Monitor turns off when power is disconnected

Hi,
I have just recently purchased a new 15" Intel Macbook Pro.
I seem to be having problems with having an LCD monitor connected to it, and then pulling the power to the macbook.
The LCD monitor (Dell 22") turns off and I have to reboot the mac for it to come back onto the Dell.
Is this a known issue ? or is there a battery saving setting that turns off the DVI port or something ?
Any ideas would be appreciated.
Thanks in advance.
Phill

Thanks for the reply David.
It could be, we do have a few of them here, all of which are using the same dells, and I think they all have the same issue.
When running on power initially, it works fine, then if power is pulled, 22" LCD goes blank (power saving mode) - and you can then only use the Macbook screen.
However, when you lift the macbook lid and the desktop appears - the 22" Dell resumes - but as a secondary screen.
Very odd...

Similar Messages

  • Pavilion dv6- turns off when power cord removed

    There's a certain way I can unplug it where it doesn't shut off- but 99% of the time when the adapter is pulled out it shuts off. Has a new battery that shows 100% charged, and lasts a good hour if I can get it to stay on when unplugged. ONce it shuts off, it only comes back when the adapter is plugged in. Do I replace the adapter, battery (again), or something else?

    Hi @SavannahsDad 
    Welcome to the HP Support Forums!
    I understand that your notebook turns off when the cord is unplugged. I am happy to assist. If the battery is showing as fully charged whenever you do this it almost sounds as if there is a bad connection between the battery and the notebook.
    Here are some things you can look at for now.Computer Does not Start (Windows 7, Vista, XP)
    AC Adapter Battery Charging Indicator LED Does Not Display Immediately When Plugged In
    Battery Charging Is Not Indicated in Vista or Charging LED Does Not Turn On
    Improving Battery Performance (Windows 8, 7, Vista)
    Let me know if any of that is useful to you, or if you see any other symptoms.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Powerbook turns off when power disconnected

    I have a 3 week old Powerbook G4 (new model.)
    Today its developed the problem where if you disconnect the mains
    supply it completely turns off, even though the battery is charged.
    When I plug it back in and turn it on I get the warning that my clock
    needs resetting.
    Obviously I will contact Apple support but thought I'd try on here
    first incase its something easy to fix
    Any help appreciated
    Paul

    Hi Paul --
    I agree, a call to Apple support and perhaps a trip to your local Apple Store Genius bar or Apple Authorized Service provider would appear to be in order.
    The only things I can think of for you to try in the interim is to reset your PB's Power Management Unit and your PRAM. Here's how
    http://docs.info.apple.com/article.html?artnum=14449 ;
    http://docs.info.apple.com/article.html?artnum=2238
    I don't have much hope that these procedures will fix things, but it is likely that the support people will ask you to do them in any event as part of their troubleshooting procedures.
    Good luck and post back what happens.
    -- JDee

  • Monitor turns off when connected to USB or Firewire port

    I just purchased a used Mac Mini Core 2 Duo and have a 20" Apple flay display with USB & Firewire ports.  When I connect either of the USB or Firewire cables from the display to the Mac Mini, the display goes off.  Is this some kind of short?  Or is there some setting that causes this?

    Hi Vasant! You appear to be located in India. Please reach out to our colleagues at Sony India here for best assistance with your Sony Digital Voice recorder. Thanks! 
    If my post answers your question, please mark it as "Accept as Solution"

  • How do I turn off the Power button Lockout on my HPw1858 monitor?

    How do I turn off the Power button lockout on my HPw1858 monitor?
    This question was solved.
    View Solution.

    Hi,
    Power Button Lockout is displayed.
    The monitor's Power Button Lockout function is enabled.
    Press and hold the Power button for 10 seconds to unlock the Power button function.
    If the above doesn't work then try a monitor reset.  Unplug the monitor’s power cord and hold down the monitor’s power button for 30-60 seconds. Plug the monitor back in and power it up.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Bought an iPod nano for use in an external source to the unit of the BMW. It works, but don't remember the place when you turn off the power and every time begins to play the playlist first.

    Bought an iPod nano for use in an external source to the unit of the BMW. It works, but don't remember the place when you turn off the power and every time begins to play the playlist first.

    Thanks iPod Whisperer--
    I do realize that the nano will resume where I left off in my audiobook if I reload the file that was last playing.
    What I was hoping is that the 6g nano would work like my previous iPods and default to the last file played the next time played after Iused sleep mode instead of going to some random song on the iPod.
    Since I usually have a lot of audiobooks on my iPod--and most of those have 10-15 files in them, it's a pain to have to navigate to the correct file (and try to remember which of the 10-15 files I was last playing). On all my other iPods I could simply hit play and it would start up in the audiobook right where it left off.
    Note--this only happens if I use the sleep timer to turn off the iPod. If I pause the book myself, when I turn the iPod back on it'll "remember" what file it was playing.
    Hope this makes sense.
    dordale

  • HT3986 I was about to remove my Win7 with BootCamp but suddenly I ran out of power & my MacBookPro turned off , when I began again I saw that the space that I had for my Win7 has been blocked & I have no access to that, what shall I do now? :-l

    I was about to remove my Win7 with BootCamp but suddenly I ran out of power & my MacBookPro turned off , when I began again I saw that the space that I had for my Win7 has been blocked & I have no access to that, what shall I do now? :-l
    thanks

    I hope you are able to solve your problem. The iPhone is definitely designed to be able to run the power all the way down. In fact, the instructions to maintain your battery suggest doing that once a month. I do it now and then, not usually once a month and I am always able to get my phone back to where it would be usable in about 10 minutes of charge. I always keep it in the charger until it is fully charged, however.
    I just didn't want you to think you made some big mistake to let it run out of charge. There must be something going on with your phone or the battery.

  • MBP display turns off when external monitor is attached

    Hi there,
    Over the last few days I have been trying to get Windows 7 to work with an external monitor. I am running a Mid 2012 15" Macbook Pro with a Nvidia GeForce GT 650M GPU. I sucessfully installed windows 7 in bootcamp and everything worked flawlessly until I try to connect my monitor with the mini displayport via a VGA <-> Displayport adaptor. When I connect it the monitor powers on, with the windows desktop and is responsive but the mouse dissapears and the MacBook Pro's monitor turns off. The mouse is still useable but invisible, so its very difficult to do anything. I have tried to update the Nvidia drivers as well as  trying everything I can think of and haven't been able to  find a solution. Has anyone else out there exerinced this, or found a solution?

    Okay, so a little update. I have determined that the problem is the nvidia driver. When I roll back the driver to the "Microsoft Basic Display Adaptor" driver and connect the monitor then it behaves as excpected. The external monitor isn't detected and everything continues to work properly.
    So is there anyone out there who is running a Mid 2012 15" MacBook Pro with an external monitor in either Windows 7 or 8.1? If so please let me know what your setup is and what driver version you are using. This is driving me crazy. Thanks.

  • When I turn off my ipod and put it away, generally in my cargo pants pocket, it turns on again, draining the battery...HOW DO I SHUT IT OFF? I tried turning off the power completely, but it reboots

    When I turn off my ipod and put it away, generally in my cargo pants pocket, it turns on again, draining the battery...HOW DO I SHUT IT OFF? I tried turning off the power completely, but it reboots

    Try restoring it.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • I have lost my iphone and the power was turned off when i lost it and i dont have find my iphone installed what can i do?

    I have lost my iPhone 4s and i had it turned off when I laid it down somewhere and I have not installed the find my iPhone app. Is ther anyway possible to locate it.

    Nope.  If you didn't have find my iphone turned on, you will not be able to locate it.  File a police report, and contact your carrier.
    http://support.apple.com/kb/HT5668

  • Monitor turning off strangely

    Hello folks,
    I'm having a strange issue with a computer I use as a media center. XFCE4 running on Arch. Everything works great except for the fact that the monitor turns off at random. It's not frequent, but once every 10-20 minutes it will happen. Now the weird thing is that the video playback continues, when I move the mouse the monitor wakes up and the video has been playing.
    I even tried power settings where nothing ever turns off, but it doesn't seem to help.
    Any ideas or similar problems?

    I can think of 2 options.
    One is the screensaver...
    The other is your dpms settings.   I have in my ~/.xresources file
    xset -dpms s off &
    to turn it off.
    HTH

  • IBook randomly turns off *when plugged in,* how long can my iBook last me?

    O Sages of Mac Wisdom,
    Help! I've been Googling and looking at forums all over the place for help. I have seen many posts about other iBooks shutting off randomly when they are on battery power, but have not seen any that answered questions about iBooks turning off when they are plugged in. It happened four times in the span of two and a half weeks and has stopped (no incidents for the past two weeks). I have reset my PRAM and PMU. Why would it be turning off on its own when it is plugged in?
    Second question: my battery only lasts for about a 45 minutes from a 99% charge. Here's the information on it:
    Battery Information:
    Charge Information:
    Charge remaining (mAh): 1438
    Charging: Yes
    Full charge capacity (mAh): 1544
    Health Information:
    Cycle count: 95
    Battery Installed: Yes
    Amperage (mA): 934
    Voltage (mV): 12508
    I bought a new battery from ifixit.com, rated at "good" condition, and it will last for an hour until it gets to 75%, then drops down to 0% in five minutes and the iBook goes to sleep. It could be just that they gave me a crappy one, but here's the information on it anyway:
    Battery Information:
    Charge Information:
    Charge remaining (mAh): 5236
    Charging: Yes
    Full charge capacity (mAh): 5804
    Health Information:
    Cycle count: 91
    Battery Installed: Yes
    Amperage (mA): 962
    Voltage (mV): 12511
    Thoughts?
    Final question: I have some extra money now, and I won't after July, when I'm done with my MA and have to break down and find an actual job (also won't have the Ed Discount after July). I want to get the most out of this iBook, but I also don't want to be screwed in a year or two and not be able to afford a new computer. In other words, do you have any estimate on how much more mileage I can get out of this one? Any past experiences anyone has had would be helpful!

    Hey steck and Welcome to Apple Discussions,
    Why would it be turning off on its own when it is plugged in?
    Have you been on the machine when this happens? Are there any unusual symptoms when this happens?
    Next:
    Download Temp Monitor here and run it:
    http://www.bresink.de/osx/TemperatureMonitor.html
    report back
    There could also be a DC in board problem or a PMU problem.
    Battery problem:
    Charge Information:
    Charge remaining (mAh): 1438
    Charging: Yes
    Full charge capacity (mAh): 1544
    That's about a third of what it should be.
    The ifixit battery:
    Charge remaining (mAh): 5236
    Charging: Yes
    Full charge capacity (mAh): 5804
    That one should run it for 5 hours. It could be bad.
    Did you calibrate it when you got it?
    http://support.apple.com/kb/HT1490
    In other words, do you have any estimate on how much more mileage I can get out of this one? Any past experiences anyone has had would be helpful!
    Well with your current situation, there is a big question mark. However I use and continue to use a 14" 1.2 iBook and feel very confident in it. Mostly I know the problems that can occur and have repaired all of them myself. I also repair and donate them to inner city school teachers, since I can get good deals on broken ones (or they're donated).
    Sort of like this:
    http://www.lowendmac.com/ed/herlihy/09ph/ibook-netbook.html
    Richard
    Message was edited by: spudnuty
    Message was edited by: spudnuty

  • Wifi turns off when screen turns off

    Hi all.  I noticed that my wifi turns off when my screen turns off (to save energy) on my brand new rMBP.  The mac isn't asleep, just the screen as I have specified in the settings to turn off but the actual laptop is still on.  Well when I move the mouse or press a key, the screen naturally comes on right away but I noticed that wifi turns on and reconnected.  So if I was streaming music or something, it would stop and disconnect when the screen goes off.  Does this make sense?
    How do I disable this?  I don't want my wifi to turn off at all when my screen turns off.  If I'm downloading/streaming or whatever, I want my connection to remain on.  Thoughts?

    edit:
    i know there's the option "prevent computer sleeping when screen is off" under power adpter, but i would like it done while running battery.
    thank you.

  • M93p dual monitor problems; monitor turns off and cannot be turned on again

    Hi,
    we have multiple M93p tiny computers causing problems in dual monitor setup (VGA / Displayport->DVI). Our users (already >5)  keep telling us, they leave their workplace, return, then DVI attached monitor if off and they do not find a way to turn it on. This is true; the only workaround that has been found by our users is to bring Win7/32bit into standby mode and awaking it again.
    Needless to say, we turned all windows energy saving options off (computer standby/hibernate, monitor turn off). Still the problem appears.
    Maybe there is something wrong with DVI power/DVI signal?
    - Monitor independent, as far as I can see
    - Independent from Windows energy saving modes
    - BIOS updates did not help
    [todo]: Try Intel/(AMD?) drivers, let users test.
    I haven't seen exactly when the monitor turns off because it is reported by users. I had a testing machine, but was not able to reproduce.
    http://forums.lenovo.com/t5/A-M-and-Edge-Series-Th​inkCentre/Dual-monitors-problem-VGA-and-Displaypor​... is related.
    Anyone?
    Thx

    Make a "Genius" appointment at an Apple Store to have the machine tested.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

  • I own an iphone 3gs and it just turns off when it wants, like when its loading something? does anyone know whats the problem?

    i own an iphone 3gs and it turns off when it wants even if the phone is 100% battery, its when the phone is loading something. does anyone know my problem

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for

  • Finding objects in arrays, adding to a temp array and replace old with temp

    hi, I am currently modifying a hand analyser for a poker game. imagine a hand of a set of cards that can be from 5 up to whatever the game instructs, the analyser then has to match the hand to the rankings of best hands. so it has to map the hand to

  • How can I remove the preceding blank lines in the downloaded text file?

    I have created a jsp that writes to a file and then prompts a dialog box to have an option to view or save the file. However when i view the file, there are blank lines before the actual content of the file. How can i remove these lines? Below is par

  • Adjustment Brush/Saturation

    Normally I can reduce the color saturation to zero in parts of my photo by using the adjustment brush with the amount set to -100.  Today this is not working...I'm not sure if I've changed some settings but if someone could please help me get it back

  • Quick report on contract monitoring

    Hello All, i wanted to extract any what are materials  have more than contracts  with same vendor? output expected material 1234 contract 560001 vendor ABC material 1234 contract 560002 vendor ABC any help is appreciated br muthu

  • Weblogic 6.1 deployment out of memory error - please help

    I am getting an out of memory error when deploying an ear to a weblogic 6.1 server. I tried increasing heap size with the startup param. I also tried upgrading the jdk to 1.3.1_02. Here is how I am starting weblogic - "%JAVA_HOME%\bin\java" -hotspot