Monitor status is yellow for many days

Hi All,
I am extracting data from CRM and when I try to extract data for both master data objects and cubes, the monitor status is in yellow for many hours and not getting changed.
Result: data is not come to BW.
Observation:
1) In source system the job is not getting started for ALEREMOTE_CR user and always in ready mode.
2) In monitor screen in BW when I click on OLTP push button, system not allowing me to enter in to Source system and saying check the connection parameters. (Source system connection check is OK)
Kindly look in to this and feel free to contact me for any explanation is required.
Regards,
venkat.mahipathi
[email protected]
09886652422
Edited by: siva reddy on Jan 28, 2008 8:24 AM

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load).
5) SM58 and BD87 for pending tRFCs
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the new data table.
Thanks,
JituK

Similar Messages

The iPad says disabled connect to iTunes. When connected it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!

The iPad says disabled connect to iTunes. When connected to iTunes it says please enter passcode. There is no places for me to enter a passcode. This has been like this for many DAYS...not hours. HELP!

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

My photo booth in mac in not working for many days so please give me any suggestion to solve that problem......

My photo booth in mac in not working for many days so please give me any suggestion to solve that problem......
And my Airplort utility does't catch any other wireless devices please provide help....

fubar

I cannot close or import or any function to iphoto. I have been getting the same message for many days "Photos are being imported to the photo library. Please wait for import to complete." I do not know where the photos would be importing from.

I cannot close or import or any function to iphoto. I have been getting the same message for many days "Photos are being imported to the photo library. Please wait for import to complete." I do not know where the photos would be importing from. How do I get it to proceed?

After Force Quitting, as LarryHN recommended,
Select the iPhoto Library in the Finder. By default it is in your Pictures folder.
Ctrl-click or right-click the iPhoto lIbrary. Select "Show package contents" from the panel, that will pop up.
Look for a folder named "Importing" or "Import". Remove this folder, but don't touch anything else.
Then launch iPhoto again.
If iPhoto now is working again, check the folder you removed, if there are any photos that you want to keep and save them.

So i dont know if its just me, But my ( About a month old) I phone 5, keeps Shutting itself down, Then The sceen goes different colors and patterns and shuts off. Its been repeating this for many days and nothing i do seems to work!!! Help!!!!!

So i dont know if this is just me, cause none of my friends have this problem, But my i phone 5 about a month old, Keeps shutting itself down and then restarting, This is bothersome, cause i cant use it!!! Ive never dropped it got it wet, or anything to harm it! This thing is my baby!!! I hate this, Now its to the point where it doesnt even turn on! Ive charged it, Held the top and bottom buttons, ( It turns on but right back off) and basically anything else i could think of!! i even tryed to restore it. ( No luck) But especially what i think is odd, is when it turns off, it turns a bunch of random colors and designes. Im scared i might have to get rid of it!!! PLEASE HELP!!!
Sincerely Your New Bestfriend
Triston Conn

Please help

Server0 process in yellow and in status "starting apps" from many times

Hi to all,
platform windows/SQL
I have a problem , I just made a system copy of my BI-Java (NW 7.0 SR3 ) using database independent system copy method.
I make the export : all OK.
I make the import ( system copy tool sapinst ) : All ok without errors.
Now I'm tryng to start the Java ap server ( ABAP IS UP AND WORKS ) but it doesn't start : in MMC I see the java server0 process in yellow and in status "starting apps" from many times.
Please help , what can I do ?

I Eric ,
I waited , but still yellow :
here is the dev_server0 , it is very very long file so i post most important parts of the log
trc file: "F:\usr\sap\JBX\JC00\work\dev_server0", trc level: 1, release: "700"
node name   : ID5856350
pid         : 2460
system name : JBX
system nr. : 00
started at : Mon Nov 15 18:32:02 2010
arguments       :
       arg[00] : F:\usr\sap\JBX\JC00\exe\jlaunch.exe
       arg[01] : pf=F:\usr\sap\JBX\SYS\profile\JBX_JC00_sappino
       arg[02] : -DSAPINFO=JBX_00_server
       arg[03] : pf=F:\usr\sap\JBX\SYS\profile\JBX_JC00_sappino
[Thr 1676] Mon Nov 15 18:32:02 2010
[Thr 1676] *** WARNING => INFO: Unknown property [instance.box.number=JBXJC00sappino] [jstartxx.c   841]
[Thr 1676] *** WARNING => INFO: Unknown property [instance.en.host=sappino] [jstartxx.c   841]
[Thr 1676] *** WARNING => INFO: Unknown property [instance.en.port=3201] [jstartxx.c   841]
[Thr 1676] *** WARNING => INFO: Unknown property [instance.system.id=0] [jstartxx.c   841]
JStartupReadInstanceProperties: read instance properties [F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties]
-> ms host    : sappino
-> ms port    : 3901
-> OS libs    : F:\usr\sap\JBX\JC00\j2ee\os_libs
-> Admin URL :
-> run mode   : normal
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
Instance properties
-> ms host    : sappino
-> ms port    : 3901
-> os libs    : F:\usr\sap\JBX\JC00\j2ee\os_libs
-> admin URL :
-> run mode   : normal
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
-> [01] bootstrap_ID5856300 : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
-> [02] bootstrap_ID5856350 : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID5856300            : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
-> [01] ID5856350            : F:\usr\sap\JBX\JC00\j2ee\cluster\instance.properties
[Thr 1676] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 1676] JLaunchRequestQueueInit: create pipe listener thread
[Thr 2796] JLaunchRequestFunc: Thread 2796 started as listener thread for np messages.
[Thr 1116] WaitSyncSemThread: Thread 1116 started as semaphore monitor thread.
[Thr 1676] Mon Nov 15 18:32:03 2010
[Thr 1676] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 1676] CPIC (version=700.2006.09.13)
[Thr 1676] [Node: server0] java home is set by profile parameter
     Java Home: C:\JAVA_SDK_64BIT
[Thr 1676] JStartupICheckFrameworkPackage: can't find framework package F:\usr\sap\JBX\JC00\exe\jvmx.jar
JStartupIReadSection: read node properties [ID5856350]
-> node name          : server0
-> node type          : server
-> node execute       : yes
-> jlaunch parameters :
-> java path          : C:\JAVA_SDK_64BIT
-> java parameters    : -Djco.jarm=1 -verbose:gc -Djava.awt.headless=true -Dsun.io.useCanonCaches=false -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -XX:NewSize=341m -XX:MaxNewSize=341m -XX:MaxPermSize=192m -XX:PermSize=192m -XX:DisableExplicitGC -XX:PrintGCDetails -XX:+PrintGCTimeStamps -XX:SurvivorRatio=2 -XX:TargetSurvivorRatio=90 -XX:SoftRefLRUPolicyMSPerMB=1 -verbose:gc
-> java vm version    : 1.4.2_26-b03
-> java vm vendor     : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type       : server
-> java vm cpu        : amd64
-> heap size          : 2048M
-> init heap size     : 2048M
-> stack size         : 2M
-> root path          : F:\usr\sap\JBX\JC00\j2ee\cluster\server0
-> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> OS libs path       : F:\usr\sap\JBX\JC00\j2ee\os_libs
-> main class         : com.sap.engine.boot.Start
-> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path     : F:\usr\sap\JBX\JC00\exe\jstartup.jar;F:\usr\sap\JBX\JC00\exe\jvmx.jar
-> shutdown class     : com.sap.engine.boot.Start
-> parameters         :
-> debuggable         : no
-> debug mode         : no
-> debug port         : 50021
-> shutdown timeout   : 120000
[Thr 1676] JLaunchISetDebugMode: set debug mode [no]
[Thr 2372] JLaunchIStartFunc: Thread 2372 started as Java VM thread.
[Thr 2372] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
     Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack   : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djco.jarm=1
-> arg[ 4]: -verbose:gc
-> arg[ 5]: -Djava.awt.headless=true
-> arg[ 6]: -Dsun.io.useCanonCaches=false
-> arg[ 7]: -Djava.security.policy=./java.policy
-> arg[ 8]: -Djava.security.egd=file:/dev/urandom
-> arg[ 9]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 10]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 11]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 12]: -XX:NewSize=341m
-> arg[ 13]: -XX:MaxNewSize=341m
-> arg[ 14]: -XX:MaxPermSize=192m
-> arg[ 15]: -XX:PermSize=192m
-> arg[ 16]: -XX:+DisableExplicitGC
-> arg[ 17]: -XX:+PrintGCDetails
-> arg[ 18]: -XX:+PrintGCTimeStamps
-> arg[ 19]: -XX:SurvivorRatio=2
-> arg[ 20]: -XX:TargetSurvivorRatio=90
-> arg[ 21]: -XX:SoftRefLRUPolicyMSPerMB=1
-> arg[ 22]: -verbose:gc
-> arg[ 23]: -Dsys.global.dir=F:\usr\sap\JBX\SYS\global
-> arg[ 24]: -Dapplication.home=F:\usr\sap\JBX\JC00\exe
-> arg[ 25]: -Djava.class.path=F:\usr\sap\JBX\JC00\exe\jstartup.jar;F:\usr\sap\JBX\JC00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
-> arg[ 26]: -Djava.library.path=C:\JAVA_SDK_64BIT\jre\bin\server;C:\JAVA_SDK_64BIT\jre\bin;C:\JAVA_SDK_64BIT\bin;F:\usr\sap\JBX\JC00\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;c:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;F:\usr\sap\JBX\SYS\exe\uc\NTAMD64
-> arg[ 27]: -Dmemory.manager=2048M
-> arg[ 28]: -Xmx2048M
-> arg[ 29]: -Xms2048M
-> arg[ 30]: -Xss2M
-> arg[ 31]: -DLoadBalanceRestricted=no
-> arg[ 32]: -Djstartup.mode=JCONTROL
-> arg[ 33]: -Djstartup.ownProcessId=2460
-> arg[ 34]: -Djstartup.ownHardwareId=M1883233260
-> arg[ 35]: -Djstartup.whoami=server
-> arg[ 36]: -Djstartup.debuggable=no
-> arg[ 37]: -Xss2m
-> arg[ 38]: -DSAPINFO=JBX_00_server
-> arg[ 39]: -DSAPSTARTUP=1
-> arg[ 40]: -DSAPSYSTEM=00
-> arg[ 41]: -DSAPSYSTEMNAME=JBX
-> arg[ 42]: -DSAPMYNAME=sappino_JBX_00
-> arg[ 43]: -DSAPDBHOST=SAPPINO
-> arg[ 44]: -Dj2ee.dbhost=SAPPINO
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
[Thr 2372] Mon Nov 15 18:32:04 2010
[Thr 2372] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 3844] Mon Nov 15 18:32:07 2010
[Thr 3844] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 3844] Mon Nov 15 18:32:08 2010
[Thr 3844] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 3844] Mon Nov 15 18:32:09 2010
[Thr 3844] JLaunchISetClusterId: set cluster id 5856350
[Thr 3844] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 3844] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
Mon Nov 15 18:33:09 2010
66.769: [GC 66.779: [DefNew
Mon Nov 15 18:33:12 2010
: 174592K->12719K(261888K), 2.4968787 secs] 174592K->12719K(2009856K), 2.5007114 secs]
Mon Nov 15 18:33:28 2010
85.012: [GC 85.019: [DefNew
Mon Nov 15 18:33:31 2010
: 187311K->15802K(261888K), 2.9950002 secs] 187311K->15802K(2009856K), 2.9962968 secs]
Mon Nov 15 18:33:42 2010
99.362: [GC 99.363: [DefNew
Mon Nov 15 18:33:43 2010
: 190394K->18114K(261888K), 1.3817075 secs] 190394K->18114K(2009856K), 1.3817727 secs]
Mon Nov 15 18:34:04 2010
121.270: [GC 121.270: [DefNew: 192706K->22709K(261888K), 0.4353252 secs] 192706K->22709K(2009856K), 0.4354424 secs]
Mon Nov 15 18:34:14 2010
131.077: [GC 131.079: [DefNew
Mon Nov 15 18:34:15 2010
: 197301K->29493K(261888K), 0.9813876 secs] 197301K->29493K(2009856K), 0.9823920 secs]
[Thr 3344] Mon Nov 15 18:34:36 2010
[Thr 3344] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
Mon Nov 15 18:34:44 2010
160.965: [GC 160.966: [DefNew
Mon Nov 15 18:34:47 2010
: 204085K->40068K(261888K), 3.8189779 secs] 204085K->40068K(2009856K), 3.8194810 secs]
[Thr 3532] Mon Nov 15 18:34:54 2010
[Thr 3532] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 4932] Mon Nov 15 18:34:57 2010
[Thr 4932] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
Mon Nov 15 18:35:09 2010
186.312: [GC 186.315: [DefNew: 214660K->44513K(261888K), 0.4742509 secs] 214660K->44513K(2009856K), 0.4773469 secs]
[Thr 3844] Mon Nov 15 18:38:32 2010
[Thr 3844] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
Mon Nov 15 18:39:18 2010
435.575: [GC 435.576: [DefNew: 219105K->48184K(261888K), 0.2394759 secs] 219105K->48184K(2009856K), 0.2397480 secs]
Mon Nov 15 18:39:20 2010
Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.TypeMappingImpl::initializeRelations
Mon Nov 15 18:39:23 2010
440.506: [GC 440.506: [DefNew: 222776K->50686K(261888K), 0.1335379 secs] 222776K->50686K(2009856K), 0.1335965 secs]
Mon Nov 15 19:42:07 2010
[Unloading class sun.reflect.GeneratedMethodAccessor14]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor127]
[Unloading class sun.reflect.GeneratedMethodAccessor13]
[Unloading class sun.reflect.GeneratedMethodAccessor105]
[Unloading class sun.reflect.GeneratedMethodAccessor99]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor135]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor4]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor96]
[Unloading class sun.reflect.GeneratedMethodAccessor128]
Mon Nov 15 19:42:08 2010
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor17]
[Unloading class sun.reflect.GeneratedMethodAccessor119]
[Unloading class sun.reflect.GeneratedMethodAccessor64]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor29]
[Unloading class sun.reflect.GeneratedMethodAccessor47]
[Unloading class sun.reflect.GeneratedMethodAccessor86]
[Unloading class sun.reflect.GeneratedConstructorAccessor72]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor14]
[Unloading class sun.reflect.GeneratedMethodAccessor109]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor82]
[Unloading class sun.reflect.GeneratedMethodAccessor156]
[Unloading class sun.reflect.GeneratedMethodAccessor147]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor94]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor65]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor93]
Mon Nov 15 19:42:09 2010
[Unloading class sun.reflect.GeneratedMethodAccessor107]
[Unloading class sun.reflect.GeneratedMethodAccessor142]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor2]
Mon Nov 15 20:19:06 2010
: 1488916K->1046521K(1747968K), 3204.1629115 secs] 1749638K->1046521K(2009856K), 3204.1631834 secs]

I have a L7680 All in with two new print heads but the new cyan/magenta shows yellow monitor status.

I have a L7680 All in with two new print heads but the new cyan/magenta shows yellow monitor status. Ink status, cyan more than 50% and magenta is a 25% w/no low ink warnings... Just ran a clean print head again, print out looks good now but the status of the new cyan/magenta shows yellow monitor status. Is it time to buy another..When I purchased this printer it had to be replaced 3 times because of problems... Just a lemon?
thx for your help in advance...
Jim

Could you share a link to the page?
Seeing it in context and in our browsers is much easier to debug.
If not, make sure to run the validator here The W3C Markup Validation Service and clear out any problems. HTML errors, especially structural ones, will cause all kinds of display problems in various browsers/versions/platforms.

REQUEST STATUS YELLOW WHILE MONITOR STATUS GREEN - BI7

Hellow,
I try to load data with 0CO_OM_OPA_1, 0CO_OM_WBS_1 into Z cubes which are similar to the business content cubes 0OPA_C11 and 0WBS_C11 respectively.
ETL is BW3.5 (transfer rule and update rules). When I look at the request in the monitor, I see that everything is green but the request status is yellow and not available for reporting. I can change the status to green manually but this is not a good solution for me.
By the way the same load works well with te standart cubes.
I use BI7 but I use BW3.5 business content.
What could be the reason for such problems?
Regards,
Hadar

Hi Hadar,
We have exactly the same proble. Have you found a solution to it? I'm using Datasource 0HR_PT_2 to load data into Infocube ZPT_C01 (a copy of 0PT_C01). The monitor of the infopackage is green. There are no errors whatsoever. The status for the request in the Infocube>Manage is set to yellow and the data is not available for reporting. I can set it manually to green, but as you said yourself, it'd be nice to have an automated wway of doing this. Is there any way around this problem?
Thanks
Michalis

How many days have you waited for approval?

I have waited for 10 days. Still "Not on 32 stores" status for all the books I uploaded.
How many days have you waited before you get your books approved? Does the status ever changed to say "Under Review"? Will you received an email when your book get approved?
Thanks!

OK, I finally have 1 book - out of 8 submitted approved. So I finally have answers to my questions - hope it help others too!
How many days have you waited before you get your books approved?
- in this case, about 11 days. Would say 2 weeks is a good bet.
Does the status ever changed to say "Under Review"?
- no. It just turned the red ligh to green, and show "On 32 stores".
Will you received an email when your book get approved?
- no.
Now I still looking for the answer of: can the book get updated once approved? I just submitted a major revision (and grow the book from 70+ pages to 100+ pages) and see whether this will get updated. It goes through fine in iTunes Producer.

Hi Dude, I ve seen all the threads from first to last even am gonna geta iphone 4s from Thailand. Would like to know which sim will be working fine in chennai as you all are using d phone for past many days??? Is it advisable to buy a phone

Hi Dude,
I ve seen all the threads from first to last even am gonna get a iphone 4s from Thailand. Would like to know which sim will be working fine in chennai as you all are using d phone for past many days??? Is it advisable to buy a phone from abroad.

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

Group Policy for Outlook Option: "Mark Messages as expired after this many days"

In Outlook, there is a option where you can have Outlook "Mark Messages as expired after this many days". If you enable this option, you fill in a number of days when Outlook will mark the message as expired. The default is 180 days.
The option is located under FILE -> Options -> Mail -> Send Messages.
Does anyone know how to enable this setting via Group Policy? I can't find it.
Thanks!

Hi,
Do you have the
Office 2010 Administrative Templates loaded? If so, we can find the GPO setting under:
Administrative Templates > Microsoft Outlook 2010 > Outlook Options > Preferences > E-mail Options > Advanced E-mail Options
Double click "When sending a message" setting, select Enable bullet. Now, you can specify the "Messages expire after (days):" option.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

STATUS YELLOW FOR REQUEST

Hai all
I am getting status yellow for request in bi after scheduling info package ( after migeration of data source)
and in short dump of dataware house work bench I am getting following error : CONNE_IMPORT_WRONG_COMP_TYPE
EXCEPTION :CX_SY_IMPORT_MISMATCH_ERROR
AND TEXT OF ERROR AS ( ERROR WHEN ATTEMPTING TO IMPORT OBJECT " HIST2 " )
THANKS
CHAITHANYA

Hi,
Check is there any Start/Individual routines(ABAP) are there? Usally i occurs when exception raise.Try to debug the update rule solve your problem.
Regards,
Saran

My imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I've

my imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I’ve tried shutting it down and unplugging it, and that does not work -- I’ve run disk utilities checked permissions, and run anti-virus and get no adverse results – I cannot figure out what is different that causes this problem

From previous experience 3 indicates a shutdown initiated by the SMC (System Management Controller) — hardware responsible for many low-level functions including power, sleep, lights, and fan activity.
Try resetting it:
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.

Trial period for adobe cs6 is how many days?

I have install trial for Photoshop CS6 on 2nd June 2014 and today it shows 0 days remaining. trial period for adobe cs6 is how many days?

Adobe trial software expired early
Mylenium

Status remains as Yellow, for no data

hi ,
in our master data load process chain, a datasource which has 0 records in the sourcesystem returns 0 records in BI. but the status remains as yellow , instead of green.
since the status is yellow the next process is not getting triggered. only if we manually change the status to green, the process chain continues. wht shall we do to change the status to green automatically.

Hi DOLLY,
you need to cofigure a small setting at Infopackage for this.
RSA1-> infopackage -> scheduler -> Trafic light color for Empty request -> select green and save it.
for 0 to 0 records load will show as Green.
Regards
Daya Sagar

Monitor status is yellow for many days

Similar Messages

Maybe you are looking for