Monitoring 5.1 in STP with 5.1 Headphones

Monitoring 5.1 in STP with 5.1 Headphones:
Hi,
I'm needing to monitor my 5.1 surround sound multichannel mix and eventual multitrack AIFF file export and was trying to avoid having satellite speakers and expensive set ups. I was looking at the Tritton AX Pro True 5.1 Headset which seems to support the optical output of my 2.8 GHx Intel core i5  iMac. (This is the bit I'm unsure of)
http://www.amazon.co.uk/dp/B0017IUFAE/ref=asc_df_B0017IUFAE2694837
Does this sound like a solution?  (excuse the pun) It also would mean I could listen to DVD's in 5.1 surround sound.
The reviews are good but it's the compatibility with the optical out and Soundtrack Pro that's the need to know.
Thanks for any help in advance.

Thanks Barreltone,
I actually bought and tried out the headset before returning it. Nice idea that just doesn't work with a 5.1 source; no rear wrap around coverage- just pushes the sound further to left and right.

Similar Messages

  • I have a mac book pro i want to have another monitor added and open garageband with 2 projects open is this possible.

    I have a mac book pro I want to use 2 monitors and have garageband open with 2 projects is this possible?

    GarageBand can open only one project at a time.  Project are treated differently from audio files; you can have many audio files open in QuickTime or other audio players, but GarageBand will always close the current project when you open a new one.
    If you have the newest GarageBand 10.0 and the previous version, GarageBand '11, version 6.0.5, you can open one project in GarageBand 10.0 and one project in GarageBand '11.
    However, you cannot drag and top between the windows or transfer media. And once a project has been converted to GarageBand 10 format, it can no longer be opened by GarageBand '11.

  • Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

    Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

    haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

  • [Blog] Monitoring WebLogic J2EE on VMware with VMware vCenter Operations (vCOps)

    Monitoring WebLogic J2EE on VMware with VMware vCenter Operations
    The Blue Medora vC Ops Management Pack for Oracle OEM was updated in early May (2014) to include enhanced support for Oracle WebLogic J2EE integration. All of the Oracle EM target types for WebLogic related components including WebLogic Server, J2EE Application Deployments, Oracle HTTP Server, as well as WebLogic Cluster are now available to be ingested into VMware vC Ops Enterprise Edition. 
    With the data available within these new vC Ops 'Resource Kinds', you have the ability to create WebLogic on VMware relationship views, WebLogic on VMware mashup dashboards, as well as leverage vC Ops anomaly detection and predictive analytics on your WebLogic J2EE landscape. Below are a number of example dashboards that were easily created using the WebLogic data available within the Management Pack.
    The first dashboard, the WebLogic on VMware Relationship View -- helps you visualize your WebLogic environment running on VMware all the way down to the VMware VM, ESX, and even Datastore level.   This can useful for diagnosing critical J2EE applications running within the vSphere environment -- allowing you to quickly discern whether a problem exists in the Oracle WebLogic layer or one of the VMware virtualization layers.
    vC Ops Management Pack for Oracle EM - WebLogic on VMware Relationship View
    Continued here: Monitoring WebLogic J2EE on VMware with VMware vCenter Operations | Blue Medora

    Can you point me to recommendations on installing Hyperic on VMware virtual appliances?
    Is it as simple as treating the appliance as a Linux VM during installation?  Can vSphere be used to deploy Hyperic to a VMware appliance like vRA (non-IAAS)?
    Thanks,
    -MattG

  • SAP B2B dashboard monitoring and it's features with examples/screenshots

    Hi All,
    I'm looking for SAP B2B dashboard monitoring and it's features with examples/screenshots. Can you guys help to detail it out pls
    thx
    mike

    Hi Michael,
    I have the impression that there is some misunderstanding wrt b2b monitoring in PI/PO. Let me shed some light into this.
    The b2b monitoring as part of the b2b add-on and PI is actually an enhancement of the standard message monitor in PI. We have implemented a b2b view which shows you the b2b specific attributes such as sender id, ack status, interchange number, etc., instead of the PI specific information such as message GUID, sender party and component, etc. In addition, you can search the messages based on the b2b specific attributes. This works in tight integration with the Trading Partner Management (TPM) that we ship together with the b2b add-on where those partner specific attributes are maintained. You can access the b2b view either directly via the url mentioned above,.i.e., with alias /b2bmon or you can go to PI message monitoring via alias /pimon, this opens the a2a view, from here you can switch to the b2b view.
    The b2b view is only available as of 7.4 SP9 and b2b add-on SP4 as mentioned in the note 1815991 - Enhanced Local Message Monitor for B2B Messages. Since you are on a lower SP, this is the reason that you cannot see it.
    Whereas the local monitoring in PI gives you a status overview of your messages processed on the very PI runtime component, the Message Flow Monitor in SAP Solution Manager can be used for tracking your message from end-to-end, i.e., it provides you the status on each runtime component that the message goes through. Here, we also do support b2b scenarios. Like in the local b2b view, we show the ack status for technical and functional acks as well. Furthermore, we have built in a b2b specific search based on the TPM attributes.
    I planned to write a blog on the new b2b view but haven't found the time so far, so stay tuned.
    Alex

  • My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what c

    My problem is that after upgrade to IOS 6.1.3 my iphone not sounds! dont have sounds notifications for whatssap, FB, mails and can't listen music and talk with skype without headphones or speakers! only have vibrator and sound for one coming call!! what can i do!???? Thanks a lot for help me!!!!

    I have a nearly identical problem with my Ipad 3. Mine is the left channel. I've yet to find help, but have found a number of other posts on this and other forums discussing the issue. People have tried restore, reset etc. Also, cleaning the ports with compressed air or cotton swabs. It appears to be a software issue, but no one is sure.
    Along with the original poster, I'd appreciate any help.
    As far as the 'level 6' poster, if you're going to be rude, please don't bother. Hope it was just a bad day.

  • I am having problem with pairing my headphones

    I am having problem with pairing my headphones its just searching for ever and no options to search by name of device or number

    Have you put the headphones in "discovery mode"?

  • Audio in is working, but no audio out on internal speakers (with or without headphones.)

    Audio in is working, but no audio out on internal speakers (with or without headphones.)

    Reset PRAM.   http://support.apple.com/kb/PH18761
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    Best.

  • I cannot get my new Ipod Nano to pair with my bluetooth Headphones. It just searches endlessly.  These same headphones work with my blackberry playbook.  Does Apple only allow certain bluetooth devices to pair?  i.e. only the ones sold on their site?

    I cannot get my new Ipod Nano to pair with my bluetooth Headphones.  It searches without finding it. This headset works fine with my blackberry playbook.  Any suggestions? 

    thanks for reply... I saw on the Nano package that it is only compatible with bluetooth 4v.  Is that the same as A2DP.
    That's probably the problem... it wasn't a high-end headset. 

  • My head phone jack isn't working. Only works with the new headphones that have three rings at the bottom. My regular ones with two rings don't work with the computer anymore. Anyone know a fix?

    My head phone jack isn't working. Only works with the new headphones that have three rings at the bottom. My regular ones with two rings don't work with the computer anymore. Anyone know a fix? Ive tried reseting my computer and that didnt work

    Get the new keyboard at eBay and replace by yourself may be cheaper way, though you're required higher skill and well know about MacBook Air.
    http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0 .Xmacbook+air+2011+keyboard&_nkw=macbook+air+2011+keyboard&_sacat=0
    https://www.youtube.com/watch?v=gLbasVD69xo

  • I was listening to music with my apple headphones in my ipod touch then as i pulled the

    i was listening to music with my apple headphones in my ipod touch then as i pulled the headphones out part broke inside the ipod and i cant get it out, what should i do ?

    Have you gotten your iPod fixed sence? I have the same prob and need help

  • How do I use Cisco MARS to monitor two ASA (active/stby) with IPS modules?

    Hi
    The two ASA with IPS modules are in active/standby mode. When I try to add both the two IP (active/standby) into the MARS, the MARS will complain duplicated hostnames.
    How to setup MARS to monitor ASA with IPS with active standby topology?
    Thanks!

    Hi,
    The fundamental problem with this scenario is that you have non-failover capable modules in a failover chassis - think of the ASA failover pair as one device and the IPS modules as two completely separate devices.
    Then, as already mentioned, add only the primary ASA. (The secondary will never be passing traffic in standby mode so it's not actually needed in MARS) Then, with the first IPS module you can add it as a module of the ASA or as a standalone device (MARS doesn't care). With the second IPS module the only option is to add it as a separate device anyway.
    In a failover scenario the ASA's swap IP's but the IPS's don't so whereas you'll only ever get messages from the active ASA you'll get messages from both IPS IP's depending on which one happens to be in the active ASA at the time.
    Don't forget that you have to manually replicate all IPS configuration every time you make a change.
    HTH
    Andrew.

  • Using a second monitor as the primary display with MiniDisplayPort

    I've got a new iMac, but the screen seems to be straining my eyes. I'm trying things like scaling the display, lowering brightness, changing desktop layout, etc, but if all else fails...I'd like to go back to my old external monitor.
    So, my question is...if I connected this monitor to the MiniDisplayPort on the iMac, could I use it as a single primary display, or would I have to use it as mirrored or secondary?

    Hi Brian,
    Thanks for using Apple Support Communities.  You can mirror the displays or make whichever display you want the primary in Extended Desktop mode.  See this article for details:
    How to use multiple displays with your Mac
    http://support.apple.com/kb/HT5019
    The white bar at the top of the left blue box represents the menu bar and determines which display is your primary display. To change your primary display, click the white bar and drag and drop it on the blue box representing the display you would prefer to be your primary display.
    Cheers,
    - Ari

  • Monitor not able to connect with Dell Laptop

    Hi,
    I have a dell Laptop Dell inspiron 3521 this has got only an HDMI Port as output, I can connect this laptop to other monitor, & TVs with HDMI but cannot do so with my HP2311F Part number LA176AA. I have also tried to connect the latptop using a HDMI to VGA convertor.
    Manish

    Hello Manish_Das,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I see that you are not able to connect to your HP monitor, and I would be happy to assist you! To begin, I will need to ask you a few questions:
    What version of Windows do you have installed on your computer?
    Has your computer completed all of its important Windows Updates?
    Are you able to connect your monitor to a different computer?
    In the meantime, I recommend following this document on when the Monitor is Blank. This should help diagnose any possible connection or hardware issues that may be present. In addition, I also suggest downloading the HP 2311f 23 inch Diagonal LED Monitor Drivers for your laptop.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My Samsung monitor won't show image with G5??

    HAD a 2004 G5 with the ADC (or ACD?) card and Apple Display and everything worked fine when using a VGA to DVI connector and connected my small Samsung monitor. I could do dual monitor. Now I sold the G5 and bought a late 2005 model with the normal DVI connections on the card and when I used the VGA to DVI connector, I get a black screen from the Samsung. Im lost as to why it would do this? I connected to a nice Samsung with DVI and it worked, but I don't understand why It wont work on my first Samsung via VGA to DVI? Help!

    thanks

Maybe you are looking for