just works behind the scenes. but whatever.
after imovie started acting up, i looked up to see what programs that imovie uses, thinking the problem might be there and found an article that said there was actually an even earlier version of quicktime, (qt 7.0.3 i think) that was specifically made for imovie, but there hadn't been enough major changes in qt to bother imovie, but (there is always a but) there were changes coming that would begin to affect imovie. since the article (i wish i could link it here, sorry) was a year old, i thought maybe the damaging upgrade was already made. so i found this older version of quicktime (the 7.0.3 version) and tried to install it, thinking it would fix my issue, i'd finish the edit, then delete it. but when i tried to open it, it told me, a newer version of of qt was on my computer and i couldn't install it. so very impulsively and idiotically i uninstalled quicktime 7, thinking i would just reinstall it later. but that's when everything went wrong.
SO I MUST STRESS THIS TO EVERYONE! NEVER NEVER NEVER UNINSTALL QUICKTIME.
apparently quick time x is preinstalled into the 10.6.8, in such a way, that its interconnected with like 12 other programs, that will all begin to act erradictly after it is uninstalled. then those 12 programs will each affect 5 more and soon, your computer, then your hard-drive is blown. i tried reinstalling quicktime, but could not. i tried every conceivable way, but could not even find it in any folder. it was gone. and so was qt x.
so when i uninstalled quicktime 7, it affected quick time x in such a way that it stopped working, then could not be found. then all h**l broke loose. every program began to run slowly and started dropping out. functionally, the computer became so slow, it was useless. even typing became slow. i still did not know about the 'never uninstall quick time rule' yet, so i looked for the problem else where.
i opened up activity monitor, and there were no programs eating up cpu, nothing that suspicious. but when i switched activity monitor to show usage in a descending order, i saw kernel task was using between 500-700% cpu. my fans started running furiously and my battery life dropped in half. i would switch off the computer, start it with reset, things would go well for a half hour, then kernel would spike, the computer would get red hot and the fans would go as fast as propellers. since the kickstarter campaign i was working on was on deadline, i had to keep working. so i went out and bought a laptop stand that allows airflow under the computer and has its own fan to cool the computer, that worked for about a day. but since the fan on the stand ran on power from the usb of my computer, my battery life went from very good, to completely dead. nothing. accidentally unplug the cord for a millisecond second, and the computer turns off. when i restart, the time is set to the day and time i bought the computer, and would undo my internet, and i'd have to reset my whole connection.
i spent twelve straight hours, through the night, using recovery programs, like pacifist, stellar phoenix, and others, but could not get quick time back. finally (like 4 hours ago) i called apple, and although i have no warranty or apple care, they took my call and we tried some things, which didn't work.
i had already run disk utility and exhausted all other options. and i was told by apple that since my computer was preloaded (no discs) i could not, erase and reboot, which wasn't really an option anyway.
so apple being the best run company in the country, sends me a new down loadable version of imovie, quick time 7 and quick time ten.
it hasn't arrived yet, but how cool is that?
i have to say though, i'm a bit worried about reinstalling by disc and have no real guarantee that everything will return to normal.
not to mention my battery is dead and snow leopard gives you no way of getting to it. it has to be replaced at an official apple certified store.
so lesson here, never, ever, never, uninstall quicktime. i hope no one else makes this mistake.
thanx and good luck.

I recently changed my email on my apple account but the old email address is displayed when I go into iTunes or App Store not allowing me in.

I recently changed my email on my apple account but the old email address is displayed when I go into iTunes or App Store not allowing me to sign into my account. At some points it's a vicious circle because it asks for a password at key times when trying to correct the problem. Note that the new email address shows when I log into my Apple account and shows it was verified. For some reason the system isn't updating to the new email in ALL places.
I hope this is the right place to post this. Thanks!

Apple doesn't monitor here. Best we can do is to push you to contact Apple directly.
This is from the iOS Dev Center forum...
http://devimages.apple.com/maintenance/
We apologize for the significant inconvenience that our downtime has caused and encourage you to reach out to ourhttps://developer.apple.com/contact/ if you need any assistance.
(Check under "Program Enrollment").
Note that your program membership should have been automatically renewed if it lapsed during the downtime period. If not, please be explicit about that in your support request.
--- DrErnie

Using a second monitor as the primary display with MiniDisplayPort

I've got a new iMac, but the screen seems to be straining my eyes. I'm trying things like scaling the display, lowering brightness, changing desktop layout, etc, but if all else fails...I'd like to go back to my old external monitor.
So, my question is...if I connected this monitor to the MiniDisplayPort on the iMac, could I use it as a single primary display, or would I have to use it as mirrored or secondary?

Hi Brian,
Thanks for using Apple Support Communities. You can mirror the displays or make whichever display you want the primary in Extended Desktop mode. See this article for details:
How to use multiple displays with your Mac
http://support.apple.com/kb/HT5019
The white bar at the top of the left blue box represents the menu bar and determines which display is your primary display. To change your primary display, click the white bar and drag and drop it on the blue box representing the display you would prefer to be your primary display.
Cheers,
- Ari

How can I set up a second monitor using the DVI, a mini Displayport to dvi?

Hey guys,
In my office I'm trying to set up a mac with two displays, Samsung screensync sa450s, using a Startech MDP2DVIW mini displayport to dvi, and the DVI port found on the ATI Radeon HD 5770.
However, whichever monitor is plugged in through the mini displayport never shows video, and instead will just flicker sometimes, no matter which monitor I use, or which of the mini displayports i use. The system profiler recognizes both monitors, and has all of the specs on both monitors, but only the monitor connected directly to the DVI displays anything, even if it is the secondary monitor.
The StarTech does still work with the macpro that used to be in this spot, and the only salient distinction I can find is that the old computer has Mountain Lion, while the new one is still running Snow Leopard. Is this a case where we should just update the OS? or is there another fix?
I've also read online that many people have been not fully plugging in these mini displayports, so I'm worried that I'm doing that, but then I'd figure it wouldn't have worked when I plugged it into the old computer unless my predecessor had made some hardware adjustments.
Let me know.

A frequent solution to problems like the one you describe involves pushing in the Mini DisplayPort cable-end.
It should be inserted until essentially ALL of the metal end disappears inside the jack on the 5770 board.
Is this display wider than 1920 wide?
EDIT: The Startech MDP2DVIW adapter you cited is a passive adapter suitable for 1920 wide or less. You should be using ACTIVE adapters, about US$35. They cost a little more, but are much more trouble-free. The ACTIVE designation means they contain booster circuitry to raise the Voltage levels up to true DVI levels. The default converter produces good timing, but the signals are really low.

How can I migrate data from an old MBA to a new one without having access to the screen of the old one? The screen of the old MBA is damaged !

How can I migrate data from an old MBA to a new one without having access to the screen of the old one? The screen of the old MBA is damaged !

If your "older" MBA has a Thunderbolt port then it isn't that old. See Target Disk Mode about how it's used. Note that without a monitor you won't be able to tell from the screen when it has fully started, and if it succeeded in starting in TDM. If it did, then the hard drive should appear on the Desktop of your new computer. You can then access it to transfer your files. You can even use Migration Assistant or any backup utility to transfer data. Just don't try to transfer system files.

Monitor Speakers The old Tannoy Reveal 6 vs. Prokit 5 by KRK

Similar Messages

Maybe you are looking for