Monitor turns on. Says it's not connected to anything then goes to sleep.

I was on my computer and monitor perfectly fine. Then I moved my desk un-plugged all of my equipment and moves that too.. I plugged my monitor in and my computer in just like it was 5 minutes prior. Now when I try to turn my computer on it works fine but when I turn my monitor on it says no connection then goes into sleep mode any tips?

UPDATE: I tried a different monitor and 2 more different cords and neither worked.. It's a computer problem

Similar Messages

  • I did an update to my wife's iPhone and now it won't connect through the 3G. It says you are not connected to a cellular data service

    I Updated my wife's iPhone the other to the new operating system. It asked me first to use iCloud backup so I did. After the update was complete my wife can use wifi but when we try the 3G it says you are not connected to a cellular data service.
    IT shows Bell as the provider but we seem to have lost something during this update.
    can someone help me please.

    Check Settings>General>Cellular and make sure Cellular Data is set to On.  If it is, try putting it in Airplane mode for 15 seconds, then turn Airplane mode off again.  If it persists, give you carrier a call to confirm that it's properly activated with them and that your data plan is properly provisioned.

  • I just recently downloaded iTunes and whenever I try to access the store It says "iTunes could not connect to the iTunes Store. An unknown error occurred (0x80096004)

    I just recently downloaded iTunes and whenever I try to access the store It says "iTunes could not connect to the iTunes Store. An unknown error occurred (0x80096004). I have windows xp and it's running on service pack 2. I have downloaded and redownloaded iTunes many times. I'm getting very frustrated!  Please help!

    I have the same error for Windows Vista.  I read all the community posts and followed the suggested fixes including numerous uninstalls and installs, clearing cache, choosing various SSL TL options, turning off all spyware and nothing has worked.  My internet works fine for all my other programs so not sure what is going on with Itunes.  I will not buy anymore products through
    Apple Itunes.

  • Safari5.1.8 drops off line, but airport stays connected, but window says you are not connected to internet?

    safari5.1.8 drops off line, but airport stays connected, but window says you are not connected to internet? then a couple minutes later it reconnects. I am on an AT&T wireless.

    my mac G4 does not have any problem with this. suspect it is safari, airport never drop off or turn off, just safari

  • My ipad says I am not connected to the internet

    My ipad says I am not connected to the internet and I am. Have you any suggestions for a quick fix. I am not yet proficient with my ipad. It was a Christmas present.

    1. Turn router off for 30 seconds and on again.
    2. Settings>General>Reset>Reset Network Settings.

  • I have an macbook air and i cannot connect to the app store. It says i am not connected to the internet but i am?

    I have a macbook air and i have been unable to access the app store since i have gotten the laptop which was 11 weeks ago. It says i am not connected to the internet but i am also because i am unable to connect to the app store i cant receive any updates.

    1.Power Cycle
       Power off the router. Unplug it from the wall. Wait a while.
       Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
       It will take a while.
      Restart the computer.
      Start up in Safe Mode.
       http://support.apple.com/kb/PH11212?viewlocale=en_US
    2.  Turn off Extensions, if any.
         Safari > Preferences > Extensions
    3. Turn off proxies, if selected.
         System Preference > Network > Advanced  > Proxies Tab
         Under "Select Protocol", uncheck any box if selected.
         Click "OK" then  "Apply"
    4. Uninstall anti-virus software, if any.
    5. A new Mac comes with 90 days of free tech support from AppleCare.
        AppleCare: 1-800-275-2273

  • I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad

    I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • I just purchased an Novella MiFi  ~ I have an Ipad 2 wifi only.  My ipad will recognize the device, but when I try to connect, is says I am not connected. Suggestion?

    I just purchased an Novella MiFi  ~ I have an Ipad 2 wifi only.  My ipad will recognize the device, but when I try to connect, is says I am not connected. Suggestion?

    Getting connected to a mifi the first time was goofy for me as well.  The message you are getting means you have not satisfied the security on the my yet.
    On mine, when I set it up, I had to declare a password.  But it never recognized that password for connecting devices.  Turns out the password was only used for changing system settings.   When connecting a device what it really wanted was the device code, similar to a router key- not your password.   So look through the paperwork and find the key, and try that.
    I think you mean novatel, who make a number of mifi units. 

  • My printer is saying that its not connected to the internet How do i fix this

    My printer is actting funny...Yesterday i printed my son a picture off the apps on the printer but now its saying that its not connected to the internet but it was just working fine yesterday i have a hp officejet 6500A Any help would be greatly appriciated

    hello javy,
    first i would like to ask does this happen with all apps on the printer or just the one apps you used previously ?
    Also i would suggest Resetting the router that the printer is connected to and Also Power cycle the printer,
    In order you would go to the Printer and turn it off, and then turn the power of the router off,, wait about 15-20 seconds and then turn the Router back on, Wait for all the lights to come back on and then what you would want to do is turn the printer back on,, basically what this does  is refresh the connection from the printer to the router itself
    I am an HP employee.
    __ if this Solution has helped Please Mark as Resolved and feel free to Provide a Kudos__

  • IPhone says I'm not connected to the internet?

    Ever since I updated to 7.1.2 on my iPhone 4 it's been terrible. At first the update didn't finish successfully, so I had to restore the phone in order for the update to go through.
    And now even though it displays that I have 3G, it says I'm not connected to the internet.
    My wifi detection is a lot weaker than it was before this update, now it will only recognize my router and nothing else.
    I've tried restarting the phone, turning off and on airplane mode, and reset the network settings and still nothing has improved.
    I would really appreciate it if someone knows a fix to this problem.

    Try this:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Use recovery mode
    You might need to use recovery mode to restore your device in these cases:
    iTunes doesn't recognize your device or says it's in recovery mode.
    You see the Apple logo onscreen for several minutes with no progress bar.
    You see the Connect to iTunes screen.
    Learn what to do if you see the progress bar onscreen for several minutes.To put your device into recovery mode, follow these steps:
    Turn off your device and leave it off.
    Plug in your device's USB cable to a computer with iTunes.
    Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
    When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
    When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
    Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.

  • Adobe creative cloud say i'm not connected to the internet, but I am

    adobe creative cloud says i'm not connected to the internet, but I am

    If you statee more aout your set up about your relation to the Cloud a l9ittle of the history something to go on right now tht is believe it or not ptretty vague.
    i do not relly particfipate in the forum but I doubt that the other users will have an easytime helping you without more informtion.
    Offhand I wouuld say it was a permissions issue fwiw.

  • My Ipad 2 says its connected to my wifi but when i try to go ontofacebook it says I cannot connect and when i try on safari it says I am not connected to the internet. Yet on settings it says I am. Any help?

    I recently got an IPad 2 and when I first set up the wifi connection the safari and facebook worked but suddenly whenever  I  attempt to get onto facebook it says Unable to connect and whenever I go on safari it says I am not connected to the internet. yet when I go on settings-- Wi-fi The network I should be cnnected with is ticked and it says I have connection, but once i try to go on the internet I have the same problem. Is there a way I can solve this by resetting or do I need to go into the apple shop to get it sorted. Any help? Thanks.

    I recently got an IPad 2 and when I first set up the wifi connection the safari and facebook worked but suddenly whenever  I  attempt to get onto facebook it says Unable to connect and whenever I go on safari it says I am not connected to the internet. yet when I go on settings-- Wi-fi The network I should be cnnected with is ticked and it says I have connection, but once i try to go on the internet I have the same problem. Is there a way I can solve this by resetting or do I need to go into the apple shop to get it sorted. Any help? Thanks.

  • I downloaded Pandora to my iPOD and then my wifi quit and had to be restored and now i can't open Pandora. It says it is not connected to the internet.

    I downloaded Pandora to my iPOD and then my wifi quit and i had to restart it and now Pandora says it is not connected to the internet. How do I get it reconnected?

    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears
    - Power off and then back on the router
    - Reset Network Settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • When I try to  upgrade to version 4 on my i pod when synced it says i am not connected to the internet yet I am any ideas pleaseas

    Can anyone help I cannot upgrade my I pod touch from version 3 as when i try on the update available prompt box
    it says i am not connected to the internet yet i am???

    Try disabling any firewall or anti-virus software you may be running on your PC when you attempt to do this.

  • My wireless all in one says it is not connected to my computer and yet it prints just fine. can't sc

    I cannot scan, the error message says I am not connected to a computer and yet I am able to print from my  computer.
    Why would it then be saying that I am not connected to my computer??

    What operating system? What router?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for

  • EPM Formatting Sheet Issue - Right click on the cell and lock the cell

    Dear Experts, I have come across an issue. Earlier I worked on BPC NW 10 integrated with Ms Excel 2007. I applied a feature of locking the cell linked with specific member in Input Template and Report by going to EPM Formatting Sheet, selecting dimen

  • Business Place & Section Code in J1INMIS

    In F-48 Business Place and Section Code are entered.  Even then, in J1INMIS Section Code is missing and not seen in the report.  Only Business Place is coming.   What could be the reason?

  • Unable to run ISE Backup

    Hello All If  I run a backup on ISE it fails with the Message of Insufficient disk space. Actually a dir shows plenty of disk space available. Any Idea what problem it could be ? Thanks Thomas # backup Daily_ISE repository bkp_apzhnise01 encryption-k

  • "Access denied. Login again" when creating New Configuration in Object Edit

    Hi all, I am trying to complete ]<a href="http://help.sap.com/saphelp_nw70/helpdata/en/43/8d77556536267fe10000000a1553f7/content.htm">My First Composite Application</a> but got stuck at the step <a href="http://help.sap.com/saphelp_nw70/helpdata/en/4

  • Estimated time for iTunes 9.1.1 download is 26 hours!?

    Every time I try to download the new iTunes (which I need to work my iPhone) it takes abnormally long to download! So I decided to go on apple.com and download it straight from there. All in all - it begins to download - Estimated time: 6 hours... 13