Monitor won't resume from S3 on K8N Neo4

Put together the signature rig. Installed XP Pro SP2 on SATA with no problem. I have not done any overclocking as yet. Instead of buying a pci-express card, I took the cheap way out (since all my other video cards are AGP, which won't work on this board) & bought a pci video card. Problem is I can put system in S3, standby, & wake with mouse or keyboard, but monitor does not wake up. When I try to resume from standby, fans start, can hear drives start back up, etc. but monitor won't come up. Believe I have bios settings correct, but it's entirely possible that I've missed something which enables a pci video card to wake from standby. Have updated to latest beta drivers for video card. Latest nforce stand alone driver pack from nvidia, stand alone nforce_6.39_winxp2k, won't install. Says pci sys32 drivers corrupted & have to start windows at last known good setting. But I'm not sure if that is the correct version of latest drivers I should install. Anyone running K8N Neo4 with a regular pci video card? Can you bring it out of standby OK?

Thanks for the post, but I tried changing that setting, &, alas, did not work. On the suggestion of another forum, I went to the Nvidia site, downloaded what was labeled the latest Nvidia drivers for this board & tried to install them. That corrupted something or other, said windows could not start because of corrupted sys32 pci drivers. Had to start in "last known good" setting. Went to the download site for MSI motherboard, downloaded & installed the newest drivers from there, however. Have done a couple of system restores to try & get rid of some of the changed settings by all this stuff. Now after I try to resume from standby it sometimes resumes, fans etc. start up, then it shuts down, or goes into a restart. Been at this for a few days, not sure if I ought to just chuck the whole thing, buy a pci-express card, reformat & reinstall the OS. Either that, or just shut it down when I'm off for a while. Just kind of hate to buy another video card just to use this board.

Similar Messages

I7 iMac with Bootcamp 3.1 and Windows7 64-bit won't resume from sleep

When I try to resume from sleep, by clicking the magic mouse button, the screen comes up and I can move the mouse around but the bluetooth keyboard does not work and I can't launch any programs. Have to use the rear button to force a power off and restart.
Is anyone able to resume from sleep okay and carry on using Windows 7? If so, any tips? Thanks in advance, very frustrating.

I don't have an iMac, and it seems those have some design "issues" to say the least. I'd say yes, motherboard and/or firmware (UEFI or SMC, or both) could be buggy and at fault.
Other than resetting SMC and running Apple Hardware Test, not sure what else or next to try.
I've seen a number of BIOS updates out in the last months for my PC motherboards that have definitely improved sleep, S3, hibernation - EVGA, Gigabytes, and Intel - all X58 vs P55 (Lynnfield Core i5/7 LGA 1156) the iMac uses.
http://anandtech.com/cpuchipsets/showdoc.aspx?i=3634
http://en.wikipedia.org/wiki/IntelCorei5
First I switched to Windows Vista/7, then I switched to build-my-own and custom parts. Love the looks of iMac, came close at one point, but I prefer the specs, options, and configure for my own needs in hard drives, graphics over cool factors.
The iMac even in 2008 when it came with Penryn 64-bit processors never got 64-bit Vista/Boot Camp drivers, and that was why I didn't buy iMac back then, just lack of support I guess, and not seeing the market and need (for a good solid Windows desktop machine by Apple).

Pavilion 15 Windows 10 won't resume from sleep

Just updated to public release of Windows 10. When the computer goes to sleep, find that it won't resume - have to hold down the power button to get it to shut down, and then reboot it. Are there any updates to BIOS, or anything else, that I need to make to make this work properly, or is this just a Windows 10 bug (that hopefully they'll fix soon)? Thanks.

Yes. I agree. Not all problems were resolved completely. However, speaking to a Microsoft tech (Microsoft Support UK), he has alerted Microsoft to the problem and assures me there will be a patch as soon as possible. It is either a question of Bios being out of date or the display driver. I hope they are as good as their word, However, I agree, HP seem to have been a bit slow off the mark bearing in mind the number of threads relating to these issues with Pavilion! It is possible to check for Bios but one has to feel confident - have a look at this: Sleep, shutdown and hibernation issues after upgrading to Windows 10[ New ] http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Sleep-shutdown-and-hibernation-issues-after-upgrading-to/td-p/5213861Good luck!

Can't Boot from CD still K8N Neo4 MS-7125

I made several boot CDs, but am unable to boot from them. I don't have a floppy. I want to flash my bios. I tried to read every post related to my problem but could not find a match exactly so that's why I'm posting.
The error says
EMM 386 Address line A20 already enabled.
The other posts say to simply set the Gate A20 option to FAST. I went through my Bios settings several times and don't have any kind of Gate A20 option to set.
Win Xp tells me my Bios is v1.0 but my Bios says my Bios is 1.5 and I'm trying to Flash to v 1.8.
I've tried everything I could think of.
Win Xp Home
K8N Neo4 MS 7125 Platinum

I don't have access to the Internet on my computer, I'm typing this on my friends computer. I found a way to get around the problem though temporarily until I can figure out a way to create a bootable
CD.
My work around was this. I created several boot CDs from several different software programs, none of them worked. I tried Ultimate Boot CD UBCD. and there was an option called go to Dos level using Madboot. I went to DOS level and tried running the flash utility on my C: drive but it came back with the message ' unknown file or program'. Then I tried putting in a CD into the CDrom drive that I burned earlier with the files for flashing the BIOS and ran them from there. Why didn't they run on my C: drive and only on my CDrom drive? I don't know, but it worked.
Thanks

Partial solution to the "Video on Demand won't resume from paused/stopped point" issue

I don't know if there's a better place to post this...if so, plmelt me know.
I had the same problem - here's what seems to be working on my system (DVR model # QIP7232-P2).
If you're watching an on demand show, and wish to exit the show, but resume watching later at the point where you left off:
1. While your on demand content is playing, press the 'GUIDE' button on your remote. This should bring up the TV programming guide, with 'FiOS On Demand' showing as channel 900. Your on demand show should still be playing in the small box on the screen.
2. Use the number buttons on the remote to enter another channel, hit 'OK' to move the guide to that channel, then hit 'OK' again to change the TV to that channel.
This should save the on demand show at the approximate location (+/- 1 minute) where you stopped watching, and allow you to view other content (live TV; DVR recorded shows). When you're ready to resume watching the on demand show:
3. Bring up the On Demand menu (tune to channel 900 -OR- press the 'MENU' button on the remote and scroll down to VOD -OR- press the 'ON DEMAND' button on the remote).
4. Navigate to the show you were previously watching.
5. Hit the 'OK' button on the remote, and select 'Resume Play' from the option menu. This should resume the show within 1 minute of where you left off.
Again, it works on my DVR model, and so far, I've only tried it on the free network TV shows, but I don't see why it shouldn't work on other models/program types

This has worked for me to get a VOD to resume. Instead of selecting the video directly and pressing resume, try going to MY LIBRARY under the VOD menu and then MY RENTALS. Video should be there and every time I have done this the resume function worked. IMPORTANT - It won't if you try it from the normal selection method before going to MY LIBRARY as this resets the position flag to the beginning.
As with all unofficial "fixes" YMMV
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Monitor won't wake from sleep since 10.4.8 update

Since upgrading to 10.4.8 my display (Dell 2405FPW) wouldn't wake up from sleep mode (overnight only) and I'd just get a black screen (although it sounded like the CPU was powering up and working fine) ... but after visiting some Apple discussions I've done some troubleshooting ... and today, the Monitor DID finally wake up from sleep ... but the display was a pixelated mess(!?)
To date I have verified and repaired all permissions. I've zapped the PRAM. I've RESET the SMU and the NVRAM and I have deleted the PowerManagement.plist ... but this problem still persists, and it requires a restart to correct (which is maddening) Could it be an extension conflict? The video card? Power Supply? Sounds like a LOT of ibook and iMac folks are experiencing the very same problem.

Interesting, You, like me, have an undetermined sleep problem and a Dell 2405 FPW monitor with a built in USB 2 hub. Temporarily substitute another monitor to see it the problem persists. Also, did your G5 require a new PCI graphics card?
An ATI Radeon 9600 (PC/MAC Pro) PCI graphics card was installed on mine to handle that large screen Dell. Generally the system works again with a hard restart if it can't wake from sleep--try pushing the tower's front power button for more than 8 seconds and repeat this 8 sec restart if sleep persists. Mine sometimes goes to deep sleep even if the Energy Saver panel shows computer sleep "Never". Since the Dell was designed for a PC the Mac's auto detect mechanism for the sleep state of online monitors may be fooled by something in the design of the Dell monitor--only a theory--my Dell 2405 sometimes goes black and on again with mouse movements even though my sleep corner is turned off. I think I'll try a 24 hours with only my second Sony 17 inch monitor plugged into the card.
Is the USB cable from the Dell USB hub still plugged in? Was your G5 originally equiped with USB 2 ports or did you add a PCI USB 2.0 card? The Dell hub is USB 2.0 and it is logical, maybe even critical, to plug your high speed peripherals and the Dell hub in a USB 2 card while retaining original USB 1.1. ports for your wired keyboard (wireless keyboard might also be a problem) and other powerless (or AC plugged) peripherals--cameras etc.
This may also be a PCI card problem as I had a lesser problems with sleep even before I bought the DEll 2405 FPW and had only PCI SCSI and USB 2 cards from Adaptec. I 'll keep looking for solutions. Post if you find any. For further info see:
http://xlr8yourmac.com/firewire/fwusb_card_deepsleep.html#storytop

Monitor won't wake from sleep?

I just reinstalled OS 10.4.5 on my Powermac and have the screen saver set to go on after 10 minutes of inactivity. Instead, the monitor (NEC Multisync 95) goes into powersave mode and I can't get it to come back on. I also notice that my optical mouse appears to have gone to sleep also (i.e. the LED doesnt light up when I move it). Any ideas on how to fix this? Thank you very much.
PowerMac G4 AGP Mac OS X (10.4.5) 400Mhz, 448MB ram

Your system has gone to sleep, not to screen-saver mode. In sleep, the mouse LED is off, so moving it will not wake the system. Clicking the mouse or pressing a key should wake it. Screen saver mode is not useful unless you need a picture, or want to require a password to wake. Using "Display Sleep" in the "Energy Saver " preference puts the monitor in a low power mode.

T400 won't resume from standby after tampering with Intel ME functions

Hello,
I have a Lenovo T400 with XP SP3. Standby had always been working fine, but yesterday I disabled the Intel ME and AMT functions in the BIOS and also disabled the Intel AMT services in Windows.
When I pressed the power button this morning, I heard the hard disk spinning up, but the standby indicator stayed lit and the display did not activate. I had to force a power off to regain control.
The first suspect is the Active Management Technology, because I haven't installed anything particular that may interfere with power management. At the moment, I haven't had time to try and roll back the changes I've made, but I'm asking if anbody knows about similar issues or has an explanation ready, before I start doing things that may compound the problem.
Thank you,
/_urka
Solved!
Go to Solution.

Resetting the security chip, as suggested in another thread by tobes78, fixed the issue.
My T400 has been working correctly for some days now.
Before resetting the security chip, I tried all the following without result, but some updates may be required for the fix to work:
-updating BIOS
-updating ACPI drivers and PM software
-disabling Intel ME and AMT
I've left Intel ME/AMT disabled, because I don't really need it and I dare not try enabling it again.
However, it is not sure if the issue was caused by a firmware or a hardware defect and if that may cause other problems in the future.
Bye,
/_urka
Message Edited by Lurka on 02-10-2009 02:11 PM

Get Motherboard monitor 5.x to work with MSI K8N Neo4

Im trying to get the newest motherboard to work with my moterboard. All sensor display either 0°C or -127°C. It´s a MSI K8N Neo 4.. I know there is the corecell prog but it cannot output the temps to samurize

Quote from: Pertan on 04-March-05, 06:20:07
yepp i know that mbm is discontinued but it´s the best program that samurize reads temps and other things from.. I´ll try speedfan and se if samurize supports it
Samutize supports speedfan... I use it myself.
Got the speedfan running with auto-fan speed... So quiet... and fast response to temp. change
Looooovley .....

"K8N Neo4" dual core? NOT Neo4-F or platinum or SLI

I have a K8N Neo4. <- period. msi seems conveniently to have forgotten about this model, it doesn't show up on their site at all. literally a week after I bought it, it looked like they repackaged it and put a "dual core ready" sticker on it.
just wondering if the F model was just a bios update, or if they're just pretending that a single core limited version of the neo4 never existed.
thanks
P.S. I tried to search for the answer before I posted, but all I found was people talking about their F or Platinum series and the dual cores they have in them.

Quote from: arpheztwig on 23-December-07, 02:39:41
well, the box didn't say it was an -F, and the box didn't say it was dual core ready, is it still possible it's the black?
does anyone know for sure that it ISN'T dual core ready? otherwise I'm going to assume that it is and buy a new processor, I'll let you know what happens.
"F" usually is not written. You must have this one---> K8N Neo4-F (PCB 1.0) in Black PCB, but if its somethink else from possibilities like K8N Neo4 Platinum (PCB 1.0) or K8N Neo4-FI (PCB 1.0) it doesn't matter, all boards support dual core CPU and shares same BIOS in same time.

Over saturated images when monitor resumes from sleep

Lately I started to get this weird beheviour from LR 2.7. each time my monitor resumes from sleep all image colors become extremely over saturated. All other apps and computer desktop are just the same so it's only LR.
I use a wide gamut LCD (HP LP2475w) which is calibrated using iOne Display 2.
If I restart LR the problem goes away. This only started a few days ago just after I started uploading new photos taken by a new lens (Sigma 30mm).
Any ideas?
Micha

Hi
I can sympathise with how annoying this must be - and although I haven't looked into it myself, I do recall several other posts over the last 18months or so, with the same issue.
I can't dig out the exact posts now, but maybe the following might lead somewhere?
http://webkit.org/blog/73/color-spaces/
http://docs.info.apple.com/article.html?artnum=302827
http://www.gballard.net/psd/golive_pageprofile/embeddedJPEGprofiles.html
sorry I can't locate the threads I remember- I found one or two, but they were un-answered.

No video when using external monitor and resuming from sleep.

I know some people were having problems with the new MacBooks, but I guess the Mac driver fixed something. However, when I'm in Windows and have my Dell 24" hooked up to the Mini DisplayPort -> DVI adapter, I cannot resume from sleep. The monitor will turn on, but I can't get an image on it.
In MacOS it seems to resume from sleep fine, but not in Windows. Anyone else seeing this?
Thanks!

Is no one else getting this error? Does anyone have any issues when their MacBook is hooked up to an external monitor and it goes to sleep?

When on a job web site and you have to upload your resume apple needs to come up with a update so you can do so. When I try to upload my resume from my adobe reader or iBooks it keeps on going to photos and won't upload from the adobe or iBooks.

Please come up with an update that will allow people to upload their resume from iBooks or Adobe reader to the website of there choosing using safari. It only gives you the option to upload a photo a take a photo. The iPad or any tablet is going to take over as far as computers are concerned because it's easy to Cary with you and people like the fact of something a lot smaller to carry around then the laptop. Please help need this done like yesterday. Other then that all the apple products I have, has always been the best and they will outwork any windows based or android. You get what you pay for and apple is top dollar.

Hello Wyodor,
thanks for your reply on my question.
You are wright the index file is 308 KB.
And offcourse that I delete my files and documents is not an Iweb problem, but because my English is not that good, that I thougt I try to tell the whole story, and hope people can read trough the lines.
Why I didn't use Iweb to upload to the server is because the server company recommanded to use file zilla. And I am a nobody with this kind of things, so I did exactly what they tell me to do.
No, i did not make a backup of Iweb and the domain file, but reading other messages on this forum showed me that I can maybe try to make empty the cashfile (?)
and otherwise I have bad luck and have to make my website again. Offcourse I have a lot of examples from all the pages (copied from the local map to my USB stick) and my website is aprox. 15 Mb, (not so big) so it will cost me a few nigths.
But I'm still hoping on a miracle :-)
greetings Lasource

Windows 8 won't find any airport after resuming from standby

Hi,
I have had a windows 7 PC with both airport express (2nd and 3rd generation) working flawlessly. I bought a new Windows 8 Laptop. Initially everything worked fine, but after resuming from standby mode (closed the display and reopened) my itunes stopped working, and the airport utility software was unable to find both airport express. After shutdown and restart they both worked again until the next standby mode.
I've read somewhere that it might be a conflict with IPv6 so I disabled it from registry, but the problem remains.....
any thoughts
Regards,
German

Did you upgrade the drivers from the wireless card manufacturer in win8 machine.. ??
If that doesn't work.. do some more basic wireless investigation..
1. Are wireless names SMB compliant.. ie short, no spaces and pure alphanumeric?
2. WPA2 Personal security with a password which also conforms to the above.
3. Test with fixed wireless channels. 11, 6, 1
4. If none of the above work.. turn off security for a few minutes and see if that works.

Upon resuming from sleep, the monitor goes black

the laptop is actually booting, but the screen flashes on for a sec then goes dark. I can still see the screen and icon to log in, but the backlight is out, and I cannot log in actually. if I close the lid and wait then open it again, it does it again. I takes sometimes 5 times for it to finally stay lit and work again. This also happens if I do a hard boot, sometimes taking up to 8 times with a hard boot. I thought it might be related to the OS so I installed a partition and installed windows but it happens the same to windows. It never goes out when I am working on it, only if I let it go to sleep or power it off and then try to resume or turn back on. Any ideas?

Fix - *Dont give your iMac a static IP*
go to your Main or First routers settings and Give the iMac a SET IP so that it never changes. Then renew your DHCP lease and that set IP will come up and stay there. FOREVER!
I just resumed from sleep and it is not doing it anymore.

Monitor won't resume from S3 on K8N Neo4

Similar Messages

Maybe you are looking for