Monitor user search

Hi all, please, I need some help to achieve this task...There is any way to know which words are the user of the portal searching for? like a monitor... I was thinking in a kind of filter or service for TREX engine.
Thanks.

Hi Eric,
we just did an upgrade in SRM to SP Stack 15.
In fact we are also not really pleased with the new search  - bus.partner id instaed of user id.
Anyway, we are in Germany and we don't know nothing about SOX and care a **** about it.
Just read that note 1344821 reverts the changes back to "normal".
In fact I can't get the note - I get a message:
"Der angeforderte SAP-Hinweis wird entweder gegenwärtig überarbeitet oder ist nur intern freigegeben"
English: The requested note is being re-edited or released for internal use only"
Do you have the note installed? Or do you know anything about it?
Help welcome,
kind regards,
Matthias

Similar Messages

  • OIM 11g r1 custom field in simple user search result

    Good morning,
    i need to visualize a custom field in the OIM simple user search result table. At the moment, when a simple user search is performed, the returned attribute is only the "Display Name".
    For the advanced user search result table, is possible to add other fields modifying the Search Results table configuration in Advanced->User configuration->Search Configuration.
    How can i do the same the for simple user search result?
    Thank you.

    Yes, i tried to add my custom attribute to both Simple and Adv search result table, but without luck. Only Display Name column attribute is shown when a simple search is performed.

  • Problem with users search

    Hello,
    I'm trying use the tasks functionality in portal however when I try to get the user to assign te task the search don't returns anything.
    I've used the standard demo also and it doesn't work, has somebody got this problem?
    thanks
    Wagner Moreira

    Hi Wagner,
    Typically you can do a wildcard search (using *) for first/last name and user ID, based on the attribute values defined for the user search. Please note that the return key on your keyboard does not start the search, but serves as a separator between multiple entries (you have to click "Select" to start the user search).
    You can change the configuration of the user search function delivered by SAP – the assignment of attributes to system users and the definition of the attributes relevant for the search – to suit the requirements of your company.
    For more details, take a look at http://help.sap.com/saphelp_nw04s/helpdata/en/b1/6a55422f4d3830e10000000a155106/frameset.htm
    Hope this helps
    Christian Stadler
    SAP NetWeaver Product Management

  • KM Search iView for User Search

    Hello,
    I am trying to create a new iView for User Search based on the KM Search iView Template. However, in the properties of the iView (Property Editor) there is no option to assign the ume index (contains users) to the iView. I previewed the iView, entered just a "normal" search term assuming that the iView would at least search for something, but the following error message occured. "TemplateError during search occurred - com.sapportals.wcm.WcmException: Index is corrupted, rollback required;index=ume,location=iwdf0003:39103 (Errorcode 2008)"
    Does anyone know how to solve this problem?
    Thanks a lot,
    Katharina

    Hi Katharina,
    now I understand. The problem is that you can't just use the KM search iView, you need to use a special iView based on com.sap.netweaver.coll.WhoIsWho or com.sap.netweaver.coll.WhoIsWhoNarrow. The configuration to be done (if you named the index for example not "ume") is described <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/05/a62c42de59da2ce10000000a1550b0/content.htm">here</a>.
    You can also find this iView in the com.sap.netweaver.coll.demo.CollaborationDemoRole role by navigating to Collaboration Demo -> People-Centric -> Who's Who.
    The steps on how to create the ume index are described <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/21/ac21410bc3ef23e10000000a155106/content.htm">here</a>.
    Hope this helps,
    Robert

  • Monitor user access (Fusion Middleware)

    Hi All
    Please advise if it is possible to monitor user login and logoff times when accessing any of the various fusion middleware components...
    Specifically SOA Suite 11g (Enterprise Manager, OSB, etc).
    I would like to audit and report on the time, duration, and tasks completed each time a user accesses any of the components mentioned above.
    I have come across a Product called [Oracle Enterprise Manager Grid Control] that might be suitable to my requirements.
    Your expert opinion in this regard will be highly appreciated.
    Regards

    Hi,
    You have to enable Audit Trail for this.
    http://www.oracle.com/technetwork/middleware/planning/tutorials/index-091248.htmlThanks,
    Avneet

  • Add user search functionality in a custom form

    Hi,
    I am new to IDM . I have two doubts regarding search functionality. Please help me out.
    1.     I want to add a user search option for a field and populate the value(user name ) from the searched result to that filed. The search option should have some search criteria like firstname ,lastname ,userid etc; depending on which we can search a particular user and after selecting one record that data should populate to that filed. Please let me know how can I archive that functionally? Is it possible to use the existing (out of box) search operation for it.
    2.     When we use selector, is it possible to change the default search option. I want to search depending on some criteria like firstname,lastname ,userid etc.
    Thank in advance.
    Regards,
    Nirupam

    I know this is old post - but I dealed with this requirement one and I knew it's pain. So, I just want to share my little expereinced here if someone else needed it.
    For this requirement - I have to customed the jsp pages. The file is tjspSearchUserTiles.jsp in the xlWebApp war file under tiles folder. What I did is check the current loging user's group. If he/she belong to Manager group, I set the search value Users.Manager Login equal to the username (this user name attribute alway available in the selvet section throught the USR BEAN.
    If you could make this cutomization work from your OIM env you then could customize alot more.
    Let me know if you need help - [email protected]

  • WCS Lobby Ambassador and Monitor User

    I'm running our WCS authentication through ACS with TACACS and it's working fine.  However, I currently have my Help Desk setup with a monitor user so they can login and view WCS, but this does not give them the Lobby Ambassador of course.  How can I get a user to have both WCS and Lobby access with having to login with seperate user identities?

    It's either admin either lobby account, you can not have both, the http pages are completly different and dont intermix.
    Your solution is to have 2 users on your TACACS where one is the admin and one the lobby.
    Here are the step by step config lines:
    http://www.cisco.com/en/US/docs/wireless/wcs/6.0/configuration/guide/6_0admin.html#wpmkr1064288

  • How to remove inactive session from monitor users in oracle apps 11i

    Hi All,
    when I am monitoring users from security- user - monitor in apps 11i, its showing many inactive users.
    I dont know how to remove them
    kindly help me.
    thanks in advance
    sagb

    Hi hsawwan,
    Thank you very much for the reply, it really worked fine.
    thanx again
    Sagb

  • Monitoring User in CRM Portal

    Hi All,
    Our company have finished CRM portal and this week we will doing a stress test by using portal system at a time with lot of user. How to monitoring users that have been logged into portal in one day?Not only the total number of user but also all user ID.
    I have try to monitoring from 'System Administration->Monitoring->Activity Reports' but it only show total number of user and the most active users (10) in last 3 hours. Any helpful answer will be rewarded. Thank You.
    Regards,
    Aleluya SAP.

    Hi,
    Use the trx: AL08 , where you can view the logged users data...
    Bye
    Ram

  • OAM Identity Server user search is very slow after upgrading to 10.1.4.2

    We recently upgraded Identity-Server from 7.0.4 to 10.1.4.2 + BP10. The new webpass (version 10.1.4.2) is on iPlanet webserver, which does not have any bundled patch available. After this upgrade, we found the user search is very slow. It is taking double the time compare to version 7.0.4. The search performance for NetPoint admin users is fine.
    The new version is connecting to the same LDAP (Sun 5.2) as the old one. The 7.0.4 version was well tuned (like Ldap connections, caching, etc) for the performance. The migration suppose to carryover those performance configuration to the new version. Is there any new parameter (related to performance) I should look for in version 10 ? Anybody have faced these issues after migration and found a fix for it ?
    Thanks!
    Kabi

    More in this thread - Re: OAM- "You do not have sufficient access rights" message with Master Adm
    -Vinod

  • RE: (forte-users) search and replace within aTextData

    Welll, you're both right. The MoveToChar makes it unnecessary (if a little
    sloppy) to MoveNext as long as you've changed the character. thus,
    outStr: TextData = new;
    outStr.SetValue(inStr);
    while (outStr.MoveToChar(' ')) do
    outStr.ReplaceRange('_', outStr.Offset, outStr.Offset+1);
    end while;
    return outStr;
    works fine to change blanks to underscores.
    Regards,
    David
    -----Original Message-----
    From: Campbell, Dave [mailto:DCampbellpurolator.com]
    Sent: Friday, 14 January 2000 0:58
    To: 'Matthew Middleton'
    Cc: kamranaminyahoo.com
    Subject: RE: (forte-users) search and replace within a TextData
    If you do not use the MoveNext method to skip beyond the "found" character,
    a subsequent invocation of MoveToChar will find the same character, located
    at exactly the same offset.
    If there is no match, MoveToChar returns FALSE and the current offset does
    not change.
    ----- Original Message -----
    From: Matthew Middleton <mathew.middletonlawpoint.com.au>
    To:kamranaminyahoo.com
    Unless I'm missing something here...you needn't go through every
    character...use MoveToChar()...as per Help...
    while (TextdataObj.MoveToChar (' ')) do
    end while;
    Regards,
    Dave Campbell
    Consultant,
    Caro Systems Inc.
    Mailto:Dave.CampbellCaroSys.com
    For the archives, go to: http://lists.sageit.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.sageit.com

    Why not this:
    while myText.moveToString(' ') do
    myText.ReplaceRange('-', myText.Offset, myText.Offset+1);
    end while;
    or if you prefer verbosity:
    while myText.moveToString(source=' ') do
    myText.ReplaceRange(source='-', startOffset=myText.Offset,
    endOffset=myText.Offset+1);
    end while;
    -----Original Message-----
    From: FatchJeBAM.com [mailto:FatchJeBAM.com]
    Sent: Wednesday, January 12, 2000 2:51 PM
    To: Troy.Burnsvacationclub.com; kamranaminyahoo.com
    Subject: RE: (forte-users) search and replace within a TextData
    How about this?? May have to play with start/end on ReplaceRange as I
    didn't really test this
    Anybody got a better way??
    -- replace space with underscore
    For x in 1 to myTextdata.LengthToEnd() do
    If myTextData.IsSpace() then
    MyTextdata.ReplaceRange('_'. Startoffset=myTextdata.offset,
    endoffset=myTextdata.offset+1);
    End if;
    MyTextdata.MoveNext;
    End for;
    Jerry Fatcheric
    -----Original Message-----
    From: Burns, Troy [mailto:Troy.Burnsvacationclub.com]
    Sent: Wednesday, January 12, 2000 9:40 AM
    To: kamranaminyahoo.com
    Subject: (forte-users) search and replace within a
    TextData
    Hello all,
    I need to search within a textdata object, replacing all
    occurrances of a
    space
    with another character. Can you give a quick code example
    of how I would do
    this?
    Thanks in advance,
    Troy
    Troy Burns
    Marriott Vacation Club Intl.
    E-mail: troy.burnsvacationclub.com
    Phone: (941) 688-7700 ext. 4408
    For the archives, go to: http://lists.sageit.com/forte-users
    and use
    the login: forte and the password: archive. To unsubscribe,
    send in a new
    email the word: 'Unsubscribe' to:
    forte-users-requestlists.sageit.com
    For the archives, go to: http://lists.sageit.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: forte-users-requestlists.sageit.com

  • Monitoring User Logins in Business One

    Hi,
    I'm wondering, is there a way to monitor users when they are logged in on B1 server?
    Thanks.

    Hi,
    Welcome you post on the forum.
    Only the file B1upf.xml holding that info you are looking for. You may open that file regularly to check the user connection. Or monitor the file update if you can. The file is under license folder of the server tool.
    Thanks,
    Gordon

  • GRC AC - HCM as user search data source

    Hello all,
    I´ve configured GRC AC to user HCM as user search data source and also user details data source. During my user change tests through the "Access Request" function, I noticed that only existent users at SU01 and HCM (checked through PA30) appear in the access request User Selection. Existent users at HCM but not at SU01 doesn´t appear.
    Someone can tell me why? I mean, if I configured the user search to use HCM as data source, shoudn´t it bring all HCM users regardless of his existence at SU01?
    Thanks in advance,
    Pedro

    Hi Pedro,
    You only have confirmed that 2 accounts are maintained in HCM and in SU01 as well, so you would be able to see these accounts' details both ways.
    Yes, you are right about user account maintenance first in HCM at the time of new hire, then you can manually raise the access request to grant them access to various SAP systems. Or in order to automate this process as Prasahant suggested, you can take help from HR Triggers.
    You can refer: GRC 10.0 - HR Trigger configuration - Governance, Risk and Compliance - SCN Wiki
    But responding to your original discussion, whatever user accounts are maintained in HCM you would see those details provided you define HR for the "user search data source" AND from SU01 for "user detail data source"
    In your case you have 2 accounts which have been maintained in HCM as well as SU01, so that is what creating confusion for you.
    Let us know if you need any more clarifications.
    Regards,
    Ameet

  • Why OID Connector User Search Reconciliation Sch. Job  Does Not Link Users?

    Hi,
    I provisioned a user to the resource successfully; then I ran OID Connector User Search Reconciliation Sch. Job sucessfully. When i check the Reconcillation Event results, i can see the event related with my Sch. Job but in the details of the event Linked To part is empty. I am expecting to see linking result but unfortunately no linking result represented. It says Not linked to any user as result of Linked User field.
    Do u have any idea?

    In Form, i have the following Additional Column with the following Field Label --> KK
    In the ReconAttrMap, i have the following mapping --> Code: KK Decode: uid
    In the Reconcillation Rule, i have the following Rule --> User Profile Data: User Login
    Operator: Equals
                                                 Attribute: Kullanici Kodu
                                                      Transform: None
                                                      Case-Sensitive: Unchecked
                                                      Properties Set: Checked
    Rule is Valid and Active and Using AND Operator
    In the Resource Object, i have the following Reconcillation Field --> *KK [String], Required*
    In the Resource Object, i have the following Reconcillation Action Rules --> Rule Condition: One Entity Match Found Action: Establish Link
                                                                          Rule Condition: One Process Match Found Action: Establish Link
    Then i click to the Create Reconcillation Profile.
    Job still does not link Users. Any missing settings?

  • User search in AD

    I have a question on AD user search. In AD, I have created OU and under OU, again created two sub OU's for Users and groups. I have 10000 users If I want to search for 500 users, How do I achieve it?
    Where do we specify mutliple OU? Under User Base DN or Group Base DN? Will it be something like uid=xxx,ou=OU1,ou=OU1,dc=BDC1?
    What will be my serach string in WLS to search for 500 users which are under OU of OU.
    Edited by: user734247 on Feb 24, 2012 6:53 AM
    Edited by: user734247 on Feb 24, 2012 6:56 AM

    I have a question on AD user search. In AD, I have created OU and under OU, again created two sub OU's for Users and groups. I have 10000 users If I want to search for 500 users, How do I achieve it?
    Where do we specify mutliple OU? Under User Base DN or Group Base DN? Will it be something like uid=xxx,ou=OU1,ou=OU1,dc=BDC1?
    What will be my serach string in WLS to search for 500 users which are under OU of OU.
    Edited by: user734247 on Feb 24, 2012 6:53 AM
    Edited by: user734247 on Feb 24, 2012 6:56 AM

Maybe you are looking for